Used Shop Equipment for sale (42,020)

Condition: used, Technical details: max. temperature: 150° Grad voltage: 380 Volt V / Hz current- max.: 6,5 A weight: 65 kg dimensions L x W x H: 0,68 x 0,22 x 0,58 m Working Area / Application: water tempering system transportable Duedpju N Ag Rsfx Abujn - connection coolant water: inlet and outlet Ø 12mm internal with bayonet connection - connection circulating medium: inlet and outlet Ø 12mm with bayonet connection - control via control panel equipment: - 1400mm connection cable Optional test run possible. *

Year of construction: 2009, condition: used, Technical details: tool taper: Ø 54 voltage: 3Ph AC 400V / 50-60 Hz V / Hz compressed air: Anschluß: 6 bar total power requirement: 11 kW Total weight, approx.: 120 kg dimensions L x W x H: 0,7 x 0,65 x 1,7 m Djdpfxowp I S He Abuoun Application: for secondary quick tool change through targeted inductive heating. Induction shrink fit unit with water cooling (tank 30 litres, built into the housing) Cooling medium: emulsion for Ø 3 - 50mm HM (carbide) and Ø 6 - 50 HSS tools Tool holder Ø 54mm Concentricity < 0,003mm ThermoGrip chuck Operation via control panel *

Condition: like new (used), Handling equipment for a finger jointing line. Roller conveyors, wide- and narrow belt conveyors, a trim saw conveyor, Dujdpfx Aod Duz Eebusn trim saws, etc. See pictures. With documentation. Good condition, made by Martek in Finland.

Condition: used, AZO weighing bunker Type: Weighing bunker D800 Dodpox Nzvljfx Abueun Vacuum filter D500-65, 2.5 m² filter area Year of manufacture: 2017 3 load cells, 150 kg each See our other advertisements VMA Wekerom

Condition: used, AZO 3-point weighing hopper with vacuum filter D800 x 303 x 1753mm Equipped with 3x load cell, 150kg each Dsdpfx Abjx Nyk Uoueun Equipped with vacuum filter D500-65, 2.5m² filter area Year of manufacture: 2014 See our other listings VMA Wekerom

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: 2025, Shop Oven Unox Bakerlux 4 Shop.Pro Touch New NEW NEW NEW NEW NEW NEW NEW NEW NEW Unox Bakerlux Shop.Pro Touch Convection oven for 4 trays 600 x 400 mm Dsdpfxsxmrlij Abueun Stainless steel design with front glass panel with touch panel control and programmable settings Baker’s oven High-performance convection oven Connection: 400V, 16A-CEE plug Dimensions: 800 x 811/860 x 502 mm (WxDxH) Oven is NEW & SAB tested with warranty + spare parts service Quality from Unox specialist dealer & service partner! Benefit from over 35 years of experience! Options: Baking trays 600x400 ALU perforated trays 600x400 Undercarriage Lievox proofing cabinet Exhaust hood Ethernet connection DDC App Pure water filter Delivery service Maintenance contract Spare parts box for added security Service package Instruction & commissioning Visit our Unox Baking Center!

Condition: good (used), functionality: fully functional, input voltage: 400 V, DGUV certified until: 09/2026, cutting width (max.): 16 mm, type of input current: three-phase, total length: 700 mm, total width: 1,000 mm, total height: 1,050 mm, nominal power: 1.6 kW (2.18 HP), input frequency: 50 Hz, space requirement height: 1,050 mm, space requirement length: 700 mm, space requirement width: 1,000 mm, Rego Herlitzius Shop Sickle Blade Slicer Mobile stainless steel design Manual operation via rotary knob Cutting width 3 - 16 mm Connection: 400V, 16A CEE plug Dimensions: 1000 x 700 x 1050 mm (W x D x H) Used machine, SAB inspected Djdpovktlvofx Abusun Many more bread slicers in stock!

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 3,500 mm, total length: 7,050 mm, total width: 4,100 mm, volume flow: 36,000 m³/h, temperature: 80 °C, input voltage: 380 V, heating capacity: 250 kW (339.91 HP), Equipment: cabin, lighting, Paint and Drying Booth Dsdpfx Aboxa H Ewoujun It is the centerpiece of your entire painting operation: the combined paint and drying booth. (Alternatively available as a separate paint booth with a dedicated dryer.) Our solutions feature full-surface ceiling filters and, optionally, full-surface floor extraction with drive-over grating or wall extraction at the position of your choice. If you wish to further increase the efficiency of the system beyond heat recovery and infinitely variable control via frequency converter, we can also offer you a sectional control system. This enables you, for example when doing spot repairs or partial booth loading (such as painting only add-on parts), to activate only the section where the parts are located. This allows you to operate with a reduced air volume, save energy, and minimize costs, all without compromising quality. Feel free to contact us – we would be happy to demonstrate these options in detail. Do you have any questions or suggestions? We are happy to assist you.

Condition: new, Year of construction: 2025, total height: 4,000 mm, total length: 7,000 mm, total width: 3,000 mm, warranty duration: 24 months, temperature: 80 °C, air demand: 36,000 m³/h, input voltage: 380 V, heating capacity: 345 kW (469.07 HP), power: 40 kW (54.38 HP), fuel: liquid petroleum gas (LPG), energy consumption: 40 kWh, insulation material: Mineralwolle, insulation thickness: 50 mm, nominal power: 345 kW (469.07 HP), Equipment: lighting, MAIN STANDARD Our paint booths are designed to meet all necessary requirements for paint application, including air filtration, extraction, lighting, and a controlled environment. Booth processes are managed via a PLC system, ensuring that desired values are maintained consistently. OPERATING PRINCIPLES OF THE BOOTH The booth’s processes are managed through a control panel, which oversees the following steps: PAINTING PROCESS During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled through the extraction unit. Floor filters (paint stop filters) collect paint particles, and the air passes through final exhaust filters before being discharged. FLASH-OFF PROCESS After painting, the booth continues operating for approximately 15 minutes to purge residual solvents and thinners. During this phase, fresh air circulates from outside into the booth. DRYING PROCESS In this stage, 80% of the air passing through the booth is heated to 60°C and introduced via a distribution system. Since 20% of the solvent is released during drying, it is expelled with the exhaust air. Industrial coatings are typically dried at 60°C, but the booth temperature can be adjusted as needed via the control panel. Dusdpfx Abswzmcbouen COOLING PROCESS After the 30-minute drying cycle, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the subsequent 5-minute cooling phase, fresh air from outside circulates through the booth, after which the system shuts down automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT These control panels govern the functions and operation of machines and devices housed within the booth. The panel is made of durable galvanized sheet and steel profiles and is fully enclosed to protect against dust and moisture. Electrical Equipment and Control Panel: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control connections between the control panel and motors or other electrical devices. • Electrical wiring is designed to accommodate booth relocation if needed. • Operating equipment uses 380 V 50 Hz, while control devices operate at 220 V. • The booth’s operation time can be monitored on the electronic control panel, enabling straightforward maintenance scheduling. • Temperature and time settings for booth ventilation (solvent flash-off), intermediate drying, and final drying can be easily adjusted to required values on the digital display of the electronic control panel. • Users can monitor and adjust the drying time using the heating thermostat and time relay.

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 5,600 mm, total length: 11,200 mm, total width: 5,100 mm, type of input current: three-phase, warranty duration: 24 months, inner dimension height: 4,970 mm, inner dimension length: 11,000 mm, temperature: 80 °C, inner dimension width: 5,000 mm, air demand: 52,000 m³/h, input voltage: 380 V, heating capacity: 250 kW (339.91 HP), power: 45 kW (61.18 HP), fuel: liquid petroleum gas (LPG), input frequency: 50 Hz, energy consumption: 45 kWh, insulation thickness: 50 mm, nominal power: 250 kW (339.91 HP), sheet thickness steel (max.): 2 mm, Equipment: lighting, * Air Preparation Unit: The air preparation unit is a recirculation system that supplies the cabin with filtered fresh air and exhausts used air during the painting process. It heats the air to 60 °C, mixes the used air with 10% fresh air via an automatic multi-damper system, and reheats the air before routing it back into the cabin. The air is heated using a burner and a heat exchanger, both made of high-quality 304 stainless steel and housed within the fresh air unit. During painting, the air is filtered twice (via front and ceiling filters) before it enters the cabin. The contaminated air is also filtered twice (through inlet and outlet filters) before it exits via the exhaust unit. Air preparation units are insulated like the side walls to minimize heat loss and are protected against potential vibration and noise thanks to rubber seals on the covers. The exhaust air is regulated by a damper in the outlet duct, which helps control the internal pressure of the cabin. * PRINCIPLES OF CABIN OPERATION: The processes in the cabin are controlled via a control panel that manages the following steps: * PAINTING PROCESS: During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled by the extraction unit. Floor filters (paint stops) capture paint particles, and the air passes through the final exhaust filters before being discharged. * FLASH-OFF PROCESS: After painting, the cabin operates for approximately 15 more minutes to purge residual solvents and thinners. During this phase, fresh air from outside continues to circulate in the cabin. * DRYING PROCESS: In this phase, 80% of the air passing through the cabin is heated to 60 °C and supplied to the cabin via a distributor. As 20% of the solvent is released during drying, these solvents are expelled with the exhaust air. Industrial coatings are typically dried at 60 °C, but the cabin temperature can be adjusted via the control panel as required. * COOLING PROCESS: After the 30-minute drying process, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the 5-minute cooling phase, fresh air from outside circulates in the cabin, after which the system stops automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT: Dedpfx Abowzl Hxjuoun These control panels manage the functions and operation of all machinery and devices inside the cabin. The control panel is constructed from durable galvanized sheet metal and steel profiles and is fully enclosed to protect against dust and moisture. Electrical devices and control panels: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control lines between the panel and motors or other electrical devices. • Electrical wiring is designed to allow for cabin relocation if necessary. • Operating devices use 380 V 50 Hz, while control devices use 220 V.

Condition: excellent (used), quality grade 1 Dusdpeu Dpayjfx Abuon

Condition: new, color: red, Tool carrier Dsdpfx Abjx I E Upjusun Handy accessory for quick and easy moving of machines with 3-point connection. Suitable for use on pallet forks.  Condition: New

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, DGUV certified until: 11/2026, cutting width (max.): 16 mm, type of input current: three-phase, total length: 700 mm, total width: 1,000 mm, total height: 1,050 mm, input frequency: 50 Hz, year of last overhaul: 2022, space requirement height: 1,050 mm, space requirement length: 700 mm, space requirement width: 1,000 mm, Rego Roto Shop DL rotary knife slicer; knife newly sharpened and coated; manual operation via rotary control; cutting width 3–16 mm; power supply: 400V, 16A CEE plug; bread chute: 40 x 23 cm; dimensions: 1000 x 700 x 1050 mm (W x D x H); used machine, cleaned, SAB tested. Dujdjrhv E Nopfx Abujn Option: Maintenance contract Delivery service Instruction & commissioning TOP bread slicing machines in stock!

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: 2025, Deck Oven Unox Bakertop 6 Countertop Plus NEW NEW NEW NEW NEW NEW NEW NEW NEW Technologically advanced combi oven for fresh or frozen baking processes and for a wide range of gastronomy cooking applications (dehydrating, steaming, low-temperature baking, sous-vide cooking, roasting, grilling, pan frying, regeneration, and plate regeneration). Thanks to the Unox Intensive Cooking touch controls and Intelligent Performance, perfect results and repeatability for any loading capacity are guaranteed. Automatic cooking process management (CHEFUNOX) ensures perfect results even for untrained personnel. Convection oven for 6 trays 60x40 cm Unox Oven with Intelligent Performance Touch panel with 1000+ programs Core temperature probe USB port Rotor.Klean self-cleaning system Powerful convection oven Connection: 400V, 32A CEE plug Water connection: 3/4 inch, water drain: DN 40 Dimensions: 860 x 967 x 842 mm (W x D x H) Oven NEW with warranty + spare parts service Quality from the Unox specialist dealer & service partner! Benefit from over 35 years of experience! Option: - Pure water filter - Baking trays Dusdpfx Abexmrlpeuon - Lievox proofing cabinet - Ethernet interface DDC.App - Extraction hood with condensation trap - Spray & Rinse cleaner - Service package - Base stand - Maintenance contract - Delivery service - Setup & commissioning Visit our Unox Baking Center!

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 19E023b, Complete skid Data sheet attached (Technical proposal X230) Nominal feed flow: 17,048 L/h Maximum operating pressure: 40 bar Maximum operating temperature: 50°C Total filtration surface: 960 m2 Total power: 66 kW Stainless steel connections Dedpfjx R Swcjx Abusun Length: 5600 mm Depth: 4500 mm Height: 3500 mm Accessories (feed pump, instrumentation, electrical cabinet with supervision, multistage high-pressure pump) CIP loop included (excluding chemical IBC)

Year of construction: 2000, operating hours: 1 h, condition: used, Transmission: Automatic Power: 1 kW (1 HP) Duodpfxjx R Uamo Abuen Empty weight: 645 kg Please contact Emal Jaweed for more information

Year of construction: 2000, operating hours: 1 h, condition: used, Transmission: Automatic Dusdpox R T Snjfx Abujn Power: 1 kW (1 HP) Empty weight: 1 kg Please contact Emal Jaweed for more information

Year of construction: 1995, operating hours: 1 h, condition: used, Transmission: Automatic Power: 1 kW (1 HP) Djdpfx Asx R T Hlobueun Empty weight: 1 kg Please contact Emal Jaweed for more information

Year of construction: 2012, operating hours: 1 h, condition: used, Transmission: Automatic Power: 1 kW (1 HP) Dodpfsx R T D Dox Abuoun Empty weight: 20.000 kg Please contact Emal Jaweed for more information

Year of construction: 2007, operating hours: 15,215 h, condition: used, Transmission: Automatic Power: 280 kW (381 HP) Duodpjx R T Dqofx Abuon Empty weight: 50.000 kg Please contact Emal Jaweed for more information

Year of construction: 2014, operating hours: 1 h, condition: used, Transmission: Automatic Dedpfx Aex R Tyxobuoun Power: 1 kW (1 HP) Empty weight: 1 kg Please contact Emal Jaweed for more information

Condition: used, tank capacity: 8,000 l, GENERAL Equipment: Level indicator (without guarantee), crane lugs Design: upright Remarks: Manhole diameter (cylinder): approx. 420 x 320 mm; 2 thermoplates in the cylinder area Internal diameter: 1,800 mm Total height: 3,925 mm Heating/cooling: available Max. permissible operating overpressure: 6.0 bar Support design: feet Location: external storage Technical documentation: drawing Cylinder temperature control: thermoplate Volume: 8,000 liters Product contact material: V2A 1.4301 (AISI304) Condition: factory new Cylindrical height: 2,976 mm TANK Number of feet: 3 FEATURES Manhole / dome: in the cylinder, in the top (DN 400) Dusdpfjx Dmb Tjx Abusn Outlet: DN50 DIN 11851 MATERIAL SPECIFICATION Outer surface: marbled

Condition: used, tank capacity: 1,000 l, GENERAL Equipment: Level indicator (without guarantee) Design: upright Remarks: Manhole diameter: approx. 420 x 320 mm Internal diameter: 820 mm Total height: 2,350 mm Heating/Cooling: available Max. permissible operating overpressure: 6.0 bar Base type: feet Location: external storage Technical documents: drawing Cylinder tempering: Thermoplate Volume: 1,000 liters Product-contacting material: V2A 1.4301 (AISI304) Condition: factory new Cylindrical height: 1,238 mm TANK Number of feet: 3 pcs EQUIPMENT Manhole / Dome: in the cylinder Outlet: DN50 DIN 11851 Djdpox Dmbgjfx Abusun MATERIAL CHARACTERISTICS Exterior surface: marbled

Year of construction: 2015, operating hours: 292 h, condition: used, Empty weight: 14.400 kg Chassis type: rigid General condition: very good Duodpjxy Rf Usfx Abuen Technical condition: very good Visual appearance: very good Delivery terms: EXW Transport dimensions (LxWxH): 6,2x2,45x2,5 Production country: CH Please contact Vink Machinery for more information Menzi Muck M545 * 2015 * Diesel drive * Demo model * 292 operating hours * 4x4x4 * Air conditioning * Independent suspension

Condition: excellent (used), functionality: fully functional, KALLFASS Foil packaging machine with shrink tunnel Plant consists of: 1) Kallfass Universa 8060/200 foil wrapping & sealing Dsdpowcnqcjfx Abueun 2) Compact 650SO shrink tunnel 3) Outfeed conveyor system - extra 4) Storage device for wrapped packages - extra The goods to be packaged are film-wrapped and sealed inside the Inversa and then shrink-wrapped in the Compact-tunnel. Via a conveyor system the wrapped packages are transported to a parcel storage station. Further technical info => check photos Please phone or mail