Used Shock Absorber for sale (861)

Condition: excellent (used), Here we offer shock test chamber. Temperature shock test chamber water cooled Two-chamber design Warm chamber: Temperature control of the warm chamber ranges from +50°C to +220°C Temperature deviation temporally in useful chamber center ± 1 K Temperature deviation spatially ± 2 K Temperature change rate heating 11 K/min cold chamber: the cold chamber from -65°C to +70°C Temperature deviation temporally in useful space center ± 1 K temperature deviation spatially ± 2 K Temperature change rate heating 2 K/min cooling 3 K/min Test chamber volume 125 liters Temperature range hot chamber +50°C to +220°C Temperature range cold chamber -80°C to +70°C Fodei Az Egspfx Ag Rsga Test chamber dimensions width 470mm depth 650mm height 410mm Outer dimensions width 930mm depth 2115mm height 1970+mm Rated power 10 kW Rated current 25 A Voltage: 3/N/PE AC 400V +6/-10% 50Hz Refrigerant R404A / R23 Operating hours: 27.903 hrs. Weight: 1000 kg For you as a buyer, the following information for your safety! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Type: HT 7012 S2 Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Espec Type: TSA-202E-W Temperature Shock Chamber, Water-Cooled Cold Chamber: -55°C to 0°C Hot Chamber: +50°C to 200°C System: Two-zone test with damper control Temperature fluctuation ±0.5°C Hot Chamber: Temperature heating time: Ambient temperature (20°C) to +200°C within 15 minutes. Cold Chamber: Temperature reduction time: Ambient temperature (20°C) (20°C) to -55°C within 35 minutes. Temperature recovery: within 5 minutes. Internal dimensions (W x H x D mm): 650 x 460 x 670 External dimensions (W x H x D mm): 1550 x 1900 x 1670 Approx. 200 liters Power supply: 400 V AC 50Hz: 65 A Refrigerant: R404A 5 kg R23 2.0 kg Weight: Approx. 1200 kg For your safety as a buyer, please note the following: The following steps are carried out in advance on our chambers: 1. Functional testing and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful testing, the chambers are subjected to a documented test run. Fgedpfx Agswc R A Ij Roa Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical specifications, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: good (used), Espec Type: TSD-100 100 liters of usable space for larger test specimens up to 30 kg. Complies with all current international standards. Water-cooled Temperature range hot chamber: +60 °C to +200 °C Temperature range cold chamber: 0 °C to -70 °C Test chamber dimensions: 710 x 345 x 410 (W x H x D) in mm External dimensions: 1100 x 1885 x 1965 (W x H x D) in mm Water-cooled refrigeration unit Program control via touch panel Automatic defrosting Overtemperature protection Operating hours counter Mobile version 2 stainless steel test baskets Fgjdpfeugl H Sex Ag Rsa Cable gland Ø 100 mm Refrigerant: R404A 1kg R23 Power supply: 400V 3Ph 50Hz Max. Current consumption: 32A Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Here we offer a temperature shock test chamber. with 100 liters of usable space for larger test specimens up to 30 kg. Compliant with all current international standards. Water cooled Temperature range hot chamber: +60 °C to +200 °C Temperature range cold chamber: -70 °C to 0 °C Test chamber dimensions: 710 x 345 x 410 (W x H x D) in mm External dimensions: 1100 x 1885 x 1965 (W x H x D) in mm Water-cooled refrigeration unit Program control via touch panel Automatic defrost Fgsdsn Smtmspfx Ag Rja Overtemperature protection Operating hours counter Mobile version 2 test material baskets made of stainless steel Cable gland Ø 100 mm Refrigerant: 3 kg R404A 1kg R23 Power supply: 400V 3Ph 50Hz Max. Current consumption: 32A Type: TSD-100 Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), White temperature shock test chamber Here we offer a temperature shock test chamber. Weiss Temperature Shock Test Cabinet Water Cooled Specification: Temperature range hot chamber +60°C ... +220°C Temperature range cold chamber -10°C ... -80°C Change hot/cold chamber 10 sec. Temperature constancy ±1 K Dimensions and further data: External dimensions: Height 1990 mm Width ( without and with door hinge ) without....approx. 1820 mm with....approx. 1850 mm Depth ( without and with test room door ) without....ca. 900 mm with....ca. 1155 mm Dimensions of the lifting basket ( test chamber ) height 450 mm, width 500 mm, depth 600 mm volume 130 liters Test space load max. 20 kg Test chamber floor load max. 20 kg Cooling water pressure min. 2 ... max. 6 bar Max. Backup fuse 35 A (plug 32 A CEE) Sound pressure level, 1 m in front of unit approx. 65 dB(A) Cooling cascade water cooled Connected load: 3/N/PE/AC 400V ±10% 50Hz /14,0 kW nominal current 26,0 A Refrigerant R 404A / R23 Weight: approx. 950 kg Type: TS 130 Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you. Fsdom Ak H Hepfx Ag Rsga

Condition: excellent (used), White temperature shock test chamber Here we offer a temperature shock test chamber. Weiss Temperature Shock Test Cabinet Water Cooled Specification: Temperature range hot chamber +60°C ... +220°C Temperature range cold chamber -10°C ... -80°C Fgjdpfx Aslmkn Tjg Rsa Change hot/cold chamber 10 s Temperature constancy ±1 K Dimensions and other data: External dimensions: Height 1990 mm Width ( without and with door hinge ) without....approx. 1820 mm with....approx. 1850 mm Depth ( without and with test room door ) without....ca. 900 mm with....ca. 1155 mm Dimensions of the lifting basket ( test chamber ) height 450 mm, width 500 mm, depth 600 mm volume 130 liters Test space load max. 20 kg Test chamber floor load max. 20 kg Cooling water pressure min. 2 ... max. 6 bar Max. Backup fuse 35 A (plug 32 A CEE) Sound pressure level, 1 m in front of unit approx. 65 dB(A) Cooling cascade water cooled Connected load: 3/N/PE/AC 400V ±10% 50Hz /18.7 kW nominal current 26,0 A Refrigerant R 404A / R23 Weight: approx. 950 kg Type: TS 130 Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Here we offer Vötsch shock test chamber. Temperature shock test chamber water cooled Two-chamber design Warm chamber: The temperature control of the warm chamber ranges from +50°C to +220°C Temperature deviation in time in the center of the chamber ± 1 K Temperature deviation spatially ± 2 K Temperature change rate heating 11 K/min cold chamber: the cold chamber from -80°C to +70°C Temperature deviation temporally in useful space center ± 1 K temperature deviation spatially ± 2 K Temperature change rate heating 2 K/min cooling 3 K/min Test chamber volume 125 liters Temperature range hot chamber +50°C to +220°C Temperature range cold chamber -80°C to +70°C Test chamber dimensions width 470mm depth 650mm height 410mm Fjdpfxsigg Hno Ag Rega Outer dimensions width 930mm depth 2115mm height 1970+mm Feedthrough ∅ 67mm Rated power 10 kW Rated current 25 A Voltage: 3/N/PE AC 400V +6/-10% 50Hz Refrigerant R404A / R23 Weight: 1000 kg For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Type: VT 7012 S2 Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: used, White Type: TS 130 Temperature shock test chamber water-cooled Specification: Fodpfx Agevwckhj Rjga Temperature range hot chamber +60°C … +220°C Temperature range cold chamber -10°C … -80°C Switch between hot and cold chambers 10 sec. Temperature stability ±1 K Dimensions and other data: External dimensions: Height 1990 mm Width (without and with door hinge) without....approx. 1820 mm with....approx. 1850 mm Depth (without and with test chamber door) without....approx. 900 mm with....approx. 1155 mm Dimensions of the lifting basket (test room) height 450 mm, width 500 mm, depth 600 mm Volume 130 liters Test room load max. 20 kg Test room floor load max. 20 kg Cooling water pressure min. 2 ... max. 6 bar Max. fuse 35 A (plug 32 A CEE) Sound pressure level, 1 m in front of the device approx. 65 dB(A) Water-cooled cooling cascade Connection values: 3/N/PE/AC 400V ±10% 50Hz /14.0 kW Rated current 26.0 A Refrigerant R 404A / R23 Weight: approx. 950 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) More We will be happy to answer any questions you may have over the phone.

Condition: used, Huda Technology HUD-G809 Drop Shock Test System The system is also suitable for testing batteries. Fgodpjxmiilofx Ag Rsa Max load: 100 kg Table size: 500 mm x 600 mm Peak impact acceleration range (half-sine wave): 150 - 6000 m/s² Pulse duration (half-sine wave): 0.5 - 30 ms If the pulse duration is less than or equal to 3 ms, the tolerance for peak acceleration is ±20%; the tolerance for pulse duration is ±15%. If the pulse duration is greater than 3 ms, the tolerance for the waveform should comply with the range specified in the standard. Velocity tolerance: ±15% Hydraulic brake prevents secondary impact. Overall table dimensions: 1000 x 750 x 2450 mm Weight: 3600 kg Power consumption: 5.5 KVA 380V ±10% AC 50 Hz Condition: used (We reserve the right to make changes and correct typing errors in technical data and specifications!) If you have any other questions, we would be happy to answer them by phone.

Condition: excellent (used), RS. simulators Type: ST2K320/45 K Water-cooled shock test system Temperatures in the upper test chamber Temperature range: + 40 °C to + 180 °C Time deviation: ± 0.8 K according to DIN 50011 with empty test chamber Temperatures in the lower test chamber Temperature range: - 40 °C to +100 °C Time deviation: ± 0.8 K according to DIN 50011 with empty test chamber Humidity in the upper test room Climatic temperature range: + 40 °C to +90 °C Humidity range: 20 % to 98 % (± 2 to 5 %) relative humidity Humidity: 25% to 75% relative humidity Working climate range: Temperature: + 12 °C to + 30 °C Humidity: 25 % to 75 % relative humidity Fgedpfxotrf Uls Ag Rea Dimensions: Width 900 mm Height 2000 mm Depth 2300 mm Test room dimensions: Width 470 mm Depth 700 mm Height 440 mm Electrical power supply: Total power: 13 KVA Current consumption: 25 A Voltage: 3x400V/N/PE / 50Hz Refrigerant: R404A/2.5 kg Chamber: approx. 950 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Weiss Technik TS 60 Thermal Shock Test Chamber / 60 L, –71…+220 °C Water-cooled Item description: For sale is a Weiss Technik TS 60 Thermal Shock Test Chamber. The chamber is ideally suited for rapid temperature cycling tests (e.g., per IEC, MIL-STD, JEDEC) and has been well maintained. Volume & internal dimensions: Test volume: 60 liters Internal basket/test room dimensions (W × D × H): approx. 380 × 430 × 370 mm External dimensions (W × D × H): 895 × 1970 × 1895 mm Temperature ranges & cycling: Hot chamber: +50 °C to +220 °C Cold chamber: –72 °C to +70 °C Transfer time (basket between both zones): < 10 seconds Heating rate / speed up to 17 °C/min Cooling rate / speed up to 3.7 °C/min In single mode (cold zone only), heating rate: approx. 3.2 °C/min Temperature deviation & uniformity: Temporal deviation (temperature control over time): ± 0.3 to ± 1.0 °C Load / permissible weight & lifting system: Basket/lifting system load capacity: 20 kg maximum load Transfer basket secured by safety grilles on all sides Additional features & equipment: Noise level: approx. 58 dB(A) in operation Control: Touchscreen, RS-232 / USB / Ethernet interfaces Electrical connection: 3/N/PE AC 400 V ±10% 50 Hz Rated power: approx. 8.5 kW Rated current: approx. 25 A On-site protection: 32 A Refrigerants: R-404A / R-23 Weight: 800 kg Important safety information for buyers! Fgsdpfxexr A R To Ag Rsa The following steps are carried out on our offered chambers prior to sale: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors reserved!) For further questions, feel free to contact us by phone.

Condition: excellent (used), Vötsch Model: VT 7012 S2 Water-cooled Two-chamber configuration Hot chamber: Temperature range of hot chamber: +50°C to +220°C Temporal temperature deviation at the center of useful space: ±1 K Spatial temperature deviation: ±2 K Temperature change rate: Heating: 11 K/min Cold chamber: Temperature range of cold chamber: -74.5°C to +70°C Temporal temperature deviation at the center of useful space: ±1 K Spatial temperature deviation: ±2 K Temperature change rate: Heating: 2 K/min Cooling: 3 K/min Test chamber volume: 125 liters Temperature range hot chamber: +50°C to +220°C Temperature range cold chamber: -80°C to +70°C Test chamber dimensions: width 470 mm, depth 650 mm, height 410 mm External dimensions: width 930 mm, depth 2115 mm, height 1970+ mm Port diameter: 67 mm Voltage: 3/N/PE AC 400V +6/-10% 50Hz Rated power: 10 kW Rated current: 25 A Refrigerants: R-452A / R-23 Weight: 1000 kg Important safety information for buyers: Fgodjx Hhfhepfx Ag Rea The following actions are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Recharging with legally compliant refrigerant 3. Leak test with certificate 4. After a successful check, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Subject to changes and errors in technical data and specifications!) We are happy to answer further questions by phone.

Condition: not inspected (used), Year of construction: 2007, functionality: unexamined, machine/vehicle number: CS27069, CS Clean Systems Cleansorb CS065SC Fedpfx Aswm Il Uog Roga Shows slight signs of wear (see pictures)

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, For sale are 10 high-quality aluminum tent halls from 2016, model LX1200.320.T.100.001_E, which are characterized by their exceptional stability, durability, and flexibility. These modern tent halls are the perfect solution for a variety of applications, including storage areas, workshops, showrooms, event tents, and much more. Fgjdpfxov N Txgj Ag Rea PRODUCT FEATURES: Model: LX.1500.520E.S100.P252 Double-skin PVC thermal tarpaulin Frame material: Robust aluminum – corrosion-resistant and particularly lightweight, ideal for permanent or temporary structures Dimensions: Length: 50 m Width: 12 m Ridge height: 5.20 m Inner clearance: 3.25 m from base plate Trafter spacing: 5 m Sandwich roof thickness: 10 cm roof / 6.5 cm walls Structural analysis available Tent testing can be re-performed Roof tarpaulins have been cleaned once Tents are dismantled and picked Roof material: High-quality double-skin thermal tarpaulin, UV-resistant PVC tarpaulin, water-repellent, weather-resistant, and durable Floor: Optional floor structure or anchoring as required Color: Standard in White Weather resistance: High wind and snow load tolerance – ideal for year-round use Certifications: Meets all relevant standards for wind and snow loads, certified according to European standards Snow load zone 1-3 SPECIAL BENEFITS: Lightweight: The aluminum frame makes the tent hall particularly light and easy to transport and set up without compromising on stability. Flexibility: Assembly is quick and easy – ideal for both temporary and permanent use. Versatility: Suitable for many applications such as event tents, warehouses, workshops, exhibitions, retail spaces, or as emergency shelter. Price upon request – We will provide you with a customized quote. Conclusion: The aluminum tent hall LX1200.320.T.100.001_E is the ideal solution for anyone needing stable, cost-effective, and durable accommodation. Their versatility and ease of use make them an excellent choice for companies seeking fast and flexible solutions. Visit and further information: You are welcome to visit the tent halls or request further technical details.

Condition: used, functionality: fully functional, mileage: 348,568 km, power: 338 kW (459.55 HP), first registration: 05/2023, fuel type: diesel, overall weight: 8,523 kg, axle configuration: 4x2, wheelbase: 375 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2023, number of cylinders: 6, cubic capacity: 13,000 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Adaptive Cruise Control. Cabin: CR (air comfort suspension). Tilting: mechanical. Batteries 210 Ah (rear position). Alternator charge 150 A. Engine DC13 175 460 hp EURO 6. Gearbox: G33CM. Advanced Emergency Braking AEB, Auxiliary brakes, Exhaust brake control Side Collision Avoidance Support Driver attention support Driver comfort Air-conditioning system, automatic Seat with armrest adjustable shock absorber driver side Seat with armrest adjustable shock absorber passenger side Bed upper lower and upper width 800mm. Night heater WTA cab heater 3kW. Storage rear lower, driver side - refrigerator. Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Front tyres 315/70R22.5. Rear tyres 315/70R22.5. Fifth wheel Jost JSK37C-Z, height 150 mm *STGO with axle/GVW design weights only. Fuel volume left side 825 dm3. Fuel volume right side 395 dm3. AdBlue tank capacity 150 l, right Fuel tank material aluminium. Speed limitation legal 90 km/h. Technology Fsdpfxeykzuco Ag Roga Infotainment system 2 DIN with 5 inch screen (Advanced) FMS, Fleet Management System preparation Gateway Exterior Headlamps LED (automatic). Daytime running light function LED and position lamps. Fog lamp front type LED 3 diodes Roof air deflector adjustable Door window air deflector

Condition: used, functionality: fully functional, mileage: 402,057 km, power: 338 kW (459.55 HP), first registration: 06/2023, fuel type: diesel, overall weight: 8,523 kg, axle configuration: 4x2, wheelbase: 375 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2023, number of cylinders: 6, cubic capacity: 13,000 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Adaptive Cruise Control. Cabin: CR (air comfort suspension). Tilting: mechanical. Batteries 210 Ah (rear position). Alternator charge 150 A. Engine DC13 175 460 hp EURO 6. Gearbox: G33CM. Advanced Emergency Braking AEB, Auxiliary brakes, Exhaust brake control Side Collision Avoidance Support Driver attention support Driver comfort Air-conditioning system, automatic Seat with armrest adjustable shock absorber driver side Seat with armrest adjustable shock absorber passenger side Bed upper lower and upper width 800mm. Night heater WTA cab heater 3kW. Storage rear lower, driver side - refrigerator. Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Front tyres 315/70R22.5. Rear tyres 315/70R22.5. Fifth wheel Jost JSK37C-Z, height 150 mm *STGO with axle/GVW design weights only. Fuel volume left side 825 dm3. Fuel volume right side 395 dm3. AdBlue tank capacity 150 l, right Fuel tank material aluminium. Speed limitation legal 90 km/h. Technology Infotainment system 2 DIN with 5 inch screen (Advanced) FMS, Fleet Management System preparation Gateway Exterior Headlamps LED (automatic). Daytime running light function LED and position lamps. Fog lamp front type LED 3 diodes Roof air deflector adjustable Fgjdpfx Ageymn Tqe Rsa Door window air deflector

Condition: used, functionality: fully functional, mileage: 371,546 km, power: 331 kW (450.03 HP), first registration: 03/2023, fuel type: diesel, overall weight: 8,253 kg, axle configuration: 4x2, wheelbase: 375 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2023, number of cylinders: 6, cubic capacity: 13,000 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Cruise control with active prediction Cab: CR Battery, 210 Ah, rear Diesel engine DC13 164 450 hp Euro 6 /Japan Emission 2016 Gearbox GRS905R Advanced Emergency Braking AEB, Auxiliary brakes, Retarder type R4100D, Exhaust brake control Driver comfort Air-conditioning system, automatic Seat with armrest adjustable shock absorber driver side Seat with armrest adjustable shock absorber passenger side Bed upper lower and upper width 800mm Night heater WTA cab heater 3kW Storage rear lower, driver side refrigerator Technical specifications smart ADR Continental Tyres for front axle, 315/70 Tyres for rear axle, 315/70 Jost JSK37C-Z, height 150 mm *STGO with axle/GVW design weights only Main wheelbase, 3750 mm Axle ratio, i = 2.53 Fuel tank capacity 825 l, left Fuel tank capacity 395 l, right AdBlue tank capacity 105 l, right Road speed limiter, adjustable, limiter (engine speed regulation) Technology Infotainment system 2 DIN with 5 inch screen (Advanced) FMS, Fleet Management System preparation Gateway Exterior Headlamps LED, automatic Daytime running light function LED and position lamps Fog lamp front type LED 3 diodes Cornering light Roof air deflector adjustable Door window air deflector Fgedpfxeyx Evns Ag Rja

Year of construction: 2026, condition: new, The VOGEL V540E is a high-performance, automated paper cushioning machine and one of the most efficient paper void fill systems in its class. It processes wide paper rolls up to 500 mm and produces high-quality, three-dimensionally structured paper cushions (“paper bubble cushions”) with outstanding cushioning properties. Ideal for professional packing stations, logistics centers, and larger e-commerce operations seeking an ecologically sustainable, high-performance, and cost-effective alternative to conventional bubble wrap. With automatic length control and an optional winding mode, the V540E is capable of producing both loose cushioning pads as well as complete cushioning rolls for storage or further processing. Advantages: - The VOGEL V540E is a high-performance, automated paper cushioning machine and among the most efficient paper filling systems in its category. - It processes wide paper rolls up to 500 mm and produces premium, three-dimensional structured paper cushions (“paper bubble cushions”) with excellent shock-absorbing properties. - Perfect for professional packing areas, logistics centers, and large e-commerce frameworks requiring an environmentally friendly, high-capacity, and cost-effective solution to traditional bubble wrap. - Thanks to automatic length control and optional winding mode, the V540E can manufacture both loose cushion pieces and full-length cushion rolls for storage or further processing. Special Features: - Easy operation - Excellent price-performance ratio - Optional winding station / automated cushion roll production Fgjdsyyv Rfjpfx Ag Roa - Optimal replacement for bubble wrap - 100% recycled paper Our Service for a Strong Partnership: - Free technical hotline - Long-term spare parts availability - 99% of spare parts available within 24/48 hours - We supply the right consumables for your application! About us: Since the early 1980s, we have accumulated practical expertise in handling packaging machinery. This makes us true experts – not just in the machines themselves, but also in their functionality, strengths and weaknesses, applications, consumables, and cost-benefit ratios. We always pass this experience on to our customers. For example: Attention! Mistakes in selecting a new product can quickly lead to high costs, making your investment uneconomical or resulting in insufficient performance!

Condition: used, mileage: 94,336 km, power: 110 kW (149.56 HP), first registration: 04/2008, overall weight: 3,500 kg, fuel type: diesel, color: white, gearing type: mechanical, emission class: euro5, total width: 1,993 mm, total height: 3,000 mm, number of seats: 2, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, ++ BUY ++ BUY ++ BUY ++ BUY ++ BUY ++ BUY ++ Mercedes Benz Sprinter 315 CDI with Rausch TV inspection system - RCA Proline with Sat Installed equipment: * RCA Proline control unit * ELKA 600 cable drum with approx. 250 m camera cable (renewed 2019) * Quattro SAT cable drum with approx. 90 m camera cable and 2 separate push rods approx. 18 m each * Swivel jib with winch for lowering camera/crawler * 1 crawler 1500 with KS200 head for main pipes DN200 to DN1500 * 1 SAT crawler with KS200 head and 2x KS60 SAT cameras * 1 crawler 1100 DN100 - DN250 * Additional halogen lighting, inclination and deformation measurement * Flushing device for cleaning house connections (add-on part) * Computer package with monitors (software for vehicle and office workstations included) * Reversing camera with monitor for driver for positioning vehicle with rear doors open * Water tank * Power supply via generator Chassis: Fedexc Sz Aopfx Ag Rsga * Mercedes Benz Sprinter 315 CDI, panel van, color: white * First registration: 04/2008, self-propelled working machine, green license plate * Fuel: Diesel * Wheelbase: 3665 mm * Engine output: 150 HP * Reinforced rear and front axles (shock absorbers) * Reinforced stabilizer front axle * High roof and high rear doors * Auxiliary hot-air heater, air conditioning * Amber rotating beacon front left / rear right / front * Rear door double-winged, 270-degree opening angle Special equipment: Rear door (270-degree opening angle), radio pre-installation, spare wheel with road tyres, spare wheel carrier under rear frame including jack, revolving beacons (2), passenger seat comfort, driver’s seat: comfort suspension, stabilizer rear, reinforced front stabilizer, reinforced shock absorbers, aux air heater (electric), partial limitation cargo area sliding door Additional features: Third brake light, driver's airbag, wash water level indicator, electrically adjustable and heated exterior mirrors, both sides, exterior mirrors with integrated indicators, 74 Ah battery, brake assist, driver's cab headliner, lockable glove compartment, body/build: high-roof panel van, child safety locks, fuel tank: main tank 75 liters, continuous partition in load compartment, load securing/tie down rings, headlight range adjustment, engine 2.1 liters - 110 kW CDI CAT, wheelbase 3665 mm, low-emission according to Euro 4 Gr. III emissions standard, sliding door right in load/passenger compartment, steel rims 6.5x16, service interval display Assyst, heat-insulating glass, permitted gross vehicle weight 3.50 t For further details and/or photos, please contact us directly. A wide selection of other vehicles for SALE or RENT can be found at: Specification, prior sale, and errors subject to change. The buyer is responsible for independently inspecting the condition and specification of the equipment. Year of manufacture for the chassis and the inspection system/superstructure may differ. Sale is strictly in line with our terms & conditions and with all warranties excluded.

Condition: excellent (used), Year of construction: 2013, General information Field of application: Construction Reference number: 2 Weights Empty weight: 5.500 kg Functional CE mark: yes Fgedpfoyym I Iox Ag Rsa Maintenance, history and condition Number of owners: 1 Technical condition: very good Visual appearance: very good Other information Fits to following machines: 58 t - 100 t Reconditioned: Yes Delivery terms: EXW Transport dimensions (LxWxH): 280011001 Working pressure: 160-180 bar Required hydraulic flow: 390 l/min Strike count: 280-480 Latest inspection: 2025-03-03 Production country: DE Additional information Please contact Ö. Inalkac for more information We offer you Rebuild/overhauled/ überholt Atlas Copco/ Epiroc HB5800DP from 2013. This model has New seal kit, retainer pins, bushes, stop pin, chisel/tool, shock absorber, hoses, decals and new painted. HB4700 HB4100 HB4200 HB3100 HB7000

Condition: used, mileage: 233,556 km, power: 132 kW (179.47 HP), first registration: 07/2019, next inspection (TÜV): 01/2027, Year of construction: 2019, machine/vehicle number: ZCFC170D3K5306775, Information: - Equipped with a Ramsey winch - Equipped with a sliding platform by Trevor (Type: ZP30-C1) Recently replaced components: Fgedpfx Agsyzm Aze Rea - Battery - Front axle shock absorbers - Brakes (completely on the front axle) - Inspection was carried out approximately six months ago The vehicle has a valid TÜV (roadworthiness certificate) until January 2027 and is in a well-maintained visual and technical condition. There are no outstanding maintenance tasks. Defects: The only known technical issue is that the gearbox makes noises in first and second gear as well as in reverse, which is a known issue with Iveco models. The vehicle does not leak oil. Additionally, the turbocharger was replaced about a year ago and has covered 30,000 km since then. Of course, we sell the vehicle without any signage/wraps. The vehicle can be inspected and test driven. After the sale, we will remove the wrap, and the vehicle can then be collected.

Condition: used, mileage: 189,000 km, power: 70 kW (95.17 HP), first registration: 01/2015, fuel type: diesel, color: white, gearing type: mechanical, emission class: euro5, total length: 6,000 mm, loading space length: 3,300 mm, Equipment: ABS, central locking, soot filter, Chat now via WhatsApp: Quick & easy contact with our sales advisor. Fgedpfeyl Rfgjx Ag Rea Attention! Preferred sale to business customers. Internal ID number: [3151] ----Optional extras available: * 12–64 months warranty (valid EU-wide) * New inspection * New TÜV & emissions test (AU) * Nationwide delivery * Financing possible even without down payment * Spring offer: Upon request and for an additional fee of just €999, towing capacity increase up to 3,500 kg (vehicle and manufacturer dependent). ----Vehicle highlights: * 19% VAT deductible * Regularly serviced * German vehicle * 1 owner * Ready for immediate use * Euro 5 emission standard * High roof & long wheelbase * Loading compartment with shelving * Tow bar rated for 3,000 kg * Reversing camera Special equipment: Audio system Audio 10 (radio with CD player), ceiling light in cargo area with door contact, 180A alternator, rear door (opening angle 270°), wooden floor in cargo area, co-driver double seat in cab, rear stabilizer, reinforced front stabilizer, reinforced shock absorbers, cargo/body trim: plywood compartment lining Further features: Third brake light, adaptive brake light, driver’s airbag, washer fluid level indicator, electrically adjustable and heated exterior mirrors (both sides), exterior mirrors with integrated indicators, 74 Ah battery, brake assist, ABS+ASR braking system, roof lining in cab, lockable glove box, body type: high-roof panel van standard, child safety locks, main fuel tank 75 L, continuous bulkhead, cargo tie-down points, headlight range adjustment, model refinement, 2.1L - 70 kW CDI engine, wheelbase 3665 mm, smoker package, tire repair kit with compressor, Euro 5 low emission standard, right sliding door in loading/passenger compartment, driver’s seatbelt warning system, seat upholstery: Lima fabric, steel wheels 6.5x16, Assyst maintenance interval display, heat-insulating glazing, permissible gross weight 3.50 t ----Leasing or financing required? We offer attractive offers — also possible without a down payment! Please feel free to contact us. Contact: Phone: Email: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln – Germany Business hours: Mon–Fri: 9:00 am – 6:00 pm Sat: 9:00 am – 2:00 pm ----Note: All information provided online is non-binding and intended solely for general vehicle description. Errors, typos, and prior sale excepted. The binding condition of the vehicle is determined exclusively by the purchase contract concluded on site or by written confirmation. For vehicles with more than 50,000 km or older than 3 years, we prefer to sell to our business customers.

Condition: good (used), Linear drive, linear gearbox, lifting gearbox, spindle drive, pneumatic drive, slide, guide, electromechanical linear axis, mini slide, mini slide -Manufacturer: Festo: Mini slide type DGC -Stroke: 430 mm -Shock absorber: DGC 18-460-KF-YSRW-A -Quantity: 1x sled available Fgedpfx Ageywtias Rsa -Dimensions: 665/60/H65 mm -Weight: 2.5 kg

Condition: used, mileage: 220,000 km, power: 100 kW (135.96 HP), first registration: 08/2014, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro5, number of seats: 3, total length: 7,000 mm, loading space length: 4,300 mm, Equipment: ABS, air conditioning, central locking, soot filter, Chat now via WhatsApp: Get in touch quickly and easily with our sales consultant. Attention! Sale preferably to business customers only. Internal ID Number: [3219] ----Optional extras available: * 12 to 64 months warranty (valid throughout the EU) * New service inspection * New MOT & emissions test * Nationwide delivery * Financing available, also with no down payment * Tow bar retrofitting available upon request * Spring offer: On request and for a surcharge of only €999, the towing capacity can be increased to up to 3,500 kg (depending on vehicle and manufacturer). ----Vehicle highlights: * 19% VAT deductible * Regularly serviced * German specification vehicle * Second owner * Ready for immediate use * Meets Euro 5 emissions standard Fsdpfx Asyw Er Heg Rsga * Maxi version, high roof & long wheelbase * Automatic climate control * Cruise control * Reversing camera * Load compartment lined with wood * Towing capacity = 3,000 kg Special equipment: Storage: shelf/compartment under front headliner, audio system RSD 2000 (front speakers), BlueMotion Technology version, electrically adjustable & heated exterior mirrors, EcoProfi Eco Package, EcoProfi driver’s cab package, driver assistance system: front & rear parking sensors, chassis: reinforced rear shock absorbers, adjustable steering column, spare wheel with road tires, hinges for rear doors with wider opening angle, reinforced rear stabilizer, rear entry step integrated into the bumper, high wood panelling in loading/passenger compartment, pre-wiring for tow bar (socket & wiring) Further features: Driver’s airbag, traction control (ASR), EcoProfi, driver assistance: brake assist (HBA), rear wing doors without windows, bodywork: high roof panel van, body variant: high roof, 75-litre fuel tank, high solid partition wall without window, side marker lights, model upgrade, engine 2.0 litre – 100 kW TDI, parking light control, wheelbase 4,325 mm, low-emission Euro 5 compliant, right-side sliding loading/passenger door, seat upholstery: fabric, cab seats: driver’s seat height adjustable, reinforced front stabilizer, steel wheels 6.5x16, permissible gross weight 3.5 t, additional brake light ----Interested in leasing or financing? We offer attractive options – also with no down payment possible! Feel free to contact us. Contact: Phone: E-mail: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln, Germany Opening hours: Mon–Fri: 9:00 am – 6:00 pm Sat: 9:00 am – 2:00 pm ----Note: All information provided online is non-binding and serves only as a general description of the vehicle. Errors, typos, and prior sale reserved. The binding condition of the vehicle is determined solely by the purchase contract on site or by written confirmation. We prefer to sell vehicles with mileage over 50,000 km or older than 3 years to business customers.

Condition: new, * IMMEDIATE AVAILABILITY * with black superstructure, 100 km/h approval, rear supports, alloy wheels Technical Specifications: • Type: New vehicle • TÜV: New/2 years • Availability: IMMEDIATE! • Permissible total weight: 1350 kg • Unladen weight: approx. 365 kg • Payload: approx. 985 kg • Internal dimensions: 258 x 148 x 157 cm (L x W x H) • Overall external dimensions: 401 x 191 x 210 cm (L x W x H) • Loading edge height: approx. 51 cm • Tires: 13-inch alloy wheels • With brake: yes Fsdeyyw H Uspfx Ag Rega • Jockey wheel: yes • 100 km/h: included! • Including vehicle documents Body configuration: • Floor: plywood, anti-slip coated, 15 mm • Walls: 15 mm multilayer wood, plastic-coated • Roof: 15 mm multilayer wood, plastic-coated • Running gear: KNOTT rubber spring axle • Number of lashing eyes: 6 • Rear doors: yes, double-wing • Tailgate: no • Tailgate material: plywood • Rear gate/door locking mechanism: compression rod lock • Interior lighting: yes, LED with switch • Supports: yes, 2 pieces • Overrun braking system & brake: yes, KNOTT • Frame/chassis: V-drawbar, fully hot-dip galvanized • Lighting plug: 13-pole • Registration: ZBII & COC documents Standard equipment: • Robust V-drawbar, fully hot-dip galvanized • Overrun hitch by KNOTT • 15 mm thick floor panel • Side walls and roof made of 12 mm multilayer wood with UV-resistant BLACK plastic coating • Interior LED light mounted • Galvanized compression rod lock and hinges • Wheel shock absorbers + 100 km/h approval • Alloy wheels • 6 lashing rings on the floor • Jockey wheel • Automatic reversing system • Plastic mudguards • 13-pole plug • Reversing light • Large size safety lighting • Integrated rear fog light • Superstructure: splash-proof • Registration papers: ZBII & COC papers Optional accessories available - please inquire: • Anti-theft device • Motorcycle wheel chocks • Motorcycle rails • Motorcycle lashing straps • Lashing straps • Additional lashing eyes • Slot-hole rails for tie-down straps & load bars • Slat rails with rubber coating for tie-down straps & load bars • Load bars, steel or aluminum • Interior lighting • Reversing lights • and much more. New vehicle with warranty and TÜV. ————— - Financing or leasing available - Nationwide delivery possible - All prices include VAT - Pre-shipment of the vehicle registration document possible or transit plates (Germany) can be provided - Export plates incl. customs declaration available Descriptions and pictures are copyrighted!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 800 trailers immediately available from our stock! We have been a specialized dealer and repair workshop for over 30 years for Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - Subject to errors, changes, and prior sale -