Used Sinumerik 810 D for sale (46,100)

Condition: ready for operation (used), Siemens SINUMERIK 810 TFT Monitor LCD84-0019b, serial number S7999, used, in good condition, fully functional, delivery as shown in photos. Fsdpfx Aaoz Acr Eenjpp

Condition: good (used), 1 used hardness tester Fedexup Uwjpfx Aanopp Manufacturer: Mitutoyo Model: Wizard 810 208 D Testing methods: Rockwell Brinell

Condition: used, Year of construction: 2009, functionality: limited functionality, turning diameter over cross slide: 830 mm, turning length: 1,250 mm, turning diameter: 580 mm, spindle bore: 103 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 8 rpm, Equipment: rotational speed infinitely variable, Complete CNC component set Siemens 802 D – bed and guide rails ground Description: CNC component set / machine construction kit with Siemens Sinumerik 802D control. The machine is in an advanced state of reconstruction. Sold as pictured as a DIY project for completion. All components are present. Key highlights: • Mechanics: The machine bed and support have already been freshly ground and painted in RAL 5015. • Geometry: The mechanical geometry has already been professionally restored (optimal basis for high precision). • Control: Includes a functional Siemens Sinumerik 802D CNC control. • Feed drive SIEMENS, main motor regulator from Siemens • Completeness: All related parts and assemblies are in stock and ready. Perfectly suited for the reconstruction of a precise CNC machine. Sold ex-works as inspected, without warranty. Fjdpoy Sub Hsfx Aanjpp Technical data of the metal lathe MEXPOL TUB 830 C in the condition it was in before being disassembled: • Maximum turning diameter over bed: 830 mm • Maximum turning diameter over slide: 580 mm • Maximum bar diameter: 103 mm • Maximum turning length between centers: 1250 mm • Rapid traverse rate in X/Z axis: 10 m/min • Spindle speed range: 8–2000 rpm • Number of steps for adjusting the spindle speed: 3 • Diameter of the front spindle bearing: 140 mm • Power of the spindle drive: 15 kW • Maximum spindle torque: 2100 Nm • Bed width: 520 mm • Height of the centers above the bed guides: 420 mm • Diameter of the tailstock quill: 105 mm • Extension of the tailstock quill: 200 mm • Taper of the tailstock quill: Morse 6 • Drive of the X-axis: SIEMENS motor (torque X-axis: 11 Nm) • Drive of the Z-axis: SIEMENS motor (torque Z-axis: 18 Nm) • Coolant pump capacity: 25 l/min • Power of the coolant pump motor: 0.18 kW • Speed of the coolant pump motor (50 Hz): 2800 rpm • Installed power: 22 kW • Power supply: 3x 400 V; 50 Hz Equipment of the lathe TUB 830C: • CNC control: SIEMENS SINUMERIK 802D Sales and delivery conditions: • Loading: Loading onto your transport vehicle is included in the price. • Delivery: Ex-works Hilden. • Validity: The offer is subject to change – subject to prior sale (valid only while stocks last).

Condition: used, Horizontal machining center with 2-fold shuttle table STEINEL type BFZ 5 with CNC control SIEMENS Sinumerik 810 M serial no. 34 year of construction 1988 Travel X: 500 mm, Y: 400 mm, Z: 320 mm Clamping surface, table surface 500 x 400 mm Tool holder ISO 40 Spindle speed max. 6300 rpm infinitely variable Main spindle drive 12 kW Mains connection 380 Volt, 50 Hz, 30 kVA - Tool changer with 24 tool positions - Changing table with 2 stations - Interface for data transfer - Coolant unit with chip conveyor Space requirement L x W x H 4100 x 2500 x 2650 mm Weight approx. 8 tons good condition Fodeutuyispfx Aanspp Transport dimensions: Machine L x W x H 3200 x 2500 x 2650 mm, approx. 7.5 tons. Chip conveyor L x W x H 3500 x 1100 x 2100 mm, approx. 600 kg

Condition: ready for operation (used), Siemens control panel Sinumerik 8 MS421-D, used, normal signs of use, 100% functional, scope of delivery as per photos. Fpsdpfezzhmlex Aanjp

Condition: ready for operation (used), Siemens 6FX1136-2BA01 SINUMERIK 810 MPC interface module, used, normal signs of use, 100% functional, scope of delivery as per photos Fedpfxexagp Ne Aanopp

Condition: refurbished (used), 1. Machine Specifications * 2 work tables with automatic pallet changer - Clamping area 400 x 400 mm - Perforated pallets - Max. clamping weight 400 kg - NC rotary table - Rotatable clamping position Fodpfoz H Tn Aex Aanspp * Travel ranges - Column longitudinal travel (x) 650 mm - Support vertical travel (y) 500 mm - Table transverse travel (z) 650 mm * Max. feed rate 36 m/min * Rapid traverse 40 m/min * Working spindle - Tool interface - SK 40 DIN 69871 - Drive power 24 kW AC - Torque 230 Nm - Speed range, stepless 0 ... 10000 rpm * Coolant supply through the spindle center 50 bar * Tool magazine 60 positions * Control system Sinumerik 840 D * Machine bed made of mineral cast * Enclosed work area protection * Chip conveyor * Paper band filter system 2. Technical Condition The machine was only used in production until February 2013! Due to the overhaul, the machine meets the acceptance conditions for new machines. - The machine was completely disassembled and cleaned. - All compact guides and ball screw drives were replaced. - The main drive motor and feed motors were inspected in authorized workshops and, if necessary, refurbished. - The main spindle body was replaced with a new one, the spindle was re-bearinged, and run-in on the test stand. - All cables, air lines, and defective sensors were replaced. - Table assembly, magazine, tool changer, and coolant system were overhauled. - The panes of the work area protection were renewed, and a new paint job was applied. In addition, a new main spindle and a new Kessler motor can be supplied as spare parts. 3. Warranty: last inspection 03/2013; 3 months 4. Prices: * Machine €110,000.00 * Installation/Commissioning €6,000.00 (for installation/commissioning abroad, travel costs will be added) 5. Delivery Conditions: * Pricing: Prices are quoted net for delivery or service ex works. We reserve the right to sell the machine in the interim. Our delivery and service terms and conditions apply. * Payment terms: 30% down payment upon order against invoice 60% upon delivery 10% upon handover * Delivery time: 4 weeks

Condition: ready for operation (used), Siemens 6FX1114-5AA00 Sinumerik 8 interface for external PLC S5, version D, used, minor signs of wear, 100% functional, scope of delivery as shown in the photos. Fpjdsi Ed Nmspfx Aanjp

Condition: ready for operation (used), Siemens 6FC5110-0BA01-1AA0 Sinumerik NC CPU card 580 231 9101.01 E, version D / 570 521 9101.00 E, version A, used, 100% functional. Fpodpfoi Edx Ssx Aanep

Condition: good (used), CNC control, operator panel, LCD SIEMENS SINUMERIK 810 -Manufacturer: Siemens -Type: Sinumerik 810 M -Dimensions: 420/280/H350 mm -Weight: 9.7 kg Fpjdsdpg T Ropfx Aanop

Condition: used, functionality: fully functional, input voltage: 24 V, Siemens SINUMERIK OP 015 black 15.6-inch operator panel – 6FC5303-0AF14-0AA0 Industrial operator panel front with a capacitive touchscreen, integrated keypad, and thin-client function for SINUMERIK CNC controls. Manufacturer: Siemens Product series: SINUMERIK Model: OP 015 black Article number: 6FC5303-0AF14-0AA0 Device type: CNC operator panel front / Operator Panel Screen diagonal: 15.6 inches (39.6 cm) Display type: LCD color display Aspect ratio: Widescreen Resolution: 1366 x 768 pixels Touch technology: Capacitive multi-touch Operation: Multi-touch and integrated capacitive keypad Keypad: Alpha, numeric, cursor, and control keys Control interface: Integrated TCU (Thin Client Unit) Network interface: Ethernet 10/100/1000 Mbps USB ports: 3 x USB on the rear Communication: Ethernet connection to PCU/NCU Supply voltage: 24 V DC Power consumption: Typical 24 W, maximum 42 W Protection rating (front): IP65/IP66 Protection rating (rear): IP20 Operating temperature (front): 0 to +45 °C Operating temperature (rear): 0 to +55 °C Dimensions (W x H x D): 483 x 310 x 48 mm Installation depth: 37 mm Mounting cutout (W x H): 450 x 290 mm Permissible mounting panel thickness: 1.5–6 mm Weight: Approx. 7 kg Fpodpfxo Ah Exlj Aanjp Mounting type: Panel mounting with rear-mounted clamping elements Condition: Used

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, HÖFFMANN DÜBELFIX DBL Dowel and Slot Drilling Machine In very good condition, this machine comes from a small carpentry shop, and everything is in its original condition; it has only been cleaned. It can be used to mill slots and drill dowel holes on two levels without reclamping. 380V, 1500W Speed: 2850 rpm Year of manufacture: 1991 With this machine, you can mill slots for, e.g., lock boxes and similar items, and produce all types of frame dowel joints at right angles, butt joints, and miter joints. Ideal for the production of dowel joints in timber frame construction, furniture, door, window, and staircase construction, and for similar applications. Drilling on two levels, the grid and stops, and the machine's design allow dowel joints to be produced in a very short time, making the machine very economical. The machine requires a compressed air connection of 6 bar (the air consumption is very low). Rotates clockwise. Mills and drills very well and cleanly. Comes with 2 angle stops integrated into the machine table and 2 additional stops on the left and right outside of the table. Additionally, you will receive a round stop rail, 2000mm long with a folding stop. This stop rail can be used on both sides, and when switching from one side to the other, the folding stop does not need to be readjusted. The workpiece is clamped using 2 pneumatic clamping cylinders, and the switches are located directly on the clamping cylinders. The height adjustment from one drilling level to another is also pneumatic; the pneumatic switch for this is located at the top of the adjustment lever for the grid. This ensures a quick adjustment of the grids and the drilling levels. Comes with a precision 12mm grid rail, which has a center grid and 12 grids on the left and right. The 2 drilling levels each have a scale with a height indicator, making it easy, quick, and accurate to adjust the height of each drilling level. It can be quickly converted for slot milling; the machine can then be used without a grid with 2 adjustable stops on the left and right, and then has a working width of max. 320mm. The machine has a stop rail at the front of the machine table, which can be adjusted downwards if required. Fpsdpfx As Aiv T Hjansp The max. drilling hole height is approx. 150mm. The max. drilling hole depth is approx. 120mm, with a drilling depth stop. The max. workpiece height is approx. 250mm. Everything is in perfect working order. We will personally deliver and demonstrate the machine throughout Germany for 220.00 euros, so you have no risk when buying. Delivery to Austria and the EU is also possible upon request. The machine table is 800mm wide and 250mm deep. Professional equipment, not cheap DIY junk. Comes with instructions. You can start working with the machine immediately. Comes with a 2-jaw drill chuck up to 20mm. Very stable and durable construction. The precision guides with play-free ball bearing bushes are in good condition and move smoothly. Very stable and rigid design.

Condition: excellent (used), Year of construction: 2019, Duplo DuSense DDC-810 coating and embellishment machine year 2019 - first installation 2021 very good condition - sparingly used counter reading only 25,000 sheets covered by a maintenance contract until 2026 - latest software corona unit Fodozy Na Repfx Aanopp

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 01/2015, total width: 2,470 mm, suspension: air, color: black, General information Year of construction: 2015 Registration number: ON-16-NY Axle configuration Make axles: BPW Brakes: drum brakes Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Weights Empty weight: 4.962 kg Carrying capacity: 38.038 kg GVW: 43.000 kg Condition Technical condition: good Visual appearance: good Fpsdj Ahr Efepfx Aanop Additional information Please contact Arie or Pedro for more information = Additional options and accessories = - Air suspension - EBS - Extandable - Lift axle - Twist-locks = Remarks = D-tec FT-LS-S / 3x Extendable / BPW / 1x Lift Axle

Condition: used, As-new CNC chuck lathe TAIKAN model HPT 08-380 Serial No. 2015122 Year of manufacture: 2017 CNC path control: SIEMENS Sinumerik 828 D Basic Maximum turning length without chuck: 350 mm Maximum turning length with chuck: approx. 300 mm Turning diameter (nominal): 250 mm Swing diameter over bed: 500 mm Travel of Z-axis: 385 mm Travel of X-axis: 200 mm Feed rate (X + Z): 1–8000 mm/sec. Rapid traverse (X): 30,000 mm/sec. Rapid traverse (Z): 36,000 mm/sec. Spindle speed, max.: 4500 rpm Spindle bore: 66 mm Draw tube bore: 50 mm Spindle nose: presumably A2-6 Workpiece weight incl. chuck: max. 200 kg Spindle drive motor power: 11 kW Power supply: 400 Volt, 50 Hz - Electronic handwheel - USB, LAN data interface + CF card - Drum turret with 12 tool stations - Hydraulic 3-jaw power chuck, Ø 215 mm - Infinitely variable spindle speed - Coolant unit Fpodpfx Aajwz Rifonop - Chip conveyor with rear discharge + basic chip cart Machine footprint with chip conveyor: Length 2200 mm x Depth 2750 mm x Height 1700 mm Machine space requirement: Length 2200 mm x Depth 1750 mm x Height 1700 mm Chip conveyor dimensions: Length 2700 mm x Width 600 mm x Height 1400 mm Weight: 3.5 t Very good condition – as new Machine comes from a showroom and has only a few operating hours.

Condition: used, axle configuration: > 3 axles, first registration: 12/2005, total length: 12,590 mm, total width: 2,500 mm, suspension: air, tire size: 385/55 R 22.5, wheelbase: 9,860 mm, Equipment: ABS, = Additional Options and Accessories = - Lift axle - Air suspension = Further Information = Axle configuration Tire size: 385/55 R 22.5 Axle brand: BPW Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Tire tread depth left: 45%; Tire tread depth right: 45% Rear axle 2: Steerable; Tire tread depth left: 30%; Tire tread depth right: 30% Rear axle 3: Tire tread depth left: 60%; Tire tread depth right: 60% Fpjdpfx Ajz R Diteanjp Rear axle 4: Tire tread depth left: 60%; Tire tread depth right: 60% Weights Unladen weight: 7,500 kg Payload: 45,500 kg GVW: 53,000 kg Condition Damage: none Identification License plate: OJ-17-DH

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 11/2004, total width: 2,470 mm, color: blue, General information Year of construction: 2004 Registration number: OH-37-SJ Axle configuration Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Weights Empty weight: 5.300 kg Carrying capacity: 37.700 kg GVW: 43.000 kg Condition Technical condition: good Fjdpfxoz D E Ive Aanepp Visual appearance: good Additional information Please contact Arie or Pedro for more information = Additional options and accessories = - Air suspension - Extandable - Lift axle - Twist-locks = Remarks = D-tec FT-43-03V / 3x Extendable / 1x Lift Axle / BPW

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 11/2014, total width: 2,470 mm, suspension: air, tire size: 385/55R22.5, color: black, General information Year of construction: 2014 Registration number: ON-83-LL Axle configuration Tyre size: 385/55R22.5 Make axles: BPW Brakes: drum brakes Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Fpedpfxezzyado Aansp Weights Empty weight: 4.962 kg Carrying capacity: 38.038 kg GVW: 43.000 kg Condition Technical condition: good Visual appearance: good Additional information Please contact Arie or Pedro for more information = Additional options and accessories = - Air suspension - EBS - Extandable - Lift axle - Twist-locks = Remarks = D-TEC Flexitrailer 2014 3x uitschuifbaar: voor, midden en achter

Condition: used, PLC, control panel, operator panel, control machine Fsdpfxjdpmmys Aanjpp -Handover in the current state (broken glass) -The device is sold as working -Manufacturer: SIEMENS -Type: Sinumerik 810D/840D PCU50 -Dimensions: 482/310/H140 mm -Weight: 11.5 kg

Year of construction: 2017, condition: ready for operation (used), overall weight: 380 kg, Turntable manufactured in 2017. This EXPERT EDX810/0250/8 is part of a system and has a machine weight of 380 kg. If you are looking to get a turntable, consider the EXPERT EDX810/0250/8 machine we have for sale. Contact us for further details. 4 units available Technical Data • Machine Type: Turntable • Indexing Angle: 8 × 45° • Index Time: 2.02 sec. • Transport Time: 1.79 sec. • Motor Voltage: 400 V • Motor Frequency: 50 Hz • Motor Power: 0.75 kW • Brake Voltage: 400 V • Braking Torque: 10 Nm • Operating Mode: SEW II.c • Dimension Sheet: A9681 • Noise Emission: < 75 dB(A) • Turntable / Drum Drive: Turntable configuration • Rotation Direction: Forward / Backward • Number of Speeds: 1 Fjdpfxjz Ap Hvj Aanspp • Activation: Direct

Condition: good (used), axle configuration: 3 axles, first registration: 06/2019, suspension: air, color: red, Year of construction: 2019 Make axles: JOST Empty weight: 5.600 kg Carrying capacity: 33.400 kg GVW: 39.000 kg Technical condition: good Visual appearance: good Please contact Arie or Pedro for more information = Additional options and accessories = - Air suspension - Disc brakes - EBS Fedpsz Izr Eefx Aanjpp - Extandable - Lift axle - Twist-locks = Remarks = A&D LPRS24 / 2x Extendable / 1x Lift Axle / Disc Brakes

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, type of input current: AC, input voltage: 400 V, D&K PROTEUS fully automated B1 laminating machine. Production speed: 35 m/min. Max sheet size: 760 x 1050mm. Fjdpfxsz D Uane Aanepp Min sheet size: 210 x 220mm. Stock range: 115 - 600gsm. Jogger delivery

Condition: ready for operation (used), Siemens Sinumerik 828D PPU28 1.3, 6FC5370-7AA30-0AA1, CNC hardware, version 02, serial number ZVJ7XWV000980, used, in good condition, 100% functional, scope of delivery as shown in the photos. Fpodj Aiaiiepfx Aanop

Condition: excellent (used), functionality: fully functional, Swivel spindle milling machine KÖLLE F 45 in very good condition; this machine comes from an assembly company and has been idle for the last few years, as it was no longer needed. Everything functions perfectly. All bearings and guides are in good condition; the machine runs very smoothly. Year of manufacture: 1990 with control panel on top Both fence jaws on the milling fence can be adjusted in depth, with fine adjustment and scale, allowing for planing work, e.g., on a gluing profile. The entire milling fence can also be adjusted in depth using a handwheel and a leadscrew, enabling very precise and fast adjustments. with AIGNER integral fence with spindle locking lever Chips can be removed very effectively with 2 extraction ports, 125 mm on the milling fence and 100 mm on the machine table. with 30 mm spindle, which can be swiveled steplessly from -5 to 45°; the spindle is swiveled electrically with a very precise display; fine adjustment can be made manually with a handwheel. The height adjustment is also electric, and a handwheel is also available for fine adjustment. with right/left rotation We will personally deliver and demonstrate the machine anywhere in Germany for €220.00, so you have no risk when purchasing; shipping to Austria and the rest of the EU is also possible upon request. with a large table opening of 375 mm, which can be reduced by using various rings (this allows for the use of cutters with a very large diameter, and you can also safely mill with small cutters). with 3000, 4000, 5000, 6000, 8000 and 10000 rpm the table is made of heavily ribbed cast iron with 30 mm spindle in the machine; another spindle can also be installed very robust and durable design; the machine was built for heavy-duty milling operations and is suitable for all milling applications. optimal power transmission through belt drive with instruction manual with 3-roller feed system HOL HER, type ET 117 the feed system has right/left rotation and 8 speeds; the feed rollers are individually mounted and are all in new condition. the machine table is 1000 mm deep and 1200 mm wide; it has an extendable support table 1200 mm long. the machine is ready for immediate use. 380 V, 4700 and 5700 W due to the 2 speeds with all necessary safety devices, motor brake, and emergency stop switch; the machine is approved by the German Wood Trade Association (Holz-BG) and has the GS safety mark. the machine weighs approximately 1000 kg with motor protection switch against overload professional-grade machine, not a hardware store reject Fjdpfxszt Ai Ej Aanopp optimal, simple, fast, and safe operation

Condition: used, SIEMENS SINUMERIK HANDWHEEL HT6 HANDHELD Condition: Used (working), incl. 3-day functional guarantee after receipt of Fedpfx Aaeyl Aaijnepp the goods. receipt of the goods.