Used Segmental Circular Saw for sale (6,579)

Condition: used, Longitudinal circular saw Longitudinal panel saw Cross-cut / longitudinal circular saw, year 1999 operates from below Cedpfxeq E Ivts Ac Nerb for lengths up to 4.7 m material thickness up to 110 mm also suitable as a travelling saw behind a production line INFO!! For such a new Flender circular saw flat motor 10 kW, you pay 4,700 EUR which is more than you pay for the entire machine at company jöma.

Condition: reconditioned (used), 1 pair of PERSKE flat motors, 5.5 kW each, well suited for pre-cutting circular saws in front of band saw lines, one with a right-hand thread and one with a left-hand thread, rated continuous power 5.5 kW, with new ball bearings, with 2 steel brackets (left and right) for mounting 1 KATT circular saw flat motor, 11 kW / 1450 rpm, flange Ø 200 mm, right-hand thread, second shaft stub for hydraulic pump drive with 150 mm Ø pulley, tested and fitted with new bearings, suitable e.g. for PAUL 27 AO cross-cut saw Crodsuqk Azepfx Ac Njb

Condition: used, Year of construction: 2015, saw blade diameter 350 mm Cutting capacity 90° (rectangle) 100 x 90 mm Cutting capacity 90° (square) 90 x 90 mm Cutting capacity 90° (round) Ø 95 mm Cutting capacity 45° (rectangle) 75 x 80 mm Cutting capacity 45° (square) 75 x 75 mm Cutting capacity 45° (round) Ø 90 mm spindle turning speed range 38/19 U/min power capacity 1,5 / 0,75 kW In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Crodpfx Aoygx Dyoc Nsb Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: excellent (used), length ca. 3.200 mm width ca. 1.400 mm height ca, 1.600 mm Motors 2 Credpfxoxwbpfj Ac Neb table - swivable Ja The stable Bäuerle KFL combined woodworking machine combines a sliding table saw, slot drilling machine, and table router with feed in one machine and comes with a wide range of accessories. Roller table: yes

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 11900715/C, saw blade diameter: 350 mm, feed length X-axis: 180 mm, feed length Z-axis: 170 mm, total length: 2,210 mm, total width: 1,100 mm, total height: 1,550 mm, cutting range round steel at 90°: 120 mm, cutting range round steel at 45°: 120 mm, type of input current: three-phase, rotational speed (min.): 15 rpm, rotational speed (max.): 90 rpm, cutting height (max.): 170 mm, overall weight: 530 kg, saw blade speed: 90 rpm, input voltage: 400 V, cutting range square steel at 45°: 100 mm, cutting range square steel at 90°: 105 mm, saw drive: 2,200 W, cutting diameter: 120 mm, saw blade bore: 32 mm, 2000 MEP Cobra 350AX Automatic Circular Cold Saw – Efficient Metal Cutting for Industrial Production Available now: MEP Cobra 350AX, a robust automatic cut-off circular saw, perfect for industrial metal cutting applications. Manufactured in 2000 and in good working condition, this machine combines manual and automatic operation modes, adjustable cutting settings, and a 350mm blade to deliver consistent, high-quality cuts. 🔧 Key Features: Blade Size: 350 × 32 × 2.5mm Spindle Motor Power: 2.2kW Blade Speeds: 15 / 30 / 45 / 90 rpm Vice Opening: 160mm Clamping Type: Pneumatic Power Supply: 400V / 3 Phase / 50Hz Manual & Automatic Modes: Yes Cutting Depth & Stop Height: Fully adjustable Machine Weight: 530kg Dimensions (L×W×H): 2210 × 1100 × 1550mm 📏 Cutting Capacities: At 0°: Round: 120mm Rectangular: 180 × 170mm Square: 105 × 105mm At 45° Left: Round: 120mm Rectangular: 135 × 60mm Square: 100 × 100mm At 45° Right: Round: 110mm Rectangular: 135 × 60mm Cedewtr Iyjpfx Ac Nerb Square: 95 × 95mm ⚙️ Ideal Applications: Cutting steel profiles, tubes, bars Suitable for light to medium-duty industrial production Great for fabrication shops, stockholders, and manufacturing plants ✅ Why Choose the MEP Cobra 350AX? Versatile cutting angles and profiles Dual operation mode (automatic/manual) Compact, efficient, and easy to integrate into existing workflows Pneumatic clamping ensures safety and consistency Low investment cost means big savings on a high-value machine MEP Cobra 350AX for sale Used automatic circular saw Cold saw for metal cutting Pneumatic clamping cold saw 350mm circular saw machine Industrial metal cut-off saw MEP saw 2000 model Automatic metal saw Ireland Circular saw for steel profiles 400V industrial cold saw Notes: *Specifications are given in good faith but not guaranteed*

Condition: good (used), Year of construction: 1998, machine/vehicle number: 119878, Offer 26098 Technical Data: - Saw blade diameter up to 400 mm - Cutting capacity at 90°: • Round: 130 mm • Square: 120 mm • Flat: 305 x 40 mm or 240 x 85 mm - Miter adjustable left & right: 0° – 90° Crodjy At D Iepfx Ac Nob - At 45°: • Round: 130 mm • Flat: 245 x 30 mm or 180 x 70 mm - Infinitely variable saw blade feed rate: 0 – 10 m/min - Saw blade cutting speed: 13 / 26 m/min - Saw drive: 400 V / 1.7 / 2.6 kW - Hydraulic drive: 400 V / 0.75 kW - Hydraulic material vice, steplessly adjustable clamping pressure - Handwheel for fine adjustment - Adjustable material stop - Coolant system - Discharge roller conveyor with length stop: 5000 mm - Infeed roller conveyor: 4000 mm - Space requirement: approx. W 800 x H 1770 x D 1020 mm - Weight: approx. 950 kg

Year of construction: 2015, condition: ready for operation (used), Saw blade diameter: 400mm, miter range: +/-90°, max. round material cutting capacity: 130mm, max. square material cutting capacity: 120mm, max. flat material cutting capacity: 305mm/20mm, machine dimensions X/Y/Z: approx. 1050mm/900mm/1850mm, weight: approx. 850kg, on-site inspection is possible. Cjdpfx Acjy Ax Urs Nsrb

Year of construction: 1964, condition: ready for operation (used), An old segment cold circular saw Wagner Reutlingen is available. Series: 1, roller conveyor length: 4500mm, machine dimensions X/Y/Z: approx. 3000mm/1500mm/2300mm, weight: approx. 3000kg. An on-site inspection is possible. Codpfx Asy Ax Uxsc Norb

Condition: used, disk of circular saw-Ø: bis 250 mm cutting area at 90° round: ca. 7 5 mm Credpsb N Ehdofx Ac Nob cutting length: 500 mm electrical connection: 380 V sawing drive: 0,75/1,1 kW space needed: 1700/2100 x 900 x 1440 mm weight: 355 kg

Condition: excellent (used), machine/vehicle number: 68131, Cut-off saw Ø max .: 300 mm Crodpjfug Exsfx Ac Nob here cutting area round: 100 mm Saw head can be swiveled up to: 45 ° Vice clamping range up to: 160 mm Cutting saw speed: 2500 rpm Drive motor: 230 V, 1.1 kW Required space: 850 x 750 x 1500 mm Weight: 126 kg

Year of construction: 1988, condition: used, machine/vehicle number: 109357, disk of circular saw-Ø: 400 mm cutting area at 90° round: 130 mm cutting area at 90° square: 240 x 85 mm cutting area in mitre at 45° square: profiles flat 180 x 70 mm cutting speeds: 10/20 m/min Credob Sciaspfx Ac Nob forward feed speeds: 0 - 1000 mm/min electrical connection: 400 V, 1,7/2,6 V space needed: 2750 x 1500 x 1900 mm weight: 1350 kg

Condition: used, for saw blade Ø up to approx.: 280 mm Crjdpjb Nwgnefx Ac Neb here cutting height approx.: 70 mm saw blade speed: 2600 rpm drive motor: alternating current 220 V, 1,47 kW Space requirement: 670 x 520 x 800 mm Weight: 31 kg

Year of construction: 1966, condition: used, machine/vehicle number: 7293, disk of circular saw-Ø: 400 mm cutting area at 90° round: 120 mm cutting area at 90° square: 110 mm cutting speeds: 10 - 44 m/min forward feed speeds: 0 - 500 mm/min cutting length: 10 - 500 mm electrical connection: 380 V sawing drive: 4 kW Crjdpfsbr Hwdjx Ac Neb space needed: 1360 x 2650 x 1850 mm weight: 950 kg

Condition: used, disk of circular saw-Ø: bis 250 mm cutting area at 90° round: ca. 7 5 mm cutting length: 500 mm electrical connection: 380 V sawing drive: 0,75/1,1 kW space needed: 1700/2100 x 900 x 1440 mm Crodpfx Acobbbhno Nsb weight: 355 kg

Condition: new, Carbide tipped circular saw blades for aluminium machining with the following dimensions: 300 x 3,3 x 32 mm, 72 Z 350 x 3.2 x 20 mm, 84 Z 350 x 3.4 x 32 mm, 56 Z 350 x 3.4 x 32 mm, 72 Z (ground) Cjdpfx Ajc R Ty Ajc Norb 355 x 2.2 x 25 mm, 66 Z 350 x 4.2 x 34 mm, 54 Z

Year of construction: 1967, condition: used, machine/vehicle number: 9317, disk of circular saw-Ø: 275 mm cutting area at 90°: 120 x 75 mm cutting area at 45°: 90 x 65 mm rotations of disk: 2000 rpm engine: 380 V, 1,1 kW space needed: 700 x 900 x 1000 mm Csdpfxeb N Eicj Ac Norb

Year of construction: 1988, condition: used, machine/vehicle number: 103.071.3156.78192, disk of circular saw-Ø: 400 u. 425 mm cutting area at 90° round: 130 mm cutting area at 90° square: 120 x 120 mm cutting area in mitre at 45° round: 130 mm cutting area in mitre at 45° square: 110 x 110 mm cutting speeds: 11 u. 22 m/min Cjdez N Amepfx Ac Njrb forward feed speeds: 670 mm/min cutting length: m. automat. Vorschub bis 1200 mm electrical connection: 380 V, ca. 4 kVA V sawing drive: 1,6/2,5 kW space needed: 1800 x 3800 x 2000 mm weight: ca. 1800 kg

Year of construction: 1987, condition: good (used), machine/vehicle number: 108922, disk of circular saw-Ø: 400 mm cutting area at 90° round: 130 mm Credohz T Hfepfx Ac Neb cutting area at 90° square: 305 x 40 mm cutting area in mitre at 45° round: 130 mm cutting area in mitre at 45° square: 245 x 40 mm cutting speed: 10 m/min engine: 380 V, 1,7 kW space needed: 1100 x 1000 x 1900 mm weight: 700 kg

Year of construction: 1970, condition: good (used), machine/vehicle number: 1258, disk of circular saw-Ø: 315 mm cutting area at 90° round: 90 mm cutting area at 90° square: 80 x 80 mm cutting speeds: 12,5 - 25 m/min forward feed speeds: hydropneumat. stufenl. regelbar cutting length: 5 - 1580 mm saw drive: 380 V, 1,8/2,5 kW space needed: 2300 x 1000 x 2800 mm Crjdeh I Dvnspfx Ac Nsb weight: 940 kg

Year of construction: 1991, condition: good (used), machine/vehicle number: 900 1241, disk of circular saw-Ø: 275 mm Crsdpfxjm Twgws Ac Nob cutting area at 90° round: 90 mm cutting area at 90° square: 75 x 75 mm cutting area in mitre at 45° square: 75 x 75 mm disk rotations: 40/80 upm engine: 380 V, 1/1/2 kW space needed: 700 x 600 x 1580 mm weight: ca. 180 kg

Condition: excellent (used), Saw blade diameter: 360 mm Cutting range at 90° round: 110 mm Cutting range at 90° rectangular: 110 x 400 mm Cutting range in miter at 45° round: 110 mm Cutting range in miter at 45° rectangular: 110 x 280 mm Cutting speed: 16 - 50 m/min Drive motor: 380 V, approx. 1.5/2 kW Space required: 2600 x 1150 x 1600 mm Cedpjv D Hzkofx Ac Nsrb Weight: approx. 1000 kg

Condition: excellent (used), Saw blade Ø: 370 mm Cutting capacity at 90° round: 120 mm square: 100 mm rectangular: 180 x 100 mm at 45° round: 120 mm Cedjx Ek A Tspfx Ac Njrb square: 100 mm at 60° round: 110 mm square: 90 mm 2 saw blade speeds: 15/70 rpm Drive motor: 400 V, 1.8/2.2 kW Required space: 1000 x 1000 x 1800 mm Weight: 390 kg

Condition: ready for operation (used), Year of construction: 1983, machine/vehicle number: 3601, Saw blade diameter: 300 mm Saw blade speed: 2800 rpm Cutting capacity at 90°: 70 x 120 or 50 x 140 mm Mitre stops left and right: 15/22.5/30/45°, any intermediate position lockable Drive motor: 380 V, 2.2 kW Weight: 50 kg Csdpfjyh Hn Hsx Ac Nsrb

Condition: ready for operation (used), Year of construction: 1989, Saw blade Ø: 350 mm Cutting capacity: at 90° & 45°, round: 120 mm at 90°, flat: 170 x 100 mm Codpfxjxln Uks Ac Nsrb at 45°, flat: 120 x 100 mm at 90°, square: 100 mm at 45°, square: 95 mm 2 saw blade speeds: 17/34 rpm Drive motor: 400 V, 2/2.6 kW Weight: 425 kg Required space: 900 x 800 x 1800 mm

Condition: ready for operation (used), Saw blade Ø: 300 mm Cutting range at 90° round: 100 mm Cutting range at 90° rectangular: 90 x 90 mm Cutting range in mitre at 45° rectangle: approx. 40 x 120 mm Saw blade speed: 33/66 upm Drive motor: 380 V, approx. 1.3 kW Required space: 850 x 600 x 1600 mm Codsl Ra Uiepfx Ac Norb