Used Servo Drive Control for sale (58,813)

Condition: ready for operation (used), Mitsubishi SU-30A servo controller, serial number as shown in the photo, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Lrsdpfx Aaoi Eb Nzszjt

Condition: used, Year of construction: 2015, Processing Specifications: Maximum processing width: 610 mm Minimum processing width: 210 mm Maximum draw length without interruption: 610 mm or 410 mm, depending on configuration Minimum draw length without interruption: 50 mm Maximum draw length with interruption: 1,220 mm or 820 mm, depending on configuration Minimum draw length with interruption: 100 mm Maximum cycle rate: 210 cycles/min Maximum line speed: 50 m/min Unwinder: Ljdpfx Ajzqt Dnsazort Maximum reel diameter: Ø1,000 mm Maximum reel weight: 700 kg Web width with 48-inch unwinder: 410–1,220 mm Web width with 60-inch unwinder: 410–1,520 mm Processable Materials: Polyester laminates: from 40 μm BOPP laminates: from 40 μm CPP laminates: from 40 μm Nylon-based co-extruded films: from 50 μm EVOH-based co-extruded films: from 50 μm LD/LLD-based co-extruded films: from 50 μm BOPP film: from 30 μm Aluminum foil structures Coated paper Tyvek Maximum sealable film thickness: 150 μm Pouch Types: • TSP pouches • Stand-up pouches • Supported-film pouches Electrical Data: Power supply: AC, 3 Phase Available voltage: 20 / 240 / 380 / 415 / 480 V ±6% Frequency: 50/60 Hz Machine-specific supply: 380 V, 50 Hz, 3 Phase Machine electrical load: 35 kVA Pneumatic Requirements: Air consumption: 1,000 L/min at NTP Installed configuration air requirement: 3,000 L/min Minimum operating pressure: 6 kg/cm² Air supply must be free from moisture and dust Cooling Water: Water consumption: 20 L/min Required water temperature: 15–17 °C Standard Machine Features: • Servo-driven film indexing • Microprocessor-based control • Operator console for process parameter settings • Servo tension dancer assemblies with feedback control • Tail-feed-assisted film draw mechanism • Servo-driven reciprocating sealing system • Servo-actuated sealing bars • Progressive sealing and rapid seal-area cooling • Three-stage bottom sealing followed by cooling • Adjustable sliding sealing stations • PID temperature controllers with auto-tuning • Photo-registration mark scanner • Guillotine-type shearing station with servo fine adjustment • Trimming station with trim removal • Recipe memory for frequently used jobs • Adjustable sealing temperature, pressure and dwell time • Automatic stacking system

Condition: used, Electromechanical actuator for valves, valve drive, actuator, servomotor, air damper actuator Lrodpfx Asgg Tg Isazst -Manufacturer: Siemens, air damper actuator -Type: SQN13.140A9 -Number: 2 pieces available -Price: per piece -Dimension box: 155/95/70 mm -Weight: 0.4 kg/piece

Condition: used, CNC turning machine MONFORTS, type RNC 300 MultiTurn with driven tools and Y-axis Year of manufacture 2005 CNC control system FANUC Series 18i-TB Maximum turning diameter over the bed cover 380 mm Spindle bore 67 mm Spindle speed 25 - 5000 rpm Tool turret 12 stations Tool holder, cylindrical VDI 30 mm Motor power, spindle drive 23 kW Total power consumption 41 kVA Mains connection 400 volts, 50 Hz, 63 amps - with tailstock, chuck and collet chuck system - 3-jaw chuck SCHUNK ROTA NCD Ø 165 mm with a large number of chuck jaws - Collet chuck system HAINBUCH 65, without collets (only one collet as a sample) - 25 tool holders VDI 30 - 4 driven tools with collet ER 25 Ljdpfx Aaezfau Aszert - Chip conveyor with integrated coolant system - approx. 20,000 operating hours Machine footprint with chip conveyor L x W x H approx. 4100 x 2600 x 2100 mm Footprint of the base machine L x W x H 3000 x 2400 x 2100 mm Weight approx. 6 tons very good condition

Condition: new, Control Techniques Commander SE SE22T 15 kW Frequency Inverter – New New and unused Control Techniques Commander SE variable frequency drive. Technical details: Manufacturer: Control Techniques Series: Commander SE Model: SE22T Part No.: SE43401500 Rated power: 15 kW Input: 3-phase, 380–480 V, 50/60 Hz Input current: 27.4 A Output: 3-phase, 0–480 V Output frequency: 0–1000 Hz Output current: 30.5 A Serial No.: 2050601671 Designed in the UK Condition: New / unused The frequency inverter comes from surplus industrial stock and has never been put into operation. Condition: New / unused surplus stock. Lredpfx Aoz D Tcueazjt Sold as-is, without warranty or guarantee. No claims or returns. The buyer is responsible for verifying compatibility and suitability for the intended application. Immediately available from stock in Rotterdam, The Netherlands.

Condition: ready for operation (used), Stöber FDS5055/L Posidrive servo drive HW 11 SW 5.3C, serial number: 8702144, used, in good condition, 100% fully functional, scope of delivery as shown in the photos. Lrsdpfx Aez Ac I Hsazet

Condition: ready for operation (used), Bosch ASM 25 Servo Drive SN: 302650 DC 520V, used, normal signs of use, 100% functional, delivery contents as per photos Lrodemgwufspfx Aazjt

Condition: ready for operation (used), Indramat DDC01.2-N200A-DL01-01-FW Digital A.C. Servo Compact Controller DDC, serial number: 270812-08138, used, with normal signs of wear, 100% functional. Lrodpoi Ebd Eofx Aazst

Condition: ready for operation (used), Control Techniques 190U2B300BARAA215320 Servo motor SN:867324 , professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery according to photos, The agreed sales discounts do not apply to this item. Please ask for price separately! Ljdpjtt Hnksfx Aazsrt

Condition: ready for operation (used), Control Techniques SE43401500 SE 22T Commander frequency inverter, serial number 3960768008 / the cover is loose and has minimal damage, see pictures!! Used, in good condition, 100% functional, scope of delivery as shown in the photos. Lredpjzzurzofx Aazjt

Condition: new, Year of construction: 2025, functionality: fully functional, travel distance X-axis: 2,500 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: Heidenhain, controller model: iTNC640, table width: 800 mm, table length: 2,700 mm, rotary table diameter: 700 mm, spindle speed (max.): 15,000 rpm, coolant supply: 25 bar, spindle motor power: 46,000 W, number of spindles: 1, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, DEMONSTRATION MACHINE This 5-axis machining center enables the complete machining of long components without the need for re-clamping. It is designed to ensure a high degree of dynamics and speed, despite its high stability and rigidity. The cross slide, traveling column, and bed are made of a steel/welded construction. The large tool magazine, connected to the column, ensures short tool change times. The machining center, "made in Italy," is equipped exclusively with European quality components. Special equipment for the demonstration machine: Kessler milling spindle SK40, 60-position tool magazine, air through the spindle, flushing gun for cleaning the work area (including its own pump), Heidenhain TS460 wireless measuring probe (workpiece measurement), BLUM laser tool measurement, Heidenhain automatic kinematic control, rotating control panel, 25 bar internal coolant system, interface for KNOLL filter system, oil mist extraction Available for immediate delivery. While supplies last. Lrjdpfx Asz D Eruoazot

Condition: good (used), Servo motor, electric motor, DC motor, stepper motor, stepper motor -Manufacturer: Control Techniques, Servomotor type DutymAx MS 75MSA600T -Speed: 6000 rpm -Voltage: 220 V Lsdpfx Aaozul Aqezert -Shaft: Ø 11 x 21 mm -Quantity: 1x servo motor available -Dimensions: 245/75/H120 mm -Weight: 3.1 kg

Condition: good (used), Servo motor, electric motor, DC motor, stepper motor, stepper motor -Manufacturer: Control Techniques, Servomotor type DutymAx MS 75MSB300TAAAA -Speed: 3000 rpm -Voltage: 210 / 240 V -Shaft: Ø 14 x 28 mm Ledpfjzuliqjx Aazsrt -Number: 2x servo motors available -Price: per piece -Dimensions: 280/76/H120 mm -Weight: 3.9 kg/pc.

Condition: used, functionality: unexamined, Ferwood Code: RU0001316 - Manufacturer Code: SE33400750 - Condition: Used - Functionality: Untested - If interested we offer a revision service, contact us. Lredpev Du H Iofx Aazot

Condition: used, functionality: unexamined, Ferwood Code: RU0002860 - Manufacturer Code: SE23400075 - Condition: Used - Functionality: Untested - If interested we offer a revision service, contact us. Ljdpfxev D H Dls Aazsrt

Condition: used, functionality: unexamined, Ferwood Code: RU0002713 - Manufacturer Code: SE23400220 - Condition: Used - Functionality: Untested - If interested we offer a revision service, contact us. Lrsdpfsv Dvm Asx Aazst

Condition: used, functionality: unexamined, Ferwood Code: RU0002714 - Manufacturer Code: SE23400150 - Condition: Used - Functionality: Untested - If interested we offer a revision service, contact us. Lrjdpfjv Ed Epjx Aazot

Year of construction: 2022, condition: new, functionality: fully functional, machine/vehicle number: Q230213, For sale is an unused system for flameless explosion pressure relief, manufactured by REMBE. The device is in absolutely new condition, still packaged in its original wooden transport crate, and will be delivered including original documentation and accessories. Technical data (according to the nameplate): Manufacturer: REMBE GmbH Safety+Control Type: Q-Rohr-3-G-24 Nominal size: DN 600 / 24" Relief area: 2700 cm² Material: Stainless steel Seal: Graphite Burst pressure (at 22 °C): nominal 0.700 bar g (min. 0.595 / max. 0.805) Certification: ATEX (IBExU 16 ATEX 2029 X) Signal unit: ROSE Systemtechnik (Type 15.061003, max. temperature 200 °C) Scope of delivery: 1x REMBE Q-Rohr-3-G-24 (in original wooden crate) 1x Original operating manual 1x PHOENIX CONTACT isolation amplifier (MACX MCR-EX-SL-2NAM-T-SP, original packaging) Ljdpfx Aezxgtfjazsrt The system is ideal for industrial and process plants that require the highest ATEX safety standards. An on-site inspection is possible by arrangement.

Condition: good (used), gear motor, electric motor, electric gear motor -Manufacturer: Watt Drive, gear motor type SUA 506B IA 81N4 -Speed: 13.7 rpm -Engine: Type WAF81N4 0.75 kW -Shaft: Ø 30 x 125 mm -Protection class: IP55 -Dimensions: 480/210/H240 mm -Weight: 37 kg Lrodpovzx Hyjfx Aazet

Condition: used, pressure sensor, pressure transmitter, pressure transmitter, pressure switch, -Manufacturer: Huba control, pressure transmitter type 691.9300071D orig -Input: 0... 10 bar -Pressure: max. 20 bar -Number: 3x transmitter available Lrjdpslfihnsfx Aazet -Price per piece -Cardboard dimensions: 140/70/H45 mm -Weight: 0.3 kg/pc.

Condition: used, Telecentric lighting, LED lighting, Telecentric lens, Measuring lens, Industrial camera -Manufacturer: Basler Vision Control, industrial camera with telecentric lens -Camera: Basler Type piA2400-17gm -Lens: type vicotar T201/0.15 -Total dimensions: Ø 70 x 345 mm Lsdpfx Ajutuwbjazort -Weight: 1.2 kg

Condition: used, Telecentric lighting, LED lighting -Manufacturer: Vision Control, Telecentric Lighting -Type: TZB60-B -Light field diameter: 60 mm Lredpfsututiox Aazjt -Dimensions: 140/70/H115 mm -Weight: 0.8 kg

Condition: good (used), servo motor, DC motor, servo gear motor, servo actuator, drive actuator, servo drive Ledevpffxopfx Aazjrt -Manufacturer: HD Harmonic Drive, Hi-T Drive SERVO ACTUATOR -Type: RH-8-3006-T-SP -Shaft: Ø 18 x 20 mm -Dimensions: 200/60/H65 mm -Weight: 1.0 kg

Condition: used, CNC control, control panel, machining center, server cabinet -I/O Control: control panel -Dell: Desktop KXGVD -Dell: Optiplex 390 Tower Lrjdpfx Aajfkq T Tszst -Dimensions: 505/640/H1600 mm -Weight: 72 kg

Condition: good (used), Converter module -Type: S 909 -Number: 2x module converters available -Price: per piece -Weight: 6.3 kg Lrjdeb A Hv Sjpfx Aazot