Used Kunzmann Wf4 3 for sale (72)

Condition: excellent (used), Year of construction: 2006, travel distance X-axis: 400 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 1 rpm, quill stroke: 60 mm, total height: 2,100 mm, total width: 2,100 mm, total length: 2,300 mm, table width: 450 mm, table length: 750 mm, rotational speed (max.): 4,500 rpm, rotational speed (min.): 1 rpm, overall weight: 1,900 kg, workpiece weight (max.): 500 kg, Travel X/Y/Z 400/350/300 mm, spindle spped 1 - 4500 rpm, motor 4,5 KW, spindle ISO 40, control Heidenhain TNC 320, table size 750x450 mm, hydraulic tool clamping, coolant device, spash guard, tool holders, manual Gusdpfx Agswb Erzo Neh

Condition: repair required (used), Year of construction: 1996, functionality: not functional, machine/vehicle number: 340547, travel distance X-axis: 400 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 400 mm, quill stroke: 60 mm, overall weight: 1,300 kg, table length: 650 mm, workpiece weight (max.): 250 kg, table width: 350 mm, power: 10 kW (13.60 HP), controller model: TNC 124, Equipment: rotational speed infinitely variable, The milling machine advertised is being sold as defective. The reported error: Gross positioning error on the Z-axis. The machine is otherwise in good condition and was used exclusively for training purposes. The following parts were newly installed by the service department: Gsdpfxewlqtfj Ag Nouh -Supply module -Z-axis assembly with brake -Z-axis position measuring system - Wipers on all axes - Filter mats -Synchronous belts -X-axis position measuring system - Signal converter for the measuring system The total cost for maintenance and repairs was €15,000. The error is still present. Due to the age of the machine and the modernization of the workshop, repairs have been discontinued. You are welcome to inspect the machine. All information is provided without any warranty.

Condition: excellent (used), Year of construction: 2002, Kunzmann WF4/3 Kunzmann WF4/3 Tool Milling Machine with Heidenhain TNC 124 Control, Year of Manufacture 2002 – Excellent CONDITION CE-compliant!! Technical Data: Gjdpfx Agjw U Exys Nsuh • Year of manufacture: 2002 • Fixed angle table • Spindle speed: infinitely variable up to 4000 rpm • Feed rates, infinitely variable in 3 axes: 0 to 2000 mm/min • Travel X/Y/Z: 400/350/400 mm • Rapid traverse X/Y/Z: 5 / 5 / 4 m/min • Table size: 650 x 350 mm • Table load: 250 kg • Vertical quill travel: 60 mm • Vertical and horizontal quill – SK40 • Hydraulic clamping system • Approx. weight: 1700 kg • Space requirements: approx. 2.3 x 2 x 2 m • Drive power: 12 KVA Accessories & Equipment: • Heidenhain TNC 124 Control • Hydraulic clamping vertical and horizontal • Automatic central lubrication • Spindle brake • Technical documentation, spare parts diagrams, control manual, and programming examples • Handwheels • Coolant system About the Machine: Offered is a Kunzmann WF4/3 tool milling machine equipped with a Heidenhain TNC 124 control unit. This universal milling machine is in excellent original condition. It comes from a facility where it was used only occasionally for training purposes. The control system is very user-friendly. Additionally, the machine features hydraulic clamping for both vertical and horizontal operations. Switching from vertical to horizontal operation is very simple, thanks to the fold-away vertical head. The guides are regularly lubricated via the central lubrication system. The Kunzmann has been mechanically and electrically tested in our facility. Take the opportunity to view and test the Kunzmann under power at our location. You can find more milling machines from renowned manufacturers on our website.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Tool Milling Machine Kunzmann WF4/3 with Heidenhain TNC 124 Control, Year of Manufacture 2010, Excellent Condition with Tooling, CE-Compliant!! Technical Data: >> Year of manufacture: 2010 Gujdpfx Aow Id Dzog Noh >> Fixed angular table >> Infinitely variable spindle speed up to 4000 rpm >> Infinitely variable feed on 3 axes from 0 to 2000 mm/min >> Travel (X/Y/Z): 400/350/400 mm >> Rapid traverse (X/Y/Z): 5 / 5 / 4 m/min >> Table surface: 650 x 350 mm >> Table load capacity: 250 kg >> Vertical quill stroke: 60 mm >> Vertical and horizontal quill - SK40 taper >> Hydraulic drawbar system >> Weight approx. 1700 kg >> Floor space required: approx. 2.3 x 2 x 2 m >> Drive power: 12 KVA Accessories and Equipment: >> Heidenhain TNC 124 control system >> Hydraulic clamping vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts diagrams, operating manual for the control system and programming examples >> Handwheels >> Coolant system >> Tool holders, hydraulic vise, clamping tools About the Machine: Offered here is a Kunzmann WF4/3 tool milling machine equipped with a Heidenhain TNC 124 control system. This universal milling machine is in very good original condition. It comes from a facility where it was only used occasionally for training purposes. The control system is very easy to operate. Furthermore, the machine features hydraulic clamping both vertically and horizontally. Conversion from vertical to horizontal is very simple, thanks to the swiveling vertical head. All guides are regularly lubricated via the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. Take the opportunity to view and test the Kunzmann under power at our facility.

Year of construction: 2001, condition: ready for operation (used), X-axis: 400mm, Y-axis: 350mm, Z-axis: 400mm, table dimensions: 650mm/350mm, tool holder: SK 40, spindle speed: 1-4000/min, quill stroke: 60mm, max. feed: 2000mm/min, control: Heidenhain TNC 124, connected load: 5.5kW, dimensions: 2000mm/1000mm/2100mm, weight: 1.8t. The machine is not functional, errors occur repeatedly: Problems with the movement monitoring of the Z and Y axes, gross positioning error on the Z axis, faults when moving the control housing. The operational readiness controller is missing and appears continuously when switching on. A reference run is possible after several attempts. The spindle gear is worn out. On-site inspection is possible. Godpfjuqacwex Ag Nsuh

Condition: excellent (used), Year of construction: 2009, operating hours: 2,542 h, functionality: fully functional, Kunzmann WF 4/3 Milling Machine TNC 320 Manufacturer: Kunzmann Model: WF 4/3 Milling Machine Year of manufacture: 2009 Condition: Used, from training workshop, cleaned, powered on, ready for demonstration Spindle hours: 2,542 h X travel: 400 mm Y travel: 350 mm Guodjw D D Sfjpfx Ag Nsh Z travel: 400 mm Tool holder: SK 40 Spindle speeds: 1,000 – 4,500 rpm Feeds: 0 – 2,000 mm/min Quill stroke: 60.0 mm Table size: 650 x 350 mm T-slots: 14 H7 Control: TNC 320 Motor power: 5.5 kW Weight: 1,920 kg Space requirement: approx. 2,000 x 2,000 x 2,100 mm Total connected load: approx. 7 kVA Central lubrication Coolant system CE compliant Scope of delivery: – Technical documentation – Full safety enclosure – LED machine lamp

Condition: used, Year of construction: 2001, functionality: limited functionality, travel distance X-axis: 400 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 400 mm, feed rate X-axis: 2,000 m/min, feed rate Y-axis: 2,000 m/min, feed rate Z-axis: 2,000 m/min, quill stroke: 60 mm, rapid traverse X-axis: 5,000 m/min, rapid traverse Y-axis: 5,000 m/min, rapid traverse Z-axis: 4,000 m/min, total height: 2,000 mm, total width: 2,000 mm, total length: 2,000 mm, table width: 650 mm, table length: 350 mm, rotational speed (max.): 4,000 rpm, rotational speed (min.): 1 rpm, table load: 250 kg, overall weight: 2,000 kg, Equipment: documentation/manual, Machine condition: The machine is currently still in operation and is in working condition. Key features: Simple operation via TNC124 control Low-maintenance, robust machine design Guodpfx Ajw Icwmjg Neh Manual drilling possible (linear machining only) Limitations: Limited machine geometry (somewhat imprecise) Relatively high oil consumption Additional information: Complete machine documentation available. 5 kW motor, SK 40 spindle, Heidenhain TNC124 control, vertical spindle and horizontal spindle - SK40, central lubrication, handwheels, coolant system.

Condition: good (used), Year of construction: 1996, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 1 rpm, quill stroke: 60 mm, A Kunzmann milling machine of the type WF 4/3 is for sale The machine is fully functional and ready for immediate use Technical data Control: Heidenhain TNC 124 Year of manufacture: 1996 Working range longitudinal X - axis: 400 mm transverse Y - axis: 350 mm vertical Z - axis: 400 mm Angled table, rigid Clamping surface: 650 x 350 mm Max. load: 250 kg Main drive AC motor: 5.5 kW Feed drives AC - single drives Feed infinitely variable 0 - 2 000 mm/min Tool holder: SK 40 Godpfxjvftrxs Ag Nouh Speed range: 1-4000 1/min Quill, vertical: stroke 60 mm Swivel range vertical milling head: ± 90° Tool clamping: hydraulic Linear stroke measuring systems, direct, distance-coded Resolution 0.001 mm Position deviation Pmax according to VDI/DGQ 3441 0.015 mm 0.015 mm Operating voltage 400 Volt, 50 Hz Power consumption approx. 12 kVA Weight approx. 1,750 kg On request, transportation and loading can be arranged at extra cost. organized throughout Europe. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: like new (used), Machine like new from laboratory x-path 400 mm y-path 320 mm z-path 400 mm Control Heidenhain TNC124 table size 650 x 350 mm Tool holder SK 40 Spindle speeds 0-4,000 rpm Quill stroke 60 mm Vertical head swivels 90 degrees Total power requirement 5.0 kW Machine weight approx. 1.3 t Gedpfxju Nnaij Ag Nsuh Space requirement approx. 2.00 x 2.00 x 2.00 m

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Tool Milling Machine Kunzmann WF4/3 with Heidenhain TNC 124 Control Very Good Condition, CE-Compliant! Technical Data: >> Year of Manufacture: 2000 Machine No.: 343030 >> Fixed angle table >> Infinitely variable speed up to 4,000 rpm >> Infinitely variable feed in 3 axes from 0 to 2,000 mm/min >> Travel X/Y/Z: 400/320/400 mm >> Table size: 650 x 350 mm >> Table load: 250 kg >> Vertical quill stroke: 60 mm >> Vertical and horizontal quills – SK40 taper >> Hydraulic drawbar system >> Weight approx. 1,800 kg >> Space requirement approx.: 2.3 x 2 x 2 m >> Drive power: 13 KVA Equipment and Accessories: >> Heidenhain TNC 124 Control Gedpfewzu Skex Ag Nouh >> Hydraulic clamping vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts diagrams, operating manual for the control, and programming examples >> Handwheels >> Coolant system About the machine: For sale is a Kunzmann WF4/3 tool milling machine equipped with a Heidenhain TNC 124 control system. This universal milling machine is in very good condition. It comes from a facility where it was only occasionally used for training purposes. The control is very easy to operate. Additionally, the machine is equipped with hydraulic clamping both vertically and horizontally. Switching from vertical to horizontal operation is very simple thanks to the swiveling vertical head. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically tested by us. Take the opportunity to inspect and test the Kunzmann under power at our site.

Condition: good (used), Horizontal milling device – counterholder for KUNZMAN milling machines series WF. This was an accessory for a KUNZMANN WF 4/3 TNC 124 Guedovr Stuepfx Ag Noh There are 2 pieces available. The new price at Kunzmann is over € 2,000 + VAT. With a corresponding adapter plate it should also fit other machines e.g. EMCO, MIKRON; DECKEL; FPS etc. Price net ex warehouse

Condition: good (used), Year of construction: 2007, X-axis 400 mm Y-axis 350 mm Z-axis 400 mm spindle speed 4000 rpm table length 650 mm Gjdpjhuz T Dsfx Ag Nouh table width 350 mm table load 250 kg feed X-axis 5000 mm feed Y-axis 5000 mm Z-axis feed 4000 mm Line quill 60 mm Fast feed speed 0 - 2000 mm Length x width x height 1500 x 1800 x 1900 mm Weight 1500 kg

Condition: used, Year of construction: 1995, - Heidenhain position display - Infinitely variable feed in all axes - rapid traverse in all axes - Hydraulic tightening system - Rigid angular table - electric central lubrication - coolant system - workplace lighting - machine feet - year of construction 1995 Specifications Milling table: - Clamping surface: 650 x 350 mm - Clamping grooves: 5 - Slot width: 14 H7 - Groove spacing: 63 mm - Max. load: 250 kg Working range: - X-axis: 400 mm - Y-axis: 320 mm Gujdpfx Aovhfqrsg Nsh - Z-axis: 400 mm Max. Max. distances: - Top edge of table to horizontal spindle center: 140 - 540 mm - Max. table top edge to vertical head bottom edge: 430 mm Milling spindle: - Tool holder: SK40 - Vertical/horizontal speeds: 40 - 2550 rpm - Gear stages: 2 - Vertical quill stroke: 60 mm - Vertical head can be swiveled on both sides: 90 ° Feed rates: - Feed lengthwise & crosswise: 0 - 1000 mm/min - Rapid traverse lengthwise & crosswise: 4000 mm/min - Vertical feed: 0 - 1000 mm/min - Rapid traverse vertical: 3000 mm/min General data: - Drive power: 3 kW / 1410 rpm - Dimensions WxHxD: approx. 1600 x 1850 x 1350 mm - Weight: approx. 1300 kg

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Kunzmann WF4/3 tool milling machine with Heidenhain TNC 320 contouring control, very good CONDITION, CE compliant!! Gsdpjv Dut Isfx Ag Njuh Technical data: >> Year of manufacture 2008 Machine no. 348084 >> Rigid angle table >> Speed: infinitely variable up to 4500 rpm >> Feed infinitely variable in 3 axes from 0 to 2000 mm/min >> Rapid traverse X and Y axis 5000 mm/min Z axis 4000 mm/min >> Travels X/Y/Z: 400/350/400 mm >> Table surface: 650 x 350 mm >> Table load: 250 kg >> Vertical quill stroke: 60 mm >> Vertical quill and horizontal quill - SK40 >> Hydraulic tightening system >> Weight approx. 1800 kg >> Space requirement approx.: 2.3 x 2 x 2 m >> Drive power: 15 KVA Accessories and Equipment: >> Heidenhain TNC 320 contouring control >> Hydraulic tension vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts plans, operating instructions for the control and programming examples >> Handwheels >> Coolant system >> Electronic handwheel HR410 About the machine: A Kunzmann WF4/3 tool milling machine with a Heidenhain TNC 320 contouring control is offered. This universal milling machine is in very good condition. It comes from a company where it was only used a little for training. A very easy-to-use control. The machine also has hydraulic tension vertically and horizontally. Converting from vertical to horizontal is very easy by folding away the vertical head. The guides are regularly lubricated by the central lubrication. The Kunzmann was mechanically and electrically tested by us. Take the opportunity to view and try out the Kunzmann on site under power.

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, Tool milling machine Kunzmann WF4/3 Heidenhain digital display year of manufacture 1994 very good CONDITION!! Technical data: >> Year of manufacture 1994 >> Rigid angle table >> Speed from 40 to 2550 rpm Biojv7Igbpa >> Continuous feed in X Y Z axis from 0 to 2000 mm/min >> Travels X/Y/Z: 400/320/400 mm >> Rapid traverse in all axes >> Vertical quill stroke: 60 mm >> Vertical quill and horizontal quill - SK40 >> Hydraulic tightening system >> Weight approx. 1500 kg Gusdpfxovyr R Nj Ag Neh Accessories and equipment: >> 3-axis Heidenhain digital display >> Electric central lubrication >> Machine feet >> Handwheels >> Coolant system About the machine: Offered is a Kunzmann WF4/3 tool milling machine in very good condition. It comes from a state-owned company where it was only used a little. Converting from vertical to horizontal is very easy, by folding away the vertical head. The Kunzmann has been mechanically and electrically tested by us. Take the opportunity to view and try out the Kunzmann on site with power.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Tool milling machine Kunzmann WF4/3 with Heidenhain TNC 320 path control in very good CONDITION CE compliant!! Technical data: >> Year of manufacture 2006 Machine-No. 348013 >> Rigid angle table >> Speed: stepless up to 4500 rpm >> Feed stepless in 3 axes from 0 to 2000 mm/min >> Rapid traverse X and Y axis 5000 mm/min Z axis 4000 mm/min >> Travel X/Y/Z: 400/350/400 mm >> Table surface: 650 x 350 mm >> Table load: 250 kg >> Vertical quill stroke: 60 mm >> Vertical quill and horizontal quill - SK40 >> Hydraulic clamping system >> Weight approx. 1800 kg >> Space requirement approx.: 2.3 x 2 x 2 m >> Drive power: 15 KVA Gusdpfx Ajwrhxfeg Nsh Accessories and equipment: >> Heidenhain TNC 320 path control >> Hydraulic clamping vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare part diagrams, operating instructions for the control and programming examples >> Handwheels >> Coolant system >> Electronic handwheel HR410 About the machine: A Kunzmann WF4/3 tool milling machine with a Heidenhain TNC 320 path control is being offered. This universal milling machine is in very good condition. It comes from a company where it was only used a little for training. A very easy-to-use control. Furthermore, the machine has hydraulic clamping both vertically and horizontally. Conversion from vertical to horizontal is very simple, thanks to the fold-away vertical head. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically tested by us. Take the opportunity to view and test the Kunzmann live on site under power.

Condition: used, Year of construction: 1996, x-travel 400 mm y-travel 350 mm z-travel 400 mm tool taper SK 40 spindle turning speed range 1,0 - 4.000 U/min feeds 0 - 2000 mm/min quill stroke 60,0 mm table-size 650 x 350 mm T-slots 14 H7 Control TNC 124 engine output 5,5 kW weight 1800 kg dimensions of the machine ca. 2000 x 1000 x 2100 mm New price ~ 55.000 euros (!!) Furnishing : - Universal tool milling machine - HEIDENHAIN pattern control TNC 124 - The control panel can be swiveled to the right of the machine - hydraulic tool changer (DIN 69872) - Vertical milling head - SK 40 - X-axis feed .. 0 - 2000 mm / min - Y-axis feed .. 0 - 2000 mm / min - Feed Z-axis .. 0 - 2000 mm / min Gujdpow U U Sijfx Ag Njh - Central lubrication, electrical - coolant device - Chip tray - Operating instructions for machine + control Special accessories included: - hydraulic machine vice - many tool holders - HEIDENHAIN HR 410 electronic handwheel

Condition: reconditioned (used), Year of construction: 2002, Universal tool milling machine Make: KUNZMANN Model: WF 4/3 Year of manufacture: 2002 - partially overhauled, newly painted, RAL7035 light gray / RAL3027 raspberry red RAL7016 anthracite gray Mach. no.: 344025 with guarantee Gedpfom Nbwtsx Ag Neuh geometric acceptance with test report Accessories: - HEIDENHAIN TNC 124 path control - HEIDENHAIN HR 410 electronic handwheel - HEIDENHAIN KT 130 electronic 3D touch probe system for recording the workpiece position for determining workpiece reference points for measuring a finished part incl. Weldon chuck SK40/Ø 16 mm - universal table 650 x 395 mm (T-slot: 14 mm) can be swiveled around 3 axes can be rotated 360° (as 4th axis digital displayed in the control) pivotable +/- 30° tilting range towards the machine 45° tilting range away from the machine 15° centering hole Ø 32 mm table load 150 kg - vertical milling head SK 40 with hydraulic tightening system DIN 69872 - central lubrication, electric - coolant system - splash guard cabin, travelling, electrically secured - operating instructions used as seen The machine is technically corresponding to the state of the year it was built.

Condition: like new (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 4,000 rpm, quill stroke: 60 mm, table width: 650 mm, table length: 350 mm, overall weight: 1,800 kg, Equipment: documentation/manual, Dear Sir or Madam, For sale is a CNC milling machine of the type Kunzmann WF4/3 from year of manufacture 2004. The machine can be operated manually and under control. The Heidenhain TNC124 control is excellent for learning the basics of CNC programming and is still very popular in production as well as for machining special parts. The very quickly folding vertical milling head makes the Kunzmann a real all-rounder with nevertheless low space requirements. You will receive this machine from us workshop tested, partially overhauled or completely overhauled, available with or without cabin. Guedpfx Aju H U Hkjg Noh Availability: on request Year: 2004 Control: Heidenhain TNC124 Table: fixed angle table 650x350mm Travel: X400mm/Y350mm/Z400mm Quill stroke: 60mm Connected load: approx. 7kW Speed range: 1-4000 rpm Feed: 0-2000 mm/min Tool holder: SK40 Equipment and accessories: coolant system, central lubrication, manual, documentation, machine feet, electronic handwheel, etc. Our service promise to you: - We are a certified master workshop in the field of mechanical engineering - All machines are thoroughly checked - All lubricants and, if necessary, worn parts are replaced in advance - On request we can completely or partially overhaul the selected machine for you - On request you can order additional accessories such as tools, etc., directly - On request we can also install other accessories such as safety devices - We are also happy to take care of shipping and/or installation

Condition: reconditioned (used), Year of construction: 2008, Universal tool milling machine Make: KUNZMANN Model: WF 4/3 Guodehikrrepfx Ag Neh Year of manufacture: 2008 - partially overhauled, newly painted, RAL7035 light grey / RAL3027 raspberry red Mach. no.: 344349 Guarantee: 6 months geometric acceptance with test report Accessories: - HEIDENHAIN TNC 124 path control - HEIDENHAIN HR 410 electronic handwheel - Fixed table 650 x 350 (T-slot: 14 mm) - Vertical milling head SK 40 with hydraulic tightening system DIN 69872 - Central lubrication, electric - Coolant system - Chip tray - Operating instructions - Used as seen -

Condition: reconditioned (used), Year of construction: 1999, Universal tool milling machine Make: KUNZMANN Model: WF 4/3 Year of manufacture: 1999 - partially overhauled, newly painted, RAL7035 light gray / RAL3027 raspberry red RAL7016 anthracite gray Mach. no.: 343006 with guarantee geometric acceptance with test report Accessories: Gjdpfx Agoub R R Ss Neuh - HEIDENHAIN TNC 124 path control - HEIDENHAIN HR 330 electronic handwheel - Fixed table 640 x 350 (T-slot: 14 mm) - Vertical milling head SK 40 with hydraulic tightening system ISO 7388 - Central lubrication, electric - Coolant system - Splash guard cabin, electrically secured - Control panel on the base - Operating instructions Used as seen The machine is technically corresponding to the state of the year of manufacture.

Condition: good (used), Year of construction: 2001, feed length X-axis: 600 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, CNC milling machine KUNZMANN - WF7/3 X-Axis: 600mm Guedjwq Ndgopfx Ag Neh Y-Axis: 400mm Z-Axis: 400mm Table Length:650mm Table Width: 400mm Table load: 250 Stroke pinole:40mm Length: 2800mm Width: 2400mm Height: 2100mm Weight: 2000kg

Condition: good (used), Year of construction: 2001, Heidenhain TNC 310 cnc control electronical hand wheel coolant device Gedsit Tr Topfx Ag Nouh Technische Daten: Längsweg (X-Achse) / X-travel longitudinal 600 mm Querweg (Y-Achse) / Y-travel cross 400 mm Senkrechtweg (Z-Achse) / Z-travel vertical 400 mm Werkzeugaufnahme / spindle taper SK 40 Drehzahlbereich / spindle speed range 60-5000 UpM Vorschub / feed 0-2000 mm/min. Eilgang längs + quer / rapid feed x/y 5 m/min. Eilgang senkrecht / rapid feed z 4 m/min. Antriebsleistung gesamt / drice capacity 7 kW Gewicht ca. / weight ca. 2000 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: excellent (used), Year of construction: 1997, Universal milling and drilling machine Manufactured by KUNZMANN. WF 7/3 Year of manufacture: 1997 Technical specifications Make: Kunzmann Type: WF 7/3 Godpfx Aswhm Sijg Njuh Year of manufacture: 1997 X-axis: 600 mm Y-axis: 400 mm Z-axis: 400 mm Clamping surface: 800 x 425 mm Clamping slots: 6 Slot spacing: 63 mm Max. load: 250 kg Tool holder: SK 40 Quill stroke: 60 mm (vertical) Head can be swiveled 90° to both sides Drive power: 4 kW Dimensions: approx. L 2.0 x W 2.0 x H 2.0 m Weight: approx. 2.0 t (including control cabinet and swivel panel) Equipment - Heidenhain TNC 124 control - Operating instructions - Enclosure - Coolant system - Hydraulic tool clamping All information is subject to change without notice. A demonstration is available at any time in our showroom.

Condition: excellent (used), Year of construction: 1999, x-travel 400 mm y-travel 320 mm z-travel 400 mm Control HEIDENHAIN TNC 410 Gusdpfx Agsunt Ihj Neh spindle turning speed - stepless 0 - 4000 U/min quill stroke 60 mm tool taper SK 40 table surface area 650 x 350 mm total power requirement 6,5 kW weight of the machine ca. 1,8 t dimensions of the machine ca. 2,5 x 1,8 x 2,0 m Electric handwheel HR 410 Probe MP 11, automatic tool measurement TT 120 Cabin, tool holders,...