Used Sharpener Bandsaws for sale (1,010)

Condition: new, Year of construction: 2026, The CORMAK EX14 4-14mm end mill sharpener is a professional device for sharpening cylindrical end mills. Thanks to it, you can quickly and precisely refresh the cutting edges of milling cutters, without the need for experience in this field. The sharpener is equipped with an efficient engine that ensures stable operating frequency and long-term use. Additionally, the diamond grinding wheel guarantees precise results and long-term performance. This reliable device contributes to cost savings and increases work efficiency. Device characteristics The CORMAK EX14 4-14mm end mill sharpener is a high-quality device designed for sharpening shank milling cutters with 2, 3 or 4 feathers, and from a diameter of 12 mm with 6 blades. Thanks to this, the user can easily sharpen, restoring the optimal cutting properties of the milling cutters, without the need for experience in this field. The CORMAK EX14 sharpener grinds milling cutters quickly and precisely, which significantly improves the process of their maintenance. Thanks to this, the tools are ready for reuse in a short time, which translates into cost savings and increased work efficiency. The efficient engine ensures stable operating frequency and optimal power. Thanks to it, the device works efficiently and reliably for a long time, regardless of the load. This is important because it ensures the stability of cutter sharpening and precise effects. An important element of the sharpener is the diamond grinding wheel, which ensures precise and long-lasting work. Thanks to the high-quality material, it is highly resistant to wear. Rcodpjvakc Rjfx Abujh Technical parameters: Collets 4, 6, 8, 10, 12, 14 mm Power 180W Voltage 230V Weight approx. 14 kg Dimensions 350x230x240mm

Condition: excellent (used), Year of construction: 2003, Veneer saw Langzauner LZ 5/2 - 3500, precision cutting saw with jointing unit (planer unit) and veneer support table Robust machine construction by Langzauner A video of the machine in operation can be sent upon request. For tear-free and gap-free cutting of veneer, including thick veneer Cutting length max. 3500mm Cutting and jointing height max. 40mm Easy-to-guide unit, runs on two hardened, ground linear guide shafts Rear support table with continuous finger stop, adjustable from approx. 2 - 56cm, with pneumatic clamping and digital display The crosscut table is very solidly constructed and runs on parallel circular guides; it is slightly offset to the right so that crosscuts can be made on the left side of the veneer packs Angle stop on the support table and on the front support for end cuts of the veneer packs Special equipment with rack-and-pinion compensation for the pressure bar, which prevents the pressure bar from tilting pneumatic workpiece clamping, also holds in the center position Drive motor saw 2.2kW, milling unit 1.1kW The motors can be easily switched on at the handle, so they only run when needed. When switched on, the saw and the milling unit are automatically engaged by compressed air; the cutting height can be selected in three positions using a turret stop. Carbide-tipped precision cutting blade, sharpened Planer head Z4 with pull-cut, equipped with new carbide inserts and spare blades included Rjdpfxj Afznuj Abujch Practical front veneer support, automatically extended pneumatically when the planer unit is used Dust extraction connection 150mm with dust extraction channel V-belt renewed CE marking Emergency stop cable Operating manual Onboard tools Original paint, only a few spots have been touched up The machine is in excellent condition and has obviously only been used rarely. Dimensions approx. 5050 x 1500 x 1450mm (LxWxH). Weight approx. 1000kg. The machine can be demonstrated on site by appointment. We only offer machines that are available in our warehouse and ready for demonstration; see "other offers from this provider".

Condition: used, total width: 800 mm, total length: 2,200 mm, total height: 1,500 mm, Colour: Green Empty weight: 1.000 kg Knife bench, knife sharpening machine grinder Model: Conventional Manufacturer: Erma Fulda Type: ASM-8/4 Series: 045371 Travel: 1200mm Table: 800x150mm Motor: 1.85kW Max. Spindle speed: 2730 rpm Grinding diameter: 165mm Machine-size: 2000x800x1550mm Machine-weight: 500kg - Serial number: 045371 - Drive system: Conventional - Power [kW]: 1.9 - Number of axes [pcs]: 1 - X-axis travel [mm]: 1200 - Table width [mm]: 800 - Table depth [mm]: 150 - Max. grinding wheel diameter [mm]: 165 - Max. spindle speed [rpm]: 2730 - Options: Knife Sharpener, Tiltable magnet - Transport dimensions: 2200mm x 800mm x 1500mm (l x w x h) - Transport weight [kg]: 1000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Rodpfx Abjz Ain Tsujch Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, functionality: fully functional, EYAN Universal Tool Grinding Machine – Used, including extensive accessories & documentation For sale is a high-quality universal tool grinding machine from the EYAN brand, in good used condition. The machine is ideally suited for the precise re-grinding and production of various cutting tools and is perfect for professional toolmaking as well as for locksmiths, maintenance companies, and training workshops. Thanks to its robust cast iron construction, the machine impresses with its smooth operation, stability, and precise grinding results. Equipment EYAN Universal Tool Grinding Machine Precision chuck / tool holder Extensive adjustment and setting options Machine lamp Grinding wheel mounted Original under-cabinet with storage space Original operating manual Technical documentation Spare parts lists and documents Additional accessories and tools in the under-cabinet (see pictures) 400 V high-voltage connection Rcodpezhx D Isfx Abujh Condition The machine is in good, used condition with the usual signs of wear and tear. It comes from an operating business and was in use until recently. Scope of delivery EYAN Universal Tool Grinding Machine Under-cabinet Chuck Grinding wheel Original operating manual Technical documentation Spare parts documents Accessories and tools as shown in the photos Application areas Tool and mold making Metalworking Locksmith shops CNC manufacturing Training companies Maintenance and repair Tool grinding machine, universal tool grinding machine, tool grinder, milling cutter grinding machine, drill bit grinding machine, milling cutter grinding, twist drill grinding, turning tool grinding, tool sharpening machine, precision grinding machine, toolmaking, metalworking, grinding machine, EYAN, universal grinder, tool grinder, cutter grinder, tool grinding, tool sharpening, 400V, industrial, workshop machine, mechanical engineering, grinding technology. An inspection and functional test are possible at any time by prior arrangement. Net price, plus 19% VAT.

Condition: good (used), Year of construction: 2016, Experience seamless operation with all movements meticulously controlled by NC technology, ensuring swift and precise cuts every time. Boasting CNC controlled cutting height as standard, this machine provides unmatched versatility and precision in your cutting operations. Tailored for the demands of the roof truss and timber frame industries, this 3-axis CNC upstroke crosscut saw sets the standard for accuracy and reliability with a 700mm saw blade and 7.5hp motor. Whether you're tackling compound angle cutting or executing long scarf cuts, the HMZ-3 delivers flawless results with every cut due to its large cutting height of up to 250mm and capability to handle even the most intricate cutting tasks. An onboard optimisation package is included which allows cutting lists to be test optimised against timber lengths to generate a pre-optimised cutting list. Rcsdpj Agnz Nefx Abujh Specification 6000mm infeed capacity Right-to-left feed orientation HM-Z saw unit with 700mm blade and centre-line cutting 4000mm outfeed table Onboard optimisation Outfeed monitor

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1000x1500x1800 mm Weight 570 kg Rcsdpfxev A Hgdo Abuoh Total power requirement 3 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1400x1300x1800 mm Rcjdpfsv A Hgksx Abuoh Weight 0 kg Total power requirement 2,2 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 0x0x0 mm Weight 29 kg Rsdpfov A Hhhsx Abujch Total power requirement 0,25 kw

Condition: used, functionality: fully functional, Type: BAS Max welding width up to 50 [mm]. Flash Butt welding machine. Manual clamping. Blade width up to 50 [mm]. Used machine in working condition. Machine painted. Weld band saw blades for wood up to 50 [mm]. Weld band saw blades for metal up to 34 [mm]. Rsdpfxjw Snu So Abusch Delivery from stock. Connection: 220 [V]. Weight: cca. 180 [KG]. Packing included.

Condition: new, Year of construction: 2026, CORMAK HBS421 Wood Band Saw Main Advantages – Why Choose the HBS421 Wood Band Saw High stability of the cutting system – reduced vibration levels ensure cleaner cuts and extend blade life. Large cutting capacity – comfortable operation with larger workpieces such as panels, beams, and structural wooden elements. Precision work table – provides reliable support for the workpiece and maintains accurate cutting angles during operation. Controlled blade tensioning system – stable blade guidance improves cutting straightness and minimizes blade drift. Adjustable blade speed – allows optimization according to wood species, material thickness, and cutting type (rip cutting or cross cutting). Efficient dust extraction solutions – the extraction outlets allow easy connection to professional dust collection systems. Construction and Technology – Detailed Technical Description The CORMAK HBS421 wood band saw features a vertical design, providing convenient material handling on the work table and allowing both straight and curved cuts. In professional woodworking applications, structural rigidity is essential; therefore, the machine body and main supporting components are designed to maintain wheel alignment and ensure smooth, precise blade movement. Drive Wheels and Blade Guidance System In professional band saws, cutting quality largely depends on the accuracy of the blade guidance system. Properly designed drive wheels ensure correct blade operation along its entire length, reducing slipping and limiting local overloads. This results in: Rcjdpfx Abjyk Apnsujh lower vibration levels during higher feed rates, improved edge quality, especially when cutting hardwood species, extended blade service life thanks to stable operation and correct tensioning. Work Table and Angle Adjustment The work table provides stable support for the material and ensures repeatable cutting results. In the CORMAK HBS421 wood band saw, both table rigidity and adjustment capabilities are important features, allowing precise angled cuts. This solution is particularly valued in woodworking facilities where quick transitions between different operations are required, including: material sizing, preparation of structural components, precision trimming operations. Drive System and Continuous Operation The band saw drive system is designed for demanding working conditions, while the three-phase power supply ensures smooth operation and stable torque delivery. As a result, the vertical wood band saw maintains consistent cutting performance even when processing thicker materials, which is essential in production environments. The adjustable blade speed allows operators to optimize machine performance for specific tasks, reducing the risk of edge burning and improving control over the cutting process. Standard Equipment High-voltage release safety switch Dust extraction outlets 2 × 100 mm Precision rip fence Cutting blade 3345 × 20 mm, 8 TPI Technical Specifications Parameter Specification Wheel diameter 480 mm Maximum cutting height 240 mm Maximum cutting width 405 mm Blade width range 9.5 – 38.1 mm Blade length 3345 mm Blade speed 7 / 14 m/s Table tilt range 0° to +45° Table dimensions 535 × 435 mm Overall dimensions 830 × 550 × 2070 mm Weight 160 kg Motor power S1 – 2.2 kW / S6 – 3.1 kW Power supply 3-phase, 400 V Operating manual (DTR) Included CE declaration Yes

Condition: new, Year of construction: 2026, Sawblade width max. 120 mm Weight 350 kg Motor output 1,3 kW WINTER AUTOMATIC BAND SAW GRINDING MACHINE BANDSAWMAX 120 PNK-AB PNK-AB is specially designed for grinding the teeth of various band saw blades used in various forms, width and thickness. Compact and rigid grinding unit moving on linear bearings of PNK-AB machine provides precise and stable grinding. Technical specifications: - Band Saw Width 15-120mm - Tooth pitch Max. 60mm Tooth depth 0-30mm - Tooth forms PV,NV,KV,PU,NU - Hook angle -10° to +30° - Feeding rate 0-90 teeth/min. - Motor quantity 2 - Grinding wheel motor – 1.1kW, 1400 r.p.m. - Gearbox motor double-rev. – 0.55kW, 1400 r.p.m - Grinding wheel diameter Ø250mm - Grinding wheel bore diameter Ø20mm - Grinding wheel thickness 8mm/10mm/13mm (depending tooth pitch) - Operating voltage 400V, 3Ph, 50-60Hz - Total power ~1,3kW - Dimensions 80*120*175cm - Net/gross weight 350/375kg PNK-AB General Features: - Automatic grinding of band saw blades up to 120mm width. - Grinding wheel riding on linear rails. - Non-corroding and hardening plating on all mechanical components. - On/off switch. - Max 60mm tooth pitch. - Ease of use. - Minimum space required. - Fast and precise grinding of NV,PV and KV tooth forms. - Manual central lubrication. - Manual saw holder and blade lifting system. - Optional circular(HSS) and gang saw grinding attachments. - Production conformed with CE standards Capacity: Grinding up to 30 band saws per day. Optional supplements: - CBN Woodmizer wheel nett price EUR 375,- - Diamond wheel for Bimetal nett price EUR 520,- - Bakelite wheel 13mm nett price EUR 75,- - Ceramic wheel 16mm nett price EUR 115,- - CBN grinding wheel nett price EUR 1.125,- - Spare Index Finger nett price EUR 70, - Index finger pin nett price EUR 20,- - Wheel dresser attachment nett price EUR 1.170,- - Wheel dresser diamond nett price EUR 100,- Rcsdpfx Aoyk Ib Ajbueh - Circular (HSS) saw grinding attachment nett price EUR 960,- - Frame saw grinding attachment nett price EUR 2.700,-/1meter - Coiler and uncoiler system for band saw manufacturers nett price EUR 5.800,- - Sealed packing nett price EUR 570,- - Attachment for double side saws nett price EUR 1.560,- - Pneumatic system for second indexing finger nett price EUR 1.140,- - CAM for GD tooth profile (WM) blades nett price EUR 330,-

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, power: 9 kW (12.24 HP), cutting width (max.): 450 mm, control type: CNC control, overall weight: 6,100 kg, Equipment: CE marking, documentation/manual, in production from 2023 / 1 shift only, 6200 hours band 6830 x 54x1,3 It is a highly efficient automatic,band-saw with multiple material feed. Bandsaw is designed for performance cutting of very hard and tough materials. This bandsaw is using extremely robust construction optimized with target to get maximum rigidity of machine and minimum vibrations. Stroke of frame and feeder stroke is realized by sharpened ball screws. Machine guarantees maximum possible power a precision. The machine is designed for vertical cuts. It is suitable for serial production in industrial premises. The machine is designed to saw steel materials, but also non-ferrous and light metals. However, we recommend consulting the manufacturer about this option. Conception of bandsaw is FCV= feeder-cut-main vice. Conception FCV enable cut material in automatic cycle with shortest possible end. Cutting parameters The shortest cutting mm 10 The smallest divisible diameter mm 30 The shortest rest during one cut mm 40 The shortest rest during automatic cut mm 90 Single step of material feed Min mm 3 Single step of material feed Max mm 730 Multiple feed mm 19999 Performance parameters Blade dimensions mm 6830x54x1,3 Blade speed m/min 20-150 Redpfx Abjykkqgsusch Blade drive kW 9 Pump of the cooling emulsion kW 0,16 Blade cleaning brush motor kW 0,12 Chip conveyor motor kW 0,12 Motor of the blade drive cooling kW 0,6 Frame ballscrew motor kW 0,5 Feeder ballscrew motor kW 1,5 Electric input Ps kW 17,7 Installed power Ps kW 12,8 Electrical connection 3 x 400V, 50Hz, TN-S

Condition: like new (used), Year of construction: 1977, functionality: fully functional, Sharpening machine VOLLMER LILIPUT SENIOR v, fully functional Rcjdpfx Ajyntk Dsbujh

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, Automatic sharpening machine for gang saws with wet grinding. Grinding wheel diameter: 250 mm. Tooth pitch: 25 mm. Arc tooth profile. Fully automatic sharpening operation. Wet grinding unit with pump and tank. Includes several new spare parts. Ready for demonstration. Rjdoyt I Hqopfx Abusch

Condition: not inspected (used), Year of construction: 2000, Brand: Walter Model: Woodtronic CNC 5D Year of manufacture: 2000 Carbide saw blade sharpening machine Condition: will be fully refurbished Used 7-axis CNC for face and back grinding - Diameter: 80 to 850 mm - Cross indexing table - SIEMENS MMC103 CNC control - All tooth geometries supported - Numerous options Pictures for reference only. Rcjdeyuutyspfx Abueh

Condition: used, functionality: fully functional, 1. CNE 1965 €1,300 2. CNE 1970 €1,400 3. CNE 1970 €1,400 4. CNG 1970 €1,100 5. CNS 1957 €800 6. CNL 1970 €800 Rsdpfx Abjwb Smlsuoch 7. CNG 1972 €1,100 8. CNE 1968 €1,400 9. CNS 1975 €1,600 10. CNE 1966 €1,300 11. CMS 1959 €800 12. CNS 1955 €800 13. CNE 1969 €1,400 14. CNE 1968 €1,400 15. CNH 1970 €2,400

Condition: good (used), Bratstvo sharpener Good condition. Rcodpfjv I Staex Abujh

Condition: not inspected (used), Brand: Walter Model: Woodtronic CNC5 with 2-pallet loader Year of manufacture: 2000 Sold as is. Used 8-axis CNC carbide saw blade grinding machine for face and back grinding, with linear loader (2 stations). Rcodexm T Huepfx Abush Diameter range: 80 to 850 mm - Standard measuring probe for recording and managing grinding parameters - SIEMENS MMC103 CNC control - All tooth geometries 2-pallet loader - Blade diameter up to 600 mm - Magnetic pins Options available on request Contractual photos

Condition: excellent (used), Bandsaw Manufacturer: Kolle Model: SR 400 Throat depth: 380 mm Cutting height: 300 mm Table size: 600 x 550 mm Table surface tilting and swiveling Width: 950 mm Rjdoxcx Txopfx Abujch Depth: 770 mm Height: 1860 mm

Condition: excellent (used), Year of construction: 2023, HYDRAULIC HIGH PERFORMANCE BAND SAW LINE Manufacturer: BEHRINGER Model: HBM 440 A Year: 2023 Condition: As new – only 82 operating hours Technical Specifications: - Cutting range (round): 440 mm - Cutting range (flat WxH): 440 x 440 mm - Minimum round/flat: 15 mm / 12 x 12 mm - Saw band dimensions: 6700 x 54 x 1.1 mm - Drive power: 11 kW - Cutting speed: 15 – 150 m/min - Material feed length per stroke: 600 mm - Material feed length, multiple stroke: Max. 5400 mm - Machine weight: 4600 kg - Dimensions (LxWxH): 4900 x 2650 x 2700 mm - Transport height: 2700 mm All information subject to change – errors excepted Rsdpfx Aboxw T Ugeusch Equipment & Features: - Coolant system 200 l - Full enclosure of the saw - Chip conveyor - BEHRINGER BT 65 TOUCH CONTROL + AUTO FEED CONTROL - Automatic bar change, max. 3000 kg Infeed: - Magazine KM 45 F-VR /600-6,200 mm - Round material: 50 – 440 mm - Flat: 40 x 20 – 400 x 400 mm or 440 x 430 mm - Bar length: 600 – 6200 mm - Driven roller conveyor: 6100 mm - Usable material storage: 3000 mm - Safety fence Outfeed: - Output side: metal belt, ejector plate, storage table Metal belt: - For transporting cut pieces, finished parts, and remnants - Width: 550 mm, length: 4200 mm - Guides on both sides up to 1000 mm length Side ejector for short bars (pusher) Storage table for cut material and stock: - Max. weight: 1000 kg - Length: 2400 mm - Usable depth: 1500 mm Subject to prior sale

Condition: not inspected (used), Year of construction: 2000, Brand: Walter Rjdpfoytn Syjx Abuoch Model: Woodtronic CNC6F Year of manufacture: 2000 Sold as-is, machine for production or resharpening of the sides of carbide-tipped saw blades. - Diameter range: 80 to 800 mm - SIEMENS 840DI CNC control - CNC axes Siemens Simodrive 611 - Automatic blade measurement and grinding wheel compensation - Variable spindle speed Images are for reference only.

Condition: used, Technical data: Grinding wheel diameter: 250 mm Manual feed Power supply: 380 V Total power: 1.1 kW Overall dimensions: Length: 1550 mm Width: 2000 mm Rsdpfxsymykbe Abuech Height: 2200 mm

Condition: used, functionality: fully functional, KNIFE SHARPENING MACHINE Rjdpfxsy Uk Sye Abusch

Condition: good (used), Circular Saw Blade Sharpening Machine Manufacturer: unknown Circular saw blade diameter: up to approx. 200 mm Grinding wheels: 160 x 15 mm Connection: kW Redpfsy Hgplsx Abuoch Saw dimensions: 320 x 340 x 500 mm Base cabinet dimensions: 410 x 410 x 590 mm Accessories/Equipment: Condition: good Weight: 100 kg Overall dimensions: 410 x 410 x 1,100 mm

Condition: ready for operation (used), Bandsaw – Horizontal KASTO BSM 260 / 400 - Maximum cutting height: 260 mm - Cutting range, flat/rectangular: 400 x 260 mm - Miter cutting device - Cutting speed, continuously adjustable: 17-110 m/min - Drive power: approx. 2.2 kW - Saw blade dimensions: 4310 x 27 x 0.9 mm Redpfxezifc Te Abujch - Coolant system - Roller support - Well-maintained, good overall condition Dimensions: L x W x H: 2.5 x 1.2 x 1.5 meters / 1300 kg Errors and omissions excepted.