Used Size Press for sale (29,113)

Condition: ready for operation (used), Year of construction: 1968, A mechanical Karges-Hammer eccentric press for series production in can manufacturing is available. Ram stroke: 75mm, flywheel speed: 80rpm, motor power: 3HP, speed: 294rpm. An on-site inspection is possible. Lrjdpfxoy Ndfpo Afwsr

Year of construction: 1990, condition: ready for operation (used), Press force: 100t, throat depth: 320mm, table dimensions X/Y: 850mm/610mm, ram dimensions X/Y: 600mm/355mm, stroke range: 10mm-130mm, ram adjustment: 80mm, stroke rate: 56rpm, installation height: 300mm, machine dimensions X/Y/Z: approx. 1900mm/1900mm/3150mm, weight: approx. 9000kg. On-site inspection is possible. Lrodsyiflmopfx Afwsr

Year of construction: 2005, condition: ready for operation (used), Clearance between the frames: 890mm, throat depth: 200mm, bending width: 1000mm, press force: 280kN, connected load: 5.5kVA, required fuse protection: 3x 16A, weight: 3.5t. An inspection on site is possible. Lredpfezbb R Ejx Afwer

Year of construction: 1971, condition: ready for operation (used), Max. stroke: 100mm, max. press force: 50t, max. oil pressure: 300kg/cm², motor power: 5.5hp, approx. 4kW, pump: Gury 6-16. An inspection on site is possible. Lodpszbb R Sefx Afwjrr

Condition: ready for operation (used), Year of construction: 2010, An Inotec spindle press for rolling and forming sheet metal bodies of various sizes is available. Safety distance: 350mm, max. product diameter: 350mm, control system: PLC, weight: approx. 1800kg. Including pressure plate magazine and various tool sets. Documentation available. An on-site inspection is possible. Lodpfxozbuvhs Afworr

Condition: ready for operation (used), Year of construction: 1990, Punching width: 500mm, rated current: 20A, control voltage: 220V, weight: 2.5t. No defects known, regularly maintained, operating hours unknown. With punching tools and punching blade, only little documentation available. An on-site inspection is possible. Lredpfx Aew U T Ucefwsr

Year of construction: 2012, condition: ready for operation (used), A Sahinler workshop press is available. Press pressure: 150t, max. pressure: 244bar, working width: 1520mm, piston stroke: 300mm, ram dimensions X/Y: 200mm/1520mm, through hole: 100mm, table dimensions X/Y: 600mm/1520mm, max. installation height: 610mm. Forward speed: 9mm/s, retraction speed: 10mm/s, working speed: 5mm/s, drive power: 11kW. Machine dimensions X/Y/Z: approx. 2500mm/1000mm/2400mm, weight: approx. 3000kg. Documentation available. On-site inspection is possible. Ledpsv N I Agofx Afwerr

Year of construction: 2018, condition: ready for operation (used), A dismantled Mecamaq hydraulic press is available. Pressing force: 100t, max. pressure: 290bar, main piston diameter: 200mm/120mm, auxiliary cylinder diameter: 40mm/25mm. Main cylinder working stroke: 500mm, max. installation height: 800mm, working height: 800mm, effective dimensions X/Y: 700mm/500mm, table dimensions X/Y: 800mm/500mm, working speed: 6mm/s, return speed: 150mm/s. Max. tool dimensions X/Y: 800mm/600mm, max. tool weight: 1000kg. Machine dimensions X/Y/Z: approx. 1000mm/1350mm/2750mm, weight: approx. 4000kg. Documentation available. On-site inspection is possible. Ljdpfx Aswkiiiofworr

Condition: used, Year of construction: 2013, total length: 3,050 mm, total width: 1,650 mm, total height: 2,350 mm, Colour: Grey Weight: 5.690 kg - Year: 2013 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 7304138524 Lrodpfxezbhy To Afwor - Drive system: CNC - Control system brand: Durma - Power [kW]: 7.5 - Number of axes [pcs]: 3: Y1+Y2+X - Press force [ton]: 60 - Max. working width [mm]: 2050 - Column gap [mm]: 1720 - Backgauge depth [mm]: 800 - Crowning system: Mechanical - Tools included: Yes - Options: Digital readout - Transport dimensions: 3050mm x 1650mm x 2350mm (l x w x h) - Transport weight [kg]: 5690kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Hydraulic workshop press, keyway milling press, groove milling press Hydraulic workshop press, custom-built, MaVo type 5t-20 Used for milling keyway grooves in through-holes. Pressing force: 5 tons (at 100 bar hydraulic pressure) Stand width: 770 mm Cylinder stroke: 220 mm Distance from threaded piston rod to table traverse: max. 900 mm Pressing speed, ram downwards: approx. 11.5 mm/sec. = 220 mm in 19 sec. Pressing speed, ram upwards: approx. 24.5 mm/sec. = 220 mm in 9 sec. Motor power: 5.5 kW Mains connection: 400 volts, 50 Hz - 2-hand control (one button for pump on, 1 button for downwards, 1 button for upwards) - Hydraulic pump HAWE, type K5/3 (can also deliver 400 bar, but the pump is very loud) - Threaded connection on the piston rod: M42 x 1.5 mm external thread - 1 screw-in extension, approx. 290 mm for the piston rod with M42 x 1.5 mm internal thread - 1 screw-in extension, approx. 250 mm for the piston rod with M42 x 1.5 mm internal thread - 2 ram extensions for insertion into the screw-in extension, 110 and 130 mm length Lrsdpewki Apofx Afwor - 2 support plates - Very stable steel construction made of 140 series double T-beams - Estimated load-bearing capacity of the steel construction: 40 tons or more - Can be moved with a pallet truck Space requirement L x W x H: 1200 x 930 x 2280 mm Weight: 485 kg

Condition: refurbished (used), Year of construction: 1998, overall weight: 33,000 kg, working width: 4,300 mm, HACO hydraulic press brake, Pressmaster 43230 model Ljdpjzqabasfx Afwerr 4.3 m x 230 tons Retrofit with new Easybend 2DT touch-screen CNC control X-axis back gauge with ball screw Manual crowning table 2 adjustable front supports Machine designed for standard European tooling

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 09/2027, type of input current: three-phase, Roll divider WP Rotamat EN Dough divider and rounding machine Stationary machine, 30 portions, Lredpfx Afszq Uw Nower ideally suited for dividing and rounding dough with plastic knife head, connection 400 V, 16A-CEE plug, dimensions: 650 x 670 x 1610 mm, W x D x H Used machine

Condition: good (used), Year of construction: 2003, Amada HFP 100-3L (long stroke) 8-axis press brake Year: 2003 Tonnage: 100 tons Max. Bending length: 3110 mm Standard stroke: 350 mm Approach speed: 100 mm/sec Bending speed: 10 mm/sec Return speed: 100 mm/sec Weight: 7100 kg Dimensions Machine length: 4498 mm Machine width: 2450 mm Beam width: 60 mm Distance between side frames: 2705 mm Machine height: 2860 mm Open height: 620 mm CNC control type: AMNC Display: Touchscreen Akas laser protection Controlled axes: 8 axes, Y1, Y2, X1, X2, R1, R2, Z1, Z2 Lrsdpevn S I Dsfx Afwjr Documentation available Digipro angle measuring system Supplied with 1 set of tools

Year of construction: 2021, condition: new, pressing force: 50 t, Here are the technical data of the offered machine: If the press does not exactly meet your requirement profile, please click to request an individual offer exactly according to your needs: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your requirements at surprisingly low prices! Technical data + information: Lsdpfx Afjgrkigjwjrr hydraulic 50 T heating press for laboratories It is a lower piston press with an open height of 400 mm ram travel 300 mm heating platen capacity up to 250 degrees heating plate size 200x200mm weight about 1500 kg height 1950 mm hydraulics built in the press body Hydraulic tank with 100 l monitored vertical door for the press chamber pressure, position - and speed adjustable via SIEMENS S 7 1200 SIEMENS touch screen monitor with 9 inch Safety technology from SICK (C-press, hydraulic press, hydraulic press, laboratory press, laboratory) Are you looking for a custom-fit machine? Contact us for an individual offer. Our hydraulic presses are manufactured according to German machinery directives, as well as European machinery directives (Directive 2006/42/EC), EC standards and EU safety regulations. Furthermore our presses exceed the Canadian and European safety requirements, because they correspond in all points to the national Brazilian safety guideline NR 12, which is based on these. Our great strength is the special machine construction and the press automation. We sell customized hydraulic presses, press brakes and impact shears at surprisingly low prices. For the hydraulics of the presses we mainly use components of leading European manufacturers.

Condition: used, Heavy-duty hydraulic strip or beam press, Wemhöner Type VS 4 S, for veneering strips, gluing timber or other pressing tasks. The press has four independently controllable pressing surfaces. Includes dismantling and loading. Fixed loading date: 15 June 2026. Glue applicator also available. Technical data: Lsdpfxszryzcj Afwsrr - Working length: 3,090 mm - Pressure: max. 104 t

Condition: as good as new (ex-display), Year of construction: 2025, pressure 150 t stroke 300 mm table surface area 1070 x 290 mm column travel between the guideways 1070 mm ajustment speed 9.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec engine output 11.0 kW weight of the machine ca. 1870 kg. range L-W-H 2200 x 1300 x 2300 mm Exhibition machine from 2025 with only approximately 2 operating hours Condition as new Special price upon request Features: - Robust electro-hydraulic workshop press with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in . and out bolts, bearings, bushings, and much more. - Robust welded steel construction for heavy-duty use - Table height adjustment via piston rod Lrodsxaabfopfx Afwer * Includes round steel chain and 2 locking pins * Piston rod with metric mount - 1 set of V-block prism supports - Pressure gauge for pressure display - Simple manual control with: * 1 feed speed * 1 working speed * 1 retraction speed - Piston can be stopped in any position - Hydraulic tank permanently mounted on the side - Operating instructions

Condition: new, pressure 100 t stroke 300 mm table surface area 1070 x 315 mm column travel between the guideways 1070 mm ajustment speed 8.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec oil volume 90.0 l engine output 5.5 kW weight of the machine ca. 1870 kg. dimensions of the machine ca. 2050 x 1000 x 2200 mm Furnishing: - Robust electro-hydraulic workshop press, with adjustable cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod * including round steel chain and 2x locking bolts * Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: * 1x delivery speed * 1x working speed * 1x retreat speed - Piston can be stopped in any position Lrodpexaar Djfx Afwer - Hydraulic tank mounted on the side - Operation manual

Condition: used, Year of construction: 1998, machine/vehicle number: 1 / 2000, Pressure total: 2000 ton Lodpfxjyvz U Ie Afwjrr Ram stroke: 900 mm Slide adjustment: 800 mm Shut height (stroke down, adjustment up): 1800 mm Free frontal opening L-R: 5040 mm Distance between oil tray: 4840 mm Distance between the columns F - B: 2600 x 2400 mm Table surface area : 5000 x 2700 mm Slide area: 5000 x 2700 mm Die cushion capacity in table: 400 ton Die cushion stroke: 350 mm Die cushion pad area: 4200 x 2100 mm Cushion pressure in ram: 200 ton Ejector stroke in ram: 200 mm Number of strokes: 8 - 14 s.p.m. Required power: 350 kW Height over floor approx.: 11350 mm Die weight at the ram max.: 40000 kg Die Weight total: 80000 kg Weight of machine approx.: 580 ton Standard configuration Moving bolster front sidePin diameter 52 mmForce in microinches = 400 tA SIEMENS control system is installed The documentation is available.A packing list would be available, as an identical press has already been dismantled.

Condition: new, Filter plates (250 - 1200 mm) for all filter presses in all sizes and qualities, short delivery times, ask us Location is 58762 Altena Ljdpfx Aoikl Uijfwjrr

Condition: new, Filter cloths for all filter presses in all sizes and qualities, short delivery times, ask us Lrodpeg Azmmofx Afwjr Location is 58762 Altena

Condition: used, Year of construction: 2010, pressure 600 t distance between columns 3640 mm stroke fix 350 mm no. of strokes 11 - 44 /min dayligth (stroke and adjustment up) 1550 mm column travel -side 2200 mm table surface area 3600 x 2500 mm ram surface 3600 x 2500 mm ram adjustment 400 mm band width 2000 mm material thickness 0,6 - 2,5 mm material cross-cut 1600 x 2,5 mm² coil weight 35,0 t Number of Straightening rolls 13 0 straightening roll diameter 50 mm Blanking Line (press, coil line, blank stacking system) yom 1993 - 2010: new control Siemens S 7 - press Schuler type EBS 4-600 with infinitely variable drive, fly-wheel brake, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, ram interlocking moving tables (2x) without rails for the moving tables - decoiler make Schleicher, type HE - 355 - 2100, yom 1994 with auxiliary drive, snubber roll - coil lifting device - extractor device make Schleicher - shear - straightening machine make Schnutz, type RME 18/50/13-2000 TZ, yom 1994 with infinitely variable drive, 30 intermediate rolls, 117 supporting rolls - coil loop bridge - roll feed make Schleicher, type WV-SYS-A 160-2000, yom 1994 Lrodpfjzrppcsx Afwsr - blank stacker NSM-Magnettechnik stored in dismantled condition - Video before dismantling available

Condition: excellent (used), Year of construction: 2011, For the complete technical description, please download the PDF document or request it directly. Used laser/PU edge banding machine for batch size 1 Manufacturer: Homag / Bargstedt Year of manufacture: 2011 Lrsdpfx Ajzt N Egsfwjr Consisting of: Homag edge banding machine Power KFL610/21/PU/L/25/SI14 - Infeed system SI14 - Outfeed conveyor TF 11 Bargstedt gantry system Profi TBP410/40/28/12/S Bargstedt belt conveyor TFB100/021/12 Bargstedt roller conveyor TFR560/S/_/28/31/12 Bargstedt timing belt conveyor TFZ531/40/25 Bargstedt belt conveyor TFB100/041/12 Bargstedt gantry system Profi TBP410/40/28/12/S Bargstedt timing belt conveyor TFZ531/40/25 Bargstedt belt conveyor TFB100/041/12 Bargstedt chain lift buffer TPK400/30/12 Bargstedt belt conveyor TFB100/041/12 Bargstedt belt conveyor TFB100/031/12

Condition: good (used), operating hours: 4,313 h, power: 22 kW (29.91 HP), input voltage: 400 V, input frequency: 50 Hz, pressing force: 320 t, stroke length: 250 mm, operating speed: 7 mm/s, reverse speed: 70 mm/s, table width: 250 mm, table length: 6,100 mm, throat depth: 300 mm, distance table to ram: 500 mm, clearance between the columns: 5,500 mm, oil tank capacity: 350 l, overall weight: 26,000 kg, Max. pressing force: 320 t Bending length: 6100 mm Distance between uprights: 5500 mm Control system: MNC 95 c Maximum ram stroke: 250 mm Max. distance table/ram: 500 mm Overhang: 300 mm Table width: 250 mm Closing speed: 80 mm/s Working speed: 7 mm/s Return speed: 70 mm/s Oil capacity: 350 l Lredpfezvb Rmox Afwjr Operating hours: 4312 h Voltage: 380 V / 50 Hz Total power consumption: 22 kW Machine weight approx.: 26 t

Condition: refurbished (used), RETROFIT complete Pressing force: 1600 kN Installation height: 800 mm Stroke: 500 mm Table: 900 x 630 mm Ram: 750 x 450 mm Throat depth: 360 mm Downward speed: 200 mm Upward speed: 125 mm Machine height: approx. 3,500 mm Weight: approx. 7,000 kg Connection: 17 kW - a complete retrofit kit for unrestricted manual loading and unloading compliant with EC directives and CE equipment requirements, - new control cabinet with certified two-channel electronic PLC safety controller from Siemens (1512SP F or 1515F) for process control, featuring integrated control panel for the operating modes: setup with two-hand control, single stroke with two-hand control, and foot operation (only in combination with BWS); manual lever operation is no longer possible, - hydraulic safety block for monitoring the closing movement of the main cylinder, - position-monitored directional valve for the up and down movement of the ram of the main cylinder, - two-hand control device with two-channel monitoring of the two-hand synchronization at the press table (incl. 5m cable), - replacement of main and control pump motors, - replacement of seals on the main cylinder, - fine filter with contamination indicator, - the press is equipped with an electronic position measurement system (including teach-in function and display of the current ram position), eliminating the need for a mechanical cam switch. Main control panel integrated into the control cabinet (mounted on the right side of the machine): - 12" touch panel - Control buttons and switches for operating modes and drives - USB interface for data exchange Lrodpow S Uazsfx Afwsr - Light curtain Option: Drawing cushion

Condition: used, Year of construction: 2016, General technical data: Machine type: Flexographic printing press Web width: 430 mm Number of colors: 6 Equipment & Configuration: • 1-side tape cleaner • 1-side corona treatment • 3 die-cut stations • 2 gap master units Lrjdoyn Sb Ujpfx Afwsr • Delivery: reel or sheet with folding table • 6 UV IVT lamps • Turning bar • Delam/Relam unit – 1 color • 3 sets of sleeves • 6 anilox rollers • 3 magnetic cylinders