Aluminium Circular Saw

MEP COBRA 352 MA

Condition: excellent (used), Year of construction: 2014, MEP Cobra 352 MA cold circular saw in very good condition. Year of manufacture: 2014 Shipping is possible. Iajdpfx Aeyzbmnjpnet

Condition: good (used), Make: OMERA Type: R4 / 12-2 Year: 1976 Table length : 1900 Table width : 1000 Steady arm throath HOR : 670 Steady arm throath VER: 940 Stroke cylinder : 350 Column diameter : 200 Specifications Metric US Standard There are no specifications for this machine (yet). Ijdpfx Aokvnumepnjat Dimensions (Estimate) Length 3000 mm Width 2200 mm Height 2500 mm Weight 2800 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, dimensions of saw-blade 350x32x4 mm vice 180 mm 1700/3400 U/min capacity 90 degrees: round 120 mm capacity 90 degrees: square 105 mm capacity 90 degrees: flat 180x70 mm capacity 45 degrees: round 120/110 mm capacity 45 degrees: square 100/95 mm capacity 45 degrees: flat 135x60 mm output 2,2 kw weight 225 kg Iaedpfx Apsy Dh Nnonet

Condition: used, Year of construction: 2020, dimensions of saw-blade 350x32x4 mm Iaedpfx Aeyvvnpspnot vice 180 mm 1700/3400 U/min capacity 90 degrees: round 120 mm capacity 90 degrees: square 105 mm capacity 90 degrees: flat 180x70 mm capacity 45 degrees: round 120/110 mm capacity 45 degrees: square 100/95 mm capacity 45 degrees: flat 135x60 mm output 2,2 kw weight 225 kg

Condition: used, Year of construction: 2023, DOUBLE GLASS BEAD SAW TRF 527 VIS CE 1 pc DOUBLE GLASS BEAD SAW TRF 527 VIS CE TRF 527 VIS: Double miter saw for the simultaneous cutting of two glass beads positioned one above the other. The right saw unit is fixed, adjustment of the left unit is via the set cutting length can be read off a digital display. The units have supports that allow two glass beads to be cut simultaneously. The upper support can be removed for cutting larger cross-sections. After the cutting process is completed, the pneumatic clamping cylinders automatically swing to the side to simplify loading and unloading of the machine. STANDARD EQUIPMENT • Fixed unit on the right • Digital dimension display • Pressure switch • 2 HM-tipped saw blades • Electrical system with motor brake, undervoltage release, motor protection switch • Pressure switch • Tool set • Guards with horizontal clamping devices, pivoting • Two-hand control • Belt drive • Pneumatic unit lift • Middle support TECHNICAL DATA • Motor power 2 x 1.2 kW • Saw blade diameter Ø 220 mm • Max. cutting height without support 80 mm • Max. cutting width at 90 degrees 55 mm • Max. cutting width at 45 degrees 40 mm • Max. cutting length 2800 mm (optional 4000 mm) • Min. cutting length 158 mm • Weight 217 kg • Space requirement (standard equipment) 3000 x 850 mm Extended cutting capacity 1 pc Maximum cutting length • 4000 mm Star stop 4 positions 1 pc set 2 mechanical stops for adjusting up to 4 intermediate angles. Additional center support. 1 adjustment for rebated profiles. 1 adjustment for rebated profiles as per drawing: - Attachment to the clamping devices to compensate for the profile inclination - Allowances on the rear stops of the units and the center support. The sketch below shows (in green) a beveled presser that follows the inclined profile and presses it against the allowance on the stop (shown in red). Ijdpfx Ajxnlgcepneat Storage location: Garbsen

Condition: new, saw blade diameter 350 x 32 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 105 mm capacity 90 degrees: flat 180 x 70 mm capacity 45 degrees: round 120 mm links capacity 45 degrees: round 110 mm rechts capacity 45 degrees: square 100 mm links capacity 45 degrees: square 95 mm rechts capacity 45 degrees: flat 135 x 60 mm dimensions of saw-blade 350 x 32 turning speeds 1700 / 3400 U/min capacity 45 degrees: round 120 mm total power requirement 1,5 / 2,2 kW weight of the machine ca. 210 kg dimensions of the machine ca. 1170 x 860 x 1600 mm Description: manual high-performance circular saw for cuts from 45 ° right to 45 ° left in aluminum and lightweight metal alloys, with 2 speeds Furnishing: - with pneumatic vices - The saw head can be tilted by 45 ° on one side - Heavy cast iron construction - ensures vibration-free operation and maximum precision - The head can also be tilted up to 45 ° - Powerful, 2-stage drive with double V-belts - large turntable with bearings - Lubrication device with mechanical diaphragm pump - Extraction nozzle for connecting a chip extractor Isdpfx Aoxaai Nepnsat Scope of delivery: - Adjustable length stop 600 mm - tool kit - Instructions with wiring diagram - Crane eyes for transport * The machine is delivered without a saw blade Special accessories: - including base

Condition: excellent (used), Year of construction: 1975, -KOM 1002-

 Offered here is a press of the company HYDRAP of the type HKPS8000. Technical data: Type: HKPS8000
 Year of manufacture: 1975
 Iasdpfxsg Ufvbs Apnst effective stroke: 200mm throat: 250mm (at center) table size: 320x320mm Installation height: approx. 345mm Voltage: 380V 
Perm. load: 80000N
 Drive type: HYDR Drive power: 1,5kW Oil quantity: 60l Oil viscosity: 3°E

Year of construction: 1977, condition: refurbished (used), I sell the double mitre saw Rapid DGS, year 1977. Tilting heads Drilling front heads on each side included Iaedpfx Apod N Rb Donet Very good condition. Available immediately.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: manual, degree of automation: manual, actuation type: manual, bending angle (max.): 130 °, overall weight: 430 kg, warranty duration: 24 months, Sheet Metal Bending Machine / Brake - Bender 3100mm - RG-C 3007 + Cutter RC-0.8 3-Meter Sheet Metal Bender – Professional Solution for Roofing contractors Our 3-meter sheet metal bender is a high-quality machine designed for roofing contractors and companies specializing in sheet metal processing who value precision, durability, and ergonomic operation. With its robust construction and precise craftsmanship, it ensures reliability and ease of use even under intensive working conditions. Key Features: ✅ Working length: 3 meters – allows bending of large metal sheets, increasing work efficiency. ✅ Sturdy steel construction – guarantees longevity and resistance to deformation. Iodpjv Ax N Dsfx Apnoat ✅ Precision bending – perfect for producing roofing elements, sheet metal trims, and gutters. ✅ Easy operation – an intuitive control mechanism enables quick and accurate sheet shaping. ✅ High clamping force – stabilizes the material, ensuring uniform bending along the entire length. Our 3-meter sheet metal bender is an indispensable tool on any construction site, improving the quality and efficiency of roofing work. 3-Meter Sheet Metal Bender – Technical Specifications Maximum bending length: 3100 mm / 122" Maximum bending capacity: Steel sheet: up to 0.7 mm Aluminum sheet: up to 1.0 mm Copper and zinc sheet: up to 1.0 mm Maximum bending angle: 130° Bending beam thickness: 30 mm Maximum clamping beam lift height: 80 mm Overall dimensions: 3460 x 900 x 1200 mm Weight: Approx. 450 kg (varies depending on configuration) Clamping system: Manual with high clamping force for stable operation Construction: Heavy-duty steel frame ensuring durability and precision Accessories (included): Back support arms for large sheets Functional protractor for precise angle bending Roller cutter / shear - for quick and precise cutting of sheet metal along the working length of the bending machine Optional accessories (not included): Swivel castors with brake - (4 pcs.) - €160.00 This 3-meter sheet metal bender offers precision, durability, and ease of use, making it an ideal choice for roofers and professionals who demand reliable performance in sheet metal forming. Contact us for more information and to find the perfect model for your needs! FREE SHIPPING TO GERMANY. Shipping costs to other countries on request.

Condition: like new (used), Year of construction: 2003, functionality: fully functional, Industrial Band Saw R800 - CENTAURO Used machine Year: 2003 Technical specifications: R800 disc wheels Steel frame Pneumatic braking of wheels 15° tilting table Friction rack Felt for blade cleaning and cooling Motor: 11 kW - 15 HP Automatic star/delta starter Telescopic blade guard Iaodpex Ifigefx Apnot Upper and lower blade guides with wooden inserts Cleaning scrapers on wheels Steel blade 5530x80x0.8 mm, 16 mm pitch Prepared for power feeder (not included) Machine options: RVP210 power feeder, variable speed + preparation and infeed rollers