Used Scratch Machine for sale (65,430)

Condition: excellent (used), Year of construction: 2003, Tool holder, vertical + horizontal SK 40 Table size L x W 710 x 315 mm Speed range, vertical spindle 63 – 2500 rpm Speed range, horizontal spindle 45 – 1800 rpm Travel ranges: X-axis, longitudinal adjustment, automatic / manual 400 / 420 mm Y-axis, cross adjustment, automatic / manual 220 / 228 mm + cross slide 375 mm Z-axis, vertical adjustment, automatic / manual 350 / 380 mm Adjustment of the quill, vertical, manual 80 mm Machine dimensions, approx. 1550 x 1620 x 1850 mm Machine weight, approx. 1300 kg Lhedpfx Asziutzoh Sjn Accessories / Special features: • 3-axis digital display, manufacturer HEIDENHAIN • Infinitely variable feeds with rapid traverse in the 2nd feed stage • Two working spindles for horizontal and vertical tool holders (vertical milling head does not need to be removed during machining when the horizontal spindle is in use) • Ball screw spindles for the X and Y axes, simultaneous milling in X and Y direction possible • Trapezoidal screw spindle, hardened and ground, for the Z axis (vertical) • All operating elements on one side, in the mobile control panel • Additional manual adjustment of the cross slide increases the working area of the machine, even beyond the table surface • Safety handwheels • Tool holder according to DIN 2080 – steep taper ISO 40 • Automatic central lubrication for speed and feed gears • Vertical milling head with quill, swiveling L+R • Fixed angle table 315 x 710 with 5 slots 12 mm, spacing 63 mm • Tool clamping spindles, horizontal and vertical • Splash guard made of Plexiglas on 3 sides of the horizontal table • Coolant system • CE compliant TOP condition! Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: good (used), Drilling capacity in steel St 37: Ø 40 mm Drilling capacity in cast iron: Ø 45 mm Spindle mount: MK 4 Overhang: 1300 mm Machine weight: 2700 kg Lhjdpfx Asz Icr Hjh Sjn Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, functionality: fully functional, Hydraulic mandrel tube bending machine Complete bending sets with bending mandrels and bending shoes: Ø 18, 20, 22, 25, 2 x 30 + 35 mm Additional bending mandrels, but without bending shoes: Ø 28, 2 x 38 + 42 mm Pre-assembly device with hydraulic cylinder Hydraulically driven deburring unit for tubes, inside and outside, from 6 - 48.3 mm Max. tube feed length: 3000 mm Machine weight: approx. 700 kg Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 Lhsdpfxswnrt So Ah Ssn D - 44143 Dortmund - Wambel / Germany

Condition: excellent (used), Year of construction: 1993, Spindle mount, vertical SK 30 Speed range 265 – 3000 rpm Drive power 1.5 / 2 hp Spindle mount, horizontal SK 30 Speed range 50 – 1500 rpm Drive power 3 / 4.2 hp Table clamping surface 800 x 200 mm Longitudinal travel X-axis, automatic approx. 550 mm Transverse travel Y-axis, automatic approx. 175 mm Vertical travel Z-axis, automatic approx. 400 mm Distance between table and milling spindle 300 mm Feed speeds, stepless 30 - 340 mm/min Rapid traverse yes Dimensions L x W x H approx. 1300 x 1200 x 2050 mm Weight approx. 900 kg Accessories / Special features: • 3-axis digital display ELESTA Visulesta 2E Lodjzbikmspfx Ah Sehn • Vertical milling head SK 30 with high speed of 3,000 rpm + boring quill, swiveling left-right • Horizontal milling attachment SK 30 • Rapid traverse + feed in all 3 axes, feed steplessly adjustable via potentiometer on the control panel • Rotary table that can be swiveled left-right with drive capability for a dividing head • Coolant system • 2-stage main motor • Central lubrication This very good GUALDONI machine comes from an educational institution and can be inspected and demonstrated under power at any time after prior appointment. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: excellent (used), Year of construction: 1955, Drilling capacity in steel St 37: Ø 65 mm Drilling capacity in cast iron: Ø 75 mm Spindle mount: MK 5 Overhang: 1250 mm Spindle stroke: 400 mm Spindle speeds: 22.4 – 1800 rpm Feed range: 0.056 – 0.56 mm/rev Column diameter: Ø 300 mm Lodotwzk Djpfx Ah Sjhn Motor power, 2-stage: 3.6 / 4.8 kW Clamping area, base plate: 1320 x 1000 mm Dimensions L x W x H (with motor!): 2250 x 1000 x 3100 mm Transport dimensions L x W x H (without motor!): 2250 x 1000 x 2800 mm Weight: 5100 kg Accessories / Special features: • Square table L x W x H 650 x 500 x 500 mm • Central clamping device • Feed mechanism • Right-left operation • Motorized vertical movement • High speed range up to 1800 rpm • Coolant system • Lighting Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: 1125318, SPECIFICATION Travel X axis stroke 762mm Ljdpfswx I N Dex Ah Sohn Y axis stroke 406mm Z axis stroke 508mm Distance spindle nose to table 102-610mm Table Width 536mm Length 914mm Max. Weight on table 1361kg T Slots: width 16mm : pitch 125mm   SPECIFICATION Cont’d Spindle Taper size No.40 Speed 0-8100rpm Bearings Bearing lubrication Air/oil injection Cooling Liquid cooled Motor Spindle motor, max. rating 22.4kW Feedrate Rapid X, Y & Z axis 25.4m/min Max. Cutting feedrate 16.5m/min Toolchanger Capacity 20 tools Type BT40 General Approximate machine weight 3750kg Air supply (min) 113lpm, 6.9 bar MACHINE EQUIPPED WITH: - Haas (Fanuc compatible) CNC Control system Programmable coolant nozzle Automatic lubrication system Enclosed guarding Swarf auger

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, OMN RV-500 Lhjdpfx Ahez R Rpnj Ssn Includes cooling system, dressing unit, and magnet.

Condition: good (used), Year of construction: 1985, bore capacity in steel (diameter) 35.0 / 40.0 mm throat 315 mm bore stroke 180 mm turning speeds 130 - 3500 U/min table-size 615 x 470 mm Lodpfx Ahez S N Dre Sjhn column diameter 155 mm feed 0.1 / 0.2 / 0.3 mm/U spindle taper MT 4 MK engine output 2.0 / 2.4 kW weight 450 kg range L-W-H 800 x 650 x 2100 mm Features: - Heavy-duty column drill press - With extended column (200 mm) - Drive: "VARIO" V-belt * Continuously variable speed control - automatic spindle feed (0.1/0.2/0.3 mm/rev) * with electromagnetic engagement - pole-changing motor - clockwise rotation of the drill spindle - adjustable fixed drill depth stop - Machine table with 2 T-slots * Height-adjustable via hand crank - Machined base plate - Coolant system in the machine base - Machine light - Emergency stop button on the front - Operating instructions (PDF)

Condition: good (used), Year of construction: 2001, bore capacity in steel (diameter) 40.0 mm bore capacity in cast iron 55.0 mm throat 335 mm bore stroke 200 mm Lhsdpez S N Dxjfx Ah Sen bore spindles - Morse Taper MK 4 turning speeds 60 - 1.530 U/min table: 740 x 620 mm feed 0.15/0.2/0.3/0.36 mm/U total power requirement 2.6 / 3.1 kW weight of the machine ca. 850 kg range L-W-H 800 x 1150 x 2040 mm Machine comes from a vocational training workshop Good condition (!!) Features: - Heavy-duty/robust bench-mounted drill press - Drive: "VARIO" V-belt - Automatic spindle feed (0.15/0.2/0.3/0.36 mm/rev) - Stepless speed adjustment - 2 work tables with T-slots * Height-adjustable via hand crank - Adjustable drilling depth stop - Pole-changing motor - Machine light - Emergency stop button, front - Operatorâ??s manual

Condition: used, total length: 7,800 mm, total width: 1,700 mm, total height: 1,580 mm, Year of manufacture: 2005 Colour: Green Empty weight: 11.000 kg Price: On request - Year: 2005 - Documentation available: No - CE certificate present: No - Drive system: Conventional - Drive: Hydraulic - Number of rolls [pcs.]: 4 - Number of driven rolls [pcs]: 2 - Max. sheet thickness [mm]: 12 - Max. prebending thickness [mm]: 10 - Max. working width [mm]: 2500 Lhjdpfx Ahjzkkrvj Sjn - Top roll diameter [mm]: 360 - Bottom roll diameter [mm]: 300 - Transport dimensions: 7800mm x 1700mm x 1580mm (l x w x h) - Transport weight [kg]: 11000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 1970, center width: 2,350 mm, center height: 2,400 mm, Max. blank / workpiece over bed:2400 Centre height over bed: 1200mm Distance between centers: 2350mm Length of the gap: 400mm Maximum sheet thickness: 6mm Stroke X-Axis: 1200mm Stroke Y-Axis: 300mm Speedrange: 6 - 675Rpm Power: 40kW Stroke pinole quill: 1200mm Length: 4500mm Width: 3200mm Lhedoxtaxwepfx Ah Son Height: 2500mm Weight: 10200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: reconditioned (used), MOSCA KPM 131 Pallet Strapping Machine with Swivel Turntable / Roller Conveyor Description For sale is a used MOSCA KPM 131 pallet strapping machine with an integrated swivel turntable roller conveyor and pallet centering system. The system is designed for the automatic strapping of palletized products and features an integrated swivel turntable roller conveyor with a diameter of approximately 1,800 mm. The swivel turntable allows the pallet to be rotated within the system and positioned according to the desired strapping direction. The machine is suitable for Euro and industrial pallets with pallet runners in the direction of travel. A strapping head is adjustable, allowing for different strapping positions. Machine Data • Manufacturer: MOSCA • Type: KPM 131 • Year of Manufacture: 1996 • Control System: Siemens S5 • Throughput Width: max. 1,200 mm • Throughput Height: max. 1,600 mm • Integrated Swivel Turntable Roller Conveyor: Ø approx. 1,800 mm • Pallet Centering System • Adjustable Strapping Head Strapping Technology • Band Tension: continuously adjustable: 200–2,000 N • Band Speed: 4.6 m/s • Sealing Method: Friction Weld Seal • Band Guide Positions: 440 mm / 625 mm Press • Pressing Force: up to max. 50,000 N • Pressing Force adjustable via potentiometer • Drive via pole-changing geared brake motor • Rapid Traverse Speed: 150 mm/s • Pressing Speed: 37 mm/s Control Panel • Width: approx. 1,200 mm • Depth: approx. 650 mm • Height: approx. 850 mm Ljdpfx Ahjypwm Es Sohn Condition / Inspection / Integration Before delivery, the machine will be assembled in our workshop in Velbert and completely inspected mechanically and electrically. The strapping head and all relevant machine functions will be tested. Necessary wear parts will be replaced after technical inspection and in accordance with the agreed scope of services. After completion of the work, a functional test of the complete system will be carried out. Upon request, we will also take over the assembly, commissioning and integration of the MOSCA KPM 131 into the customer's existing production or conveyor line. This can include, among other things, the implementation of the necessary electrical interfaces, signal exchange and adaptation to the existing conveyor technology after prior technical coordination. A functional test or pre-acceptance at our plant in 42551 Velbert is possible by appointment. Transport, assembly, commissioning and integration can be offered separately. Subject to prior sale and errors.

Condition: used, Year of construction: 1975, functionality: fully functional, max. bore diameter to be ground 6 bis 100 mm stroke - stepless adjustable 550 mm grinding depth ca. 250 mm workpiece weight 150 kg Ledpfx Aheucgwke Sehn total power requirement 15 kW weight of the machine ca. 4.300 kg dimensions of the machine ca. 2,7 x2,4 x 2,2 m

Condition: used, Year of construction: 2000, functionality: fully functional, pointing milling machine für Stangen carbide turnover plates 4 Stück working area Rund, Profil+vierkant mm working range 80 (100) an 25 mm milling drive 380/420V, 18,5 KW, 50 Hz kW revolutions per minute Fräsantrieb: 1465 U/min Lhedpfx Ahsg Akgtj Ssn . clamping devices hydraulic pneumatic hydraulisch infeed device hydraulisch ca. 5 lfdm x 300 mm hydraulic power unit Rexroth tank 250 l coolant tank mit Spänekasten l switchgear cabinet mit Klimaanlage control SIEMENS S 7-300 +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Year of construction: 1987, condition: excellent (used), functionality: fully functional, 1987 Finzer ZUB 250 Multislide Punching & Forming Machine Used 1987 Finzer ZUB 250 multislide machine for sale. 250kN press unit, 6 forming slides, manual decoiler and 250mm feed. Very good condition. Manufacturer: Finzer Model: ZUB 250 Machine Type: Multislide Punching & Forming Machine Year: 1987 Condition: Very Good Machine Description The Finzer ZUB 250 is a heavy-duty mechanical multislide stamping, punching and forming machine designed for the high-volume production of complex components from strip and wire. This machine is equipped with a 250kN / 25-tonne press unit, a set of six forming slides and a manual decoiler, providing a versatile production system capable of combining punching, blanking, bending and forming operations within one production cycle. Multislide technology is particularly effective for components requiring several bends or forming operations from different directions. Compared with conventional single-slide power presses, the multiple independently arranged forming slides allow complex parts to be produced efficiently with reduced secondary operations. Main Specifications Manufacturer: Finzer Model: ZUB 250 Year: 1987 Machine Type: Multislide Punching & Forming Machine / Stamping & Bending Machine Press Capacity: Approx. 250kN / 25 tonnes Number of Forming Slides: 6 Maximum Feed Length: Approx. 250mm Maximum Strip Width: Approx. 60mm Maximum Wire Diameter: Approx. 3mm Forming Slide Capacity: Approx. 30kN per slide Forming Slide Stroke: Approx. 0–50mm Maximum Production Speed: Up to approx. 400 strokes/minute, depending on tooling, component and material Machine Weight: Approx. 4,000kg Lhsdpfxsz S T Inj Ah Ssn 250kN / 25 Ton Press Unit The machine incorporates an approximately: 250kN / 25-tonne press station The press operation can then be combined with movements from the surrounding forming slides to produce complex finished components in a continuous cycle. Six Forming Slides This Finzer is supplied with a complete set of six forming slides. The multiple-slide arrangement is one of the main advantages of the ZUB system, allowing tooling to approach the component from several directions during the same production cycle. Forming capacity per slide: 30kN Slide stroke: Adjustable up to approximately 50mm The slides can be tooled for sequential bending, forming and positioning operations. Manual Decoiler Included The machine is supplied with a manual decoiler for coil-fed production. Coil & Strip Feed Capability Comparable Finzer ZUB250 machines are specified with: Maximum Strip Width: Approx. 60mm Maximum Wire Diameter: Approx. 3mm Maximum Feed Length: Approx. 250mm Feed length is typically adjustable to suit the individual component and tooling setup. High-Speed Production Depending on component design and tooling, period ZUB250 specifications quote operating speeds of approximately: 25–400 strokes per minute This makes the Finzer particularly suitable for repetitive, high-volume manufacture where several conventional press and forming operations might otherwise be required. Mechanical Cam-Controlled Multislide System The Finzer ZUB series uses a mechanically controlled cam-driven forming system. Cam-controlled multislide machines are particularly effective for repeat production because the motions of the forming tools can be precisely coordinated with the press and material feed.

Condition: used, Year of construction: 1969, functionality: fully functional, overall weight: 5,500 kg, arm length 1600 mm taper MK 5 Würfel Lhedpfx Ahex H Txtj Ssn

Condition: new, STRUERS Metallographic Cutting Machine Struers Magnutom-5000 XYZR NEW / unused – Year of manufacture 2025 Automatic X-table with rotation and accessories New, unused metallographic cutting machine for the automatic cutting of large material samples. Not assembled or put into operation; stored in shipping condition. Technical data: Manufacturer: Struers Type: Magnutom-5000 XYZR Article number: Year of manufacture: 2025 Design: 4 axes with X-table and rotation Electrical data: Mains connection: 3 × 380–480 V / 50–60 Hz Motor power S1: 11 kW Motor power S3: 16 kW Rated current: 34 A Maximum current: 48 A Maximum load current: 31 A Cutting wheel – manufacturer’s specifications: Maximum diameter: 508 mm (20 inches) Cutting wheel thickness: 3.5 mm Inner hole diameter: 32 mm Speed range: 1,000–2,400 rpm Cutting capacity according to the manufacturer: Maximum diameter: 190 mm Other cutting ranges: 190 × 254 mm 184 × 400 mm 114 × 618 mm Depending on the workpiece and cutting process Cutting table and axes: Automatic X-table: 524 × 781 mm (W × D, max.) X-axis travel: 370 mm Rotary table: Ø 533 mm T-slots: 12 mm Cutting wheel positioning range Y: 395 mm Cutting wheel positioning range Z: 214 mm Dimensions and weight: Width: 1,758 mm Depth: 1,463 mm Height: 1,882 mm Weight according to nameplate: 2,510 kg Dimensions according to manufacturer’s brochure Cutting chamber – manufacturer’s specifications: Lhsdpfxsz Tfl Is Ah Sen Width: 1,000 mm Depth: 1,206 mm Height: 918 mm Equipment and functions: Automatic X-table with rotation Variable cutting wheel speed Direct drive AxioCut and OptiFeed AxioWash – automatic cleaning program Laser for cut positioning Cutting wheel monitoring Programmable cutting sequences and simulation Automatic XYZR movements Areas of application: Metallography, materials testing, sample preparation, Quality assurance, research and industry Scope of delivery according to parts list and original photos: 1 × Struers Magnutom-5000 XYZR – Art.-No. × Coolimat-2000 band filter – Art.-No. × Water level indicator – Art.-No. × COLMF magnetic filter – Art.-No. × Signal lamp – Art.-No. × Collection tray 4,080 × 2,000 × 50 × 3 mm – DE-730200 1 × Service kit Magnutom-5000 – Art.-No. 16582999 Additional accessories according to documented delivery condition. Notes on cooling and commissioning: Coolimat-2000 band filter included according to the parts list. Circulating cooling unit and clamping tools for 12 mm T-slots must be ordered separately according to the sales documentation. Check the scope of the cooling system before commissioning. Condition: NEW / unused, year of manufacture 2025 Not assembled or put into operation Main unit securely packaged for transport Accessories partially in original packaging Original purchase price (net): €140,744.00 Assembly and commissioning are not part of the offer and must be arranged by the buyer. Weight: 3100 kg Shipping by freight forwarder possible upon agreement. Subject to change, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, Year of manufacture: 2014 Colour: White Empty weight: 4.500 kg - Machine available from: 2026-03-30 - Year: 2014 - Documentation available: Yes - CE certificate present: Yes - Serial number: AA1/017825 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 5 Lhodpfxox Hwhxs Ah Sen - Type milling table: Beam table - Tool holder: HSK-F63 - Drilling unit present: Yes - Tool changer positions [pcs.]: 12 - System/software: SCM Maestro - Safety feature: Enclosed fence, Safety light curtain - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: Becker - └ Type: VTLF 2.250/0-791 - └ Year of manufacture: 2014 - └ Main motor power [kW]: 5.5 - └ Capacity [m³/h]: 244 - └ Vacuum pressure [bar]: 200 - CNC options: Manual control - CNC documentation available: USB stick - Working range X [mm]: 5200 - Working range Y [mm]: 1550 - Z-axis working range [mm]: 160 - Installed length [mm]: 9000 - Installed width [mm]: 5000 - Installed height [mm]: 3100 - Transport weight [kg]: 4500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, operating hours: 11,517 h, total height: 2,880 mm, total length: 10,000 mm, total width: 2,700 mm, Year of manufacture: 2014 Colour: White Empty weight: 6.000 kg - Year: 2014 - Documentation available: No - CE certificate present: No - Serial number: 070614/B/1-407 - Operating hours: 11517 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 4 - - Main motor power [kW]: 10 - - C-axis present: Yes - Type milling table: Flat table - Drilling unit present: Yes - └ Motor power [kW]: 3.6 - └ Horizontal drill spindles [pcs.]: 6 - └ Vertical drilling spindles [pcs.]: 18 - Tool changer positions [pcs.]: 12 - System/software: TWINCAT - Safety feature: Safety mat, Enclosed fence - Vacuum pump present: Yes - └ Number [pcs.]: 2 - └ Brand: Becker - └ Year of manufacture: 2023 - └ Main motor power [kW]: 18.5 - └ Capacity [m³/h]: 600 - └ Vacuum pressure [bar]: 250 - └ Oil free: Yes - CNC documentation available: USB stick - Table length [mm]: 5150 - Table width [mm]: 1600 - Working range X [mm]: 7220 - Working range Y [mm]: 1580 - Z-axis working range [mm]: 180 - Voltage [V]: 400 - Transport dimensions: 10000mm x 2700mm x 2880mm (l x w x h) - Transport weight [kg]: 6000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Lodpfx Ajx E Uk Ush Sohn Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, total height: 1,850 mm, total length: 2,300 mm, total width: 1,950 mm, Year of manufacture: 2015 Lodpfx Ajzavvgoh Sjhn Colour: White Empty weight: 1.240 kg - Year: 2015 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: AB/222595 - Main motor power [kW]: 2.2 - Number of controlled axes [pcs]: 12 - Working range X [mm]: 3050 - Working range Y [mm]: 800 - Working range Z [mm]: 60 - X-axis max stroke [mm]: 1040 - Y-axis max stroke [mm]: 1030 - Z-axis max stroke [mm]: 100 - Number of milling spindles [pcs]: 8 - Spindle diameter [mm]: 10 - Min. spindle speed [rpm]: 1000 - Max. spindle speed [rpm]: 4000 - Horizontal drilling unit: Yes - Horizontal drilling spindles [pcs]: 6 - Max. drilling depth [mm]: 18 - Vertical drilling unit: Yes - Vertical drilling spindles [pcs]: 8 - Max. drilling depth [mm]: 30 - Saw unit present: Yes - Safety feature: - Voltage [V]: 400 - Current consumption [A]: 10 - Transport dimensions: 2300mm x 1950mm x 1850mm (l x w x h) - Transport weight [kg]: 1240kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, total height: 2,400 mm, total length: 5,300 mm, total width: 2,350 mm, Year of manufacture: 2022 Colour: Grey Empty weight: 4.000 kg What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! - Year: 2022 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 30B.11.040.22 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 4 - - Max. spindle speed [rpm]: 24000 - - Main motor power [kW]: 11 - Type milling table: Beam table - Tool holder: HSK-F63 - Material clamp system: Pneumatic - Drilling unit present: Yes Lhjdpfx Ahozwul Ho Son - └ Horizontal drill spindles [pcs.]: 4 - └ Vertical drilling spindles [pcs.]: 12 - Saw unit present: Yes - Tool changer positions [pcs.]: 12 - System/software: WoodFlash - Safety feature: Safety light curtain - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: Becker - └ Type: PICCHIO 2200 - └ Year of manufacture: 2022 - Tools included: Yes - CNC options: Manual control - CNC documentation available: User keys/licenses, USB stick - Table length [mm]: 3300 - Table width [mm]: 1280 - Working range X [mm]: 3300 - Working range Y [mm]: 1280 - Z-axis working range [mm]: 250 - X-axis maximum stroke [mm]: 4000 - Y-axis maximum stroke [mm]: 1670 - Z-axis maximum stroke [mm]: 500 - Voltage [V]: 400 - Current consumption [A]: 40 - Power [kW]: 18.0 - Installed length [mm]: 6250 - Installed width [mm]: 3494 - Installed height [mm]: 2300 - Transport dimensions: 5300mm x 2350mm x 2400mm (l x w x h) - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Used machine Used Hettich Blue Max drilling and countersinking machine Lsdpjw I Um Tsfx Ah Sohn Motor power: 0.8 kW Motor speed: 2800 rpm 4 drilling spindles with longitudinal stops one foot switch Punch die is missing!! Availability: by arrangement Location: Solingen

Condition: used, total width: 2,700 mm, total height: 2,900 mm, total length: 1,700 mm, Year of manufacture: 2003 Colour: White Empty weight: 3.000 kg Lhsdpfxjzkkd Se Ah Ssn - Year: 2003 - CE marking present: Yes - Serial number: 0312101 - Drive system: Conventional - Wet/dry: Dry - Number of stations [pcs]: 1 - └ Station type 1: Abrasive belt - Power [kW]: 32 - Max. working width [mm]: 550 - Transport dimensions: 1700mm x 2700mm x 2900mm (l x w x h) - Transport weight [kg]: 3000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total length: 1,800 mm, total height: 1,400 mm, total width: 2,250 mm, Year of manufacture: 1972 Colour: Green Lhjdpfxszm N Rio Ah Ssn Empty weight: 2.000 kg Price: On request - Year: 1972 - Control: Conventional - Transport dimensions: 1800mm x 2250mm x 1400mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total height: 2,500 mm, total length: 7,500 mm, total width: 3,700 mm, Year of manufacture: 2005 Colour: Grey Empty weight: 9.600 kg Price: On request - Year: 2005 - Documentation available: Yes - CE marking present: Yes - Drive system: CNC - Horizontal/vertical: vertical - Control system brand: Siemens - Power [kW]: 24.0 - Number of axes [pcs]: 4 - X-axis travel [mm]: 2000 - Y-axis travel [mm]: 500 - Z-axis travel [mm]: 550 - C-axis rotation [°]: 360 - Table length [mm]: 2600 - Table width [mm]: 550 - Tool holder: ISO40 - Main spindle power [kW]: 22 - Min. spindle speed [rpm]: 20 - Max. spindle speed [rpm]: 12000 - Positioning accuracy [mm]: 0.01 - Travel speed [mm/s]: 667 Lhodpfx Aszkudcoh Sen - Options: Tool magazine, Chip conveyor, External cooling - Transport dimensions: 7500mm x 3700mm x 2500mm (l x w x h) - Transport weight [kg]: 9600kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum