Used Slt 100 for sale (23,458)

Condition: reconditioned (used), stock-No. 2452 1 used, partly overhauled and functionally tested pelletizing line capacity up to 300 kg/h depending material, equipped with: Kreyenborg Force-feeder SW 100, motor 7,5 kW Extruder BKG single-screw Ø 100 mm – 35 LD, motor 132 kW – AC Screw speed up 143 r.p.m. screw depth 14 mm heating power installed 35 kW 1x athm. venting port with „Stuffer“ * Kreyenborg K-SWE 160 RS screen-pack-changer back-flush self-cleaning with filter surface 244 cm² Kodsh Eyd Repfx Am Eedk BKG underwater pelletizing unit AH 300, complete with : diverter-valve , hydraulic unit pelletizer, motor 4 kW incl. die-plate and knife-holder Water pump 2,2 kW By-Pass System, Process water tank heating power 9 kW Heat-exchanger BKG pellet spin-dryer TWE 300 with motor 3 kW control-board and operation panel OPTIONAL against additional price ᐳ * Vacuum pump ᐳ pellet classifier sieve, conveying, Big-Bag Station ᐳ chiller – cooling unit More pelletizing lines ex workhop Wuppertal-Germany available, ask for our most recent machine-stock-list or visit us, you´re welcome.

Year of construction: 2000, condition: reconditioned (used), Stock - No.: 2107 1 used, partly overhauled and functionally tested strand-pelletizer COMAC Type SG-100 SV infeed width 100 mm Cutting Rotor width 110 mm, parallel cut with 32 teeth Rotor- Ø 200 mm Kdjdpfxeiyyc Es Am Esk >> strand-pellet cutting length adjustment 2 drives: 1x for cutting-Rotor - 4 kW 1x for infeed-roller 1,5 kW with STÖBER reduction-speed gear Noise protected housing of pelletizing Chamber Inspection visit / trial-run shortly by appointment possible. We can also offer suitable strand-cooling bath, strandb-blower or pellet classifier ex stock. More strand-eplletizer and other pelletizing systems/units ex our stock availabe ( waterring - , hot-face- and underwater pelletizing )

Condition: reconditioned (used), stock-No. 2452 1 used, partly overhauled and functionally tested pelletizing line capacity up to 300 kg/h depending material, equipped with: Ksdpoi Dtb Ujfx Am Eedk Kreyenborg Force-feeder SW 100, motor 7,5 kW Extruder BKG single-screw Ø 100 mm – 35 LD, motor 132 kW – AC Screw speed up 143 r.p.m. screw depth 14 mm heating power installed 35 kW 1x athm. venting port with „Stuffer“ * Kreyenborg K-SWE 160 RS screen-pack-changer back-flush self-cleaning with filter surface 244 cm² BKG underwater pelletizing unit AH 300, complete with : diverter-valve , hydraulic unit pelletizer, motor 4 kW incl. die-plate and knife-holder Water pump 2,2 kW By-Pass System, Process water tank heating power 9 kW Heat-exchanger BKG pellet spin-dryer TWE 300 with motor 3 kW control-board and operation panel OPTIONAL against additional price ᐳ * Vacuum pump ᐳ pellet classifier sieve, conveying, Big-Bag Station ᐳ chiller – cooling unit More pelletizing lines ex workhop Wuppertal-Germany available, ask for our most recent machine-stock-list or visit us, you´re welcome.

Condition: reconditioned (used), stock-No. 2452 1 used, partly overhauled and functionally tested pelletizing line capacity up to 500 kg/h depending material, equipped with: Kreyenborg Force-feeder SW 100, motor 7,5 kW Extruder BKG single-screw Ø 100 mm – 35 LD, motor 132 kW – AC Screw speed up 143 r.p.m. screw depth 14 mm heating power installed 35 kW 1x athm. venting port ( vacuum-pump optional ) Kreyenborg K-SWE 160 RS screen-pack-changer back-flush self-cleaning with filter surface 244 cm² BKG underwater pelletizing unit AH 300, complete with : diverter-valve , hydraulic unit pelletizer, motor 4 kW incl. die-plate and knife-holder Water pump 2,2 kW By-Pass System, Process water tank heating power 9 kW Heat-exchanger BKG pellet spin-dryer TWE 300 with motor 3 kW pellet classifier sieve control-board and Siemens Touch operation panel (updated ) Kjdped Sg I Isfx Am Esdk OPTIONAL against additional price ᐳ * Vacuum pump ᐳ ,material feed conveying, Big-Bag filling Station ᐳ chiller – cooling unit More pelletizing lines ex workhop Wuppertal-Germany available, ask for our most recent machine-stock-list or visit us, you´re welcome.

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 70 h, load capacity: 1,400 kg, lifting height: 4,450 mm, free lift: 1,534 mm, fuel type: electric, mast type: triplex, construction height: 2,120 mm, fork length: 1,150 mm, empty load weight: 907 kg, total length: 756 mm, drive type: Elektro, construction width: 770 mm, High lift pallet truck Load centre: 600 Mast type: Triplex Technical condition: very good Front tyres type: Polyurethane Front tyres condition: 100% Kdodoy Dkkbopfx Am Eok Rear tyres type: Polyurethane Rear tyres condition: 100% Battery voltage: 24V Battery capacity: 105Ah Battery year: 2021 Description: Factory-refurbished used unit by Toyota including new inspection and new commissioning in accordance with FEM (formerly UVV). Impulse control, full free lift, CE certificate,

Condition: excellent (used), mileage: 493,000 km, power: 460 kW (625.43 HP), fuel type: diesel, tire size: 385/65R22,5, axle configuration: 8x4, wheelbase: 3,900 mm, fuel: diesel, fuel tank capacity: 900 l, brakes: retarder, color: green, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, total length: 8,170 mm, total width: 2,550 mm, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 8,000 kg, permissible axle load (axle 3): 13,000 kg, Year of construction: 2015, Equipment: ABS, AdBlue, air conditioning, retarder, = Additional Options and Accessories = - Leaf suspension - Refrigerator - Air suspension - Air horn - Radio/CD player - Sleeper cab - Sun visor - Toolbox - Central lubrication = Notes = Transmission: Automatic Transmission model: Mercedes PowerShift 3 / Turbo Retarder Clutch Colour: Green Number of cylinders: 6 Wheelbase: 390 cm Fuel tank capacity: 900 l Payload: 27,020 kg Kdjdpfx Aeuu Hi Eom Eok Make: Mercedes Benz Model: Arocs 4163 SLT 8x4/4 VIN: WDB9644161L965401 Year: 2015 Odometer: Approx. 493,000 km Engine: EURO 6 / 15.6 L / 460 kW / 625 hp / 3000 Nm / Diesel / Inline 6 Transmission: Automatic / Mercedes PowerShift 3 / Turbo Retarder Clutch Front axle: 9,000 kg / Steel suspension / Tyres 385/65R22.5 Second axle: 8,000 kg / Air suspension / Tyres 385/65R22.5 Rear axles: 13,000 kg per axle / Steel suspension / Hub reduction / Tyres 315/80R22.5 Wheelbase: 3,900 mm GVW: 41,000 kg GCW: 250,000 kg Equipment: New turbo retarder coupling and gearbox 08-2022 New engine 03-2023 Cross-member for heavy duty coupling, front 50 mm coupling jaw Rocking RO*56E coupling at the rear Jost JSK 38-C1, axial fifth wheel on sliding frame Fuel tank 900 L AdBlue tank 60 L Orange warning lights Work lights Air horn Stainless steel tool boxes Central greasing Marker boards 2x stairs Diamond plate cover = Further Information = General Information Year of manufacture: 2015 Technical Information Number of cylinders: 6 Engine displacement: 15,569 cc Transmission Transmission: Mercedes PowerShift 3, automatic Axle configuration Front axle: Tyre size: 385/65R22.5; Max. axle load: 9,000 kg; Steered; Suspension: leaf spring Middle axle: Tyre size: 385/65R22.5; Max. axle load: 8,000 kg; Steered; Suspension: air suspension Rear axle 1: Tyre size: 315/80R22.5; Twin tyres; Max. axle load: 13,000 kg; Reduction: planet axles; Suspension: leaf spring Rear axle 2: Tyre size: 315/80R22.5; Twin tyres; Max. axle load: 13,000 kg; Reduction: planet axles; Suspension: leaf spring Weights Unladen weight: 13,980 kg Payload: 250,000 kg GVW: 41,000 kg Condition Technical condition: very good Optical condition: very good Financial Information Price: On request

Condition: good (used), Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipping device, forklift tines, forklift forks, forklift forks -Forklift tines: 2 pieces/1 pair -Length: 1600 mm Kdedpfxsyzxals Am Ejk -Cross-section: 100 x 40 mm -Reception: 400 mm (see sketch in the photos) -Transport dimensions: 1750/590/H110 mm -Weight: 118 kg

Condition: good (used), Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipping device, forklift tines, forklift forks, forklift forks -Forklift tines: 2 pieces/1 pair -Length: 1200 mm -Cross-section: 100 x 40 mm -Reception: 400 mm (see sketch in the photos) -Transport dimensions: 1340/585/H105 mm Kdodpfeyzw Rijx Am Eek -Weight: 94 kg

Condition: used, mileage: 260,097 km, power: 463 kW (629.50 HP), first registration: 03/2018, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 8x4, wheelbase: 3,900 mm, fuel: diesel, brakes: retarder, color: black, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2018, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, differential lock, electric window regulation, parking heater, retarder, seat heater, traction control, trailer coupling, = Additional options and equipment = - Remote central locking - Refrigerator - Air suspension - Towing jaw - Microwave - Engine brake - Hub reduction - PTO (Power Take-Off) - Radio - Disc brakes - Sun visor - Spotlights - Auxiliary heater - Toolbox = Notes = Mercedes-Benz Actros 4163 8x4-4 SLT 25,000 kg GCW. Kjdpfx Aey Dccvem Eedk 3.5" adjustable fifth wheel. Rockinger trailer coupling 56 mm. Hydraulic system on engine PTO. Hydraulic connections at rear chassis end 24V NATO plug. Work lights. Toolboxes. Worklights. = Further information = Technical details Number of cylinders: 6 Axle configuration Brakes: Disc brakes Front axle 1: Tire size: 385/65R22.5; Steering; Tire tread left: 50%; Tire tread right: 50%; Suspension: Leaf springs Front axle 2: Tire size: 385/65R22.5; Steering; Tire tread left: 40%; Tire tread right: 40%; Suspension: Air suspension Rear axle 1: Tire size: 315/80R22.5; Twin tires; Inside left: 50%; Outside left: 50%; Inside right: 50%; Outside right: 50%; Suspension: Air suspension Rear axle 2: Tire size: 315/80R22.5; Twin tires; Inside left: 50%; Outside left: 50%; Inside right: 50%; Outside right: 50%; Suspension: Air suspension Weights Unladen weight: 15,200 kg Payload: 25,800 kg Gross vehicle weight: 41,000 kg Financial information Price: On request Identification Type number: 4163 SLT 8x4-4/ 250T / PUSH - PU = Company information = ALL PRICES ARE NET FOR EXPORT. (Joris Versteijnen NL-DE-GB) (Wouter Greutink NL-DE-GB-ES-IT) Govorim po russki. We make every effort to provide correct information, however, no rights can be derived from the listed texts.

Condition: like new (used), Year of construction: 2008, operating hours: 58,000 h, functionality: fully functional, super well-maintained injection molding machine from clean room (pharmaceutical production) - fully functional with functional guarantee - with GEKU SR 500 ST. linear robot - perfect optical condition Technical data Manufacturer Engel Type e-max 200/100 serial number 170609 Year of construction 2008 Operating hours 58774 h approx. Dimensions L/W/H 4.0 x 1.3 x 1.9 mtr. Weight 3,900 kg Fully functional Condition excellent Clean room Special Control unit CC200 Screw ⌀ 25 mm Injection weight 55 gr./hp Injection pressure 2400 bar Injection volume 59 ccm Clamping force 1000 kN / 100 to. Distance between tie bars 460 x 410 Clamping platens 650 x 600 mm mold mounting height 150-450 mm max distance between platens 800 mm Opening stroke 350 mm Ejector stroke / force 100 mm / 25 kN Clamping unit electric Connected load: 45 KW Rated current: 69 A The machine is immediately available in our warehouse in Hanover/Germany and has been tested. Extras GEKU Robot SR 500 ST Simotion control X-axis: 600 mm Y-axis: 1400 mm vertical Z-axis: 2500 mm horizontal A-folding axis: SWM 45 C-axis : Servo Gripper: SWS16 B-axis: not available Guarantee Warranty until first commissioning Loading/shipping FCA-free loading on the buyer's truck or free delivery against freight reimbursement from our warehouse in Hanover /Germany Kdjdpfxsubamvo Am Ejk Financing On request - installment plan option Price: On request

Condition: good (used), Position sensor, valve actuator, valve drive, actuator, servo motor Kdjdpfx Asb Uhr Ujm Esk -Type: T 100 a 502 -Weight: 0.3 kg

Condition: good (used), Cardan shaft, universal joint, universal joint with flange, drive shaft, cardan joint -Cardan shaft: with universal joint Kdedpfjyzfu Asx Am Ejk -Type: Length 290 mm -Flange: Ø 100 mm -Bolt circle: Ø 83 x 9 mm -Dimensions: 290/100/H100 mm -Weight: 6.1 kg

Condition: good (used), Year of construction: 1978, Hydraulic press, two-column press, oil hydraulic press, hydraulic press, high-speed press, high-speed hydraulic press -Manufacturer: Hans Schoen, Hydraulic press type SH 100 -Pressing force: 100 tons -Motor: 11 kW -Clamping table: 580 x 440 mm / Bore Ø 150 mm -Max. insertion height: 435 mm -Projection: 650 mm -Max. stroke: 150 mm Kjdpoyzd I Usfx Am Ejdk -Hole: Ø 50 mm -Dimensions: 1640/1300/H2650 mm -Weight: 4440 kg

Condition: used, - Dimensions: 945x1460x1500mm - Dough capacity: 160kg - Flour capacity: 100kg - Bowl capacity: 260L - Year: 2022 - Serial No.: 000021967 Kodpfsw Ngfqox Am Eodk - 2 speeds - 2 timers - Electric controls - Voltage: 400V - Power: 7.4kW - Weight: 650 kg - Structure: painted steel frame elevated by 4 adjustable feet. - Bowl, spiral, contrast column, and safety guard made of stainless steel. - Two independent 2-speed motors for the spiral and the bowl. - Motion transmission by pulleys and V-belts. - Bowl push roller.

Condition: used, Plasma Cutting Unit HYPERTHERM Type Max 100 Plasma cutter with mechanized torch Machine No. 70-2513 Year of manufacture: 1990 Output: 100 amps = 80% duty cycle Kedpfx Aeyah Saem Eodk 89 amps = 100% duty cycle Cutting capacity: up to 32 mm sheet thickness Continuously adjustable Torch lead length: 22 meters Compressed air connection: 4.7 bar Power supply: 400 V, 50 Hz, 63 amp plug - Torch package with straight torch (without switch) for robotic operation - Separate push-button for starting the plasma cutter Required space L x W x H: 850 x 700 x 1100 mm Weight: 225 kg In good condition

Condition: used, Technical details: faceplate diameter: 1000 mm swing diameter: 1600 mm turning height: 1200 mm main drive: 75 kW faceplate speeds from - to: 7 - 800 U/min milling motor: 25 kW milling head speed: 7 - 3000 U/min milling spindle - taper: ISO 50 cross rail adjustment - vertical: 800 mm ram head dimension: 240 x 240 mm weight of the machine ca.: 40 to dimensions of the machine ca.: 9 x 7,8 x 6,0 m Machine general overhould in 2004 and equiped with Siemens 840 D control - tool changer rack magazine Kedpfxsvb Dcae Am Eodk - C-axis, live tooling, - Transmit function electronical Y-axis - angular milling head - complete splash housing - coolant device, chip conveyor *

Condition: used, operating hours: 11,562 h, total height: 1,900 mm, total length: 5,600 mm, total width: 2,000 mm, Empty weight: 8.500 kg Price: On request - Documentation available: No - CE certificate present: No - Operating hours: 11562 - Drive system: Conventional - Power [kW]: 30.0 - Centre height [mm]: 500 - Swing over bed [mm]: 1000 - Distance between centres [mm]: 3000 - Spindle bore [mm]: 105 - Min. spindle speed [rpm]: 2.24 - Max. spindle speed [rpm]: 450 - Transport dimensions: 5600mm x 2000mm x 1900mm (l x w x h) - Transport weight [kg]: 8500kg Kdjdpfxjwp H Efe Am Eek Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2004, total length: 4,000 mm, total width: 2,200 mm, total height: 2,100 mm, Weight: 9.800 kg Price: On request - Year: 2004 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: B8820 - Drive system: CNC Ksdpfxeyf Hpzj Am Esdk - Drive type: Hydraulic - Power [kW]: 15.0 - Max. sheet thickness [mm]: 8 - Max. working width [mm]: 3100 - Backgauge type: Electric - Backgauge depth [mm]: 1000 - Sheet support system: Pneumatic - Finger guard: Fixed - Angle adjustment: Motorized - Blade gap adjustment: Motorized - Table type: Ball-bearing table - Transport dimensions: 4000mm x 2200mm x 2100mm (l x w x h) - Transport weight [kg]: 9800kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1967, total length: 2,000 mm, total width: 1,750 mm, total height: 2,850 mm, Empty weight: 6.000 kg Kdjdpjx N Sxdjfx Am Esk - Year: 1967 - Documentation available: No - CE certificate present: No - Serial number: 1166 - Drive system: Conventional - Press model: C-Frame press - Press force [ton]: 100 - Max. stroke [mm]: 250 - Table length [mm]: 740 - Table width [mm]: 500 - Ram length [mm]: 250 - Throat depth [mm]: 350 - Transport dimensions: 2000mm x 1750mm x 2850mm (l x w x h) - Transport weight [kg]: 6000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1990, total length: 2,550 mm, total height: 1,600 mm, total width: 1,300 mm, - Year: 1990 - Documentation available: Yes - CE certificate present: No - Serial number: 11584/90 - Main motor power [kW]: 11 - Hydraulic unit power [kW]: 1.1 - Number of shafts [pcs.]: 1 - Opening width [mm]: 800 - Opening length [mm]: 1000 - Sieve perforation [mm]: 20 - Number of fixed knives [pcs.]: 25 - Transport dimensions: 2550mm x 1300mm x 1600mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT Kdjdpfxewmbcyo Am Eok VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1981, total length: 1,100 mm, total width: 1,800 mm, total height: 2,850 mm, Empty weight: 6.000 kg Kedpsxywkqefx Am Eedk - Year: 1981 - Documentation available: No - CE certificate present: No - Serial number: 10340 - Drive system: Conventional - Press model: C-Frame press - Press force [ton]: 100 - Max. stroke [mm]: 160 - Table length [mm]: 630 - Table width [mm]: 550 - Ram length [mm]: 1100 - Transport dimensions: 1100mm x 1800mm x 2850mm (l x w x h) - Transport weight [kg]: 6000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2012, operating hours: 6,586 h, total height: 2,700 mm, total length: 8,100 mm, total width: 2,450 mm, Empty weight: 4.665 kg Price: On request - Year: 2012 - Documentation available: No - CE certificate present: No - Serial number: AA2/001992 - Operating hours: 6586 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 4 - - C-axis present: Yes - └ Milling spindle 2: - - C-axis present: Yes - Type milling table: Beam table - Tool clamping system: HSK-F63 - Material clamp system: Pneumatic - Drilling unit present: Yes - └ Vertical drilling spindles [pcs.]: 2 - Tool changer positions [pcs.]: 12 - System/software: Xilog plus - Safety feature: Door interlock switches, Enclosed fence, Safety mat - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: Becker - └ Type: Vtlf 250 - └ Year of manufacture: 2001 - └ Main motor power [kW]: 5.5 - └ Capacity [m³/h]: 250 - └ Connection diameter [mm]: 70 - └ Vacuum pressure [bar]: 800 - └ Oil free: Yes - Tools included: Yes - CNC options: Manual control, Offcut conveyor - Table length [mm]: 6000 - Table width [mm]: 1300 - Voltage [V]: 400 - Current consumption [A]: 47 - Fuse [A]: 63 - Transport dimensions: 8100mm x 2450mm x 2700mm (l x w x h) - Transport weight [kg]: 4665kg - Transport packages [pcs.]: 1 Kdedpfx Ameyr Iqaj Eok Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 1979, total height: 1,700 mm, total length: 4,900 mm, total width: 1,900 mm, Empty weight: 8.000 kg Price: On request Metal turning lathe Model: Conventional Manufacturer: TOS Type: SU-100 Centerdistance: 2000mm Turningdiameter above bed: 1050mm Spindle-hole: 105mm Motorpower: 22kW Spindle-speed: 2,24-450rpm Max. workpiece weight: 5000kg Kjdpfx Aownhf Rsm Eedk Including 4-jaw-chuck + lynette Machine-dimensions: 4900x1900x1700mm Machine-weight: 8000kg Machine has been tested, in very good condition Video is available - Year: 1979 - Documentation available: No - CE certificate present: No - Serial number: 0429412 - Drive system: Conventional - Power [kW]: 22.0 - Swing over bed [mm]: 1050 - Distance between centres [mm]: 2000 - Spindle bore [mm]: 105 - Min. spindle speed [rpm]: 2.24 - Max. spindle speed [rpm]: 450 - Options: Four-jaw chuck, Fixed steady - Transport dimensions: 4900mm x 1900mm x 1700mm (l x w x h) - Transport weight [kg]: 8000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1990, total height: 2,300 mm, total width: 1,800 mm, total length: 2,800 mm, Empty weight: 3.500 kg - Year: 1990 - Documentation available: Yes - CE certificate present: No - Serial number: 16090455 - Drive system: CNC - Horizontal/vertical: Horizontal - Control system brand: Heidenhain - Power [kW]: 16.0 - Number of axes [pcs]: 3 - X-axis travel [mm]: 850 - Y-axis travel [mm]: 435 - Z-axis travel [mm]: 210 - Table length [mm]: 1570 - Table width [mm]: 500 - Main spindle power [kW]: 3.8 - Options: External cooling - Tools included: Yes - Transport dimensions: 2800mm x 1800mm x 2300mm (l x w x h) - Transport weight [kg]: 3500kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Kdsdpsx Dicmofx Am Eok Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Manufacturer: Gendron Type: RU 28-100 Max. grinding length: 1000mm Max. grinding diameter: 280mm Center-height: 155mm Table: 1660x150mm Grinding wheel: 300mm Machine-dimensions: 2700x1550x1500mm - Documentation available: No - CE certificate present: No Kdjdpewnhkmjfx Am Eok Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum