Used Size Press for sale (40,191)

Condition: used, all stainless steel Redpsx Apdzsfx Ah Ueck belt width 400 mm adjustable speed with outfeed belt mobile dimensions (l x w x h) : ± 2.200 x 800 x 1.500 mm

Condition: excellent (used), Technical data: Working length: 4100 mm Frame width: 3650 mm Press force: 220 t CNC Control: OPERATOR OPII graphic Color monitor size: 14" Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Motorized adjustable back gauge Rcjdpjx N Hw Isfx Ah Ujk Throat depth: 300 mm Stroke: 180 mm Automatic crowning Motor power: 17 kW Dimensions (L x W x H): approx. 4800 x 2300 x 2900 mm Weight: approx. 17 tons Accessories: New AMADA tools The seller assumes no liability for typographical or transmission errors. The machine’s appearance, technical condition, and wear are consistent with its age; used machines are sold without any warranty.

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,000 mm, filling opening length: 1,400 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 45 kW (61.18 HP), year of last overhaul: 2025, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Rjdpfx Asx A U Nceh Ueck Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed • Replacement of the counter blade, two-piece, in the frame • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode; see video for the machine function test.

Condition: good (used), AMADA PROMECAM APX 50.20 CNC 7 AXIS PRESS BRAKE MAKE AMADA MODEL PROMCAM APX 50.20 YEAR 1995 CONTROL OPERATEUR 2 Rsdpeuad Nfsfx Ah Ujck CAPACITY 50 TONS BENDING LENGTH 2050.0 mm OPEN HEIGHT 370.0 mm STROKE LENGTH 100.0 mm THROAT DEPTH 400.0 mm MOTOR POWER 9 KW TBC WEIGHT 6400 KG PLUS 7 AXIS- Y, R1,R2,X1,X2,Z1,Z2 COLOURED GRAPHIC SCREEN FULL SET OF TOOL CLAMPS SICK OPERATOR SAFETY LIGHT GUARDS

Condition: ready for operation (used), Year of construction: 2008, Brand: HSM Model: V-Press 1160 plus Year of manufacture: 2008 Pressing force: 532 kN Voltage: 400 V Maximum bale weight: up to 550 kg (depending on material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2,403 kg Machine dimensions: 180 x 157 x 298.5 cm Filling opening dimensions: 19.5 x 65 x 111.5 cm Rsdpfjx Hz Hljx Ah Ueck Condition: very good! Functionality thoroughly tested. FLITS Rental & Sales service: with every machine, we supply a bundle of binding wire (120 wires). Do you need additional bundles of binding wire? Request a non-binding quote. At FLITS Rental & Sales, you can count on speed, transparency, and reliability. We think along with you, respond promptly, and ensure you have the right machine quickly. You are very welcome to view the machines at our location. We are located at Schoterlandseweg 94, 8413NE Oudehorne. Visits are possible by appointment, allowing us to provide comprehensive information and show you the right machines. We are happy to assist you! Waste baler Paper baler Cardboard baler Plastic baler Waste compactor Recycling Textile press Waste Waste processing

Condition: reconditioned (used), Year of construction: 1985, functionality: fully functional, machine/vehicle number: N.361427 / BM4934, BM4934 Heidelberg well established K-Offset series KORD64 1985 model - one of the very last KORD machines produced! grey model with long electrical box machine fully refurbished and test-printed ink unit completely dismantled and overhauled new ink and new dampening rollers Rilsan oscillator rollers replaced with NEW ones machine in excellent condition - cylinder & gears undamaged Weight 2.650 kg - Dim L219 x W145 x H143cm Rcedpfxscqxvlj Ah Usk 380/400V - 50Hz - 4.2kW machine fully refurbished and test-printed TOP condition!

Condition: excellent (used), Rijva EP 180 Rcodpfx Ahex Ic Ums Ujk 180 tons 50 strokes/min. Adjustment 28 - 140 mm Weight 12,000 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 21,346 h, laser power: 3,200 W, X working area max.: 3000 mm Y working area max.: 1600 mm Control: Rexroth IndraMotion MTX Laser power: 3000 watts Machine - Enclosed machine frame - Hybrid axis system - Linear magazine with 20 slots for clamps and tools - Hydraulic clamps (3 pieces) - Maintenance-free three-phase motors for drives - Repositioning device with programmable hold-down - Foot pedal for clamp closing - Beam protection with direct access - Parts chute on the right - Parts flap on the left - Sensor for parts flap - Work area illumination - FocusLine - Retrofittable for SortMaster Compact - Protective tool - Transport and installation device TRUMPF Laser - Laser light cable (LLK) according to standard layout (10m) - Laser power control - Laser logbook function - Closed beam guidance via laser light cable (LLK) - Separate power supply for TruDisk Compact Cutting Unit - Solid-state laser compact cutting unit - Protective glass - Collision protection - ControlLine Punching Head - Delta Drive - Rotatable mono-tool adapter - Programmable hold-down position - Tool length compensation - Punch spray lubrication - Punch slug extraction - Forming function - Stroke counter for punch Control - TRUMPF control based on Rexroth IndraMotion MTX - Touch panel with 19'' TFT color screen - Integrated technology data - Programmable cutting gas pressure - Remote support interface - Auto shut-off with wake-up function - Program management - Production plan Data Transmission - USB interface - RJ-45 network interface - Central Link - Online Update Manager Safety - CE marking - Two-beam safety light curtain Extended Standard Equipment - TruDisk 3001 solid-state laser with 1 LLK output - Chiller (water-air) - Compact dust extraction system - 1st locating pin (right inside) - Ball tables - Good parts container for parts chute - Chip container for rear removal Extended Laser Equipment - Copper cutting package - Brass cutting package Extended Punching Equipment - MultiShear function - Multitool function - MultiBend function - Thread forming with thread counter Thread former breakage monitoring Lubricant level monitoring - Marking/fast embossing function - Engraving function - Deburring and roller technology function - Ejecting small parts function Parts Ejection - Integrated sorting function for parts chute • Sensor for parts chute • Tray line for 4 standard trays 300 x 400 mm • Customer-supplied trays Extended Machine Equipment - 1x additional clamp - Machine rated for ambient temperatures up to 43°C Rodpfjxhmtwox Ah Ujck Special Sheet Metal Processing - Brush tables - Warping detection Options for Compact Dust Collector - CO2 extinguishing system for the compact dust collector Data Transmission - Wireless Operation Point Machine Accessories - 1 set RTC cassettes incl. die plate SheetMaster Compact - SheetMaster Compact 3000 x 1500 mm (AK05) • Loading station with spreader magnet for sheet separation • Suction frame • Vacuum sensor system • Double sheet detection • Unloading cart for scrap grid and microjoint sheets • 2nd operator's station for loading and unloading.

Condition: used, Year of construction: 2014, functionality: fully functional, Machine name: Hydraulic Tire Vulcanizing Press with Two Stations 2. General Information Manufacturer: HF TireTech Group (Harburg-Freudenberger Maschinenbau GmbH) Rodpfxex I D A Se Ah Uock Model / Type: KHP 46-150 Year of manufacture: 2014 Order number: 7282500526 Station Labels Left station (factory number): 4L Right station (factory number): 4R Control Interface System: Rockwell Automation / Allen-Bradley PanelView Plus 700 Controls: Integrated physical push-button panel 3. Technical Data / Specifications - Configuration: Vertical hydraulic curing press with two chambers Pressure Specifications Maximum pressure: Not clearly legible on the attached nameplate; corresponds to the design parameters of the KHP 46-150 series (typically approx. 250 bar, based on model specifications). Electrical cabinet - Label: Cabinet B01 Inventory tags: “024398” / “100” Hydraulic System - Unit Manufacturer: Parker Tank / Components: Branded hydraulic reservoir and system components Pump / Motor: Vertically mounted electric motor on a white/beige hydraulic tank Loading Mechanism - System: Automatic loading system for green tires - Mold handling: Segmented mold handlers Pneumatic Control System Control panel: Dedicated pneumatic control panel (Pneumatic PC) Equipment: Pressure regulators and solenoid valves

Condition: excellent (used), Year of construction: 2009, Technical Data: Working length: 3230 mm Distance between uprights: 2690 mm Pressing force: 230 tons CNC control: TASC 6000 Number of controlled axes: Stroke: 445 mm Throat depth: 420 mm Table width: 140 mm Working height: 1065 mm Crowning: CNC-controlled Hydraulic tool clamping Die shifting CE marking Motor power: 30 kW Rsdexdt U Hjpfx Ah Usck Dimensions (L x W x H): approx. 4150 x 2350 x 3100 mm Weight: approx. 17 tons Accessories: 2 pcs. bending aids Electronic pressure gauge Measuring system with centrally mounted glass scales and temperature compensation Safety device BendGuard Network capability Support arm with height adjustment Condition: Overall in very good condition Little used, 35,000 hours The seller is not liable for typographical or data transmission errors. The machine is visually, technically, and regarding wear in accordance with its age; used machines are sold without any warranty.

Condition: good (used), functionality: fully functional, Year of construction: 1995, operating hours: 32,518 h, control type: CNC control, pressing force: 250 t, Bending length [mm]: 3550 Pressing force [t]: 250 Control: Cybelec DNC 906 PS A Operating hours [h]: 32,518 - Hydraulic quick clamping for punch and die - Hydraulic crowning system via CNC - 2-axis CNC backgauge (X and R) - 4 manually adjustable backgauge fingers Rodpfx Aoxcmwroh Usck - 2 movable bending aids - Comprehensive tooling package

Condition: used, Year of construction: 2008, functionality: fully functional, Machine Name: Hydraulic Tire Vulcanizing Press with Two Stations 2. General Information Manufacturer: Harburg-Freudenberger Maschinenbau GmbH (Rubber Technology Division) Model / Type: KHP 52-180 Year of Manufacture: 2008 Order Number: 70 825 00 225 Rcsdpfex I Dyqjx Ah Uek Station Identification Left Station (Serial Number): 4L Right Station (Serial Number): 4R Control Interface System: Rockwell Automation / Allen-Bradley PanelView Plus 700 Control Elements: Integrated physical pushbutton panel 3. Technical Data / Specifications - Configuration: Vertical hydraulic curing press with two chambers Pressure Values Maximum Pressure: 240.2 bar Test Pressure: 343.8 bar Test Date: January 2008 Electrical Cabinet - Designation: Cabinet D11 Inventory Labels: "4019311" / "99" Hydraulic System - Unit Configuration: Rear-mounted green hydraulic tank and manifold system - Components: Rexroth hydraulic valves and gauges (visibly installed) Loading Mechanism - System: Automatic loading system for green tires - Mold Handling: Segmented mold handler Auxiliary Control System - Control Panel: Secondary pneumatic/hydraulic valve control panel - Manufacturer: Rockwell Automation - Installation Location: Mounted at belt conveyor infeed

Condition: excellent (used), Year of construction: 2013, Technical Data: Working length: 3050 mm Distance between uprights: 2550 mm Pressing force: 130 tons CNC control: EHT EPC-D01-3D graphic controller 2D and 3D programming Touchscreen 17" LCD color display EHT angle measuring system Controlled axes: Y1/Y2; X1/X2; R; Z1/Z2 Stroke: 400 mm Throat depth: 405 mm Installation height: 595 mm Table width: 110 mm Working height: 1065 mm Crowning: CNC-controlled Safety device: PILZ PSENvip 440 Camera-based system 2 support arms with T-slot Hydraulic tool clamping top and bottom CE marking Motor power: 15 kW Dimensions (L x W x H): approx. 4150 x 1950 x 3200 mm Weight: approx. 11 tons Accessories: Control cabinet air-conditioning unit Various tools Rcodpow Tdcbsfx Ah Usk The seller is not liable for typographical or data transmission errors. Machine condition regarding appearance, technology, and wear corresponds to its age; used machines are sold without any warranty.

Condition: good (used), functionality: fully functional, Year of construction: 2005, control type: CNC control, installation height: 615 mm, pressing force: 320 t, Bending length [mm] 4220.00 Press force [tons] 320 Control unit TRUMPF TASC 6000 Hydraulic hours [h] 53,030 Standard equipment: - Rigid machine frame, all-steel welded construction - Press beam with high bending strength - Spherical mounting of the press beam with beam tilt capability Rsdexxbr Aspfx Ah Ujck - Electro-hydraulic top drive with 4-cylinder technology - Proportional valve technology and switchable double pump - Modern block hydraulics with control valves mounted on the cylinder - Electronic pressure scale - Measuring system with centrally mounted glass scales and temperature compensation - Manual, integrated wedge crowning in the bed - "New Standard Clamping" manual, hardened, self-centring upper tool clamping system for vertical tool change - Lower tool clamping with hydraulic clamping, hardened - Programmable lower tool displacement (pneumatic, 2 positions) - 2-axis backgauge system with rack-and-pinion drive for X and R axes, 2 stop fingers, safely adjustable from the front - Machine control: TASC 6000 - Operator console with LCD keypad, emergency up, down and E-stop foot switch - Safety features: integrated side doors and automatic rear roller cover - Control cabinet cooling - Oil cooler - Modern machine design + 5-axis backgauge system + Hydraulic upper tool clamping + CNC crowning + BendGuard + 2 support consoles + Park position + 1 bending aid + Additional foot switch

Condition: used, Year of construction: 2021, functionality: fully functional, Machine name: Hydraulic Tire Vulcanizing Press with Two Stations General Information Manufacturer: HF TireTech Group (Harburg-Freudenberger Maschinenbau GmbH) Model / Type: MCP 52-180IC Year of manufacture: 2021 Order number: 7782500896 Station identification: Rcedpfxjx I A Nqe Ah Usk Left station number: 1L Right station number: 1R Asset number: "D09" Control interface: Allen-Bradley PanelView Plus terminal with manual override switches Technical Data / Specifications Configuration: Vertical dual-chamber curing system Hydraulic system: Manufacturer: Parker Motor: Electric motor, mounted on top of the blue reservoir Tank: Blue steel tank with integrated level monitoring Loading system: Automatic green tire loading mechanism with forward-facing chucks

Condition: excellent (used), Year of construction: 2012, Technical Data: Working length: 4100 mm Distance between uprights: 3550 mm Press force: 300 tons CNC control: DELEM EPC-3D Controlled axes: Y1/Y2; X; R; Z1/Z2 Hydraulic tool clamping top and bottom: WILA system CNC crowning Stroke: 550 mm Throat depth: 405 mm Installation height: 620 mm 2 bending aids Angle measuring system Motor power: 30 kW Laser monitoring Table height: 980 mm Dimensions (L x W x H): approx. 5550 x 2950 x 3400 mm Weight: approx. 24.5 tons Accessories: Manual tool changer Segmented bending with step-by-step support of the bending aids (segment bending) 1 set of tools Condition: Very good condition The seller assumes no liability for typing or data transmission errors. The machine’s appearance, technical condition, and wear are consistent with its age; used machines are sold without any warranty. Rcjdpfoxdt Umox Ah Uek

Condition: good (used), functionality: fully functional, Year of construction: 1997, installation height: 535 mm, pressing force: 85 t, Bending length [mm] 2050.00 Pressing force [t] 85 Control Delem DA 69 Operating hours [h] 76807 Standard equipment: - Upper drive concept in two-cylinder design Y1/Y2 - Electro-hydraulic ram drive in proportional valve technology - Ram travel measuring system with spring compensation via glass scales - Modern block hydraulics - Spherical suspension and inclination of the pressure beam - CNC back stop system - Safe finger adjustment from the front - Self-centering, manual, hardened upper tool holder for vertical tool change - Hardened, manual lower tool holder Rcjdpfxowld R Ds Ah Uok - Program-controlled lower tool displacement (I-axis) for 2 positions - Flat front cover - Modern protective cover + 6-axis back stop system + Hydraulic upper tool clamping + Hydraulic lower tool clamping

Condition: excellent (used), Year of construction: 1999, Technical Data: Working length: 3050 mm Distance between uprights: 2690 mm Pressing force: 130 t CNC control: DELEM Adjustable backgauge Controlled axes: Z1 / Z2; X; R CNC-controlled crowning Installation height: 535 mm Stroke: 365 mm Throat depth: 410 mm Hydraulic tool clamping top and bottom Ram position measuring system with spring-back compensation via glass scales Program-controlled lower tool shifting (I-axis) for 2 positions Motor power: 12.5 kW Number of backgauge fingers: 2 CE mark Dimensions (L x W x H): approx. 3800 x 2350 x 3150 mm Weight: approx. 14 tonnes Rjdpfx Ahew Tcnce Ueck Condition: Good condition The seller is not liable for typing or data transmission errors. The machine's appearance, technical condition and wear correspond to its age; used machines are sold without any warranty.

Condition: good (used), functionality: fully functional, Year of construction: 2014, laser power: 3,000 W, X Working area max.: 2500 mm Y Working area max.: 1250 mm Control: IndraMotion MTX Laser power: 3000 watts Standard equipment: Machine - Coordinate guide for high-precision machining - Stable, easily accessible C-frame - Linear magazine with 21 tool positions and 4 clamps - Drives with maintenance-free three-phase servo motors - Repositioning device with programmable hold-down device - Foot switch for clamp closing - Ball tables - 2 part flaps 500 mm x 500 mm - FocusLine - NitroLine - FastLine - Ejection cylinder for laser parts - Slag cone detection TRUMPF laser - TruDisk 3001 solid-state laser with 1 LLK outlet - Excitation via pump diodes - LLK according to standard layout (10m) - TruControl laser control 1000 - Cooling unit - Laser logbook function Cutting head - Solid-state laser compact cutting unit - ControlLine Punching head - Electro-hydraulic punching head - Rotatable mono tool holder - Tool length compensation - Programmable hold-down device (active / passive / repositioning) - Punch stroke counter and thread stroke counter - Spray lubrication of punch - Punch slug extraction - Calculation of filling level in the punching console - Level monitoring of thread forming and tool lubrication Control - Open control based on Rexroth IndraMotion MTX - Control panel with 17" touch control panel - Program management - Production plan - Integrated technology data - Teleservice via Internet - Programmable cutting gas pressure - Automatic switch-off with wake-up mode Data transfer - USB interface - RJ-45 network connection Safety - CE marking - Two-beam light barriers - Monitoring system for, among others Gas pressure, temperature, cooling water - Quick shutdown hydraulics - Protection against scattered radiation - Compact dust extraction system - MultiTool function - MultiBend function - Thread forming function - Engraving function - Deburring and rolling technology function - SoftPunch function - StripLine - Lowerable die - Spray lubrication die including level monitoring - Additional clamping claw - 4 pcs. Height-adjustable clamping claws - Vibration-damped installation - Chip conveyor with tilting container - Blow-out device for small parts - Warping detection SheetMaster - Unloading platform - Suction frame with 36 suction cups - Peeling suction cup - Vacuum sensors for each suction cup - Double sheet detector for double sheet control - Central lubrication - TRUMPF control based on Rexroth IndraMotion MTX - Automatic clamp closing machine - Loading and unloading parallel to production time - Peeling system including positioning aid medium format (2500x1250) - First additional suction cup package standard - Second additional suction cup package standard - Unloading monitoring laser parts Rcodpfx Ahowld Sue Uek GripMaster - Parts conveyor belt punching station - Parts conveyor belt laser station ToolMaster with 70 stations (only for punching operation) - ToolMaster set-up parallel to production time

Condition: excellent (used), Technical specifications: Pressing force: 500 tons Distance between uprights: 4,300 mm Rcsdpfx Aoxgblljh Usk Dimensions (length x width x height): approx. 5,100 x 900 x 4,300 / 5,600 mm For transport (in two parts): Dimensions: 2 x 5,100 x 900 x 3,050 mm Weight: 1x 15,700 kg – 1x 13,200 kg (total 28,900 kg) The seller assumes no liability for typographical or data transmission errors. The machine’s appearance, technical condition, and wear are consistent with its age; used machines are sold without any warranty.

Condition: excellent (used), Technical specifications: Revision in 2024 Working length: 3100 mm Column width: 2760 mm Press force: 220 tons CNC control: OPERATOR II Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Automatic crowning Motorized adjustable backgauge Thrust: 650 mm Stroke: 200 mm Working height: 960 mm Motor power: 17 kW CE mark Redov Tcnljpfx Ah Uock Dimensions (length x width x height): approx. 3700 x 2400 x 2900 mm Weight: approx. 15 tons The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 2012, Technical specifications: Working length: 4300 mm Distance between columns: 3230 mm Press force: 400 tons CNC control: AMADA AMNC Number of controlled axes: 5 CNC crowning Stroke: 350 mm Rodpfjwl U Rhox Ah Ueck Throat: 420 mm Installation height: 620 mm Motor power: 38.5 kW Laser monitoring: FIESSLER Table height: 960 mm Dimensions (length x width x height): approx. 5550 x 2950 x 3400 mm Weight: approx. 29.5 tons Condition: Very good condition, approximately 30,000 hours The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 2006, Technical Specifications: Press Brake: Model: AMADA HDS 1030 NT Working Length: 3100 mm Folding Width: 2700 mm Press Force: 100 t CNC Control: AMADA AMNC PC 3D-graphic 15-inch TFT Color Screen Controlled Axes: 7 Drive: Servo-Hydraulic Installation Height: 500 mm Motorized Adjustable Backgauge: 600 mm Thrust: 415 mm Stroke: 200 mm Working Height: 960 mm Motor Power: 9 kW Dimensions (Length x Width x Height): approx. 4300 x 2300 x 2950 mm Weight: approx. 8 tons Loading and Unloading Robot: Model: ASTRO-MP 20 Redpewmw Acsfx Ah Ujck Max. Capacity: 20 kg Number of Controlled Axes: 6 CNC control: AMADA AMNC II Drive: AC servo motor Bending robot: Model: ASTRO-100 NT CNC control: AMADA AMNC II Max. capacity: 20 kg Number of controlled axes: 5 Length of linear axis: 3080 mm Max. cutting size for sheet metal: 800 x 1000 mm Max. cutting size for profiles: 300 x 1800 mm Drive: AC servo motor The seller is not liable for typing or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 2005, Technical specifications: Year of manufacture: 2005, revision 2025 Rcsdpfxowmzd Rj Ah Ujk Working length: 2050 mm Width between columns: 1665 mm Press force: 50 tons CNC control: AMADA AMNC PC, 2D graphics Screen: 15" TFT Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Automatic bending angle measurement: AMADA DigiPro Dual speed: X; R; Z-axis Motorized adjustable backgauge Stroke: 200 mm Thrust: 400 mm Working height: 900 mm Laser monitoring: FIESSLER Motor power: 6 kW Dimensions (length x width x height): approx. 3000 x 1650 x 2500 mm Weight: approx. 4.8 tons Accessories: 1 set AMADA tool Condition: Very good, almost new condition The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: like new (used), Year of construction: 2002, Technical data: Year of construction 2002; revision in 2023 Working length: 3100 mm column width: 2650 mm Redpfx Aotn Abtjh Ueck Pressing force: 300 to CNC control: Easybend 2DT Touch-Graphics 2D (new in 2023) Controlled axes: Y1 / Y2; X CNC table bending compensation throat depth: 300 mm Stroke: 800 mm Dimensions (length x width x height): approx. 4200 x 2200 x 3700 mm Weight: approx. 19 tons Accessories: 1 set of new tools The seller is not liable for typing or data transmission errors. The machine is in appearance, technology and wear according to age; used machines are sold without any warranty.