Plate shear

Schröder MHSU

Condition: good (used), You are bidding here on a brand-name guillotine shear from the well-known German manufacturer Schröder. Device features: - Cuts up to 2.5 mm steel according to the nameplate - Working length: slightly over 2.5 m - Back gauge: 750 mm - Side/winkel stop - Sheet metal chute - See pictures: machine has not been refurbished - Foot pedal - Weight: see image - In proper condition You will receive an invoice with VAT shown separately. Forwarding/shipping can be arranged upon request. Free loading as shown in the pictures. Inspection and test run possible by appointment via phone. Payment in cash upon collection. If you have any other requests, please call me briefly – thank you. Collection should take place within 8 days after end of auction. Location: 97261 Güntersleben Item number: 250801 Gbjdpfew U Sryex Ag Hjk

Year of construction: 2001, condition: ready for operation (used), A Schechtl swing bending machine for sheet metal processing is available. Working length: 2040mm, opening height: 140mm, bending capacity: 3mm, bending speed: 50°/s, back gauge: 750mm. Machine dimensions X/Y/Z: approx. 3000mm/750mm/1250mm, weight: approx. 2750kg. On-site inspection is possible. Gbjdpfx Agex Hz Nts Hjk

Condition: excellent (used), You are bidding here on a branded guillotine shear from the well-known German manufacturer Schröder. Device Features: - Cuts steel (see nameplate) up to 3.5 mm – more for aluminum, etc. - Working length: just over 1 meter - Rear gauge: 500 mm - Side/angle gauge - Please refer to the pictures – the machine has not been refurbished - Foot pedal operation - Neat, well-maintained condition – little used; you can still see the Schröder emblem on the blade, which typically wears off over time from cutting You will receive an invoice in accordance with § 25a UStG – VAT is included in the invoice amount (differential taxation). I can arrange shipping if needed. Free loading as shown in the pictures. Inspection and testing are possible by telephone appointment. Gsdpfx Ajylvntog Hebk Payment in cash upon collection. If you need anything else, please feel free to call me – thank you. Collection should take place within 8 days after the auction ends. Location: 97261 Güntersleben Item number

Year of construction: 2007, condition: excellent (used), Description to follow! Gbjdpfeyrtv Uex Ag Hek

Year of construction: 2024, condition: new, Make: DURMA Type: MS 2504 year of manufacture: 2022 cutting length: 2550 mm sheet thickness: 4 mm Control: EZM9910 Operating hours: 0 Cutting angle: 1°30 Strokes per min.: 42 motor power: 7,5 kW backgauge range: 750 mm table width: 450 mm table height: 800 mm dimensions L/W/H: 3200x2300x1350 mm Weight: 3780 kg Standard equipment control unit EZM9910 backgauge range 750 mm programmable via control unit Jvcmke Plastic inserts for hold-down 1 side stop and 2 sheet support arms Finger guard Portable foot switch with emergency stop Spring loaded stop in T-slot of the support arms Ball screw Gbsdpfx Aod R Er Dsg Hek Ikh7877 Table plates with ball rollers Upper knife with 2 cutting edges Lower knife with 4 cutting edges CE marking Extended equipment Adjustable angular fence 0-180 The machine can be inspected and demonstrated at any time by appointment in our demonstration center in Staufenberg. Further machines are ready for demonstration at our facility in Staufenberg. We will be happy to provide you with further information on request.

Condition: good (used), Year of construction: 2006, sheet width 2530 mm plate thickness 2.50 mm thickness at "Niro-steel" 1.50 mm no. of strokes 34 Hub/min cutting angle 1.7 Grad table height 820 mm distance between columns 2620 mm Control konv. engine output 4.0 kW weight of the machine ca. 1350 kg. range L-W-H 3100 x 1980 x 1400 mm Features: - robust / motorized swing cut guillotine shears - unbreakable and torsion-free welded steel construction - compact and clear machine construction - manual backgauge, with analog display Godsym D Dxjpfx Ag Hebk * Adjustable from the rear * stepless adjustment over the entire travel range - all-steel blade, double-edged - 1x hold-down bar - 1x long side stop - 2x front support arms - Support/working table with 10 mm spaced grooves - Selector switch for single and continuous stroke - 1x freely movable foot switch - Operating instructions

Condition: used, Year of construction: 2008, sheet width 1530 mm plate thickness 4.0 mm thickness at "Niro-steel" 2.0 mm no. of strokes max. 34 Hub/min cutting angle 2.70 Grad distance between columns 1540 mm work height max. 920 mm Control konv. voltage 400 V engine output 3.2 kW weight of the machine ca. 1115 kg. range L-W-H 2275 x 2220 x 1400 mm Gbjdpfx Agoxyln Re Hjk Features: - Robust motorized swing-arm guillotine shear - Break-resistant, torsion-resistant welded steel construction - Compact and easy-to-use machine design - Manual backgauge, adjustable from the rear * Stepless adjustment across the entire travel range - 1x hold-down bar - 1x freely movable foot switch - Front, extendable table extension - Rear safety device - Original operating instructions * Optional accessories included: - Sheet metal holding device for thin sheet metal blanks

Condition: new, back gauge: 750 mm, - Capacity 1050 x 6 mm - NC electric back gauge - Foot switch - Rear photocell protection - Support arms - Cutting line illumination - Brake motor - Emergency stop Godpjgg N Hbofx Ag Hebk - Documentation - Weight 1800 kg - 400V

Condition: used, sheet width 4080 mm plate thickness 2.0 mm ST thickness at "Niro-steel" 0.8 mm Sheet thickness for ALU 2.5 mm cutting angle 1.3 Grad no. of strokes 34 Hub/min distance between columns 4310 mm back stop - adjustable 15.0 - 750 mm table height 820 mm Control ELGO engine output 9.0 kW weight of the machine ca. 3600 kg. range L-W-H 5250 x 2200 x 1400 mm Good condition (!!) Current new price approx. €70,000 Special price upon request The MHSU motor-driven guillotine shear is based on a torsion-free, rigid welded construction and a dynamic, quiet, and powerful gear motor. High static and dynamic rigidity is ensured by robustly dimensioned main components such as the cutter bar, support table, side supports,and the main drive unit. The motor- driven guillotine shear was developed forsheet metal and plastics processing. With these shears, you can effortlessly produce clean cuts in series. Features: - NC robust, motorized swing cut guillotine shears - with ELGO NC control unit * Digital position display of the backgauge * Adjustable from the front right * With target/actual value input * Continuous adjustment across the entire travel range * Limit switch protection - NC motorized material/backgauge - Shatter-proof, torsion-free welded steel construction - Compact and clearly arranged machine design - Support table with recessed grips - 1x hold-down bar - 1x side stop with T-slot and scale - 3x front support arms - 1x freely movable foot switch - Operating instructions Optional accessories included: Gsdpfx Agsxabc Rj Hsbk - Pneumatic sheet metal holding device for thin sheet metal blanks

Condition: good (used), Year of construction: 2001, machine/vehicle number: 122019, Offer 25507 Technical data: - Max. working width: 2520 mm - Max. material thickness: 2.0 mm - Cutting angle: 2.2° - Stroke rate up to: 25 strokes/min - Backgauge with ELGO position control up to 750 mm Gjdpfsx S Ed Esx Ag Hsbk - Table height: 850 mm - Front angle gauge: 2000 mm - 2 front support arms: 1000 mm - Pneumatically assisted sheet support - Electric foot pedal - Single or repeat stroke selectable - Rear safety guard - Drive: 400 V / 3 kW - Space requirements: approx. W 3450 x H 1150 x D 2200 mm - Weight: approx. 1600 kg

Condition: new, Year of construction: 2024, == Exhibition machine == ALZMETALL column drilling machine ALZSTAR 40 SV with coolant unit B (option 25) (consisting of separate tank (33l), pump with motor protection switch, complete fitting) and LED machine light Standard equipment: Mushroom pushbutton, reversing switch (for clockwise and anticlockwise rotation), motor protection switch Infinitely variable speed adjustment, digital speed display, feed overload protection, protection class IP54, connection plug Spindle protection with electrical fuse Technical data: Drilling capacity steel E335 (St 60) 40 mm Thread cutting: Steel E335 (St 60) M 24 Cast iron EN-GJL-200 (GG20) M 30 Short spindle MK 3 Spindle stroke 120 mm Projection 293 mm Column diameter 115 mm Machine table, usable support 514 x 360 mm T-slots, number x width x distance 2 x 14 x 224 mm Spindle-to-table distance min./max. 117/701 mm Gbjdpfx Aed Hy Eljg Hjk Feed rate 0.10 + 0.20 mm/rev Machine height without options approx. 1840 mm Net weight approx. 285 kg Drive stepless Motor 1500 / 3000 rpm Power 1.45 / 1.9 kW Spindle speed 160-2250 rpm

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, operating hours: 40 h, Guillotine shear used for a maximum of 40 hours only, maximum cutting capacity 3.5 mm sheet thickness, used exclusively for 1.5 mm coated sheets, hold-down opening 25 mm (can be reset to factory specification), stroke rate 56/min, light barrier, cutting angle 1.6°, rated power 4.0 kVA, weight 860 kg Gbjdpfxjxal Uwj Ag Hek