Used Shrink Wrap Machine for sale (65,257)

Year of construction: 2010, condition: excellent (used), functionality: fully functional, 1 x Giemme Thermo Packaging Machinery S.r.l. semi-automatic shrink bundling machine. Manufacturer – Giemme Thermo Packaging Machinery S.r.l. Model – ALTAIR 70 P. Serial number – 001.041.10. Date of manufacture - 2010. Speed – up to 12 packs/minute. Electrical supply – 400 V / 50 hz / 3 phase. Power – 20 kW. Overall dimensions – 3000mm long x 1200mm wide x 2000mm high. Hedpfoyzxgfsx Abuew

Year of construction: 2012, condition: excellent (used), functionality: fully functional, 1 x Marden Edwards Limited semi-automatic shrink wrapper and heat tunnel. Supplied with new belt. Manufacturer: Marden Edwards Limited Shrink wrapper: Model - ES 60. Serial number - W3710. Heat tunnel: Model - M25-40T. Serial number - W3708. Date of manufacture - 2012. Tunnel aperture dimensions - 515mm wide x 410mm high. Hedpfx Abozwxv Nsujw Film roller - 595mm long. Sealing bar - 640mm long. Cutting knife - 620mm long. Height between sealing bar and rollers at maximum height - 345mm high. Electrical requirements - 230 V / 50 hz / 1 phase.

Condition: excellent (used), Year of construction: 2017, operating hours: 627 h, functionality: fully functional, total length: 6,900 mm, total height: 1,800 mm, total width: 1,600 mm, type of input current: three-phase, input voltage: 400 V, input current: 62 A, passage height: 300 mm, overall weight: 1,200 kg, passage width: 800 mm, input frequency: 50 Hz, nominal power (apparent): 43 kVA, throughput speed: 20 mm/s, temperature: 250 °C, Equipment: documentation/manual, BVM SC 8530 D3 Shrink Tunnel – Year of Manufacture 2017 – approx. 627 operating hours For sale is a BVM shrink tunnel SC 8530 D3, year of manufacture 2017, in technically flawless and visually very good, well-maintained condition. Hsdpfx Aozwk T Tsbuow The system has only approximately 627 operating hours and is suitable for shrinking packaging films using hot air circulation. The adjustable tunnel transport and the adjustable side and bottom air flow allow the shrinking result to be adapted to different products and films. Technical data Manufacturer: BVM Brunner GmbH & Co. KG Type: SC 8530 D3 Year of manufacture: 2017 Machine no.: 20170962241 Commission no.: 6224 Operating hours: approx. 627 h Mains voltage: 3N 400 V Mains frequency: 50 Hz Current consumption: 62 A Power: 43 kVA Fuse rating: 63 A Max. passage width: 800 mm Max. passage height: 300 mm Transport speed: approx. 1.2 m/min at 50 Hz Working temperature: 110–250 °C Suitable for film types up to 100 µm External dimensions L × W × H: approx. 6,900 × 1,600 × 1,800 mm Total weight in operating condition: approx. 1,200 kg Sound emission: ≤ 75 dB(A) Equipment / Functions Hot air circulation Adjustable tunnel transport Temperature control Adjustable side air flaps Adjustable bottom air flow Heating fan Cooling fan Electronic preset counter Emergency stop device Cooling automatic Clean and clearly structured control cabinet Original operating manual available Condition The system is in perfect technical condition and is also visually in very good and well-maintained condition. With only approximately 627 operating hours, the machine has very low operating hours. Price €17,000 (negotiable) Inspection possible by arrangement. Further information and pictures available upon request. Subject to prior sale and errors.

Condition: used, Stedler SAM-BA-MAT E 500 Shrink wrapping machine AM-BA-MAT E 500 Shrink packaging machine Functional description The machine is used for individual or collective wrapping of packages with polyethylene shrink film. * Operating principle: Semi-automatic and pneumatic. * Process: The product is manually fed via a size adjustment slide; all subsequent steps (banding, further transport to the shrink tunnel) are carried out automatically. Hsdjtzbkkopfx Abusw * Sealing process: A continuously heated safety sealing unit separates and seals the film. A Teflon cloth prevents the film from sticking to the sealing blade. Film roll placement * Positioning: The rolls are placed on pairs of support rollers at the top and bottom. * Adjustment: Adjustment rings limit the film laterally with a clearance of approximately 1–2 mm (adjustment is made using an Allen key). * Preparation: The film ends are guided through the sealing unit. By moving the infeed carriage back and forth once, the separating sealing process is pneumatically initiated, creating the so-called film curtain. * Film material: Processes two rolls of flat shrink film made of polyethylene. * Film thickness: The recommended standard thickness is 40 µm (micrometers). * Film alignment: The rolls are fixed with adjustment rings, allowing for a lateral clearance of 1–2 mm. * Film width: The maximum width is 210 mm. * Control: The machine operates pneumatically and is activated via a manual infeed slide. Machine data Manufacturer: Stedler Type: SAM-BA-MAT E 500 Operating voltage: 230 V Connected load: 0.75 kW Operating principle: Semi-automatic and pneumatic [Image content] Dimensions (L x W x H): 1500 x 1170 x 1300 mm Year of construction: 2004 Sealing & film specifications Maximum temperature: 250 °C Sealing readiness: approx. 1.5 s Film material: Flat shrink film made of polyethylene (PE) [Image content] Film width: up to 210 mm Film thickness: 40 µm (micrometers) More items in other sizes - new and used - can be found in our shop! International shipping costs on request!

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: h288 di, power of vacuum pump: 11 W, overall weight: 4,900 kg, Resta Automatic Mattress Packaging Machine: Integrated Compression and Decompression The Resta mattress packaging machine is an automatic packaging machine designed for the industrial packaging of mattresses. In practice, on your production line, this machine performs double packaging with mattress compression followed by decompression, while also protecting it in a suitable film. Advantages of Mattress Packaging in Production and Distribution First and foremost, an efficient mattress packaging machine reduces transport volume by 70 to 80%. The mattress remains compressed during transit and then returns to its original shape upon arrival. In practice, you save storage space and reduce logistics costs. Automated Compression: Mattresses are bagged in PVC or plastic film, without manual intervention. Easy Decompression: The mattress returns to its normal shape in the store or at the customer's location. Optimized Transport: Significant reduction in volume, with more space in the truck and in storage. Presentation for Sale: Final presentation of the mattress in suitable commercial conditions. Vacuum Packaging Machine: Protection and transport of the mattress. What truly changes in production is material compatibility. The Resta mattress packaging machine adapts to different types of mattress films, including PVC film and plastic film, and ensures an airtight seal. The fully automatic packaging process avoids manual handling, limits the risk of tearing, and maintains consistent quality. Compatibility with Spring and Foam Mattresses This is particularly beneficial when your production involves both spring mattresses and foam mattresses. This packaging machine handles both types without major reconfiguration. The equipment can accommodate both bagged mattresses and compressible structures, which simplifies workshop organization. Spring Mattresses: Compression without damage to the springs, thanks to a progressive hydraulic system. Foam Mattresses: Adaptation tailored to the product, with rapid shape recovery after compression. Compatibility with PVC film and other specialized packaging films. Professional Sealing: Airtight closure of the film to protect the mattress during transport. Industrial Applications and Mattress Packaging Processes In practice, on an industrial mattress packaging line, this automatic Resta packaging machine integrates after the… Special Feature: Enables double, independent packaging (two separate bags) within the same footprint as a standard packaging machine, thanks to two superimposed polyethylene rolls. Also allows for single or customized packaging (two different rolls, automatic change according to programming). The feed conveyor and disconnectable press also allow for packaging of bed bases. Manual and/or automatic operation, interfaceable with barcodes or RFID on the production line. Official Technical Specifications: Weight: 4,900 kg Hodezmpvrepfx Abuew Electrical consumption: 11 kW Compressed air: 6-10 bar Power supply: 400V – 50Hz three-phase Available Options: Press with 2 or 4 cylinders Reinforced hoist Motorized cradle for additional customization rolls Kit for disposal of polyethylene waste

Condition: good (used), Italdibipack Swing 4255 Shrink wrapping machine Hodpfxez S Ulhs Abuew The machine is in full working order, ready for production, and in very good condition. The photos show the actual product being sold. Made in Italy. Description: The „Swing” series of L-sealer shrink wrapping machines is characterized by a compact design, allowing them to occupy less space than other similar systems available on the market. Technical specifications: Sealing bar dimensions: 420 × 550 mm Max. product height: 230 mm Power supply: 230V

Condition: ready for operation (used), functionality: fully functional, total length: 5,000 mm, film width: 550 mm, product height (max.): 200 mm, product width (max.): 400 mm, product length (min.): 80 mm, Equipment: documentation/manual, Shrink wrapping machine Manufacturer: Hugo Beck Type: Flexo 500 S Horizontal flow wrapping machine with side sealing for tubular film, consisting of a wrapping machine and a subsequent shrink tunnel. The Flexo 500 tubular film machine boasts the highest degree of variability and flexibility. Whether for frozen pizzas, biscuit boxes, fruits and vegetables, books, skis, laminate flooring, or various household products, etc. – with this machine, you can quickly adapt to any application, for example, for daily changing orders. - Wrapping machine Hugo Beck Flexo 500 S, year of manufacture 2003 Workpiece dimensions: Width approx. 55 - 400 mm Height approx. 2 - 200 mm Length from min. approx. 80 mm to theoretically unlimited Consumable/film: half-tube, PE, PP Roll diameter: 350 mm Film width: 550 mm Feed rate approx. 20 m/min. Rated voltage 400/230 V, 50 Hz, 3 phases Rated current 5 A Hjdpoyw H Rkefx Abusw Connected load 3 kW Machine dimensions approx. 2500 x 1500 mm L x W Weight approx. 650 kg - Shrink tunnel Hugo Beck Type HV 601, year of manufacture 2002 Working width approx. 600 mm Clearance height approx. 300 mm Feed rate continuously adjustable Chain slat conveyor, silicone-coated transport slats Temperature control via electric thermostat, separately adjustable lower and upper heat Heating approx. 4 - 12 kW Rated voltage 230/400 V, 50 Hz, 3 phases Rated current 19 A Connected load approx. 12 kW Machine dimensions approx. 2500 x 1100 mm L x W Weight approx. 400 kg

Condition: refurbished (used), Year of construction: 2004, functionality: unexamined, total width: 1,200 mm, total length: 5,000 mm, total height: 2,000 mm, product height (min.): 850 mm, film width: 420 mm, The machine can process both hard and soft film, is capable of tray forming, product gas flushing, and has forming tool cooling, or can perform only vacuum forming. Various forming tools included: 1:1; 1:2; 1:3; additionally, slice packs with peel corner are possible. Comes with a fully refurbished vacuum pump. Also included are approximately 50 rolls of film. The machine must be removed from the premises, hence special price for everything: €3,000 negotiable. Hedpoynnlcefx Abujw

Condition: like new (used), Year of construction: 2020, Professional Vacuum Packaging Machine Minipack-Torre MVS 45 X I am offering for sale a professional chamber vacuum packaging machine, the Minipack-Torre MVS 45 X, manufactured by the well-known Italian company, Minipack-Torre. The machine is in excellent, like-new condition and has been very well maintained. It features a high-quality stainless steel construction and digital controls. Suitable for professional vacuum packaging of food and other products. Ideal for restaurants, butcher shops, food processing facilities, and small manufacturing businesses. Hjdpfoz Rv R Nsx Abuow Technical Specifications: Manufacturer: Minipack-Torre, Italy Model: MVS 45 X (MV45X) Year of manufacture: 2020 Power supply: 220–230 V Frequency: 50–60 Hz Maximum power consumption: 1.1 kW Maximum current: 6 A Digital control panel Stainless steel construction Transparent vacuum chamber lid CE marking Condition: Like new Price: €600 Location: Ivanka pri Nitre, Slovakia For more information or if you are interested, please feel free to contact me. The machine can be inspected in person by prior arrangement.

Condition: used, Offered for sale is an automatic shrink-wrapping system with film feed and shrink tunnel. The system consists of a packaging machine with an enclosed working area and a downstream shrink tunnel. Control system: Control panel with display, membrane keypad, control buttons and emergency stop button. Equipped with film roll holder, film guide, motorized conveyor belts, transparent protective enclosure and signal light. Inspection possible by arrangement. Hsdpoz N E Ubofx Abujw

Condition: used, Year of construction: 1993, Technical details: mould plates - length / width: 500 x 400 mm Heating: Zweistufen Heizung 4,6 und 6,0 kW control: SPS voltage: 380 V (3x 20A) / 24 DC V work height adjustable: 870 - 970 mm total power requirement: 6 + 2,5 kW dimension machine xH: 2,8 x 1,1 x 1,3 m weight: 570 kg Compact angle welding machine with shrink tunnel PACKAGING MACHINE WITH SHRINK TUNNEL AND COOLING STATION AND SPECIAL COOLING FAN movable/mobile Application areas/products: -div. brochures, plans or other made of paper/cardboard in DIN A 5 / DIN A 6 Applicable films: all half tube shrink films up to 0,060mm Hedpfou Nu Hiox Abuew Welding system = impulse welding, with teflonized separation seam, adjustable automatic transport of goods into the shrink tunnel further details: -Tunnel passage width: 450mm -Tunnel passage height adjustable to 100, 200, 300 and 400mm -length of the heatable tunnel hood 900mm -Prod. output of the machine depends on product and film 5 to 20 cycles / minute (manufacturer's data) -max. film width (folded half tube) 550 / 550mm at 25 - 50 my -frame dimension 500 x 500 x 290 mm = max. Verpackungsmaß Heating: -two stage heating 4,6 and 6,0 kW -Fan infinitely variable Cooling station: -outlet 300mm -with blower Conveyor belt: -feed rate 2.5 - 12 m/min -steplessly adjustable i.d. *

Condition: good (used), Year of construction: 1990, type of input current: three-phase, Film wrapping machine + shrink tunnel KUPER DUPLEX 2100/650 + KUPER ST/I-1400 Film wrapping machine Manufacturer: Kuper Type: DUPLEX 2100/650 Year of manufacture: 1995 Film roll width at the top: 2000 mm Film roll width at the bottom: 2000 mm Packaged goods height (passage height): 650 mm Film roll diameter: 400 mm Hsdpfokn Rz Hex Abuow Compressed air: min 5 bar Compressed air consumption (per cycle): approx. 16 L swing arm with chain lift seal bar length 2100 mm "Siemens" control panel overall dimensions: 3000x2000x2300 mm Shrink tunnel: Manufacturer: Kuper ST/I-1400 year of manufacture: ca 1988 max capacity: width: 1350mm height: 650mm work length: 3000mm 2 pcs centrifugal fan blow-off units heating power: 59 kW temperature range 230 °C endless conveyor belt throughput speed 5 m/min Length: 3500 mm Width: 2350 mm Height: 1850 mm

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Manufacturer: REMUND AG (Switzerland) Type: Vacuum packaging machine Capacity: 1–4 bags/cycle Year of manufacture: 2002 Workstations: 2 Hjdpsz Hdbtofx Abusw Products: Cheese, meat, and other large-format food products Equipped with modified atmosphere packaging (MAP) PLC: Siemens S7 Condition: very good and fully functional

Condition: good (used), EKH-455 Shrink Wrapping machine Machine ready to use. Photos show the actual product. Description: The main advantages of shrink wrappers include simultaneous sealing and shrinking, small dimensions, and easy portability. They are an ideal solution for shops, bakeries, warehouses, archives, bookstores, etc. They offer adjustable sealing time and heater temperature, and can also shrink PVC and polyolefin films. Technical Specifications: Power Supply: 230 V Power: 3.77 kW Maximum Product Dimensions: 520 x 390 x 250 mm Hsdpfx Aboz R Iqusuew Sealer Dimensions: 550 x 420 mm Weight: 125 kg

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, We have a CMC PRATICA poly foil wrapping machine available. Year 2009, used. Configuration: 1 mail feeder shuttle, 3 rotary feeders, foil wrapping section, conveyor. Minimum: 100 x 120 mm. Maximum: 250 x 350 mm. Max mailpack thickness: 30 mm. Foil thickness: 20–100 microns. Maximum speed: 10,000 pieces per hour. Hjdpfx Asxlgp Tjbusw

Condition: used, Shrink wrapping machine Hsdpfxozg T Sqo Abuew Manufacturer: MIMI S.r.l. Model: TWIN Serial No.: 4461 Year of manufacture: 1988 Made in: Canelli (AT), Italy

Condition: used, Year of construction: 2009, machine/vehicle number: FA71, Technical Specifications & Performance DataThe SMI SK450 T is a shrink wrapping machine for PET bottles, designed for secondary packaging applications within a used bottling line. Manufactured in 2009, this second hand unit includes a heating oven for controlled shrink-film processing and bundle formation. It is configured for industrial packaging operations requiring stable, transport-ready bottle packs.Manufacturer: SMIModel: SK450 TYear of production: 2009Capacity: 45 packs/minuteContainer type: PET bottlesIncluded equipment: Heating ovenPackage configurations: 0.5L in 3x3, 0.75L in 2x3, and 1.5L in 2x3Advanced Automation & Control SystemsThis shrink wrapping machine is intended for coordinated operation in an industrial packaging environment, where bottle infeed, film handling, heat shrinking, and discharge must remain synchronized. Its operating setup supports repeatable bundle production for the stated PET bottle formats. Installation and commissioning should include verification of the existing control interface, electrical connection, conveyor synchronization, and heating-oven operating parameters.Production Line Integration CapabilitiesThe SK450 T can be positioned downstream of filling, capping, labeling, or accumulation equipment to create multipacks for distribution. In a beverage production line, shrink wrapping provides a practical secondary-packaging stage between bottle handling and palletizing. The machine is suited to PET bottle bundles in 3x3 and 2x3 arrangements, allowing the line to handle the documented 0.5L, 0.75L, and 1.5L formats.For integration into a used bottling line, upstream and downstream conveyors should be matched to the machine's infeed and discharge flow. The heating oven forms part of the packaging process and should be assessed together with film transport components, bottle guides, and pack transfer arrangements during installation planning.Machine Condition & Maintenance HistoryThe machine is in production and remains operational until 30 September 2026. It is described as being in very good condition, with regular maintenance and extensive annual overhauls carried out by the manufacturer. This maintenance history is relevant for buyers seeking second hand bottling equipment with documented attention to operational continuity and packaging performance.Operational Performance & VersatilityWith a stated output of 45 packs per minute, the SMI SK450 T supports efficient shrink-film bundling of PET bottles for industrial packaging. The documented pack patterns provide flexibility for common beverage production formats, including compact 0.5L bundles and larger 0.75L and 1.5L bottle configurations. Shrink wrapping helps produce stable multipacks suitable for handling, storage, and onward palletizing.Installation Requirements & Site PreparationSite preparation should provide sufficient space for the shrink wrapper, heating oven, safe material flow, and access for operation and maintenance. The installation layout should account for bottle conveyors, film supply, bundle discharge, and connection to downstream packaging machinery. Electrical services and any required line utilities should be checked... Hedpoztwl Iofx Abuew

Condition: like new (used), Year of construction: 2009, functionality: fully functional, ASCO APM 40 Automatic Dry Ice Block & Slice Wrapping Machine. For sale: a used ASCO APM 40 automatic wrapping machine, specifically designed for wrapping dry ice blocks and slices. The machine is in fully functional condition. Product-contact parts are made of stainless steel. It features automatic conveyor pitch adjustment, torque-controlled motors, and electronically controlled sealing temperature, displayed on the screen. The control panel includes visual alarms and a self-diagnostic function. Technical specifications: - Manufacturer: ASCO - Model: APM 40 - Year of manufacture: 2009 Hodjzxgglepfx Abuew - Condition: Used, fully functional - Working speed: Up to 25 wraps per minute - Film speed: Up to 25 meters per minute - Maximum wrapping width: 250 mm - Maximum wrapping height: 60 mm - Wrapping lengths: 40–260 mm, 140–580 mm, or 200–800 mm - Compressed air: 4–5 bar - Standard version: Right-hand operation - Location: Noordwijkerhout, Netherlands Suitable for dry ice producers and suppliers who want to automatically wrap dry ice blocks or slices. Contact us for more information. ASCO APM 40, ASCO APM40, ASCO automatic wrapping machine, ASCO dry ice wrapping machine, dry ice block wrapping machine, dry ice slice wrapping machine, dry ice disc wrapping machine, dry ice packaging machine, dry ice block packaging machine, dry ice slice packaging machine, automatic dry ice wrapper, dry ice block wrapper, dry ice slice wrapper, dry ice packaging equipment, dry ice wrapping equipment, dry ice film wrapping machine, dry ice block packer, dry ice packaging line, industrial dry ice packaging machine, used dry ice wrapping machine, used ASCO wrapping machine, dry ice CO2 block wrapping machine. Cold Jet dry ice machine for sale, dry ice machine for sale, dry ice blasting machine for sale, buy dry ice blasting machine, dry ice blaster for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, used dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, paint removal dry ice, coating removal dry ice, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high-pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice.

Condition: used, Offered for sale is an automatic shrink-wrapping system with film feed and shrink tunnel. Control system: Siemens SIMATIC HMI operator panel with display and emergency stop button. Equipped with film roll holder, film guide, protected packaging area, material support table, conveyor section, side safety guards with access doors, separate shrink tunnel with roller conveyor and extraction unit. Inspection possible by arrangement. Hodpoz N E U Iofx Abuew

Condition: used, Traysealer Multivac T350 These Multivac T-350 tray sealers are ideally suited for packaging food, medical, and pharmaceutical products. The automatic tray sealer achieves up to 6 cycles per minute, providing high production capacity. This sealing machine can process various types of trays, including plastic (PE, PP, PET), aluminum, and foam trays. The tray sealer can perform sealing, vacuum packaging, and MAP packaging (gas flushing). It is an ideal packaging machine for meat, fish, game, poultry, cheese, pet food, baby food, and other products. The machine is completely manufactured from stainless steel. Production capacity: 6 cycles/min Functions: sealing, vacuum, MAP gas flushing Hsdpfx Abszulkhjuow Equipped with: 2-compartment format: (2x) 158 x 125 mm Optional: Busch vacuum pump, 160 m³/h Voltage: 400 V (3 + N, 50 Hz) Power: 7.5 kW Dimensions (W x D x H): 3870 x 1150 x 2050 mm

Condition: used, Year of construction: 2002, Machine for cartoning glass bottles, for packing the carton packages on trays with subsequent shrink film wrapping. Additional title: Five‑step machine Capacity: 26000 bo/min when packing 24 x 0.33 litre bottles Cycle time: 18 cycles/min when packing 24 x 0.33 litre bottles Hodpey Nm Ruofx Abujw Formats: Trays with 4 x six-packs or 3 x eight-packs for 0.33 litre bottles, boxes with 20 x 0.5 litre bottles also possible Features: Tray erector/adhesive application (Nordson ‘Problue Flex’, built in 2021), carton packer, tray packer, shrink film machine, drying tunnel, date coding (best-before date marking)

Condition: like new (used), Year of construction: 2003, functionality: fully functional, 30 packs/min – Siemens Simatic OP7 Shrink wrapping and bundling machine suitable for cosmetics and small packaged products. The machine forms bundles and wraps them in film, followed by a shrink tunnel for tight packaging. Equipped with upper and lower film reels and a manual film splicing system. The shrink tunnel features a cooling section at the exit and adjustable speed control. The machine accommodates different product and bundle formats and is supplied with documentation. Maximum output: 30 packs/min Hinge chain conveyor width: 80 mm Shrink tunnel conveyor width: 480 mm Control panel: Siemens Simatic OP7 Film system: Upper and lower film reels with manual splicing Shrink tunnel: With cooling section at the exit Speed control: Adjustable Product size (min / max) Length: 50 – 100 mm Height: 100 – 300 mm Width: 25 – 60 mm Bundle size (min / max) Hedpfxjyt Hiqe Abujw Length: 75 – 330 mm Height: 100 – 300 mm Width: 50 – 100 mm Additional information Overfeed system included Upper and lower film roll holders Documentation available

Condition: excellent (used), Year of construction: 2015, Robopac Athena Combi 5545 automatic shrink film wrapping machine The Athena Combi automatic shrink wrapping machine is based on technologies of high-end industrial machines. Due to continuous product development and research, Athena Combi provides great performance, versatility, and user-friendly interface. Because of the outstanding adaptability and accuracy of the machine, makes it possible to use high range of materials for shrink filming. The equipment meets the most stringent safety standards as well. Manufacturer: Robopac Model: Athena Combi 5545 Year: 2015 Sealing bar dimensions LxW: 550x450 mm Max. product height: 120 mm Min. Product dimensions LxWxH: 50x20x20 mm Capacity: 30-35 packages/minute Hedjv D Ezispfx Abuow Max. product weight: 120 kg. Power: 400V / 12kW / 50-60Hz Machine Dimensions LxWxH: 2.700x1.200x1.500 mm Machine Weight: 600 kg.

Year of construction: 2002, condition: ready for operation (used), Output: 30-50/min, connected load: 20kW, length: 9500mm, width: 3500mm, height: 2200mm, including documentation. Hodpfx Aoh Rykuebujw

Condition: used, Year of construction: 2011, Supply voltage: 400V, Frequency: 50Hz, Current consumption: 60A, Power: 38kW, Auxiliary voltage: 110V AC. The system was in operation from 2012 to 2017 and is currently dismantled. The machine is in very good used condition. An on-site inspection is possible by appointment. Hodpfx Abs Aalnnjusw