Used Manual Lathe for sale (17,827)

Condition: used, L + Z Lathe WEILER Model Praktikant 800R Machine No. 3309 Year of manufacture: 1984 Centers distance: 800 mm Swing over bed: 280 mm Swing over cross slide: 160 mm Center height over bed: 140 mm Center height over cross slide: 80 mm Spindle bore: 36 mm Feeds: longitudinal and cross Chuck mounting: Short taper DIN 55027 size 5, 4x M10 Tailstock taper: MT 3 Tailstock quill travel: 90 mm Spindle speed: 42 – 2000 rpm Drive power: 1 / 1.6 kW Electrical connection: 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and 8 gear steps - 3-jaw scroll chuck BILSING Ø 160 mm with 1 set of stepped jaws and 1 set of soft jaws - MULTIFIX quick-change toolpost size A with 3 exchangeable toolholders - Live center - Emergency stop - Folding chuck guard Bwodpfx Ajyg Rfief Sjn - Coolant system - Operating manual with electrical schematic - Very low operating hours Required space (L x W x H): 1900 x 700 x 1300 mm Weight: 600 kg Very good condition

Condition: used, L + Z Lathe VOEST ALPINE - WEILER Type DA 210 / 1 Bjdpfeyah Rvsx Af Sown Machine No. 1-004/2581 Year of manufacture: 1984 Centre distance: 1000 mm Swing over bed: 420 mm Centre height over bed: 210 mm Swing over cross slide: 240 mm Centre height over cross slide: 120 mm Spindle bore: 52 mm Spindle speed: 33 - 1500 rpm, 12 steps Chuck flange: short taper DIN 55027 size 6, 4x M12 Tailstock taper: MT 4 Motor power: 5.5 kW Electrical connection: 380 Volt, 50 Hz - Spindle speeds via 12-step gearbox - 3-jaw scroll chuck AROWA Ø 200 mm (only one set of chuck jaws) - Multifix quick-change tool post, size B, with 3 tool holders - Automatic longitudinal and cross feed - Coolant system - Spindle brake - Emergency stop - Splash guard - Fixed steady rest Ø 160 mm - Machine lamp - Operating manual Space requirement (L x W x H): 2200 x 1200 x 1450 mm Weight: 1500 kg In very good condition

Condition: used, L + Z Lathe WEILER Type Praktikant 800R Machine No. 3315 Year of manufacture: 1984 Center distance: 800 mm Swing over bed: 280 mm Swing over cross slide: 160 mm Center height over bed: 140 mm Center height over cross slide: 80 mm Spindle bore: 36 mm Feeds: longitudinal and face Bedjyr R Dcopfx Af Sewn Chuck mount: short taper DIN 55027 size 5, 4x M10 Tailstock taper: MK 3 Quill travel: 90 mm Spindle speed: 42 - 2000 rpm Drive power: 1 / 1.6 kW Electrical connection: 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and 8 gearbox steps - 3-jaw scroll chuck RÖHM ZS Ø 160 mm with 1 set of stepped jaws - MULTIFIX quick-change tool post size A with 3 tool holders - Emergency stop - Hinged chuck guard - Operating manual with electrical diagram Required space (L x W x H): 1900 x 700 x 1300 mm Weight: 560 kg Good condition

Condition: used, L + Z Lathe VOEST ALPINE - WEILER Type DA 210 / 1 Machine No. 1-004/2552 Year of manufacture: 1983 Centre distance: 1000 mm Swing over bed: 420 mm Bwedpjykca Hsfx Af Sen Centre height over bed: 210 mm Swing over cross slide: 240 mm Centre height over cross slide: 120 mm Spindle bore: 52 mm Spindle speed: 33 - 1500 rpm, 12 steps Chuck flange: short taper DIN 55027 size 6, 4x M12 Tailstock taper: MK 4 Motor power: 5.5 kW Power supply: 380 Volt, 50 Hz - Spindle speed via 12 gearbox steps - EMCO 3-jaw scroll chuck Ø 200 mm with turning and boring jaws - Multifix size B quick-change tool post with 3 change cartridges - Automatic longitudinal and face feed - Coolant system - Spindle brake - Emergency stop - Machine lamp - Operating manual Space requirement (L x W x H): 2200 x 1200 x 1450 mm Weight: 1400 kg Very good condition

Condition: good (used), Different tool holders . As we informed, they are used on Biglia CNC lathe. Bjdpfjy Shyisx Af Sown

Condition: good (used), Toolholders bought in company where used for Biglia machine Bwodpsyuyhiofx Af Son

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: G3169-0110, turning length: 530 mm, turning diameter: 420 mm, spindle speed (min.): 20 rpm, spindle speed (max.): 4,000 rpm, spindle bore: 65 mm, travel distance X-axis: 220 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 550 mm, overall weight: 4,700 kg, turning diameter over bed slide: 800 mm, HYUNDAI WIA L200SY CNC TURNING CENTER Year: 2012 | Fanuc 18i-TB CNC Control SN: G3169-0110 • 5-Axis CNC Turning Center – Hyundai WIA L200SY • Main Chuck: 8″ | Sub Spindle: 5″ • Live Tooling & Y-Axis + C-Axis indexing • Max Turning Diameter: approx. 419–420 mm / 16.5″ • Max Turning Length: approx. 520–530 mm / ~20.5–20.9″ • Swing Over Bed: approx. 800 mm / 31.5″ • X Travel: approx. 220 mm / 8.7″ • Z Travel: approx. 550 mm / 21.7″ Bsdpfxsx I A Hcs Af Sjwn • Y Travel: approx. 80 mm / 3.1″ • Max Spindle Speed: up to 4,000 rpm • Main Spindle Power: ~20 HP (~15 kW) • Sub Spindle Speed up to 6,000 rpm • C-Axis indexing: 0.001° possible • Tool Stations: approx. 12 • Coolant system and chip conveyor included • Approx. Dimensions: 120″ × 68″ × 80″ • Approx. Weight: ~10,500 lbs (~4,760 kg) NOTE: MACHINE WAS REMOVED FROM GOOD WORKING CONDITION 2 YEARS AGO. PLANNED TO PUT BACK IN SERVICE BUT SELLER WILL NO LONGER BE DOING MACHINING.

Condition: good (used), Year of construction: 2012, functionality: fully functional, Schiess CNC vertical lathe with C axis, year 1992, retrofitted in 2012 CNC: NUM 1060 FLEXIUM 2 tables, table diameter 2000mm – max turning diameter 2500mm – max table speed 201 rpm – table power 56 KW Load capacity (table included): 16,000kg Movable crossrail with 12 positions, 50mm pitch Available space under spindle nose: min. 795mm, max. 1345mm RAM Z stroke: 1000mm C axis with 360,000 positions – milling spindle max speed 1600 rpm – milling spindle power 22KW – 2 gear ranges Tool magazine: 20 turning tool positions, 35 milling tool positions 1 milling head WIDAFLEX UTS80 Bwodpfx Aoxpqm Rjf Son 1 milling head ISO 50 Renishaw MP60 touch probe (for parts) Tool presetter – Transmit function: G20 / G21 – No rigid tapping Chip conveyor Front door: partial opening M0 / full opening

Condition: excellent (used), Model: 4M/65E Condition: Very good Dimensions: 80.00 (H) x 60.00 (W) x 120.00 (L) inches Additional Description: Bwsdpfoxz Tfasx Af Son - Automatic copy lathe - To make spades, shovels, curling's, gun holders, axes, legs, cricket bats and so on. - Makes 4 pieces at the same time. - Router (no sanding attachment) - Speed regulation on slide. - Works great

Condition: like new (used), DN Solutions PUMA DNT2600L 2024 Model – Only 32 Cutting Hours (Like New Condition) Chuck: 12 inch Max Turning Diameter: 460 mm Max Turning Length: 1078 mm Spindle Bore: 81 mm Spindle Speed: 3,500 rpm Main Motor Power: 26 kW Max Torque: 735 Nm Bwjdpfjy D E Risx Af Sen X-Axis Travel: 260 mm Z-Axis Travel: 1100 mm Rapid Traverse: X 24 m/min – Z 30 m/min Turret: 12 Stations Guideway System: Box Guideway Machine Weight: 4,900 kg Condition: 2024 model, only 32 cutting hours, almost in brand-new condition.

Condition: new, Year of construction: 2025, turning diameter over cross slide: 250 mm, turning length: 730 mm, turning diameter: 500 mm, spindle speed (max.): 1,800 rpm, CNC lathe machine CK 6150 with flat bed We offer a new CNC lathe machine model CK6150. We use this machine in our production and you can see it in operation before ordering. The CK 6150 lathe has a flat bed and hardening guides, which ensures a long period of operation of the equipment. The machine is equipped with a CNC system, the GSK CNC system is installed as standard. Optionally, the machine can be equipped with a Fanuc or Siemens CNC system. The machine can have a tool holder for 4-6 or 8 tools, depending on the customer's wishes. It is possible to install a hydraulic chuck on the machine, which will greatly simplify the process of installing parts on it and a hydraulic tailstock. The CK 6150 lathe can be equipped with additional supporting frame for more accurate manufacturing of long parts. Technical specifications: Model CK 6150 x 1000 Maximum workpiece diameter over bed 500 mm Maximum workpiece diameter over support 250 mm Maximum workpiece length 1000 mm Maximum turning length 730 mm Spindle bore diameter 82 mm Spindle speed 150-1800 rpm Engine power 7.5 kW Mechanical chuck (hydraulic optional) Chuck size 250 mm. 4-position tool holder (6 or 8 optional) Maximum tool size for tool holder 25x25 mm Machine weight 2700 kg Machine dimensions 2650×1700×1820 mm We can also supply lathes CK 6140, CK 6150 and CK 6160 with other dimensions of the working part: CK 6140 dimensions of the working part 550/750 mm CK 6150 dimensions of the working part 1000/1500/2000 mm CK 6160 dimensions of the working part 1000/1500/2000 mm CK 6152E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm Bodpfoxdmgvjx Af Sewn CK 6185E dimensions of the working part 1000/1500/2000/3000/4000 mm CK 61100E dimensions of the working part 1000/1500/2000/3000 mm CK 61125E dimensions of the working part 1000/1500/2000/3000 mm

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 98338601, Year of construction: 2022, operating hours: 140 h, load capacity: 2,000 kg, fork length: 1,150 mm, overall weight: 420 kg, Equipment: UVV, Jungheinrich low lift pallet truck with only 140 operating hours! Starting price reduced to EUR 500, no minimum bid! TECHNICAL DETAILS Load capacity: 2,000 kg Fork length: 1,150 mm Load center: 600 mm MACHINE DETAILS Battery voltage: 24 V (explosion-proof) Battery year of manufacture: 2022 Minimum battery weight: 170 kg Maximum battery weight: 231 kg Drive power: 1.1 kW Dimensions & Weight Bwedpfx Afoy Tk Raj Ssn Dimensions (L x W x H): 1,636 x 720 x 850 mm Weight: 420 kg Operating hours: 140 h EQUIPMENT Battery charger UVV inspection valid until 07/26 Manually operated horn installed Operating manual Inspection certificate

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: W41152A03781, Year of construction: 2010, operating hours: 1,065 h, load capacity: 1,600 kg, fork length: 1,150 mm, empty load weight: 680 kg, total height: 1,300 mm, total length: 1,800 mm, total width: 720 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lifting capacity: 1,600 kg Fork length: 1,150 mm MACHINE DETAILS Dimensions & Weight Bwsdpfx Aezaqn Rof Son Dimensions (L x W x H): 1,800 x 720 x 1,300 mm Self-weight: 680 kg Operating hours (according to display): 1,065 h

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: P21901N93343, Year of construction: 2024, operating hours: 137 h, load capacity: 1,200 kg, lifting height: 5,300 mm, fork length: 1,200 mm, Equipment: UVV, sideshift, TECHNICAL DETAILS Lifting capacity: 1,200 kg Fork length: 1,200 mm Maximum lifting height: 5,300 mm MACHINE DETAILS Mast: Triple Overhead guard height: 2,200 mm Dimensions & Weight Dimensions (L x W x H): 2,500 x 1,270 x 2,300 mm Dead weight: 3,200 kg Operating hours (according to display): 137 h EQUIPMENT Free lift Side shifter Bwodpfx Aszaqggsf Sen Blue Sport tires, front and rear Additional camera system on the forks Lithium-ion battery technology with charger UVV 08/26

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2024, load capacity: 2,500 kg, fork length: 1,580 mm, Auction of two Still EXH-S 25 units, year of manufacture 2024! Serial number of unit 1: W42365N00252 Serial number of unit 2: W42365N00255 TECHNICAL DETAILS Lifting capacity: 2,500 kg Fork length: 1,580 mm MACHINE DETAILS Dimensions (L x W x H): 2,750 x 730 x 1,780 mm Operating hours of unit 1 (according to display): 13.4 hours Operating hours of unit 2 (according to display): 18.5 hours EQUIPMENT Lithium-ion battery technology Blue Spot at the front and rear (unit 1) Bsdpfozap Rqox Af Sjwn Air-sprung operator platform (unit 1) UVV 08/25 (unit 1) UVV 10/26 (unit 2) Note: A charger is not included in the scope of sale and delivery.

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, turning diameter: 220 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 240 mm, travel distance Y-axis: 90 mm, travel distance Z-axis: 580 mm, No minimum price – guaranteed sale to the highest bidder! The new price of the machine was €342,000! Due to inquiries, the auction has been extended by 2 weeks. TECHNICAL DETAILS Max. bore / max. passage: 220 mm Max. turning diameter: 220 mm Distance spindle nose – tailstock center: 614 mm Center distance: 800 mm Travel X1 and X2: 167.5 mm Travel X3: mm Travel Z1 and Z2: 515 mm Travel Z3: 580 mm Travel Y: +45 / -45 mm Rapid traverse X: 30 m/min Rapid traverse Z: 30 m/min Rapid traverse Y: 20 m/min Axis acceleration: 9.8 m/s² Main spindle Max. speed: 4,000 rpm Outer diameter front bearing: 170 mm Inner diameter front bearing: 110 mm Spindle nose: ASA 6" A2 Spindle inner diameter: 72.5 mm Draw tube bore: 66 mm Chuck diameter: 210 mm Chuck bore: 66 mm Spindle power max. / S3 25% / S1: 35.5 / 28.3 / 23.5 kW Spindle torque max. / S3 25% / S1: 205 / 180 / 150 Nm Counter spindle / Sub spindle Max. speed: 4,000 rpm Outer diameter front bearing: 170 mm Inner diameter front bearing: 110 mm Spindle nose: ASA 6" A2 Spindle inner diameter: 72.5 mm Draw tube bore: 66 mm Chuck diameter: 210 mm Chuck bore: 66 mm Power max. / S3 25% / S1: 35.5 / 28.3 / 23.5 kW Torque max. / S3 25% / S1: 205 / 180 / 150 Nm Tailstock / Counter support Morse taper: CM3 Tailstock travel: 580 mm Max. force: 500 kgf Turret / Tool holder Bsdpfx Afjy Ukhho Sewn Number of stations: 24 Tool cross-section: 20×20 / 25×25 mm Tool change time: 0.1 s Clamping force at 45 bar: 3,200 kgf Driven tools Number of rotary stations: 12 Max. speed: 12,000 rpm Power max. / S1: 14 / 10 kW Max. torque max. / S1: 42 / 32 Nm Liquids / Tanks / Supply Coolant tank, side: 510 l Coolant tank, rear: 330 l Hydraulic oil tank: 18 l Lubricating oil tank: 4 l Installed power: 87 kVA Operating voltage: 400 V, 50 Hz ±5% Optional voltage according to table: [230 V, 50 Hz ±5%] Max. ambient temperature: 35 °C MACHINE DETAILS Control model: FANUC 31iPLUS Dimensions & Weight Dimensions (L x W x H): 2,860 × 2,377 × 2,289 mm Total weight: 11,000 kg Internal volume: 1.7 m³ EQUIPMENT Coolant supply through left spindle Hainbuch AXZUG 65 collet chuck (standard) 2702/0008 for left spindle SMW-Autoblok BBD 175 3-jaw chuck 56 with a set of soft jaws for right spindle Measuring arm Hinged band chip conveyor with side discharge Upper turret station (T1) double high-pressure pump (6+15 bar, 55 l/min) Inner turret station (12) double high-pressure pump (6+15 bar, 55 l/min) Machine status light Automatic part unloader Part unloader with pneumatic opening and closing function for catching ejected parts Pneumatic part ejector for counter spindle with 100 mm stroke, stroke adjustment and end position sensor Unimag interface for bar feeder

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 162881, turning diameter over cross slide: 410 mm, turning length: 1,000 mm, turning diameter: 340 mm, spindle bore: 80 mm, rotational speed (max.): 3,800 rpm, TECHNICAL DETAILS Swinging diameter over bed: 530 mm Swinging diameter over carriage/slide: 410 mm Distance between centers: 1,000.00 mm Maximum turning diameter: 340 mm Maximum machining length: 1,000 mm Travel X-axis: 260 mm Travel Z-axis: 1,016 mm Travel X-axis (B-axis): 139 mm Travel Z-axis (B-axis): 965 mm C-axis: 360° Control: Okuma OSP-P200LA Spindle speed: 38–3,800 rpm Speed ranges: stepless, automatic range selection Spindle nose: Option A2-8 Big Bore Spindle bore: 80 mm Main drive motor: 22.37 kW Torque: 412.17 Nm Upper multitasking turret: V-12 NC turret Lower turret: V8 (VDI) Indexing time without lifting: 0.18 s Speed of driven tools: 45 – 4,500 rpm Motor for driven tools: 7.08 kW Feeds X/Z: 333.16 / 416.56 mm/s Feed C: 3.333 rpm Tailstock spindle diameter: 90 mm Tailstock taper: MK #5 Tailstock travel: 120 mm MACHINE DETAILS Machine weight: 8,800 kg Supply voltage: 220/480 V Bedpfxsy U T Dle Af Sjwn Phases: 3-phase Frequency: 60 Hz Rated apparent power: 31 kVA Full load current: 81.7/37.5 A Largest motor rated current: 96 A Short-circuit rated values: 30/10 kA

Condition: ready for operation (used), Year of construction: 2002, operating hours: 53,548 h, functionality: fully functional, machine/vehicle number: 01160014061, turning length: 630 mm, turning diameter: 420 mm, vice opening: 66 mm, control type: CNC control, Equipment: chip conveyor, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working area Turning diameter: max. 420 mm Turning length: max. 630 mm Spindle bore: 66 mm Turret Tool head: 12 tools, Sauter VDI30 CNC control: 4290 Heidenhain MACHINE DETAILS Electrical data Voltage: 400 V Auxiliary voltage: 230 V / 24 V Frequency: 50 Hz Current: 80 A Connected power: 44 kVA Bwsdpfx Afjza D Rfe Sjn EQUIPMENT C-axis with driven tools Machine chip conveyor Documentation 2 driven tool holders External reference: 598

Condition: ready for operation (used), Year of construction: 2010, operating hours: 5,744 h, functionality: fully functional, machine/vehicle number: 6100000012E, turning length: 393 mm, turning diameter: 228 mm, spindle speed (max.): 3,000 rpm, vice opening: 51 mm, Equipment: chip conveyor, No minimum price – guaranteed sale to the highest bidder! Lathe equipped with a tailstock and chip conveyor! TECHNICAL DETAILS Working range Turning diameter: 228 mm Turning length: 393 mm Bodeza D Iwopfx Af Sown Distance between centers: 51 mm Spindle speed: max. 3,000 rpm Turret Turret head: Sauter VDI30 MACHINE DETAILS Electrical connection data Voltage: 400 V Frequency: 50/60 Hz Weight: 3,500 kg Operating hours Power-on hours: 20694 Working hours: 5744 EQUIPMENT Chip conveyor with coolant tank and pumps 3 driven tool holders WTO 4 standard holders VDI30 Tool probe Chuck: Kitagawa 210 mm Tailstock Machine manuals External reference: 603

Condition: excellent (used), Year of construction: 2008, turning diameter over cross slide: 530 mm, turning length: 2,500 mm, turning diameter: 900 mm, spindle bore: 280 mm, spindle speed (max.): 1,120 rpm, spindle speed (min.): 1 rpm, turning diameter over top slide: 530 mm, chuck outer diameter: 600 mm, Weiler CNC Hollow Spindle Lathe Model: E-90 Control: Siemens Year: 2008 Swing Over Bed: 900mm Swing Over Top Slide: 530mm Distance Between Centres: 2500mm Spindle Bore: 280mm Spindle Speeds: 1-1120 RPM Machine With: 4 Way Auto Indexing Tool Post 600mm Front 3 Jaw Power Chuck 600mm Rear 4 Jaw Manual Chuck Bjdpfxozbhc Is Af Sewn 2 Fixed Steadies Various Tooling

Condition: good (used), Year of construction: 2000, functionality: fully functional, Ge Fanuc control 3 jaw 10 inch Pratt and Barnet manual chuck 10HP spindle Quick change tool post Bwjdjzakk Eopfx Af Ssn Tailstock Coolant tank and tray 6 tool holders

Condition: used, Year of construction: 1990, functionality: fully functional, Fanuc OT control 3 jaw Kitagawa chuck 620mm swing 1000mm between centres Bwodpfx Aezakgtsf Son 10 station turret Tailstock Coolant pump and tank Swarf conveyor

Condition: good (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 12020, Fanuc 21i TB control 3 jaw SMW chuck Bodpfx Afozaix Ij Sjwn 720mm swing 2000mm between centres 8 station turret Coolant pump and tank Swarf conveyor

Condition: excellent (used), Year of construction: 2018, 2018 Citizen Miyano BNA-42DHY3 with Fanuc Series Oi-TF Control & Iemca KID 80/16 Bar Feeder Twin spindle, Twin Turret. Axes 'X, Y, Z' (Main) + Sub Spindle Axes. Machining Capability: Simultaneous Front/Back (Superimposed Machining). Maximum Blank Length 100mm. Main Spindle Maximum Bar Ø42mm, Sub Spindle Ø34mm. Axis Travel 'X1'=140mm, 'Z1'=235mm, 'Y'=70mm(±35 mm), 'X2'=140mm, 'Z2'=360mm. Number Of Spindles 2 (Main + Sub). Maximum Main Spindle Speed 6,000rpm (7.5/5.5kW Motor), Sub Spindle 5,000rpm (5.5/3.7kW Motor), Maximum Driven Tool Speed 5,000rpm (1kW Motor). 'C' Axis Standard On Both Spindles (0.001° Resolution). Main Turret 8 Stations, Sub Turret 6 Stations. Turning Tool Shank 20 x 20mm. Internal Tool Holder Ø25mm. Turret Index Time Approx. 0.2 sec. Running Hours 3,696. /No. DW 1241 (2018/09) With Iemca KID 80/16 Type 16 Bar Feeder. S/No.021927QA01 (2019), Cromar Chip Conveyor, Coolant System, Parts Catcher, Parts Conveyor, Quantity Of Driven/Turning Toolholders, Collets, Signal Tower And Manuals. Overall Dimensions L2,240 x W1,450 x H1,680mm. Weight 3,100kg. Bwedey U H Ttopfx Af Sjn

Condition: used, HERBERT 9C-30 TURRET LATHE MAKE HERBERT, MADE IN ENGLAND Bwedpfjy H Hc Esx Af Son MODEL 9C - 30 MAX DIAMETER OVER BED 762.0 mm CHUCK TYPE 4 JAW CHUCK SIZE 630.0 mm MAX DIAMETER OVER CROSS SLIDE 535.0 mm MAX DIAMETER IN FRONT OF CROSS SLIDE 737.0 mm LENGTH BETWEEN CHUCK FACE -TURRET FACE 1505.0 mm TRAVEL OF TURRET 1066.0 mm DIAMETER OF HOLE THROUGH SPINDLE 125.0 mm SPINDLE SPEED 7 – 600 RPM PLUS OPERATOR SAFETY DOOR GOOD RANGE OF ACCESSORIES