Used Slitter for sale (104)

Year of construction: 1999, condition: good (used), Built in 1999 Size max 820 x 1.750 mm Size with continuous feeder max 820 x 1.750 mm min 150 x 150 mm Speed max 205 m/min Length with continuous feeder 7.680 mm Width 3.210 mm Equipment Nedpfxsfbff Uo Abvowd feeder: continuous feeder 1st folding unit: 6 buckle plates motorized setting of buckle plates rear-mounted slitter shafts 2nd folding unit: working width max. 68 cm 6 buckle plates motorized setting of buckle plates rear-mounted slitter shafts peripheral units and deliveries belt delivery

Year of construction: 1997, condition: good (used), Built in 1997 Size 1.300 x 1.650 mm Speed 150 m/min Equipment feeder • pallet feeder (MABEG) 1st folding unit • 4 buckle plates • separate deflectors • soft-pu steeel folding rollers • rear-mounted slitter shafts Nodpfx Absdymm Hjvswd • noise prevention 2nd folding unit • 4 buckle plates • separate deflectors • soft-pu steeel folding rollers • rear-mounted slitter shafts • noise prevention 3rd folding unit • 2 buckle plates • separate deflectors • soft-pu steeel folding rollers • rear-mounted slitter shafts • noise prevention delivery • belt delivery

Year of construction: 1989, condition: used, Pallet feeder 1. folding unit: 6 buckle plates Combination folding rollers Downstream slitter shaft Load protection device 2nd folding unit: 4 buckle plates Combination folding rollers noise protection device 3rd folding unit: Nwedpfx Asbi U Nzebvod 2 buckle plates Combination folding rollers noise protection device

Year of construction: 1994, condition: used, Investors: Nwedpfx Absbi U Rqjved Round stack feeder 1. folding unit: 4 buckle plates Downstream slitter shaft Load protection device 2nd folding unit: 4 buckle plates Laerermschutzeinrichtung accessories: Grooving, perforating, cutting, Shed display

Year of construction: 2002, condition: used, Size max 1.120 x 1.450 mm min 250 x 250 mm Speed max 10-16 m/min Equipment: feeder • pallet feeder (MBO) • MC control 1st folding unit: Nedpfxeddh Evj Abvewd • 4 buckle plates • rear-mounted slitter shafts • noise prevention 2nd folding unit: • 4 buckle plates • rear-mounted slitter shafts • noise prevention 3rd folding unit: • 2 buckle plates • rear-mounted slitter shafts • noise prevention delivery: • belt delivery

Condition: used, Technical data paper roll cutting machine. This machine can only be used for small residual rolls up to a maximum diameter of 400 mm in order to automatically unwind these residual rolls and cut the paper into strips so that it can be better pressed into bales. Manufacturer unknown Type unknown Year of manufacture unknown Dimensions feed table for rolls: Nsdeu Tg Spepfx Abvswd Width inside of rolls 2.195 mm Height inside of castors 465 mm Transport dimensions Feed table over all: 2,650 x 1,300 x 2,150 mm (W x H x D) Dimensions roller cutter: Width cutting shaft inside 2.250 mm Transport dimensions of the roll slitter over all: 3,050 x 1,550 x 550 mm (W x H x D) Remarks: There are no further data or documents available. A viewing is possible by appointment. We assume no liability for the technical data and possible errors.

Condition: excellent (used), Year of construction: 2012, Ref:11059 . 2012 MBO T800/444-RU Folding Machine. Nedpfx Abox U Dc Sovowd Max. sheet size: 82 x 115 cm 16 page+ B1 high speed folding machine with ability to be run by single operator. Equipped with: R800 Round pile continuous feeder Vacu-Infeed for mark free and smooth sheet running Vacu-Alignment MC-Control electronic sheet monitoring including total & batch counting. Combi plates & Pre-slitter shafts on 1st & 2nd units Eye-level control panel FA 46ME presser/stacker/marker delivery Folding sequence: 1st buckle unit 78cm with 4 plates 2nd mobile buckle unit 78cm with 4 plates 3rd 'U' mobile buckle unit 56cm with 4 plates - returns sheet to feed position.

Condition: excellent (used), Year of construction: 2012, Ref:11057 . 2012 Autobond Mini 105 TPHS-FL B1, double sided, fully automatic thermal laminator. Equipped with; Heidelberg deep pile suction feeder with back separation 250mm (10) diameter highly polished chrome laminating rollers Laminating nip pressure up to 6 metric tonnes 2 x Twin Tool Temperature Controllers Sheets are laminated top and bottom in one pass Rubber counter-pressure roller becomes water heated Additional heated roller, quick-change inflatable air-shaft, and perforating mechanism for 2nd roll of film Film is mounted on a quick-change air shaft Trim slitter and perforating mechanism Pneumatic clutch ensures precise film tension Swiss made temperature control unit Sheeter - Integral bump roller separator with anti-curl bar Pallet delivery table Specification: Max sheet size: 106 x 106 cm (41.73” x 41.73”) Nwedpox U A D Usfx Abvsd Min sheet size: 28.5 cm x 32 cm (11.5” x 12.5”) 115 gsm (80 lb text) to 650 gsm (24 pt) Max speed: 60 m/min (200 ft/min) B1 sheets up to 5,000 SPH.

Condition: good (used), functionality: fully functional, Roll slitter type RGS50 – used Condition: good For splitting and crushing wound paper, cardboard, or plastic rolls on cardboard cores - Motor power: 15kW / dual pump 32A / 5-pole – 50Hz-3LNPE - Control: PLC-based, with two-hand safety control - Cutting force: 2x 25t Nwjdpfx Ajyn Aghjbvsd - Blade length: 2500 mm - Max. opening: 1600 mm With roll support stand for increased working height and single-sided roll discharge – roll feed height approx. 1400 mm Factory inspection performed before delivery

Condition: used, Year of construction: 2012, Year: 2012/2013 Condition: dobrý Nwedpfsx Em Avex Abvsd Available: Q1 2026 (february) Configuration: - MBO RBF 520 buffer unit - MBO SVC 521C slitting + cutting unit - MBO DFT 560/6 folding unit - 6 buckles - automatic setup - folding rollers - automatic setup - slitter shaft casette - MBO ASP 66 - shingle delivery + pressing unit - MBO X - FW 50 - mobile knife unit

Condition: new, Year of construction: 2025, We offer customized conveyor belt solutions, whether chain belt conveyors, apron conveyors, sliding belt conveyors as feeders for baling presses, shredders or as extensions for slitter rewinders. Nwodpfoq A S Evox Abvsd Manufactured according to customer requirements, this is a sample offer.

Condition: ready for operation (used), Used can manufacturing line for the production of 73 mm or 99 mm cans. Several compositions of machines are available. Consisting of: - Krupp Sdvt duplex slitter - Soudronic FBB400 welding machine - Soudronic inside powder coating system Nwsdpfxovy Tyxo Abvjd - Outside lacquering system - Frei curing oven - Metalbox 65d spin flanger - FMI A304 beader - FMC 652 seamer

Year of construction: 2008, condition: excellent (used), machine/vehicle number: 081058130, (slitter / cutter / creaser) Power : A4 brochures (cut on 4 sides, creasing centrally) 9 sheets / min. (540 sheets / hour) Format: min: 210 mm (wide) x 210 mm (long) Max: 320 mm (wide) x 650 mm* (long) Gramatur (gr / m) : min 110/ max. 300 Equipment / Additional information: Creasing: 1 x creasing knife across the sheet running direction Nodpfjffx Skjx Abvswd Max. Programmable 10 creases, programmable in steps of 0.1 mm

Year of construction: 2008, condition: excellent (used), machine/vehicle number: 080700467, Counter (m): 0.84 Format (mm): min. 120 x 148 (option 105 x 148) // max. to 350 x 500 Paper weight: 40 - 300 g/m² Equipment / Additional information: Hohner stitching heads Nwsdpfx Ashbu Tuebvod Consist of: -Slitter Cutter Creaser -Inline Bookletmaker DBM 5000 -Auto Spine Master -DBM -500T

Year of construction: 2008, condition: like new (used), PRATI - VEGA PLUS LF330 CNT  Brand / model Prati / Vega Plus LF330 CNT (2008)  Type converting machinery  Year / SN 2008 / LF 020  HS Code 8441 1010 Description:  Slitter  Cutter  Rewinder with inspection and label checking.  Unwind with tension control and single edge guiding.  Pneumatic bars on the splice tables for changing rolls.  Color touch screen operation for all functions, programs and jobs.  For automatic non-stop rewinding (3-spindle turret) and Nsdpfx Aeqnvh Tebvswd cutting rolls (including 12 roll knives and a bar with 14 fixed knives) in register to smaller size rolls.  Waste suction removal.  During the process the labels can be counted (numbers and meters) and checked for quality and missing labels with a missing label system.  Size Min. / max. web width: up 150 - 330 mms  Min. / max. paper weight: 90 - 160 gsm  Roll diameter max. unwind: 1000 mms  Roll diameter max. rewind: 400 mms (280 mm when in use with the 3 shafts turret)  Shaft diameter unwind: 76 mms  Shafts diameter rewind: 12 with different sizes (3×25 mm, 3×40 mm, 3×45 mm, 3×76 mm) Speed: 0 - 200 m/min Electrics 400 V, 3 Ph, 28 kW, 50 Hz. Video link 2:

Condition: good (used), functionality: fully functional, Paper production line consisting of stock preparation, paper machine, inline coaters, offline coater, calander, reeler, offline calanders and slitter winders. Various updates including headbox, top former, press section, offline coater, Voith speedsizer, Voith jet coaters and steambox & ceramic rolls. Characteristics: Capacity: max ~ 240000 T/pa Nwsdpfovptqisx Abved Width: 4800 mm Grammage: 40 – 170 gr/m2 Speed: max 1165 m/min

Condition: good (used), functionality: fully functional, Paper production line consisting of stock preparation, paper machine, inline coaters, calander, reeler, offline calander, slitter winders and reel packer. Fully upgraded by Valmet in 2019, including formmaster, topformer, shoepress, pre-dryer section, inline coating, multinip calender and reeler. Nwedpfsvptbusx Abved Characteristics: Capacity: max ~ 350000 T/pa Width: 7500 mm Grammage: 35 – 170 gr/m2 Speed: max 1400 m/min

Year of construction: 2007, condition: good (used), PRATI LF 330 Machine Type: Label finishing / inspection rewinder Nodpfx Absyrg S Aevswd Year of Manufacture: 2007 Serial Number: LF012 Machine Type Code: LF330-C0-N0-T0-0-0P0-5-009 Location: Germany Condition: Used – good working condition Unwinding Unit • Shaft unwinder for self-adhesive label rolls • Pneumatic expanding shaft • Adjustable tension control • Suitable for narrow web label rolls Web Guiding System • Electronic web guiding system for precise web alignment • Edge guiding sensors installed Inspection Table • Large illuminated inspection table • Designed for visual inspection of printed labels • Enables removal of defective labels during the inspection process Slitting System • Razor blade or shear slitting system (depending on configuration) • Adjustable slitters for multiple lanes • Suitable for narrow label formats Rewinding Unit • Differential rewind shafts • Independent tension control for multiple rolls • Designed for rewinding several finished label rolls simultaneously Control Panel • Operator control panel for machine speed and tension adjustment • Emergency stop and safety control system Safety Equipment • CE certified machine • Safety guards and emergency stop systems installed Maximum Web Width: 330 mm Power Supply: 400 V – 3 Phase Frequency: 50 Hz Installed Power (Pn): 3.4 kW Nominal Current (In): 7 A Maximum Current (Imax): 9 A Short Circuit Current (Isc): 120 kA Machine Weight: approx. 2,200 kg Typical Applications • Final inspection of printed labels • Slitting of narrow web label rolls • Rewinding finished labels into customer roll formats • Converting and finishing of self-adhesive labels Advantages of PRATI Finishing Machines PRATI machines are widely recognized in the label converting industry for their robust construction, precise tension control and excellent operator ergonomics. The LF series allows efficient inspection and finishing of label rolls, reducing waste and ensuring consistent product quality before delivery. Thanks to the reliable web guiding and differential rewind system, the machine ensures

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, machine/vehicle number: K10027, control type: CNC control, degree of automation: semi-automatic, throat depth: 1,000 mm, bending angle (max.): 140 °, Equipment: CE marking, emergency stop, foot remote control, Jorns Long Folding Machine for folding Sheet Metal I have operated this machine from new. It is a very capable and reliable machine made by Jorns of Switzerland who are known to be at the very top of their game. It is capable of folding 1.2mm in steel and 2mm in aluminium. The machine has a 1m insertion depth and four backstops which are adjustable. (there is an option to add more, but we never needed to.) The machine also has a slitter installed for slitting sheets along the full length of the machine to desired width. This is all controlled from the CNC. Nwsdpfx Aox Ilx Ijbvsd The machine was manufactured in 2010. It has the Jorns CNC50 control system which can be programmed with 100 different programs. The machine is very easy on power as all folding movements are hydraulicly driven. Overall the machine is in extremely good condition and can be seen operating until Mid January. Machine comes with safety light curtains. Machine will be ready for collection middle/end of January. I would prefer buyer to collect but if delivery is necessary, it could be arranged as an extra charge. Machine is approx 8m long x 2m wide and weighs approx 7 Tonne. New Jorns machine forces sale.

Condition: used, 1. Decoiler Brand : SCHLOEMANN Type : Hydraulic expanding decoiler Function : Coil holding and controlled rotation Expansion control : Hydraulic Frame : Welded steel base with integrated brake Estimated capacity : 8–12 tons Coil bore : Ø 508 mm ----- 🔹 2. Straightener / Pinch Roll Manufacturer : COMEC (Société de Constructions Mécaniques de Creil) Type : Pinch roll and leveler Control : Mechanical Order number : 1305.1268 Recommended lubricants : Shell Macoma, Tellus, Alvania (as per nameplate) Function : Feeds and flattens strip before slitting Secondary role : Synchronized strip puller ----- 🔹 3. Slitter Manufacturer : COMEC Type : Circular blade slitting machine Drive : Mechanical gear train Blade adjustment : Manual Blades installed : ~10 sets (visible) Function : Longitudinal slitting of metal sheets into narrow strips ----- 🔹 4. Shear (End Cropper) Manufacturer : COMEC STAMCO Type : Rotating or inline shear Function : End cropping or final length cut Control panel : Electromechanical (visible on photo) Machine Application Complete line for metal coil slitting, producing narrow strips from master coils, with upstream flattening and final end cutting. Features / Differences – Heavy-duty hydraulic decoiler by SCHLOEMANN – Mechanical straightening section from COMEC – Manual-adjust slitter with circular blades Nwsdpfow Dd Igex Abvod – Outfeed shear for end trimming or final cut-to-length – Older but industrial-grade line, suited for medium gauge materials

Condition: excellent (used), functionality: fully functional, Year of construction: 1995, The following used system is available for sale. Should this be of interest to you, I will provide further details if required. 2 x 1500 Combined Cutting Line - 22.9. - 06:29 We offer for sale: 2 x 1500 Combined Cutting Line / Cross, Angular, and Longitudinal Shearing. Technical Data: Manufacturer: SCHRÖDER Material width: 1,500 mm Material thickness: 2.0 mm Input coil weight: 10 tons Angle shears: 1,500 x 2.0 mm Rotary shears for cutting: For a coil width of 600 mm: ±50° For a coil width of 800 mm: ±40° Nwjdpfx Asyigrnjbvjd For a coil width of 1,000 mm: ±30° For a coil width of 1,500 mm: ±5° Description: The system separates sheets from coils up to a maximum width of 1,500 mm. The coil scale processes 11 tons of material continuously—crosswise, lengthwise, and at angles. Strip cuts can be slit into 4 parts by longitudinal slitters. The system features a straightening unit with a 5-roll leveller, followed by longitudinal slitters, angle shears, a conveyor belt, and a stacking unit with integrated scale. The entire system is designed for cutting sheets from coils into various blanks and panels. The complete line is mounted on a shared frame measuring approximately 5 x 15 meters. It is maintenance-friendly, energy efficient, and in excellent condition. The system is connected and can be tested and demonstrated. Year of manufacture: 1995

Condition: used, Year of construction: 1994, machine/vehicle number: 940114747, Falzwerk 2. Station Eigensteuerung / Folding Unit 2. Station SelfControl MBO T79-2-81/4Baujahr / Year 1994 - Serial-No. 940114747 4 Taschen Falzwerk / 4 buckles folding unit Arbeitsbreite max. 460mm / Working width max. 460mm Eigensteuerung / SelfControl Nachgelagterte Messerwelle / rear mounted slitter shaft Nsdpfx Abeilx Srsvswd Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1994, machine/vehicle number: 940114747, Falzwerk 3. Station Eigensteuerung / Folding Unit 3. Station SelfControl MBO T79-3-46/2Baujahr / Year 1994 - Serial-No. 940114747 2 Taschen Falzwerk / 2 buckles folding unit Arbeitsbreite max. 460mm / Working width max. 460mm Eigensteuerung / SelfControl Nwedpfoilx Snjx Abvod Nachgelagterte Messerwelle / rear mounted slitter shaft Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1992, Falzmaschine / Folding Machine Stahl KC 78/6-KL 16 Seiten Falzmaschine / 16 pages Cross Fold Year 1992 - Serial-No. 4642/92-19602 Arbeitsbreite max. 780mm / Working width max. 780mm Palettenanleger / Pallet Feeder 1. Station 6 Taschen / 1. Folding Unit 6 Buckles 2. Station 2 Schwerter / 2. Folding Unit 2 knives  Schuppenauslage / Stream delivery Stahl SAK Inklusive Kompressor und Handbücher / Included Compressor and Manuals Soft PU Falzen, guter Zustand / Soft PU Rolelr, good condition Vorgelagerte und nachgelagerte Messerwellen / Front mounted and rear mounted slitter shafts Online-Video-Inspection by Skype-Video Nwsdpfxjvkkils Abvjd We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Round Pile Folding Machine Stahl KC 78/4-KZ for 16 pages Cross Fold Falzmaschine / Folding Machine Stahl KC 78/4-KZ 16 Seiten Falzmaschine / 16 pages Cross Fold Year 1988 - Serial-No. 36526/88-148099 Nwedpfoxlr Afox Abvsd Arbeitsbreite max. 780mm / Working width max. 780mm Rundstapelanleger / Round Pile Feeder 1. Station 4 Taschen / 1. Folding Unit 4 Buckles 2. Station 3 Schwerter (links oder rechts Auslage) / 2. Folding Unit 3 knives (left or Right delivery) Schuppenauslage / Stream delivery Stahl SAK Inklusive Kompressor und Handbücher / Included Compressor and Manuals Vorgelagerte und nachgelagerte Messerwellen / Front mounted and rear mounted slitter shafts Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test