Used Section Bending Machine for sale (66,028)

Condition: used, Year of construction: 2001, functionality: fully functional, Profile Bending Machine SAF Curvatrici (TUWI) DS 60 HV – Top Condition & Huge Tool Package Description: For sale is a high-quality profile bending machine, type SAF Curvatrici (TUWI) DS 60 HV, from the first owner. The machine was purchased new by us in 2001 and has been in our possession ever since. It is fully operational and can be demonstrated under power after prior consultation. Special highlight – Modernized control system (08/2019): The control system was completely overhauled and modernized by a specialist company in August 2019. Now, 10 different feed sequences can be programmed. After a programmed value is reached, the next value is automatically approached by pressing the button again (value input in ascending order). Technical data & equipment: • Shaft diameter: 50 mm (for all three axes) • Acceptance height: 115 mm • Additional equipment from factory: 2 RCD correction rollers for bending angle iron (R/L). The original, lateral and height-adjustable shafts (38 x 250 mm) are also included. • Special modification for transport: Specially manufactured base frame for transport including four height-adjustable support plates. • Additional device for angle iron: A 10 mm thick plate was mounted on the top side. An additional hydraulic cylinder can be attached here, which pushes the vertical flange extremely close to 90° during bending (adjustable pressure depending on the angle). Note: The cylinder is not included in the standard price, but can be requested separately. Enormous scope of supply (Extremely many tools included!): The biggest advantage of this offer is the extremely extensive tool package, which is completely included in the price: • Standard tools: Complete set according to the machine’s scope of supply • 18 different roller sets: According to the list from Ø 8 mm to Ø 33.7 mm • Special tools for angle iron (according to the list) • Special tools for flat steel (light & heavy axis) • Special tools for square and rectangular tubes • Special tools for diagonal square material • Documentation: Original operating manual is fully available Note: The machine will only be sold as a complete package together with the complete tool set according to the attached list. Sales and delivery conditions: • Pricing: Ex works (net, plus VAT). • Logistics: The disassembly, loading and collection must be organized and carried out by the buyer himself or by a forwarding agent commissioned by him. Technical specifications according to available documents. Subject to prior sale. Dsdpfxez Ix Uks Apmocp

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, actuation type: hydraulic, The Baileigh Industrial R-H85 is a heavy-duty, industrial-grade hydraulic double-pinch roll bender designed for precision metal fabrication. It is engineered to minimize material waste and deliver highly accurate, repeatable bends for high-capacity applications. Core Specifications & Capabilities Bending Capacity: Capable of handling up to 3″ Schedule 40 pipe and 3-3/8″ x 3-3/8″ x 1/4″ angle iron. Double-Pinch Design: Features a fixed top roll and two lower rolls driven by independent hydraulic cylinders. This setup allows for pre-bending and post-bending, minimizing the unbent straight sections at the edges of the material to reduce scrap metal waste. Driven Rolls: Equipped with an industrial-grade hydraulic transmission that powers all 3 rolls at a speed of 5.2 rpm. Dcedpfx Aszn Rdmopmsp Versatile Operation: The machine can be adjusted to operate in either a vertical position for smaller diameters or a horizontal position when rolling larger radii. Key Features Precision Control: Includes a portable operator pedestal housing an integrated digital readout (DRO). Encoders communicate with the DRO for exact positioning of the lower rolls, and programmable stops ensure easy repeatability across large production runs. Anti-Twist Lateral Guides: Features hydraulically powered lateral angle guide rolls that keep structural shapes properly aligned and prevent twisting during the bending process. Segmented Tooling: Comes standard with hardened tool steel, segmented drive rolls that can be reconfigured to match various material sizes and shapes. Heavy-Duty Build: Constructed from heavy steel plate that is both bolted and welded to eliminate framework flex even when operating at maximum capacity.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, wire diameter (max.): 8 mm, WAFIOS BMU 40 CNC 3D Wire Bending Machine | 2015 | Decoiler | Tooling | Complete Production Cell Complete CNC Wire Bending and Forming Cell WAFIOS BMU 40 CNC wire bending machine | Wire decoiler / pay-off system | Tooling sets | Conveyor and collection system | Safety enclosure | CNC control For sale: a complete used WAFIOS BMU 40 CNC wire bending and forming machine with peripheral equipment and extensive tooling. The machine is designed for automatic production of formed wire components and is offered as a complete production cell. The machine is currently installed together with the wire feeding system, decoiler, finished-part handling equipment, safety guarding and dedicated tooling. The system consists of: • WAFIOS BMU 40 CNC 3D wire bending machine • CNC control unit with operator panel • Handheld operator control • Wire feeding and straightening section • Wire decoiler / pay-off unit • Automatic wire forming and bending section • Finished-part conveyor / collection system • Tooling and forming accessories • Tool cabinet with dedicated tooling • Additional machine tools and accessories • Safety fencing with access gates • Electrical and control equipment Technical Specifications • Manufacturer: WAFIOS AG, Germany • Model: BMU 40 • Machine type: CNC wire bending / forming machine • Number of CNC axes: 3 • Wire diameter range: 3 - 8 mm • Year of manufacture: 2015 • Machine No.: 2 7656 018 • Plan No.: 7656 2 9000 18 Djdpoz R Rpbofx Apmecp • Power supply: 3-phase, 400 V • Frequency: 50 Hz • Rated current: 13 A • Control voltage: 24 V DC / 230 V AC • CE marked Equipment Included • Wire decoiler / pay-off system • Wire feeding and straightening equipment • CNC operator station with screens and keyboard • Handheld control unit • Dedicated forming tools, dies, guides and accessories as shown in the photos • Tool storage cabinet • Finished-part conveyor / collection table • Product collection racks • Safety guarding around the complete production cell • Additional maintenance and setup tools as shown in the photos Technical Condition Used industrial machine from a production environment. The machine is installed as a complete production cell with peripheral equipment and tooling. The equipment is offered together with the accessories and tooling shown in the photos. Additional Information • Complete production cell available • Extensive tooling and accessories included as shown in the photos • Wire decoiler included • Finished-part handling / collection system included • Safety fencing included • Inspection available by appointment • Sale due to plant closure • All de-installation, loading and removal costs are the buyer’s responsibility Location Koszalin, Poland

Condition: good (used), functionality: fully functional, Year of construction: 1990, machine/vehicle number: 325100, number of rollers: 3, shaft diameter: 100 mm, pipe diameter (max.): 120 mm, overall weight: 3,000 kg, Equipment: documentation/manual, emergency stop, I am offering for sale a profile bending machine, purchased new in 1990, manufactured by COMAC, type 3025 HV, with standard configuration including vertically arranged bending axes. It is in fully operational condition and can be demonstrated under power after prior arrangement. - Control panel on the swivel arm with joysticks and switches - Digital displays for the two side rollers Maintenance & Condition: The machine is in excellent condition. In 2023 and 2025, it underwent extensive repair and overhaul work at a specialized workshop. The total investment volume for both measures amounted to approximately €50,000 net. Documentation & Evidence: The entire maintenance history is completely documented. Detailed evidence of the individual items, as well as all original invoices, is available and can be provided upon request. Original manual available. Enormous added value: Extensive tool and profile package included! To be able to serve customer orders in an even more flexible and individualized manner, significant investments were made in expanding the tool range. In addition to the standard tools, you will receive: a seven-page detailed list of all tools, including photos. • Tools for various round tubes Ø (57 + 60.3 + 70 + 76.1 steel + 76.1 plastic, + 80 + 88.9 + 101.6 + 108 + 114.3 + 120) mm. • Special tool for flat profiles, light axis up to a height of 500 mm. • Tools for square and rectangular tubes. • Tools for angle iron • Tools for special profiles Sales and delivery conditions: • Pricing: Ex works (net, plus VAT). • Logistics: The disassembly, loading and collection must be organized and carried out by the buyer himself or by a forwarding agent commissioned by him. Dsdpfxo Af Utae Apmecp Technical specifications according to available documentation. Subject to prior sale. If you have any questions or require further information, please send us a message or call us.

Condition: good (used), functionality: fully functional, Year of construction: 2009, pipe diameter (max.): 60 mm, pipe length (max.): 6,000 mm, bending radius (max.): 200 mm, bending radius (min.): 35 mm, overall weight: 4,400 kg, input current: 63 A, input frequency: 50 Hz, Equipment: CE marking, documentation/manual, emergency stop, We are offering this used Dynobend DB60 tube bending machine, manufactured in 2009. Manufacturer: Dynobend Type: DB60 Machine number: 2009-11-B789 Year of manufacture: 2009 Weight: 4,400 kg Voltage: 230/400 V Frequency: 50 Hz Connected load: 40 kVA Maximum current: 63 A Great opportunity from a single owner: High-quality mandrel bending machine Dynobend DB-60 including a €70,000 tool package. For sale is a powerful and precise mandrel bending machine, type Dynobend DB-60, manufactured in 2009. The machine was purchased new directly from the manufacturer and has been in our possession ever since. It has been regularly maintained. It bends predefined designs fully automatically and reliably. The absolute highlight: Huge tool package included! The machine comes with an extremely comprehensive package of 18 different tool sets for round tubes ranging from Ø 17.2 mm to Ø 60.3 mm. The new price for these tools alone was approximately €70,000. This means you will be ready for an extremely wide range of tube processing applications immediately. Technical highlights & scope of performance: • Maximum tube length: up to 6,000 mm can be processed. • Intelligent control: The calculation of all required bending parameters is carried out according to the X-Y-Z coordinate system with convenient input via the touchscreen. • Bending radius: The largest possible neutral bending radius is at least 200 mm. • Condition & maintenance: Good, used condition. The machine has been regularly maintained directly by Dynobend; any necessary wear parts have been replaced promptly when needed. • Usage note: The fully automatic bending process depends on the minimum straight intermediate length between two bends as well as the overall design (with regard to potential collisions with the machine/floor in complex shapes). Important technical note: The laser scanner of the safety system has already been replaced, but it is currently not functioning correctly. The customer may need to take remedial action or make improvements. Complete documentation available: The machine will be delivered with all important and legally relevant documents: • EC declaration of conformity (Directive 98/37/EEC, Annex II A) Dedpfs Ahiuajx Apmecp • Original acceptance test report • Complete original operating manuals (pneumatics, hydraulics, electrical system, Sick laser scanner, program manager, and user manual) • All descriptions and maintenance invoices are available and can be disclosed. Inspection & demonstration welcome: Come and see for yourself! The bending machine is currently powered up and fully functional. After prior arrangement, we will be happy to demonstrate the machine in operation. Sales and delivery conditions: • Price: On request / negotiable. • Delivery condition: Ex works (EXW). • Logistics: The dismantling, the proper loading, and the removal must be organized by the buyer or carried out by a commissioned shipping company. Subject to prior sale. Take advantage of this opportunity for an immediately ready-to-use professional machine with enormous accessory value. We look forward to hearing from you and arranging an appointment for an inspection!

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, overall weight: 6,300 kg, roller diameter: 250 mm, working length: 3,100 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Bending length: approx. 3,100 mm Dsdpfx Aj Ahg T Hjpmjcp Roller diameter: approx. 250 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 5,000 x 2,000 x 1,800 mm Total weight: 6,300 kg

Condition: used, functionality: fully functional, Year of construction: 2018, CNC PIPE BENDING MACHINE, year 2018 Made in China Excellent condition, rarely used Liye DW 63 CNC x 2 AS CNC pipe bending machine – a hydraulic, fully automatic machine designed for precise bending of metal pipes. It provides high repeatability and is used in various industries, such as furniture manufacturing, automotive, and construction. Key technical parameters: • Model: DW 63 CNC x 2 AS • Manufacturer: Zhangjiagang Liye Machinery Co., Ltd • Power supply: 380V, 50Hz • Bending capacity (maximum diameter x wall thickness): Ø63 x 2 mm • Automation: Full (CNC) Djdpj Ahx Rvsfx Apmscp • Control: Bending axis driven by a hydraulic cylinder, feed (X) and rotation (Z) axes driven by servomotors, ensuring high precision. • Materials: Capable of bending steel, stainless steel, aluminum, brass, and copper. • Additional features: Interactive touch screen, programmable springback compensation, automatic mandrel lubrication (optional) • Condition: Used, functional

Condition: new, Year of construction: 2026, sheet thickness (max.): 8 mm, sheet thickness steel (max.): 8 mm, sheet thickness aluminum (max.): 1 mm, overall weight: 400 kg, total length: 3,440 mm, warranty duration: 12 months, Equipment: CE marking, documentation/manual, The highest precision of this press brake guarantees and enables the bending of sheet steel up to 0.8mm and for all non-ferrous metals 30% more bending capacity. The Prod-Masz press brakes are characterized by high quality, robustness, optimal functionality and beautiful design! Only high-quality materials are used in the production of the folding bench. Folding machine 3.14m/0.8mm Technical specifications: - maximum working width: 3140 mm - Bending performance: up to 0.8 mm (steel sheet) - Bending angle: max 145 degrees - Bending beam thickness: 24 mm - the cut with the roller shears over the entire working width - lifting of the upper beam in three positions - Passage opening: 80 mm Dodpfx Aob Hqa Njpmocp - degree scale - angle stop - Front and depth stops - Weight: about 400 kg - The cutter (max. cutting capacity up to 0.8 mm / sheet steel) plus 350 euros - The machine complies with CE guidelines and has a 12-month guarantee. Price: €2050.00 The delivery costs are: PLEASE ASK Cash on delivery and bank transfer in advance Delivery within 1 week from order date We are looking forward to your contact! Invoices are issued with 0% as intra-community delivery or with plus 23% of VAT.

Condition: used, Roundo PS340 3000 mm Hydraulic Double-Pinch Plate Bending Rolls Manufacturer: Roundo AB Model: PS340 Year: 1983 Country of manufacture: Sweden Type: Hydraulic three-roll double-pinch plate bending rolls Capacity Maximum working length: 3,000 mm Pre-bending capacity: approximately 12 mm mild steel aximum rolling capacity: approximately 18–23 mm mild steel, depending upon finished diameter Standard upper-roll diameter: 340 mm Plate capacities based upon mild steel of approximately 270 N/mm² yield strength Minimum rolling diameter: approximately 1.1–1.4 times the upper-roll diameter, depending upon material thickness Remaining straight edge after pre-bending: approximately 1.5–2 times plate thickness Features Hydraulic double-pinch design Both lower rolls independently hydraulically adjustable Pre-bending of both ends without removing and reversing the plate Hydraulic rotation of all three rolls Infinitely variable rolling speed Hydraulic powered drop end Portable pendant control Djdpfozuzpysx Apmecp Front safety trip bar Heavy-duty fabricated and stress-relieved frame Forged and crowned steel rolls Rolls mounted in heavy-duty roller bearings Suitable for cylindrical and conical bending Approximate machine weight: 14,000–15,000 kg, subject to confirmation Approximate main motor: 22 kW, subject to data-plate confirmation

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, control type: CNC control, shaft diameter: 50 mm, bending force (max.): 10 t, travel distance X-axis: 200 mm, shaft length: 200 mm, TECHNICAL DETAILS Maximum torque per roll: max. 2,500 Nm Bending force: 10 t X-axis travel: 200 mm Shaft diameter: 50 mm Shaft length: 200 mm MACHINE DETAILS Control: CNC Dimensions & Weight Dedpoxw Sl Rsfx Apmecp Dimensions (L x W x H): 1,730 mm x 1,600 mm x 1,520 mm Weight: 1,800 kg Transport packages: 2

Condition: new, Year of construction: 2026, sheet thickness (max.): 1 mm, sheet thickness steel (max.): 1 mm, overall weight: 540 kg, total length: 3,440 mm, warranty duration: 12 months, Equipment: CE marking, angle stop, documentation/manual, Sheet metal folder ZGR-3140/1.0 We have a new, high-quality folding machine of 3140 mm/ 1.0mm. This machine guarantees very high quality and agility of the work doing by the roofers. Our main task is the production of folding machines, with which we are concerned many years. The bending machine is equipped in degree scale, Romans screws, rear frame and gas struts. Directly from manufacturer! Dodpsci R Exjfx Apmocp - max. working length 3140 mm - steel plate to 1.0 mm - our machines bend both a copper sheet and aluminum sheet - the total weight of machine is 600 kg - the clearance between the lower beam (fixed) and the upper beam (pressed) of 80 mm - bending angle of 145 degrees - thickness of the bending beam of 20mm - new, full machine - delivery to the client - certificate CE - TAPPING ANGLE IS FREE !! Price excl. shipping We provide invoices with 0% of tax. Delivery every week :)

Year of construction: 2020, condition: good (used), functionality: fully functional, machine/vehicle number: 2020-09-B970, High-quality compact bending machine Dynobend TM 02 – in top condition, including a large tool kit, for sale. Condition & Inspection • The machine was purchased new directly from the manufacturer Dynobend in 2021 and has been in our possession ever since. • It is used but in good condition (see photos for details). • Inspection is welcome: The bending machine is currently powered on and fully functional. After prior appointment, it can be inspected and demonstrated in operation. Application & Scope of Performance • Focus on solid material: The machine was used almost exclusively for bending solid material. It can also be used for bending pipes (with limited application areas). • Control & Programming: Up to 25 individual bending cycles can be programmed – extremely practical and absolutely sufficient for most applications. • Length stop: o The programmable length stop covers 0 to 1500 mm as standard. o By bending on both sides, workpieces up to 3000 mm can be processed. o Without a direct stop, lengths over 3000 mm are also possible without any problems. Extensive tool kit including additional equipment: • Numerous additional tools were manufactured for the standard tool kit to significantly expand the machine's range of applications (see photos). • The machine will only be sold together with the complete tool kit. Complete documentation available • The sale includes all important and legally relevant documents: • Original EC declaration of conformity (Directive 2006/42/EC, Annex II A) • Acceptance test report • Original operating manual available • Invoices available Dcedpfxoz Ny Rke Apmop • The price is ex works (EXW). • Dismantling, professional loading, and transport must be organized by the buyer or carried out by a commissioned freight forwarder. • Technical specifications according to the nameplate and available documents. Subject to prior sale.

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 25510, total width: 790 mm, total length: 850 mm, total height: 830 mm, empty load weight: 295 kg, Export is possible. Dcjdpfxeyw N H Uj Apmep

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2025, operating hours: 30 h, control type: CNC control, degree of automation: automatic, actuation type: electric, overall weight: 10,000 kg, input voltage: 380 V, input frequency: 50 Hz, warranty duration: 12 months, feed length X-axis: 120 mm, feed length Y-axis: 200 mm, feed length Z-axis: 170 mm, Equipment: angle stop, documentation/manual, emergency stop, GB-A1500 Fully automatic high-speed bending center Bending length (mm): 1500 Bending height (mm): 4side160 4side170/2side350 4side350 Minimum molding size: (Fold 4 sides) (mm) 4 sides 160: 350*250 4 sides 170/2 sides 350: 350*250 4 sides 350: 350*250 Maximum bending size (mm) 1500*1500 X-axis travel: 120 Y axis travel: 4 sides 160: 200 4 sides 170/2 sides 350 305 4 sides 350: 305 Z-axis travel: 4 sides 160: 170 4 sides 170/2 sides 350: 357 4 sides 350: 357 Pressing knife height: 4 sides 160: 177 4 sides 170/2 sides 350: 177 4 sides 350: 357 Number of axes: suction cup: 11 Pressure arm: 14 Machine power (KW) suction cup: 34.7 Pressure arm: 36.35 Maximum bending thickness of aluminum plate (mm): 3 Maximum bending thickness of iron plate (mm): 2 Maximum bending thickness of stainless steel (mm): 1.5 Maximum bending speed (s/knife) : 0.2 Overall dimensions (mm) long (front) 4 sides 160: 1890 2-4 sides 350 suction cups: 1890 2-4 sides 350 pressure arm: 1890 Width (side) 4 sides 160： 3300 2-4 sides 350 suction cups：3536 2-4 sides 350 pressure arm: 4127 4 sides 160: 2666 2-4 sides 350 suction cups: 2946 2-4 sides 350 pressure arm: 2946 Weight (approx. kg) 4 sides: 160 2-4 sides 350 suction cups: 10000 Dodpfx Apov Ikvgjmjcp 2-4 sides 350 pressure arm: 10000 1) Machine frame is heaviest welded con struction,stess released by annealing process,this has minimized deflection of the frame. 2) Y Axis full closed loop control 3) Proportional hydraulic compensation system to prevent deformation 4) German HEIDENHAIN linear encoder 5) Taiwan HIWIN ball screw and linear guide rail ,high performance AC Japanese Yaskawa AC servo motors and drives 6) Rich functions CYBELEC/DELEM professional control system 7) Electro-hydraulic servo synchronization module and Greman BOSCH pressure module 8) +/-0.01mm repeat accuracies 9) +/-0.01mm parallelism accuracies

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, roller diameter: 60 mm, working width: 1,050 mm, sheet thickness (max.): 1 mm, roll metal bending machine Isitan 1050 X 1.2mm Manual 3 roll Bending Machine, excellent condition for sale manufacturer: Isitan 1050X1.2 max sheet width: 1050mm max sheet thickness: 1.2 mm Wire grooves at the ends of the rollers Conical bender roller diameter: 60mm Dcedpfjwk Rlxjx Apmep Upper roller removable for easy workpiece removal machine dimensions: length: 130cm height: 100cm width: 65cm weight: 240kg

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, Concrete rebar bending machine / Bending machine B 50 – Exhibition model COMPLETE TECHNICAL SPECIFICATIONS – SEE PHOTO - CE marking - Incl. bending pins / stop / bending sleeves - Safety guard / end switch activated - Bending capacity max. 50mm / diameter (single bar) - Foot switch - Complete documentation - Bending via program or individual bends Dimensions: L x W x H 1.3 x 0.9 x 1 meter / Weight 600 kg Djdpfozvy S Nex Apmocp Errors and omissions excepted.

Condition: new, functionality: fully functional, Year of construction: 2026, tube bender R 1 ZOPF - without bending tooling - with foot pedal and emergency stop - without tooling - control unit - 100 programs of 9 bends each - precise electronic control of C-shaft - manual and automatic bending mode - bending angle and springback angle are programmable by means of a microprocessor - rapid engagement and disengagement of the tooling - scale for counterbending holder - movable Dedpfofiqntjx Apmjcp - dimensions 930x410x1000 mm - weight 280 kg - motor 1,5 Kw - 220 volt single phase - bending radius R55 - R340 mm - bending capacity of tube Ø 5 mm to 50 mm - max. Bending angle of 210 °

Condition: used, Year of construction: 2008, pipe diameter (max.): 20 mm, pipe length (max.): 3,000 mm, bending radius (max.): 45 mm, overall weight: 180 kg, total length: 3,300 mm, total height: 1,150 mm, operating pressure: 125 bar, Equipment: documentation/manual, emergency stop, foot remote control, quick-change device, We are offering this used TRACTO-TECHNIK TB20D mandrel bending machine for sale. Serial number: TB20D 2110608 Year of manufacture: 2008 For sale is a mandrel bending machine, type: Tracto-Technik Tubobend TB20D, 3000 mm, from its first owner. The machine was purchased new by us in 2008 and has been in our possession ever since. It is fully operational and can be demonstrated under power upon prior arrangement. The TUBOBEND 20 mandrel bender is a pipe bending machine with a free bending head for processing pipes in all planes. It is designed for work involving adjustments according to drawings or samples, as well as for series production. With the TUBOBEND 20 mandrel bender, precision steel pipes according to DIN 2391/C, material St 35.4 NBK (hydraulic pipes), 6-16 mm diameter can be processed. The processing of other pipe qualities and dimensions is also possible. The mandrel system allows for the smallest technically feasible radii to be achieved. If required, a folding smoother can also be used. The bending unit is designed in such a way that even serpentine (meander) bends can be made. Dimensions: L x W x H in mm 920 x 720 x 1800 (without stop device) Machine lower part 630 x 550 x 700 Machine upper part 920 x 720 x 500 Weights: Total weight approx. 180 kg (without stop device) Machine lower part with hydraulic unit approx. 74 kg Safety device: Dedpfo Abbmpox Apmecp - Emergency stop button: A central emergency stop button for the TUBOBEND 20 is located on the control panel. Safety cover with electrical shut-off in the hazard area of the bending arm. Description and overview: The TUBOBEND 20 mandrel bender is a small, mobile, compact pipe bending machine that can be easily disassembled into two main components for transport purposes. The bending head can be swivelled from the vertical to the horizontal position. The pipe feed length is 1500 or 3000 mm. Extensive scope of supply (a very large number of tools included!): An advantage of this offer is the extensive tool package, which is completely included in the price: see separate list. Documentation: Original operating manual is complete. EC Declaration of Conformity available. Note: The machine will only be sold as a complete package together with the complete set of tools according to the attached list. Sales and delivery conditions: • Pricing: Ex works (net, plus VAT). • Logistics: Dismantling, loading and collection must be organized and carried out by the buyer himself or by a shipping company commissioned by him. Technical data according to available documents. Subject to prior sale.

Condition: new, Year of construction: 2026, control type: manual, sheet thickness steel (max.): 8 mm, sheet thickness aluminum (max.): 1 mm, overall weight: 1,000 kg, total length: 4,200 mm, total width: 900 mm, total height: 1,100 mm, warranty duration: 12 months, Equipment: CE marking, documentation/manual, Highly precise press brake for steel, copper, zinc, and aluminum sheets. These press brakes and all common spare parts are available ex stock. Maximum working length of the press brake: 4200 mm Bending capacity: up to 0.8 mm (steel sheet) Titanium-zinc sheet: 0.8 mm, aluminum sheet: 1.0 mm, copper sheet: 1.0 mm Bending angle of the bending machine: max. 160 degrees Cutting with the roller shear across the entire working width Bending ram thickness: 20 mm Cutting with the roller shear across the entire working width Raising of the upper beam in three positions Upper ram stroke: 80 mm Degree scale Weight of the press brake: approx. 810 kg Cutout 60 mm / 45° Roller shear 0.8 mm, additional cost: 350 Euro Dodpfxsb Hxzyo Apmjcp Manual folding machine, additional cost: 75 Euro Delivery costs: 500 Euro to Germany and Austria Delivery date: every week, Monday/Tuesday Payment upon delivery or prepayment Invoice will be issued with 0% VAT. Your VAT identification number is required for this.

Condition: new, Year of construction: 2026, working width: 4,200 mm, sheet thickness (max.): 1 mm, sheet thickness steel (max.): 8 mm, sheet thickness aluminum (max.): 1 mm, sheet thickness copper (max.): 1 mm, back gauge: 1,320 mm, overall weight: 1,000 kg, total length: 4,500 mm, total width: 900 mm, total height: 1,100 mm, warranty duration: 12 months, Equipment: CE marking, angle stop, documentation/manual, foot remote control, Electric press brake RED-4200/0.8/150* with foot pedal and backstop. New electric precision sheet metal bending machine for 0.8 mm steel and 1 mm aluminum sheets. The main features of this sheet metal processing machine are its efficiency and precision. The bending machine enables bending operations with a maximum angle of 150 degrees. Electric control: A user-friendly control panel increases ease of use and the precision of repeatable bends. Roller shear: Enables cutting across the entire working width. Robust construction: The 18 mm thick bending beam ensures durability, while the 80 mm opening and the three-stage stroke adjustment of the upper beam facilitate material positioning. Machine equipment: electric control: upper and lower beam Foot pedal for control Electric backstop up to 1320 mm Control panel Additional equipment: Roller shear up to 1 mm steel sheet / 1.5 mm aluminum - 500 euros Manual folding machine - 100 euros Magnetic alignment aid, 2 pcs, 36 cm - 100 euros Dcsdpfxjc I T Rxs Apmep Shipping throughout Germany: 500 euros Invoice will be issued without VAT as an intra-community supply.

Condition: good (used), You are bidding here on a branded guillotine shear and a folding machine from the well-known German manufacturer Schechtl. Dcsdpfxeyviwqo Apmop Device features: - Guillotine Shear MSB 200: - Cuts 3 mm steel – significantly more for aluminum - Cutting length: slightly over 2 m - Front support table - 500 mm back gauge - Optional sheet metal tray - Free loading available - Folding Machine Schechtl MAX 200: - Rail bends cleanly – test possible - Degree indicator - Bending length: slightly over 2 m - Sheet thickness: 2.5 mm (steel, sheet metal, aluminum, zinc, etc., higher for softer materials) - Standard rail – special radius rails for aluminum and zinc available upon request (add-on and special rails) - Foot pedal operation - Optional back gauge We also have available: Schechtl MSB 200, Schechtl MA 200, Schechtl HA 200 (2 mm), segmented RAS 2 m / 2 mm, and many others from 1 to 6 m. You will receive an invoice with VAT shown separately. Shipping can be arranged upon request. Free loading as shown in the pictures. Inspection and testing possible by prior phone appointment. Payment in cash upon collection – if you need anything else, please give me a call. Thank you! Collection should take place within 8 days after the end of the auction. Location: 97249 Eisingen (3 minutes from the motorway) Item numbers: 251007 and 251008

Condition: good (used), Year of construction: 1994, functionality: fully functional, machine/vehicle number: 13960, overall weight: 3,340 kg, Göteneds K25-25 A1200 Kombi – Metalworking Machine For sale is a robust and reliable combination machine from the Swedish manufacturer Göteneds. This machine is ideally suited for industrial metalworking applications, distinguished by its sturdy construction and precise operation. Technical Data: Manufacturer: Göteneds (Sweden) Model: K25-25 A1200 Kombi Working area (SS 1312): 2550 x 25 mm Serial number: 13960 Year of manufacture: 06/1994 Weight: approx. 3,340 kg Description: The machine is designed for demanding applications, offering high stability and dependable performance in continuous operation. Its massive construction makes it particularly well-suited for precise machining processes. Condition: Dcedpfx Asy D A Hnspmop Used, fully operational (more detailed condition information can be added – e.g., "can be inspected under power" or "regularly serviced"). Special features: High-quality machine made in Sweden Excellent build quality Industrial-grade design

Condition: good (used), Year of construction: 2020, operating hours: 42 h, functionality: fully functional, machine/vehicle number: 220/831, overall weight: 550 kg, total length: 2,200 mm, total height: 1,900 mm, total width: 1,100 mm, table width: 250 mm, table height: 900 mm, space requirement height: 2,000 mm, space requirement width: 1,200 mm, space requirement length: 2,500 mm, type of input current: three-phase, input voltage: 460 V, Equipment: CE marking, emergency stop, We have a bending machine for sale. It has only been used for 42 hours and 31 minutes, as can be seen in the attached picture. It is in good condition and well-maintained. If you are interested and require further details, please call or send me an email. Dcjds Afyq Uopfx Apmep

Condition: used, Year of construction: 1978, Equipment: documentation/manual, emergency stop, foot remote control, I am offering an electro-hydraulic profile bending machine, purchased in 2012, manufactured by Roundo AB, Sweden, type: R-7S (used, workshop-inspected, and partially refurbished with standard configuration, including vertically arranged bending axes, for sale. It is fully operational and can be demonstrated under power after prior consultation. - Control panel on the swivel arm with joysticks and switches - Digital displays for the two side rollers Significant added value: Extensive tool and profile package included! To be able to handle customer orders in an even more flexible and individual manner, significant investments have been made in expanding the range of tools. In addition to the standard tools, you will receive: • 36 additional rollers for a wide variety of profiles. • Special tool for flat and light-duty profiles up to a height of 500 mm. • Tools for square and rectangular tubes. • Tools for various round tubes Ø (88.9 + 114.3 + 139.7 + 168.3) mm. This machine is designed according to the latest findings in the tube and profile processing industry (as of 2012). The fixed bending roller is equipped with an adjustable slip clutch, which automatically adjusts the speed of the bending roller to the workpiece being bent. The three bending axes are mounted on oscillating roller bearings. Dcodpfx Asz Nhlijpmsp A set of complete universal bending rollers for bending angle and T-sections with flange facing inwards and outwards, flat sections upright and lying flat, and square material. The rollers are made of wear-resistant and hardened steel. They consist of three adjustable rings, allowing various profiles to be rolled. Two independently adjustable guide rollers, which can be adjusted fully hydraulically on three different axes. The guide roller unit is equipped with small, interchangeable rollers. This allows asymmetric profiles to be held flat. This is especially necessary for angle sections with the flange facing inwards. Maximum pressure valve to prevent machine overload. Thermal overload protection for both electric motors. Main switch, emergency stop switch, 24 V transformer, equipment according to UVV standards. Multi-button switch mounted on the swivel arm for operating the machine. A set of keys and tools including operating manual in German. In practice, it has been shown that the quality of bending angle steel with the existing standard roller sets leads to limited results. Extensive investment! In recent years, important core components of the hydraulic system have been professionally renewed. The execution of the work is fully documented with existing invoices: • 2021: All hydraulic hoses were completely replaced. • 2022: As part of an oil leak repair, a brand new Bauer hydraulic motor was installed. The total cost for the motor including professional installation amounted to approximately €21,000 net. • Proof is available for the hydraulic motor: Test Certificate for Hydraulic Motors, Certificate of Conformity, Manufacture Certificate, and invoices. Sales and delivery conditions: • Pricing: Ex works (net, plus VAT). • Logistics: The dismantling, loading and collection must be organized and carried out by the buyer himself or by a freight forwarder commissioned by him. • Technical specifications according to existing documents. Subject to prior sale.

Condition: used, functionality: fully functional, degree of automation: semi-automatic, actuation type: hydraulic, pipe diameter (max.): 42 mm, pipe length (max.): 2,000 mm, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, operating pressure: 220 bar, Equipment: documentation/manual, emergency stop, Sommer pipe bending machine for sale We are selling a Sommer pipe bending machine. The machine is fully functional and can be tested on-site with power, subject to prior arrangement. Dcsdo Aazvnspfx Apmsp The original hydraulic unit has been replaced with an external hydraulic unit. If you are interested or have any questions, please do not hesitate to contact us.