Used Sheet Metal Storage for sale (44,826)

Condition: as good as new (ex-display), functionality: fully functional, working width: 150 mm, Long sheet metal parts up to 150 mm wide, box sections, rectangular tubes and strips. Deburring, rounding and finish grinding. Codsr Iyg Aepfx Aflsaa Abrasive belt aggregate (K) TopBrush aggregate (2TB) Working width: 150 mm Ex showroom machine!

Condition: used, Pneumatic folding and edging machine FASTI Type 606 - 11 - 1.0 Csdpjdzqbljfx Afleaa Folding machine for pre-forming sheet metal seams For producing a seam bend Seam bending machine for thin sheet metal as an alternative to a press brake Serial no.: 9166002 Year of manufacture: 1991 Working length: 1100 mm Material thickness at 45 kg/mm²: 1 mm Compressed air requirement: 6 bar - pneumatic foot switch - roller adjustment via threaded clamping screws Required space (L x W x H): 1600 x 300 x 1050 mm Weight: approx. 250 kg Good condition The seam is the doubling over of the sheet metal edge (1x folded over) to increase the stiffness of the sheet. By folding over, a rounded edge is created, reducing the risk of injury from sharp sheet edges. Ideal for metalworking applications such as sheet metal furniture, cladding panels, or for the production of ventilation and silencer components.

Year of construction: 2020, condition: good (used), Remmert LaserFLEX | Fully automated loading and unloading – used - : Price ex-site: €145,000 (net) plus disassembly, etc.! Manufacturer: Remmert Type: LaserFlex Year of manufacture: approx. 2020 Format 3015 Load capacity: 1,000 kg 220 kg/m2 Maximum sheet dimensions: 3048 x 1524 mm Maximum sheet thickness: 25 mm SMART Control 4.0 Can be combined with a sheet storage unit (the sheet storage unit is not included in the sale) Former new price: €250,000 (net) Manufacturer's description: Equipped with two automation units – a loading unit and an unloading unit – the LaserFLEX enables the decoupled feeding of a laser cutting system. After the cutting process, a fork unit lifts the processed metal plate from the shuttle table. At the same time, a new sheet is transported from the connected storage area by a vacuum unit. As soon as the plate is positioned next to the laser system, the unloader loads the system with the workpiece. This process takes only one minute. With the LaserFLEX, downtimes of integrated laser cutting systems are virtually zero, as even lasers with high processing speeds are optimally supported. Special features: • Changeover times of approximately one minute (at 3015) • Highly automated production processes • Decoupling of loading and unloading of the laser cutting system • Manufacturer-independent integration of laser systems • Flexible storage design with tower storage or large-scale systems • Reduced downtime of the processing machine • Connection of multiple laser systems in a chain configuration • Integration into the existing storage and production landscape • Intuitive, graphical touch operation with visual status management • Modern industrial design Fast, flexible solution for automating laser systems Increased productivity in laser processing Fastest sheet metal changeover time on the market Smooth integration into the existing production environment Handling of any sheet metal blanks Effective supply and disposal of multiple laser systems Caedpfxowga E To Aflja Intuitive, graphical touch operation with visual status management Innovative, modern industrial design Condition: good Available from: immediately Location: 46419 Isselburg

Condition: excellent (used), Year of construction: 2007, Technical data: Material thickness: 0.5 – 20 mm Max. processing width: 1500 mm Number of units: 3 Infinitely variable feed: 0 – 4 m/min Grinding motor drive power: 4 x 3.0 kW Motor power: 12.6 kW Dimensions (L x W x H): approx. 2730 x 1500 x 1550 mm Weight: approx. 2.3 tons Application areas: Double-sided deburring of flame-cut, punched, laser-cut, autogenously cut parts, as well as waterjet-cut components Condition: Very good condition, due to little use Cajdpfxew U Dmis Aflea Operating hours: 35,000 Scope of delivery: Machine with LISSMAC extraction system

Year of construction: 2025, condition: new, lifter boy for loading sheet metal on laser machines easy operation ( vacuum pump are in the control unit) no cable by loading laser machine vacuum pomp work on battery and they are in operation unit 300, 600 and 800 kg save operation Caedpfx Asm E Im Esfloa 1 spare Battery include battery loader include monting manual. CE complete pack in wooden transport box we can deliver till 6 meter long scheetmetal.

Condition: good (used), beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel tongs, plate gripper, lifting claw, lifting clamp Casdpfjvgv Apjx Afloa -Manufacturer: Stahl Süssen, Sheet metal clamp: Lifting clamp type SGK -Clamping range: 0-20 mm -Load capacity: 1000 kg -Dimensions: 190/75/H285 mm -Weight: 6.9 kg

Condition: used, Hydr. swing cut guillotine shears HERA type HSS III No. 598 Year of manufacture 1986 Cutting length 3100 mm Cutting thickness 3 mm Stand projection 200 mm Blade strokes 25 strokes/min. Mains connection 380 Volt, 50 Hz Motor power 3 kW - Motorized adjustable backgauge 1070 mm - Actual value digital display for the backgauge - Cutting gap adjustment - Cutting length adjustment - Front side stop left 1000 mm - 4 sheet metal support arms 1000 mm Caedpfxsq A I Upe Aflea - el. foot switch Space requirement without sheet support arms L x W x H 3630 x 2200 x 1600 mm Weight approx. 4000 kg good condition

Condition: used, Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, plate gripper, lifting claw, lifting clamp, lifting clamp, crane clamp, roller clamp -Manufacturer: VEB TAKRAF, roller clamp type WSI -Clamp range: 35-70mm -Load capacity: 2000 kg -Dimensions: 620/210/235 mm Caodpfxsir E Tho Afloa -Weight: 21 kg

Condition: used, Strip Processing Line, Decoiler and Straightening Machine Year of manufacture: 1991 Strip width: 50 to 450 mm Sheet thickness with straightener inactive: 6 mm Sheet thickness with straightener active: 2 mm - Very well equipped with feed-in aids Required floor space for the entire line (L x W): approx. 7000 x 3000 mm Total weight: approx. 11 tons Good condition Straightening Machine HMS Type RS 47-04/1, Machine No. Strip width, nominal: 400 mm Strip width, max. pass-through: max. 455 mm Strip thickness at 400 mm width: max. 1.5 mm (steel) Strip thickness at 400 mm width: max. 2 mm (copper) Speed: max. 40 m/min Number of straightening rolls: 7 Straightening roll diameter: Ø 40 mm Number of pinch rolls: 2 Pinch roll diameter: Ø 80 mm Entry height/pass-through height: 1500 mm - Straightening rolls hardened, ground and hard-chromed, with central support - Pinch rolls hardened, ground and hard-chromed, with hydraulic lifting - Manual straightening roll adjustment - Feed assist with hydraulically extendable tongue and hydraulically adjustable deflection pulley - Adjustable side strip guides - All straightening rolls driven via distribution gearbox and cardan shafts - Both pinch rolls driven via gearbox with cardan shafts - Frequency-controlled drive via geared motors - Straightener opening stroke 250 mm for cleaning or for processing thicker material, lifting by trapezoidal-thread spindle - Ultrasonic loop control Transport dimensions (L x W x H): 3600 x 2200 x 2200 mm Net weight: approx. 4 tons Decoiler HMS Type BA 1.5-06/80, Machine No. Coil weight: max. 8000 kg Outer coil diameter: max. 1600 mm (with load carriage) Outer coil diameter: max. 2000 mm (without load carriage) Diameter of coil turntable: Ø 1700 mm Coil inner diameter, expansion range: 460–520 mm Coil width, nominal: max. 630 mm Expansion jaw width: 750 mm Height of decoiler drum above base plate: 1500 mm - Decoiler drum driven by hydraulic motor and gear - Pneumatic overrun brake on the decoiler drum (TWINFLEX) - Hydraulic expansion of the decoiler drum, centrally via wedge slider system - Hydraulic pressure arm with hydraulically driven double pendulum roller - Coil loading carriage with 12-ton lifting capacity and 300 mm stroke - Decoiler on elevated travel frame with motorized cross travel drive Transport dimensions (L x W x H): 3500 x 1900 x 2500 mm Net weight: approx. 5 tons Central Hydraulic Power Unit (adjacent) Tank capacity: 350 liters Drive power: 18.5 kW - Drive motor with 2x REXROTH tandem pumps - Oil cooler as air heat exchanger with fan motor Transport dimensions (L x W x H): 1600 x 850 x 1450 mm Net weight: approx. 800 kg Caodpfjif Sg Sex Afloa Electrical Cabinet (adjacent) - All cable connections via Harting connectors Transport dimensions (L x W x H): 2800 x 500 x 2250 mm Net weight: approx. 800 kg

Condition: used, Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel tongs, plate gripper, lifting claw, lifting clamp -Manufacturer: ip, safety lifting clamp type IP 10 with swiveling support ring -Clamping range: 0 - 50 mm Cedpekm Rm Ujfx Afloaa -Load capacity: 6 t -Number: 8x terminals available -Price per piece -Dimensions: 300/100/H430 mm -Weight: 25 kg

Condition: used, Hydraulic Plate Shear LVD Type HST-C 31 / 6 Machine No. 21348 Year of manufacture: 1994 Cutting length: 3,100 mm Cutting thickness: 6.35 mm Backgauge: 770 mm Working height: 950 mm Hydraulic sheet hold-downs: 17 units Hydraulic tank capacity: 150 liters Motor power: 7.5 kW Power connection: 400 Volt, 50 Hz, 9.5 kW, 19 Amp. - Motorized backgauge with digital actual position display ELGO - Backgauge adjustment via push button – rapid in both directions and fine adjustment by jogging in the minus direction only - Sheet lifting device below the backgauge with pneumatic lifting cylinder Cjdpfx Afotvb Iueljaa - Continuously adjustable blade gap from 0.1 mm via handwheel with analog display - Cutting angle adjustment in 5 steps from 1.5° to 3.5°, electrically pre-selectable - Left side angle stop 1,500 mm - 2 table extensions as sheet supports - Electric foot switch - Comprehensive operating manual Space requirements without front table extension (L x W x H): 4,150 x 1,850 x 1,900 mm Space requirements with front table extension (L x W x H): 4,150 x 2,850 x 1,900 mm Weight: 5.5 tons Good condition Very good cutting results, including with thin sheet metal

Condition: used, Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel tongs, plate gripper, lifting claw, lifting clamp -Manufacturer: ip, safety lifting clamp type IPSUNZ 6t with swiveling support ring Casdpfekm Rn Iox Aflsa -Clamp range: 32-64 mm -Load capacity: 6 t -Number: 4x clamps available -Price per piece -Dimensions: 310/100/H420 mm -Weight: 24 kg/pc.

Condition: used, Swivel bending machine KRAMER type A-Maut. II 1000 No. 48 287 Year of construction 1990 effective length 1060 mm max. sheet thickness 3.75 mm Stroke of upper beam 180 mm Adjustability of the folding beam 60 mm Backgauge 480 mm Drive power of folding beam drive 4 kW Drive power upper beam drive 1.5 kW Mains connection 400 Volt, 50 Hz Cedpfefnabyjx Afljaa - Manual and semi-automatic control - Angle adjustment via angle preselection disk - one-piece pointing rail 135° - backgauge with hand crank adjustment and simple measuring scale - Continuous fence rail - Electric foot switch, 3-position Space requirement L x W x H 2200 x 1350 x 1500 mm Weight approx. 2.3 tons good condition

Condition: used, Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel tongs, plate gripper, lifting claw, lifting clamp Casdpfx Aolu N Edefloa -Manufacturer: ip, safety lifting clamp type IP N with swiveling support ring -Clamp range: 0-40 mm -Load capacity: 6 t -Number: 6x clamps available -Price per piece -Dimensions: 280/100/H460 mm -Weight: 26 kg/pc.

Condition: used, Hand - swing bending machine KRAMER type AMS 650 x 1,5 Codpfx Asdzqaaoflsaa Hand swivel bending machine, press brake year of construction approx. 1985 working length 650 mm sheet thickness at 40 kg/mm2 1,5 mm upper beam opening approx. 60 mm bending beam adjustment ca- 0-25 mm bending angle 0-180 - Upper beam adjustment via hand crank - pre-screw rail for the bending beam - one-piece sharpening rail 135° space requirement L x W x H 1200 x 600 x 1100 mm weight 160 kg good condition

Condition: used, Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel gripper, plate gripper -Sheet metal claw: clamping range up to 30 mm -Load capacity: kg -Dimensions: 250/100 / H460 mm -Weight: 20 kg Cjdpegtn Dxofx Aflsaa

Condition: used, Guillotine shear, sheet metal guillotine DIGEP type OL 3 Workshop-refurbished guillotine shear Serial no.: 1312 Year of manufacture: 1977 Cutting length: 1250 mm (nominal cutting length) Max. cutting length: 1300 mm Cutting thickness at 450 N/mm²: 3 mm Cajdpfx Ajlpkcnsfloa Simple backgauge: 500 mm Frame depth: 200 mm Cutting angle: 2° Strokes at full cutting length: max. 50 strokes/min Working height: 860 mm Motor power: 2.2 kW Main connection: 380 Volt, 50 Hz - LED cutting area lighting - Simple backgauge with manual adjustment - Mechanical foot switch - Front angular stop left - 1 piece front sheet support 300 mm Dimensions (L x W x H): 1660 x 1350 x 1200 mm Weight: 1600 kg Good condition

Condition: used, Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper Cjdpfxsdg Snis Afleaa -Sheet metal claws -Span width: 0 to 25 mm -Load capacity: 2000 kg -Number: 1x terminals available -Weight: 14 kg

Condition: used, Guillotine shear LOTZE Type HSS 20 / 7 Cutting length 2050 mm Cutting thickness 7 mm with simple back gauge Csdpfolmry Eex Afljaa

Condition: used, Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Span width: 0 to 100 mm -Load capacity: 1250 kg -Number: 4x sheet metal clamps available Caedpfjd I Sziex Afloa -Price: per piece -Dimensions: 300/310/H80 mm -Weight: 13 kg

Condition: used, Hand lever shears VEB Scherenbau Nossen type ScDH10 Blade length: 180 mm Sheet thickness: max. 10 mm Flat material: 50x15 mm square solid material: 22x22 mm Round steel: 24 mm Angle steel: 60x7mm T-steel: 60x7mm Codpouqrabefx Afljaa on mobile base frame Own weight: approx. 150 kg

Condition: used, Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper Codpfxsb A Rwxs Aflsaa -Sheet metal claws -Span width: 0 to 40 mm -Load capacity: 9000 kg -Number: 1x terminals available -Weight: 28 kg

Condition: used, Swing cut guillotine shears KÖLLSCHEN type BSK 2000/2 No. 69 1307 Year of manufacture 1969 Cutting length 2000 mm Cutting thickness 2 mm Stand projection 90 mm Working height 920 mm Mains connection 380 Volt, 50 Hz Motor power 4 kW - Drive via geared motor with brake and crankshaft - Mechanical sheet holder - Manual back gauge 500 mm - fence adjustment via 2 handwheels, at the rear on the back gauge guide with scale - front side stop left 720 mm - electric foot switch - manual central lubrication - Control cabinet on the machine - Machine stands on 4 swinging elements, approx. 100 mm height Space requirement L x W x H 2800 x 1700 x 1450 mm weight 2300 kg Caodpfxsifu Ane Aflja good condition

Condition: used, Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper Cjdob A Hc Tepfx Afleaa -Sheet metal claws -Span width: 0 to 60 mm -Load capacity: 3000 kg -Number: 8x terminals available -Price: per piece -Weight: 16 kg/piece

Condition: used, CNC press brake FASTI type 904-125/30 serial no. 95-904-5775 year of construction 1995 Pressure capacity 125 ton. Working length 3050 mm Stroke approx. 335 mm Stand projection 300 mm Clearance between the side uprights 2550 mm Tool installation height max. 465 mm (opening width between the tool holders) Table width 90 mm (the clamping system is mounted on the table) Cjdpfshmmfkjx Aflsaa Table height above floor 875 mm (910 mm with clamping system) Backgauge X-axis 500 mm Backgauge R-axis 115 mm Backgauge Z-axis approx. 1950 mm Lowering speed Y rapid traverse 90 mm/s Lowering speed Y-operation 8.9 mm/s Return stroke speed Y-retraction 75 mm/s Oil filling approx. 160 liters Motor power 18.5 kW Mains connection 400 Volt, 50 Hz, 20 Amp. - 7-axis CNC control DELEM type DA 58 with LCD screen - 1 axis for back gauge - stop depth (X-axis) - 2 axes for back gauge - fence height (finger R1 + finger R2) - 2 axes for back gauge - stop finger, laterally movable (finger Z1 + finger Z2) - 2 axes for press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and 2-hand control panel or 2-hand control panel only - Hydraulic tool clamping for the TRUMPF upper tool system, with 20 mm clamping groove - Hydraulic tool clamping for the lower tool with 13 mm table groove, depth 21 mm (tool pin 13 x 20 mm) - FIESSLER safety light barrier, type AKAS - 2 material support arms at the front, manually movable to the side and height-adjustable - Electrical diagram, hydraulic diagram, user manual for control available - Control cabinet on the machine - without tools Space requirement L x W x H 5000 x 2500 x 3050 mm Transport dimensions L x W x H 5200 x 1900 x 2950 mm Weight 8.5 tons. Good condition