Used Shear for sale (1,521)

Condition: new, Year of construction: 2026, overall weight: 9,000 kg, pressing force: 100 t, 2 in 1 = Press Brake + Shear bending length 3040 mm, Press capacity 100 to, Iodpfjd Hn Tajx Addsht Shear capacity L = 3200 mm x 6 mm, throat 200 mm, working high 640 / 1240 mm, Control CYBELE CybTouch 15, mot. gauge 700 mm, shadow cutting line, motor 10 KW dimensions 3700x1900x2400 mm, ca. 9000 kgs same machine available L = 2000 mm und L = 1400 mm

Year of construction: 2012, condition: good (used), VMI 2400L high shear mixing vessel 2012, Stainless, 2400l jacketed mixing vessel, top mounted agitation and scrape surface, central high shear mixing shaft, with centrifugal pump, 3Ph Iedpjrambysfx Addeht

Condition: used, Year of construction: 1981, sheet width - max. 2535 mm plate thickness 4.0 mm ST plate thickness 2.5 mm VA plate thickness 6.0 mm ALU number of strokes - loaded 20 Hub/min cutting angle 1.7 ° work height max. 900 mm total power requirement 8.5 kW weight of the machine ca. 3400 kg range L-W-H 2916 x 2250 x 1760 mm Machine from training workshop Good/well-maintained condition (!!) Features: - Robust electro-hydraulic guillotine shear “swing cut” - Electric motorized backgauge - Electric cutting length limiter - Electro-hydraulic cutting angle adjustment - Manual cutting gap adjustment - from the front - Front support table incl. recessed handles - 1x stable side stop, with scale and tilt cam - 3x stable front support arms - 1x freely movable foot switch - Front finger guard - EMERGENCY STOP button at the front - Operating instructions Ijdpjxabvqsfx Addeht * Special accessories included: - Pneumatic sheet metal holding device for thin sheet metal cuts

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, operating hours: 40 h, Guillotine shear used for a maximum of 40 hours only, maximum cutting capacity 3.5 mm sheet thickness, used exclusively for 1.5 mm coated sheets, hold-down opening 25 mm (can be reset to factory specification), stroke rate 56/min, light barrier, cutting angle 1.6°, rated power 4.0 kVA, weight 860 kg Iedpexal Uwjfx Addsht

Condition: good (used), functionality: fully functional, Year of construction: 2005, controller manufacturer: ELGO, controller model: P8721, - Very well-maintained hydraulic guillotine shear EHT - Max. cutting length: 6050 mm - Max. sheet thickness at 450N/mm²: 6 mm - Pneumatic sheet support lift - Backgauge with positioning control Iodpfx Aox Sau Ejddsht - Ready for demonstration under power - Weight approx. 24 t

Condition: excellent (used), functionality: fully functional, Year of construction: 1995, overall weight: 2,950 kg, total length: 1,980 mm, total width: 1,020 mm, total height: 2,060 mm, input voltage: 400 V, Equipment: documentation/manual, type plate available, Peddinghaus Peddimax 801 Very fine and well maintained ironworker with accessories. Capacities: Flatbar: 500 x 18 mm. 400 x 20 mm. 300 x 22 mm. Punching: Ø31 mm in 25 mm. Ø65 mm in 12 mm. Ø95 mm in 8.5 mm. Ø100 mm in 7.5 mm. See photos for other capacities. Motor: 400 V, 7.5 kW Transport can be arranged. ENGLISH: Peddinghaus Peddimax 801 Very fine and well maintained ironworker with accessories. Capacities: Flatbar: 500 x 18 mm. 400 x 20 mm. 300x22mm Ihodpfxjvw Dfae Addet Punching: Ø31mm in 25mm. Ø65mm in 12mm. Ø95mm in 8.5mm. Ø100mm in 7.5mm. See photos for more capacities. Motor: 400V 7.5kW Transport can be arranged.

Condition: good (used), Year of construction: 1975, working width: 3,100 mm, sheet thickness steel (max.): 10 mm, sheet thickness stainless steel (max.): 6 mm, back gauge: 700 mm, overall weight: 6,000 kg, total length: 3,400 mm, total width: 2,200 mm, total height: 1,800 mm, cutting length (max.): 3,100 mm, throat depth: 300 mm, Cutting length 3100 mm, cutting capacity 10 mm, motor 15 KW, working high 800 mm, back gauge 700 mm motorised, footpedal, 3 frontarms, fingerstop, pneumatic back support, cutting angle adjustable, dimension 3400x2200x1800 mm, weight ca. 6000 kgs Iedpfx Adevvwdyjdsht

Condition: good (used), functionality: fully functional, Year of construction: 1960, machine/vehicle number: G1 077, control type: manual, degree of automation: manual, actuation type: manual, controller manufacturer: peddinghaus, working width: 340 mm, cutting range flat at 90° (Y-axis): 120 mm, cutting range square steel at 90°: 50 mm, cutting range round steel at 45°: 55 mm, cutting range angle steel at 45° (Y-axis): 100 mm, sheet thickness (max.): 28 mm, working height: 800 mm, overall weight: 3,800 kg, total length: 1,000 mm, total width: 2,400 mm, total height: 2,400 mm, power: 7.5 kW (10.20 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, Equipment: documentation/manual, electrical contact length stop, foot remote control, well-functioning machine with many tools Ijdpfex H R Raex Addoht

Condition: reconditioned (used), Year of construction: 2015, functionality: fully functional, overall weight: 720 kg, total length: 320 mm, cutting length (max.): 300 mm, Alligator shears JMC 320 Fully overhauled, as new IMMEDIATELY available from stock IUT Beyeler AG, DE-06188 Landsberg. Financing and rental possible. We are looking for used alligator clippers! 12-month warranty The well established 320 Shear is a must for any yard and is now recognised as the industry standard for all shears of this type. One of our most popular shears, the McIntyre 320 Shear has maintained dominance in a demanding market due to its strength, quality and reliability The 320 is powerful enough to deal with a wide range of cutting and cleaning operations and is able to handle; automotive scrap, whole gear boxes, cylinder heads and blocks, oversized gate valves and of course all the usual non ferrous metal separations. The 320 can also be used to cut ferrous metals. Ihjdpjfxvklefx Addot Every shear comes with 1 year guarantee, spare parts can be delivered within 24 hours to whole europe.

Condition: excellent (used), functionality: fully functional, Year of construction: 1997, max. sheet thickness steel (450N/mm²): 6.5 mm max. cutting width: 3080 mm machine weight: 5600 kg Very good, ready-to-use condition. Isdjx Nalrspfx Addoht

Condition: new, sheet length: 3.200sheet thickness: 6,0total power requirements: 7,5weight approx.: 5.100messurements (LxWxH): 3.800 x 1.750 x 1.700 Our strong brand KK Kletzer                    Ihsdpfxenwt A Ao Addet Swing Beam Cutting Shear Vibration cut version Model SW has everything you need for cutting.  We have also raised the standard in the vibration cutting design and deliver ours as well  Plate shears with automatic cutting adjustment via the touchscreens Control ES21S without surcharge.  Technical specifications:  Sheet thickness: 6 mm  Cutting length: 3.100 mm Cutting angle: 1,5° Motor power: 7,5 kW  Strokes per minute 12 Length: 3.800 mm  Width: 1.750 mm  Height: 1.700 mm  Weight: 5.100 kg  • Stable swing cut design Cutting gap adjustment via the control - backgauge - kerf - Cutting length  • Ball screws for the back gauge • balls in the table We have many references!

Condition: excellent (used), functionality: fully functional, working width: 2,060 mm, sheet thickness (max.): 3 mm, back gauge adjustment: motor-driven, Equipment: emergency stop, safety light barrier, Vimercati mechanical guillotine shear. - Cutting width: 2060 mm - Sheet hold-down cylinders: 11 units - Maximum cutting thickness for steel with Rm 410 MPa: 3 mm Ihsdpfexdr R Tjx Addst - Maximum cutting thickness for steel with Rm 600 MPa: 2 mm - Pneumatic rear sheet support Machine is currently in operation and fully functional. Equipped with motorized back gauge with manual control and display showing cutting dimensions. Machine comes complete with added safety guards and an operation and maintenance manual.

Condition: good (used), Year of construction: 1983, Capacity 13 mm, cutting length 3050 mm, mot. back gauge 1000 mm, 4 frontarms 1000 mm with scale, cutting angle adjustment, cutting gap adjustment, motor 22 kw, foot pedal Ijdpsizkm Esfx Addjht

Condition: used, functionality: fully functional, Mechanical guillotine shear Manufacturer: Kramer, type 2050 x 3mm Technical data Brand: Kramer Working length: 2050 mm Sheet thickness: 3 mm steel Dimensions: L 2.5 x W 1.4 (plus support arms) x H 1.25 m Weight: approx. 2 t Equipment - Manual back gauge 500 mm - Support arms Iedpfxox Dbqvs Addoht All information without guarantee. A demonstration is possible at any time in our exhibition hall.

Condition: used, Year of construction: 1986, round bar steel - mm square edge steel - mm Ihjdpfxst D Nz Ae Addot L-beam 120 x 13 mm hole punhing press: pressure 60 t hole punching press: throat 510 mm hole punching press: capacity (dia. x thick.) Ø 27 in 17 mm shear: flat material 500 x 14 mm shear: flat material 400 x 16 mm shear: flat material 180 x 20 mm shear: flat material 120 x 21 mm shear: flat material 100 x 22 mm total power requirement 7,5 kW weight of the machine ca. 2,5 t dimensions of the machine ca. 1,8 x 0,9 x 1,8 m Hydraulic Section Shear - Combined

Condition: used, round bar steel 33 mm Isdpfxox Hp Ahj Addjht square edge steel 30 mm L-beam 60 x 8 mm hole diameter in sheet thickness 20 in 13 mm hole punhing press: pressure 35 t hole punching press: throat 320 mm hole punching press: max. length of stroke 24 mm hole punching press: capacity (dia. x thick.) 30 x 9 mm hole punching press: capacity (dia. x thick.) 20 x 13 mm total power requirement 1,5 kW weight of the machine ca. 1,7 t dimensions of the machine ca. 1,5 x 0,7 x 1,8 m Profile steel shear with: - Hole punch - Notcher - Foot switch - Machine light - Mounted on a trolley

Condition: used, Year of construction: 2008, sheet width 1530 mm plate thickness 4.0 mm Ihjdpfx Adoxyln Rodjt thickness at "Niro-steel" 2.0 mm no. of strokes max. 34 Hub/min cutting angle 2.70 Grad distance between columns 1540 mm work height max. 920 mm Control konv. voltage 400 V engine output 3.2 kW weight of the machine ca. 1115 kg. range L-W-H 2275 x 2220 x 1400 mm Features: - Robust motorized swing-arm guillotine shear - Break-resistant, torsion-resistant welded steel construction - Compact and easy-to-use machine design - Manual backgauge, adjustable from the rear * Stepless adjustment across the entire travel range - 1x hold-down bar - 1x freely movable foot switch - Front, extendable table extension - Rear safety device - Original operating instructions * Optional accessories included: - Sheet metal holding device for thin sheet metal blanks

Condition: good (used), Year of construction: 2001, Used HACO guillotine shear Model HSLX 4006 Capacity: 4050 x 6 mm Electrically adjustable back gauge, cutting angle, and blade gap Ihsdpfx Ajxwkcnoddet

Condition: ready for operation (used), Year of construction: 2004, control type: manual, actuation type: hydraulic, working width: 2,050 mm, stroke rate (min.): 18 1/min, stroke rate (max.): 18 1/min, sheet thickness steel (max.): 10 mm, sheet thickness stainless steel (max.): 6 mm, back gauge: 1,000 mm, power: 15 kW (20.39 HP), overall weight: 7,600 kg, total length: 2,400 mm, total width: 1,900 mm, total height: 2,000 mm, number of support arms: 2, Cutting length 2050 mm, cutting capacity 10 mm, motor 14,5 KW, working high 800 mm, back gauge 5-1000 mm motorised, 2 frontsupports, dimension 2700x1900x2000 mm, weight ca. 7600 kgs Iodpfxsxx Sm Do Addsht

Condition: excellent (used), Max. punching force: 600 kN Working pressure: 250 bar Angle steel 90°: 130x12 mm Hole diameter and thickness: 31x15 mm Weight: 1,930 kg Ijdpfoxwpkdjx Addjht

Condition: good (used), functionality: fully functional, LVD Plate Shear MV 31/3.5 – 3100 × 3.5 mm – Guillotine Shear Ihjdpfsxmvl Tex Addjt Manufacturer: LVD Company, Gullegem (Belgium) Model: MV 31/3.5 Max. cutting length: 3100 mm Max. sheet thickness (steel): 3.5 mm Drive system: hydraulic Backgauge: electric, 750 mm Machine weight: approx. 4,000 kg Dimensions: approx. 4000 × 1800 × 1600 mm LVD guillotine shear, Model MV 31/3.5, suitable for cutting steel sheets up to 3.5 mm thick over a width of 3,100 mm.

Year of construction: 2005, condition: excellent (used), Very good, hardly used Iedpfx Asxbft Njddeht

Condition: ready for operation (used), Year of construction: 2000, sheet width 1030 mm plate thickness 12.0 mm thickness at "Niro-steel" 8.0 mm blade length 1050 mm cutting angle 3.0 Grad no. of strokes ca. 10 Hub/min back stop - adjustable 500 mm Control konv. table height 900 mm operating pressure max. 280 bar oil volume 150 l engine output 11.0 kW weight 1900 kg range L-W-H 1550 x 1150 x 1600 mm Machine from a maintenance workshop (!) Furnishing: - heavy / robust electro-hydraulic sheet metal plate shears - Machine body in a closed design as an all-steel welded construction - Knife upper cheek slides in a long downward direction over the knife edge . protruding plastic guides - Cutting is done hydraulically via two hydraulic cylinders - The upper beam returns to its starting position in two ways . Spring batteries on the side stands - manual back gauge, adjustable from the rear * Adjustment by handwheel, with mm scale - manual cutting gap adjustment - 1x side stop, with mm scale and T-slot Isdpfx Adoxyafdedoht - Foot switch for lifting version - rear sheet metal slide - instruction manual * Machine link: ?machineno=1008-9325319

Condition: like new (used), functionality: fully functional, overall weight: 1,600 kg, first registration: 12/2024, Year of construction: 2023, Tree shear Woodcracker C 350 with tiltator and collecting unit. Adapter is Licufix SW 33 (if not needed, we can remove it). The machine is brand new, immediately available, and stored under cover. Isdpfx Aox Hrr Eeddsht

Condition: used, Used guillotine / shear for sale with non ferrous falling sheet support Used guillotine / shear for sale with non ferrous falling sheet support EDWARDS PEARSON D.D 2500mm x 3.5mm mechanical Guillotine for sale Direct drive guillotine / reliable sheet metal cutting machine Model: Truecut Control programmable / Front operated back gauge Ihodpfx Adofuam Hodot Datum Elgo control Back stop / back gauge Rapid blade gap adjustment Squaring arms Front sheet support arms Rear infra-red safety guarding Roving foot switch Year 1999 Can be seen working Manufactured in England Current blades are in good condition however new blades are available at extra cost Delivery and installation available at extra cost Also 2metre, 3metre dd guillotines for sale. Also Keetona Hydraulic guillotines for sale