Used Sliding Head Lathe for sale (20,174)

Condition: refurbished (used), Year of construction: 2022, functionality: fully functional, turning diameter over bed: 540 mm turning length: 1.500 mm turning diameter in the recess: 580 mm Working travel of the lower slide max. approx.: 415 mm adjustment of upper support, max. approx.: 140 mm turning speed range: 0 - 1.800 1/min diam. of main spinde: 135 mm spindle bore: 68 mm internal taper diameter: 68 mm bed width: 403 mm Equipped with: Three jaw chucks FORKARDT 250 Digital read out 3 axis fixed steady rest feed safety chip tray Ksdsz N E Afspfx Acpedu tool holders, 6 chisel holders, 1 holder for clamping sleeve

Condition: used, Year of construction: 1997, CNC Turning Center VDF Boehringer VDF 250 Cm (NO TAILSTOCK) General Manufacturer: VDF Boehringer Model: VDF 250 Cm Type: CNC slant bed turning center, chuck work Year: 1997 Serial no.: 1114.3705-24 Control: Siemens Sinumerik 840C Location: Korschenbroich, Germany Working area Swing over bed: 550 mm Swing over cross slide: 480 mm Max. turning length: 1,000 mm Tailstock: none (chuck work only) Main spindle Spindle nose: size 8, DIN 55026 Spindle bore: 103 mm Max. speed: 4,500 rpm C-axis: yes Axes X travel: 405 mm Z travel: 1,099 mm Rapid traverse: 10 m/min Feed range: 0.1 to 10,000 mm/min Kdsdpfx Aoz Rnrrecpsu Turret 12 stations, VDI 50 (DIN 69880) Driven tools: yes, up to 2,500 rpm, 5.4 kW Driven tool torque: 25 Nm (standard), 100 Nm (low range) Clamping Hydraulic power chuck, special swivel chuck (Sonderschwenkfutter) Full hydraulic clamping cylinder Equipment Coolant system: 600 l tank, 5.5 bar, 60 l/min Chip conveyor: right-hand discharge Hydraulic unit: Hydrokraft Control cabinet: Rittal, with cooling unit Oil mist extractor: yes Pivoting operator panel Electrical 400 V, 3 phase, 50 Hz Main fuse: 125 A Operating current: 100 A Total connected load: approx. 50 kW Dimensions and weight Approx. 5,400 x 3,200 x 2,400 mm (L x W x H) Weight: approx. 10,500 kg Points to check before sending: Weight. The other listing says about 11,000 kg. I used 10,500 kg because that is what is written on the machine (“10,5 to.”). Chuck make. The listing names a Forkardt chuck. The marking on the chuck in your second photo looked like it could be Röhm, so it’s worth a quick look. resale Chip conveyor. It is not visible in the photos. Confirm it is with the machine. Control model. The 840C comes from the listing only. The screen photo doesn’t show it clearly.

Condition: new, mileage: 1 km, power: 382 kW (519.37 HP), fuel type: diesel, tire size: 385/65 R 22.5, axle configuration: 6x4, wheelbase: 3,750 mm, fuel: diesel, fuel tank capacity: 940 l, color: white, driver cabin: sleeper cab, number of gears: 14, emission class: euro3, suspension: steel, = Additional options and accessories = - 2 fuel tanks = Remarks = Scania G 520 A6x4HZ 6x4 Tractor | 520 HP | Euro 3 | Heavy-Duty The Scania G 520 A6x4HZ is a heavy-duty 6x4 tractor designed for construction, heavy haulage and demanding regional transport. Its 13-litre Scania DC13 Euro 3 engine delivers 520 HP and is combined with the G33CM 14-speed gearbox, Scania Opticruise and a robust tandem rear axle configuration. Key Highlights - Scania G 520 A6x4HZ - 6x4 heavy-duty tractor - Scania XT configuration - Scania DC13 13-litre diesel engine - 520 HP - Euro 3 emission standard - Scania G33CM 14-speed gearbox - Scania Opticruise - Standard, Power and Off-Road driving modes - 3,750 mm wheelbase - High chassis configuration - Technical front axle capacity: 9,000 kg - Technical rear bogie capacity: 32,000 kg - Differential lock - Full mechanical leaf-spring suspension - Hydraulic Scania R4700D retarder - JOST JSK38 C1 3.5" fifth wheel - EG9R rear PTO - Dual 470-litre steel fuel tanks - CG20N cab with air conditioning Built for Heavy-Duty Transport The 6x4 drivetrain uses a heavy-duty tandem rear bogie with two driven rear axles, differential lock and parabolic leaf-spring suspension. Combined with the Scania XT package and high chassis, this configuration is suitable for demanding construction, heavy-haulage and industrial transport applications. Applications - Heavy haulage - Construction transport - Machinery transport - Infrastructure projects - Industrial transport - Project logistics Technical Specifications - Vehicle: Scania G 520 A6x4HZ - Drive: 6x4 - Engine: Scania DC13 191 - Power: 520 HP - Emission standard: Euro 3 - Gearbox: Scania G33CM - Transmission: Scania Opticruise - Wheelbase: 3,750 mm - Rear axle ratio: 4.72 - Fuel capacity: 2 x 470 litres - Front tyres: 385/65 R22.5 - Rear tyres: 315/80 R22.5 - Suspension: Leaf / leaf - Cab: CG20N - Fifth wheel: JOST JSK38 C1 3.5" Why Schaften Automotive? Schaften Automotive supplies European commercial vehicles for international markets, including export documentation, body-building solutions, international transport and worldwide delivery. Contact our team for availability, pricing and worldwide export. Kdedsz Indzepfx Acpju = More information = General information Year of construction: 2027 Technical information Number of cylinders: 6 Engine capacity: 12.700 cc Axle configuration Brakes: drum brakes Suspension: leaf suspension Axle 1: Tyre size: 385/65 R 22.5 Axle 2: Tyre size: 315/80 R 22.5 Axle 3: Tyre size: 315/80 R 22.5 Layout Number of berths: 1 Other information Engine type: in-line Availability: in stock Volume first fuel tank: 470 l Volume second fuel tank: 470 l

Condition: used, Year of construction: 1976, turning diameter over bed 0560 mm turning diameter over slide rest 350 mm turning length 1500 mm Kdjdet Tqgxjpfx Acpeu spindle bore 62 mm spindle turning speed range 16- 1250 U/min feeds - longitudinal 0,050-24,0 mm/U feeds - cross 0,039-18,86 mm/U dimensions of the machine ca. 3,5 x 1,6 x 1,7 m total power requirement 9 kW weight of the machine ca. 4,5 t Machine has a 4 position tool holder, a three jaw chuck, a rotating center and a taper gauge.

Condition: new, mileage: 1 km, power: 324 kW (440.52 HP), tire size: 315/80R22.5, axle configuration: 6x4, fuel tank capacity: 590 l, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro2, suspension: steel, Equipment: onboard computer, = Additional options and accessories = - 1 fuel tank - Autoradio - PTO - Sun visor = Remarks = MAN TGS 33.440 6x4 BB SA Tractor Head | 440 HP | Euro 2 | Heavy-Duty The MAN TGS 33.440 6x4 BB SA is a heavy-duty tractor head for heavy transport, construction logistics, machinery transport and demanding semitrailer operations. Its 440 HP MAN D26 Euro 2 engine, strong 6x4 drivetrain and heavy-duty chassis provide a reliable platform for specialised transport. Key Highlights - MAN TGS 33.440 6x4 BB SA - MAN D2676 D26 Euro 2 diesel engine - 440 HP / 324 kW - 2,250 Nm torque - MAN TipMatic 12.28 OD automated transmission - 6x4 drivetrain - Two driven planetary rear axles - Differential locks on both driven rear axles - Leaf / leaf heavy-duty suspension - 3,600 mm wheelbase - 33,000 kg technical GVW - 64,000 kg technical GTW - Up to 86,000 kg Technical Load Plus GTW - JOST JSK 38 C 3.5" fifth wheel - MAN NH/4c gearbox-dependent PTO - 590-litre aluminium fuel tank - 315/80 R22.5 tyres - High-temperature configuration Built for Heavy Transport The TGS 33.440 combines 2,250 Nm of torque with two driven 13-tonne planetary rear axles and differential locks for demanding loaded operations. MAN TipMatic includes Heavy Transport, Offroad and Manoeuvre driving programs. Kdjdpfxjzi Sc Hj Acpeu Raised air intake, air pre-separator, enhanced cooling and radiator protection support operation in hot and dusty international environments. Applications - Heavy haulage - Machinery transport - Low-loader operations - Construction and infrastructure logistics - Industrial and project cargo - Specialised semitrailer operations Technical Specifications - Vehicle: MAN TGS 33.440 6x4 BB SA - Type: Heavy-duty tractor head - Drive: 6x4 - Engine: MAN D2676 D26 Euro 2 - Power: 440 HP / 324 kW - Torque: 2,250 Nm - Transmission: MAN TipMatic 12.28 OD - Wheelbase: 3,600 mm - Technical GVW: 33,000 kg - Technical GTW: 64,000 kg - Technical Load Plus GTW: Up to 86,000 kg - Fuel tank: 590 litres - Tyres: 315/80 R22.5 - Cab: MAN TN Why Schaften Automotive? Schaften Automotive supplies factory-new MAN, Mercedes-Benz, IVECO and Scania commercial vehicles for international markets, including export documentation, custom solutions, international transport and worldwide delivery. Contact our team for availability, export options and worldwide delivery. = More information = Year of construction: 2026 Cab: TN Tyre size: 315/80R22.5 Brakes: drum brakes Suspension: leaf suspension Number of cylinders: 6 Number of berths: 1 Availability: in stock

Condition: excellent (used), Year of construction: 2011, operating hours: 29,000 h, functionality: fully functional, Weiler E40 Precision Lathe Manufacturer: Weiler Type: E40 Year of Manufacture: 2011 Condition: Used, operational, ready for demonstration Operating Hours: 29,000 h Scope of Supply: - Documentation - Machine feet - Coolant system Kdsdpfx Acoztypvepeu - Machine lamp - Full chuck jaws - Half chuck jaws - 3-jaw chuck - 4-jaw chuck - 4-position automatic tool changer incl. 4 tool holders - MultiFix tool changer

Condition: ready for operation (used), functionality: fully functional, Two machines with extensive equipment and an attractive accessory package! Both machines share a common chip conveyor, which ensures efficient chip removal. In addition, a coolant tank has been retrofitted, which provides a valuable extension to the equipment. A particular advantage is the comprehensive accessory package: the scope of delivery includes various tool holders, clamping jaws, and a new driven tool (AGW). Ksdpoz Tc Iyjfx Acpodu

Condition: used, total length: 3,700 mm, total width: 1,100 mm, total height: 1,500 mm, Colour: Green Empty weight: 2.500 kg - Documentation available: No - CE certificate present: No - Drive system: Conventional - Centre height [mm]: 250 - Swing over bed [mm]: 500 - Carriage turning diameter [mm]: 300 - Distance between centres [mm]: 2000 - Bed width [mm]: 385 - Spindle bore [mm]: 73 - Min. spindle speed [rpm]: 26 - Max. spindle speed [rpm]: 1100 - Options: Fixed steady, Removable bed, Three-jaw chuck, Travelling steady - Swing over removable bed [mm]: 750 Kdjdpfx Acjz Et Uaopju - Transport dimensions: 3700mm x 1100mm x 1500mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1972, turning diameter over bed 1440 mm turning diameter over slide rest 960 mm turning length 8200 mm faceplate 1250 mm turning diameter in the gap 1460 mm length of gap 460 mm turning speeds 1,8-400 U/min workpiece weight 22000 kg total power requirement 46 kW Machine overhauled 2004 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop Kdsdpfx Acsyutq Rjpeu If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2008, Distance between centres 1500 mm Center height 250 mm Swing over bed 500 mm Swing over cross slide 300 mm Swing in gap 710 mm Length of gap 240 mm Spindle bore 82 mm Spindle speeds 11-1600 rpm Automatic feeding Rapid feeding Equipped with: 3 quick change tool holders 2 axis dro Kodjz Szm Sepfx Acpsdu

Condition: not inspected (used), Year of construction: 1998, overall weight: 4,200 kg, Fanuc 21T control Ksdpfx Asz Akxyscpsdu 12-position turret Working envelope: 600 x 350 mm Spindle speeds: 3500 RPM

Condition: used, machine/vehicle number: 1811, 18er Valve Monobloc volumetric piston filler with 6 head capper Kdjdpfx Aez S Rciocpeu filling valves: 18 capacity / hour ca.: 9000 capping heads: 6 working direction: right-left (CCW)

Condition: good (used), mileage: 191,629 km, power: 105 kW (142.76 HP), first registration: 10/2019, fuel type: diesel, tire size: 235/65R16, axle configuration: 4x2, wheelbase: 4,330 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 9, total length: 6,970 mm, total width: 2,020 mm, total height: 2,900 mm, loading space length: 1,810 mm, loading space width: 1,780 mm, loading space height: 1,920 mm, Equipment: ABS, Apple CarPlay, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, parking heater, power mirror, seat heater, traction control, = Additional Options and Accessories = - Heated mirrors - Tinted windows - Halogen lamp - None - Manual - Radio/cassette - Reversing camera - Fabric - Blind spot sensor = Notes = Configuration: 4x2, Unladen weight: 2769 kg, Gross vehicle weight: 3500 kg, Cruise control, Air conditioning, Number of airbags: 2, Auxiliary heater, Parking assistance: None, Tinted windows, Electric windows, Electric mirrors, Radio/cassette, Carplay, Color: White, Heated mirrors, Reversing camera, Lighting type: Halogen lamp, Climate control, Seat heating, Bluetooth, Blind spot sensor, Engine power: 105 kW (141 hp), Engine displacement: 2143 cc, Fuel: Diesel, Euro: 6, Drive technology: Timing chain, Transmission type: Automatic, Power steering, ABS, ASR, Starter battery, Body type: additionally raised and extended, Side paneling, Roof rack: None, Side doors: 1, Side windows: 6, Rear closure: Double door, Central locking, Number of seats: 9, Seat arrangement: 2+2+2+3, Seat upholstery: Fabric, Seat adjustment: Manual, L3H2 Tourer 9-seater 2x Airco Electric Sliding Door Mbux Automatic Cruise Control Camera, Tire type: All-season tires = Additional Information = General Information Number of doors: 1 License plate: KLEYN1 Kdodoz Eqvnepfx Acpsu Axle Configuration Tire size: 235/65R16 Brakes: Disc brakes Suspension: Leaf spring suspension Axle 1: Tire tread depth left: 4 mm; Tire tread depth right: 3 mm Axle 2: Tire tread depth left: 2 mm; Tire tread depth right: 3 mm Weights Unladen weight: 2,769 kg Payload: 731 kg GVW: 3,500 kg Functional Loading area height: 61 cm Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Financial Information Leasing price: €463 per month (van, 72 months); Ask for further information and conditions.

Condition: reconditioned (used), Year of construction: 2003, Turning machine Gildemeister Type/Model: DMG NEF 320 K Condition: Used Geometrically overhauled in 2026, geometric protocol available Year of manufacture: 2003 The machine was completely disassembled, cleaned, geometrically overhauled, repainted, and reassembled. The machine bed and guides were professionally refurbished. All slides were inspected, adjusted, and set. The main spindle, gearbox, feeds, tailstock, coolant system, as well as the electrical and mechanical functions were checked. Finally, a geometric measurement with a test protocol according to DIN 8605 was carried out, as well as a test run under realistic conditions. Features Control: SINUMERIK 810DE-L CCUO Cycles for taper turning and thread cutting Technical data Swinging diameter over bed: 320 mm Swinging diameter over cross slide: 150 mm Chuck: 200 mm Cross travel: 150 mm Feed rate AC: 4 m/min Spindle mounting: MK 6 Turning spindle size: 6 Speed range: 14 - 3550 min-1 Spindle bore: 52 mm Spindle mounting: MK 6 Spindle in front bearing: 85 mm Tailstock quill: 70 mm Tailstock quill mounting: MK 5 Tailstock quill travel: 120 mm Max. torque: 320 Nm Speed range: 14 - 3,550 1/min Kdjdpfxewlhn Hj Acpsu Gear stages: 2 Drive power: 7 kW Tool holder: Multifix size B Dimensions (L x W x H): approx. 2600 x 1440 x 1800 mm Weight: approx. 1500 kg Inquiry item: Transportation costs will be provided in a separate offer.

Condition: good (used), mileage: 316,507 km, power: 81 kW (110.13 HP), first registration: 04/2018, tire size: 205/55R16, axle configuration: 4x2, wheelbase: 3,010 mm, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, suspension: other, number of seats: 5, total length: 4,880 mm, total width: 1,790 mm, total height: 1,830 mm, loading space length: 1,340 mm, loading space width: 1,110 mm, loading space height: 1,230 mm, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, power mirror, traction control, = Additional Options and Accessories = - Heated mirrors Kdodpfx Ajz Dn Ifecpou - Tinted windows - Halogen lamp - None - Manual - Radio/cassette - Fabric = Notes = Configuration: 4x2, Unladen weight: 1551 kg, Gross vehicle weight: 2280 kg, Towing capacity, unbraked: 750 kg, Type of cab: Double cab, Cruise control, Air conditioning, Number of airbags: 4, Rear window wiper, Parking assistance: None, Tinted windows, Electric windows, Electric mirrors, Radio/cassette, Color: White, Heated mirrors, Type of lighting: Halogen lamp, Bluetooth, Engine power: 81 kW (109 hp), Number of cylinders: 4, Displacement: 1395 cc, Fuel: Natural gas, Euro: 6, Drive technology: Timing belt, Type of transmission: Manual, Gears: 6, Power steering, ABS, ASR, Starter battery, Body type: extended, Side paneling, Roof rack: None, Side doors: 2, Side windows: 4, Rear closure: Tailgate, Central locking, Number of seats: 5, Seat arrangement: 1+1+3, Seat upholstery: Fabric, Seat adjustment: Manual, L2 Maxi Combi 5-seater, 2 sliding doors, Air conditioning, BPM-free, Euro 6, Tire type: All-season tires = Additional Information = General Information Number of doors: 2 License plate: SJ-936-G Drivetrain Fuel type: Natural gas Axle Configuration Tire size: 205/55R16 Axle 1: Tire tread depth left: 2 mm; Tire tread depth right: 2 mm; Brakes: Disc brakes; Suspension: Coil suspension Axle 2: Tire tread depth left: 6 mm; Tire tread depth right: 4 mm; Brakes: Drum brakes; Suspension: Leaf spring suspension Weights Unladen weight: 1,551 kg Payload: 729 kg GVW: 2,280 kg Functional Loading area height: 56 cm Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2

Condition: good (used), mileage: 378,137 km, power: 75 kW (101.97 HP), first registration: 05/2017, fuel type: diesel, tire size: 205/55R16, axle configuration: 4x2, wheelbase: 3,010 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 5, emission class: euro6, suspension: other, number of seats: 5, total length: 4,880 mm, total width: 1,790 mm, total height: 1,830 mm, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, power mirror, traction control, = Additional Options and Accessories = - Heated mirrors - Tinted windows - Halogen lamp - None - Manual - Radio/cassette - Fabric Kjdpsz D Atpofx Acpsdu = Notes = Configuration: 4x2, Unladen weight: 1443 kg, Gross vehicle weight: 2280 kg, Cruise control, Air conditioning, Number of airbags: 4, Rear window wiper, Parking assist: None, Tinted windows, Electric windows, Electric mirrors, Radio/cassette, Color: White, Heated mirrors, Lighting type: Halogen lamp, Bluetooth, Engine power: 75 kW (101 hp), Number of cylinders: 4, Engine displacement: 1968 cc, Fuel: Diesel, Euro: 6, Drive technology: Timing belt, Transmission type: Manual, Gears: 5, Power steering, ABS, ASR, Starter battery, Body type: extended, Side paneling, Roof rack: None, Side doors: 2, Side windows: 4, Rear closure: Tailgate, Central locking, Number of seats: 5, Seat arrangement: 1+1+3, Seat upholstery: Fabric, Seat adjustment: Manual, L2 Maxi Kombi Wheelchair Bus 5 Persons 2 Sliding Doors Air Conditioning VAT Free Euro6, Tire type: All-season tires = Further Information = General information Number of doors: 2 License plate: NZ-510-R Axle configuration Tire size: 205/55R16 Brakes: Disc brakes Axle 1: Tire tread depth left: 3 mm; Tire tread depth right: 4 mm; Suspension: Coil spring suspension Axle 2: Tire tread depth left: 5 mm; Tire tread depth right: 5 mm; Suspension: Leaf spring suspension Weights Unladen weight: 1,443 kg Payload: 837 kg GVW: 2,280 kg Maintenance APK (Technical Inspection): valid until 12/2026 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2

Condition: used, functionality: fully functional, turning diameter: 290 mm, center height: 145 mm, spindle bore: 35 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 52 rpm, total height: 1,200 mm, total length: 1,500 mm, total width: 700 mm, 3 Phase 380V motor is running fine! Left & right running. Electronic engine brake. Geared headstock, gears running in oil. 9 Spindle speeds adjustable from 52 up to 2000 RPM. Kdjdpfx Aswfiaqscpou Metric lathe. Norton gearbox for easy thread cutting. Power feed in both side as cross ways direction. Original Harrison splash guard. D1-3 Camlock spindle nose. Multifix quick change toolpost with a total of 4 toolholders. MT3 Tailstock intake. Distance between centers: 800mm Center height: 145mm Spindle bore: 35mm Overall dimensions: 150x70x120cm Made in the UK. Contact us for shipping options! €3,900.00 Ex VAT

Condition: used, Technical details: faceplate diameter: 1400 mm swing diameter: 2000 mm turning height: 1270 mm main drive: 80 kW faceplate speeds from - to: 1 - 355 U/min max. workpiece weight: 6.000 kg milling motor: 37 kW milling head speed: 7 - 3000 U/min milling spindle - taper: ISO 50 cross rail adjustment - vertical: 800 (8 x 100 mm) mm Kdedpfovb Dcmjx Acpju ram head dimension: 240 x 240 mm max. ram stroke: 1250 mm weight of the machine ca.: 50 to total power requirement: 133 kVA dimensions of the machine ca.: 11 x 5 x 6,4 m Machine general overhould in 2008 and equiped with CNC SIEMENS 840 D control - tool changer for 72 tools - C-axis, live tooling - angular- and straight tool holder head with CAPTO taper - Transmit function - complete splash housing - coolant device, chip conveyor - diverse accessories *

Condition: excellent (used), Voest DA 180 Kodpsxp I D Tsfx Acpodu Voest Alpine DA 180 Conventional Lathe with Digital Readout, Year of Manufacture 1981, in Very Good Original Condition The machine comes from the training workshop of a renowned German mechanical engineering company. Technical Data: VOEST ALPINE Lathe Lead and feed screw lathe, Type DA 180/1, Year of Manufacture 1981 Swing over bed: 380 mm Swing over cross slide: 185 mm Turning length: 1,000 mm Centre height: 180 mm Bed width: 330 mm Spindle bore: 52 mm Tailstock taper: MK 4 Coolant system Motor: 380 Volt, 5.5 kW 12 spindle speeds: 44 - 2,000 rpm 66 longitudinal feeds: 0.072 - 4.038 mm/rev 66 cross feeds: 0.036 - 2.019 mm/rev 66 metric threads: 0.5 - 28 mm 66 inch threads: 1 - 32 TPI 66 module threads: 0.25 - 14 66 DP threads: 2 - 112 3-jaw chuck Weight approx. 1,200 kg Accessories and Equipment: 1 piece Röhm 3-jaw chuck 200 mm Multifix size B Digital readout About the Machine: We offer a Voest Alpine DA 180 conventional lathe with digital readout, year of manufacture 1981, in very good condition. The machine is, of course, fully functional. All slides run very smoothly and evenly. The Voest also runs very quietly, even at high speeds. This newer generation of lathes is very operator-friendly and can produce grind-finish-quality surfaces. Take the opportunity to inspect this machine under power at our premises and see its condition for yourself. You can find further drilling machines from reputable manufacturers on our website.

Condition: good (used), Lathe, flange lathe, heavy lathe, lathe, lathe, flange and fitting surface lathe, slewing ring lathe, flange lathe, mobile lathe, transportable lathe -Manufacturer: Matra, lathe for facing flanges and mating surfaces (slewing ring) Kodjwbd Ibepfx Acpedu -Type: D 56.4 -Turning diameter: up to approx. 900 mm -Travel: X 110 mm / Z mm -Drive motor: 0.55 kW -Dimensions: 1660/1700/H470 mm -Weight: 224 kg

Condition: used, Year of construction: 2006, Masterfill Filling Machine S 500 The Masterfill S 500 is a high-performance, precision filling machine designed to meet the demanding requirements of modern dairy and food production facilities. Built for reliability, efficiency, and hygiene, the S 500 delivers consistent filling accuracy across a wide range of liquid and semi-liquid products. Engineered with advanced control systems, the S 500 ensures smooth operation and minimal product waste, making it ideal for filling milk, yogurt, cream, sauces, and other viscous products. Its robust stainless-steel construction guarantees durability while complying with strict food safety and hygiene standards. The machine features user-friendly controls, allowing operators to easily adjust filling volumes and production speeds to suit different product types and packaging formats. With its compact footprint and efficient design, the Masterfill S 500 integrates seamlessly into existing production lines. Key Features - High-precision volumetric filling system - Suitable for liquid and semi-viscous products Kdodpfx Acoywuczopsu - Hygienic stainless-steel construction - Easy-to-use control interface - Adjustable filling speed and volume - Low maintenance and easy cleaning - Compact and space-efficient design Applications - Milk and dairy products - Yogurt and desserts - Cream and sauces - Beverage and liquid food products Materfill S500 6 head fill while rise filler M2-AF Serial number 4716 YOM 2006 Filling capacity 2ml to 2000 ml The filler is a 6 head automatic filler, with the capacity to store 50 separate preset menus, Brief FDS • Controlled by Siemens S7 PLC via Mitsubishi Beijer HMI • Jars feed in vis constant stainless steel slat band • Jars indexed via program-controlled infeed and outfeed pneumatic gates. • Jars filled via positive pressure within 50 ltr holding tank (this could be changed easily to a constant positive pressure into manifold via modulating pump) • Volume controlled via Nixon BNO turbine flow meters communications with siemens high speed counter. • Liquid feeds into jar with rise during fill or above jar for fill time • Full SIP, CIP, and flush capability programs available Dico CapperSerial number 3/379Brief FDS  Capper with rotating starwheel  Will cap Square of round Jar/ Bottles (change parts included)  Jar enters, signals PEC starwheel turns 90⁰ under capping head  Capping lowers on cam, retracts on cam  Jar/ bottle clamp activated of adjustable cam onto 5/2 valve  Starwheel turns 90⁰ onto exit conveyor  Current capping head removable, for 40mm cap (no alternative head)  All systems work on cams and relays, no PLC  Motor runs on DOL for capping (clutch adjusted and variable speed gearbox)  Cam motor uses inverter. Guards with interlocked access doorway Required services.  3 Phase 32-amp electrical supply  7 Bar air pressure Main control panel Cap sorter and feederRNASRC-N 400-2LSerial no 00801Brief FDS  40mm cap sorter and feeder  Vibrating bowl agitates caps upwards  Air jets and cut outs sort caps placing in correct orientation  Cap chute allows smooth passage to dispensing head with some adjustment  Cap dispenser works on bottle/jar passing under and catching cap, this allows the retaining jaws to open and release cap  Side or over independent speed controlled wheel assists in cap leveling Required services.  240V electrical supply  3 Bar air pressure Filling volume: 25-2000 ml Controls: SIEMENS S7 via Mitsubishi H...

Condition: used, Year of construction: 2001, turning diameter 280 mm turning length 400 mm control Fanuc 18 T spindle bore diameter 51 mm number of controlled axis 2 turning speed range 0 - 4000 U/min rapid speed 30 m/min number of tapers in turret head 12 VDI 40 tail stock Ja dimensions 3,9 x 1,6 x 2,1 m weight of the machine ca. 3,9 t power requirement 15 kW Used CNC- Lahte with box way, 2 axis - 3 jaw chuck Ø 200 mm Ksdpfx Acsyxr Hgepedu - chip conveyor - oil dust collector

Condition: excellent (used), Dividing Head / Quick Divider Manufacturer: Unispa 24-degree direct division 1-degree increments with handwheel Center height: 135 mm (28604) Stock number Length: 470 mm Depth: 300 mm Kedpfev S Ar Isx Acpsdu Height: 260 mm Weight: 60 kg

Condition: used, Year of construction: 2026, faceplate diameter 1.600 mm swing diameter 2.000 mm turning height 1.400 mm Kdodpfx Asyiu N Decpeu Control Fanuc max. Torque 23.863 Nm cutting capacity max. 3.000 kgf max. workpiece weight 10.000 kg table diameter 1.600 mm table speeds min power capacity - table 37/45 kW resolution 0,001 ° Working speed 0 - 1.200 °/min max. table speed 3,333 1/min Shank diameter 32 mm spindle cone ISO 7/24 / No.50 Spindlespeed 30 - 3.000 min/-1 power capacity - Tool Spindle 15 / 18,5 kW max. Torque 235 Nm ram cross section 220 mm x-axis 1.900 mm z-axis 900 mm cross rail adjustment 700 mm tool taper MAS-BT 50 number of toolpositions 24 (12 + 12) pos. max. tool weight 50,0 kg draw bolt DIN 69872.50 rapid feed (X / Z) 7,5 m/min feed speeds max. 7.500 mm/min rapid traverse of the crossrail 300 mm/min total power requirement 80 kVA weight of the machine ca. 34,0 t dimensions of the machine ca. 7,50 x 6,50 x 5,20 m CNC - Vertical Turret Lathe HANKOOK - VTC 160 E - NEWMACHINE

Condition: used, Year of construction: 1963, turning diameter over bed 390 mm turning diameter over slide rest 190 mm turning length 1000 mm turning dia. in gap 460 mm spindle head DIN 55026 Gr. 6 spindle bore 52 mm turning speed range 11,2 - 2240 U/min Kjdpfx Acsy Tyyqepedu power requirement 7,5 kW bed width 355 mm dimensions 2,8 x 1,3 x 1,6 m weight of the machine ca. 1,9 t Equipment: - Multifix "B" with 5 pic. toolholders - 3-jaw-chuck Ø 250 - coolantsystem - 2-axis digital readout Heidenhain - some jaws