Used Soap Making Machine for sale (68,410)

Condition: used, Year of construction: 2022, PRODUCT TYPES: • Four side seal pouches • Quad seal pouches • Side seal pouches • Transverse zipper pouches • Gusset pouches • Bottom stick hole pouches • Micro-perforated pouches • Handle hole pouches • Round corner pouches MATERIALS: • LDPE • CPP • MCPP • AL • Nylon • PP • Laminated film structures MAIN TECHNICAL INFORMATION: Material thickness: 60–250 μm Max. web width: 1300 mm Max. roll diameter: 800 mm Core diameter: 3” and 6” Max. pouch width, quad seal: 400 mm Max. pouch length: 1000 mm Eye mark accuracy: ±1 mm Machine speed: 15–65 pcs/min Material speed: 40 m/min Main power: 400V, 50Hz, 3 phase Installed power: 100 kW Machine weight: approx. 18,000 kg Machine size: 33,500 × 4,200 × 1,800 mm POUCH SIZE RANGE: Quad seal / side welded width: 180–400 mm Gusset depth: max. 80 mm Minimum gusset depth: 30 mm Bag length: 360–1000 mm UNWINDING SECTION: • Air shaft unwinding • Magnetic powder brake • Dancing roller tension control • Servo-driven unwind system PERFORATION SYSTEM: • Micro perforation unit • Wheel type perforation • Additional perforation holes • Same type as existing machine configuration FOLDING SYSTEM: • Four side seal / quad bag folding wheel section SEALING AND COOLING SYSTEM: Mechanical press sealing system: Quad seal longitudinal sealing: 2 groups, 1010 mm Quad seal longitudinal cooling: 2 groups, 1010 mm Cross sealing station: 6 sets No. 1: K-seal No. 2: Gusset filling sealing No. 3: Cross seal, 740 mm length / 60 mm width No. 4: Cross seal, 740 mm length / 60 mm width No. 5: Cross seal, 740 mm length / 60 mm width No. 6: Cross cooling, 740 mm length / 60 mm width Additional 5 mm sealing section, upper and bottom PUNCHING SYSTEM: Tear slit / notch puncher 3-hole handle puncher Handle puncher: 20 × 80 mm, 3 sets Hole sizes: • 3 holes Ø20 mm • 20 × 80 mm • 24 × 77 mm Round corner puncher: 2 sets Puncher supports: 3 sets Bottom stick hole puncher: • 12 mm, 8 pcs • 16 mm, 8 pcs Vacuum system for punch waste removal DRIVE SYSTEM: Main motor: 3.5 kW Back draw roller servo: 3.5 kW Front draw roller servo: 3.5 kW Middle draw roller servo: 3.5 kW Longitudinal independent sealing servo: 5 kW × 2 Unwind servo motor: 1.5 kW × 1 / 3.5 kW × 1 Tension control servo: 3.5 kW × 1 Flying knife servo: 1.5 kW × 1 Manipulator sucker drive: 0.75 kW × 1 Finished product carrier counting drive: 0.75 kW × 1 CONTROL SYSTEM: • PLC control • 10” touch screen • Suitable for printed and unprinted bags • 16 temperature control zones • Individual temperature display • Temperature tolerance: ±2°C • High-sensitive eye mark sensor • Adjustable eye mark position Dcsdpfxjzf Nk Ts Apmep STACKING SYSTEM: • Simple type stacking table • Static removal system • Automatic stop when machine stops • Alarm for bag output range: 25–100 bags • Step motor belt control • Belt width: 60 mm • Adjustable batch and belt length SAFETY SYSTEM: • Safety light curtain • Emergency pulling rope • Emergency buttons every 2 meters • Individual emergency control INCLUDED OPTION: ZIPPAK transversal zipper attachment Transversal zipper unwinder and rewinder Innolock / Velcro zipper capability Tooling for 3 zipper sizes: • 180–220 mm • 230–300 mm • 310 mm Micro-perforation holes Bottom stick hole puncher Trim rewinders Chiller

Condition: refurbished (used), Year of construction: 2003, functionality: fully functional, production capacity: 3,650 unit/h, The system has been completely overhauled! TECHNICAL DETAILS Dcsde Agnwaspfx Apmop Capacity: approx. 3,650 pieces/hour Round dough pieces (cut): 40–65 g Long-rolled dough pieces (cut and uncut): 40–65 g Dough piece weight in 3-row operation: 40–85 g Round/smooth dough pieces via pretzel discharge: 40–85 g Processable products Sliced rolls Round and smooth dough pieces Baguette rolls Hotdog buns Bread rolls EQUIPMENT Complete stainless steel design 3-row operation Pretzel discharge

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, input voltage: 400 V, total width: 100 mm, total length: 180 mm, overall weight: 450 kg, König Mini Rex Futura 4000, 2-row small bread dough divider and rounder Drum and pistons SKG54-AKG70 Weight range: 25–140 grams Capacity adjustable from 1,500–4,000 pieces per hour Computer-controlled with 50 programs Djdpfoz I Dnvex Apmscp Year of manufacture: 2006 Machine is in good working order, operating video available!

Condition: used, Year of construction: 1989, MAKE GER, MADE IN SPAIN MODEL RS 10/60 YEAR TABLE LENGTH 1300.0 mm TABLE WIDTH 600.0 mm TRAVEL X AXIS: 1600.0 mm Y AXIS: 600.0 mm Djdey Du N Uopfx Apmscp MAX DISTANCE (TABLE TO WHEEL) 800.0 mm MAX WORKPIECIE WEIGHT 1000 KGS GRINDING WHEEL SIZE 400.0 x 100.0 x 127.0 mm SPINDLE SPEED MAX 1500 RPM MACHINE DIMENSIONS 4600.0 x 2700 x 2600.0 mm MACHINE WEIGHT 7600 KGS PLUS ELECTROMAGNETIC CHUCK SIZE: 1000.0 X 600.0MM HYDRAULIC PACK COOLANT SYSTEM WHEEL MOUNTED DRESSER

Year of construction: 2010, operating hours: 196 h, condition: excellent (used), functionality: limited functionality, bending cheek thickness: 100 mm, additional equipment features: Separate Bending Arm Available, bending radius (min.): 700 mm, The Machine is VERY Sparingly used, Exactly used for bending 196 Bends. Available in Dismantled Condition in Southern Part Of INDIA, for a Very Attractive Price . Dodpjzc Uu Hjfx Apmocp

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, production capacity: 6,000 unit/h, TECHNICAL DETAILS Production capacity: 6,000 pieces/hour Dough weight range: 25–750 g Dough weight range for round and square products: 25–140 g Heading machine Number of rows: 5 / 6 Pre-fermentation unit and shaping station Belt width: 800 mm Topping station Number of topping containers: 2 Belt width: 800 mm Dsds Ah Eyfopfx Apmscp Deposit unit Belt width: 800 mm Sheet size: 800 × 600 mm Sheet size: 800 × 1,000 mm EQUIPMENT Spreader belt between the heading machine and the pre-fermentation unit Shaping station for rolls and hot dog buns Punching unit Cutting unit Topping station with two topping containers Deposit unit for baking sheets

Condition: used, Year of construction: 2012, XYZ Prototrak LPM Vertical Machining Centre (2012) Traverses X Y Z: 785 x 470 x 530mm, Table Size 900mm x 500mm, Spindle Speed 8000rpm, Spindle Motor Power 11kW, Prototrak, Rapid Feed XYZ Axis 20m/min, Spindle Taper BT40, 16-Station ATC. S/No. M7161, Machine Weight: 4200kg. Country of Origin: United Kingdom Location: This lot is located in Leicester, UK. A charge of £200 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. Dcodpfs Ah E Dxox Apmsp

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, - washing machine - assembly station - panel press without gas filling, in good condition (size 2100 x 2500 mm) - knockdown table Dcedpfx Aj Ah Rc Nepmsp - year: 2006 - line length: 16.5 m - direction: right-left The ISO line is in good condition and is fully operational.

Condition: new, functionality: fully functional, color: other, Year of construction: 2026, Equipment: cabin, hydraulics, The BS-25 concrete block making machine is an excellent solution for plants producing concrete blocks, bricks, paving stones, and bims, offering high efficiency and flexible production capabilities. Developed in line with modern production concepts, this machine can easily produce various products such as paving stones, curb stones, and hollow blocks using different molds thanks to its single-layer structure. Thanks to its scalable facility structure, investors can quickly and economically increase their production capacity according to their needs. The BS-25's fully automatic PLC control system allows a single operator to manage the entire production process. The touchscreen LCD control panel offers the ability to monitor and print production data in real time with its user-friendly interface and advanced reporting system. With its remote access feature, the system can be controlled via LAN or internet connection, allowing for easy detection of potential malfunctions and remote software updates. This smart automation technology ensures consistent quality and maximum production in every shift. BS-25 - Concrete Block Machine Technical Specifications Production Capacity: 110–120 pallets/hour Pallet Size: 1,200 x 980 x 230 mm Control: PLC Automation System (Schneider) Bunker Capacity: 1.5 m³ Hydraulic Oil Capacity: 500 liters Upper Vibration: 3 kW x 2 Lower Vibration: 4 kW x 4 Total Electrical Requirement: 150 kW Total Vibration Power: 30,000 Dcjdexp Uurepfx Apmsp Production Capacity in 8 Hours: 10,000 concrete blocks / 25,000 interlock blocks Why Should You Choose the BS-25 Concrete Block Machine? CONSTMACH stands out in the production of concrete block, brick, and paving stone making machines with its reliability, engineering quality, and after-sales support. The BS-25 model reduces your production costs while increasing your capacity with its energy-efficient design, long-lasting components, and smart control system. Each machine is delivered after passing quality control tests and can be customized upon request. For investors seeking high durability, minimal maintenance requirements, and world-class production performance, the BS-25 is a symbol of long-term profitability and reliability. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Vertical insulating glass production line for max. glass sizes : 3500 x 2500 mm working size : from right to left min. glas size : 380 x 150 mm glass thikness : 2,3 - 17 mm IG element thikness : 12-60 mm - vertical glasswashing machine with 6 brushes - frame setting station - gasfilling press - tilting station - vertical sealing robot - butylextruder LBH 25 V - frame bending machine BSV 30 K , max. frame : 4400 x 2200 mm , min. 240 x 170 mm Dsdpfxj Ahyaaj Apmecp alu-steel , chromatec ultra , workign direction from left to right - desiccant filling machine A1RL max. frame : 2500 x 1200 mm , min. 150 x 150 mm , for alu spacer 6-24 mm

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, total length: 35,000 mm, total height: 3,500 mm, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, Bystronic IG production line for glass units Maximum size: L4200 x H2700 Minimum size: 180 x 350 mm (double, triple, and shaped glass) An automatic butyl extruder can be offered as an option. Dcedpfezxx Etjx Apmsp Contact us at 0032479588591 to arrange a visit.

Year of construction: 2021, condition: excellent (used), functionality: fully functional, Equipment: CE marking, We offer this machine in very good condition: Zhou Tai AMD650Z, a bag-making machine, manufactured in 2021. Djdszy Ig Aopfx Apmjcp Manufacturer: Zhou Tai Model: AMD650Z Year of manufacture: 2021 Condition: very good Type of machine: Bag-making machine If you have any questions or require further information, please send us a message or contact us by phone.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, IN EXCELLENT CONDITION - ORIGINAL PAINTWORK XYZ SMX 3500 CNC TURRET MILL PROTO TRAK CONTROL 3 AXIS CONTROL TABLE SIZE 1370 X 356 MM TRAVELS - X 770 / Y AXIS 500 / Z 500 MM Dcodsz Eh Egjpfx Apmep 40 TAPER SPINDLE QUILL DIA 100 MM AIR DRAW BAR SPINDLE SPEED 40 - 5000 RPM TABLE GUARDS WEIGHT 2.4 TONS THERE IS ONE TOOL IN THE SPINDLE THAT WILL GO WITH

Condition: used, Year of construction: 1987, functionality: fully functional, shaft length under head: 160 mm, thread length: 85 mm, total width: 2,800 mm, total length: 7,800 mm, bar diameter (max.): 16 mm, Machine is complete bolt making machine with pointing and threading. Dcodpfsztrpnex Apmsp

Condition: used, Year of construction: 2014, functionality: fully functional, input voltage: 400 V, overall weight: 2,200 kg, type of input current: AC, Equipment: documentation/manual, We are offering this used LISEC LBH-25AR insulating glass manufacturing machine, manufactured in 2014, for sale. Serial/drawing number: 572-074946 Weight: 2,200 kg Rated current (full load): 10.0 A Apparent power: 7.00 kVA Voltage: 400 V Frequency: 50 Hz Short-circuit strength: 10 kA Pressure: 6.00 bar Degree of protection: IP32 Maximum current: 1.4 A AC/DC voltage: 400 / 24 V Dsdpfx Apezmn Iyjmscp If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, total width: 2,500 mm, total height: 3,500 mm, input voltage: 400 V, feed length X-axis: 2,500 mm, feed length Y-axis: 3,500 mm, overall weight: 3,550 kg, type of input current: three-phase, power: 17.06 kW (23.20 HP), Equipment: documentation/manual, Used Lisec VL-1N/25 insulating glass manufacturing machine for sale, year of manufacture: 2009. Type: VL-1N/25 Serial number: 361-053012 Weight: 3,550 kg Total load current: 24.60 A Apparent power: 17.06 kVA Voltage: 3/N/PE-50Hz 400 V Pressure: 6.00 bar Maximum material load: 250 kg/m Auxiliary current: 8.0 A AC/DC voltage: 400 / 24 V LISEC VL-1N/25 automatic thermal insulating glass sealing robot – 2500 x 3500 mm. Automatic edge sealing machine designed for applying secondary sealant to thermal insulating glass units. The machine consists of an infeed and an outfeed section, as well as a discharge station. A separate measuring unit located in front of the machine measures the thickness of the glass panes, the air gap between them, and the total thickness of the thermal insulating glass unit. Dcodpjz Nkh Tofx Apmep The top edge of the thermal insulating glass unit is guided by a horizontal roller beam. This allows the glass units to pass at a defined distance in front of the back panel in the sealing sections. They are transported using a patented, wear-resistant conveyor chain, which supports the lower edge of the unit only minimally, leaving the sealing groove free for the application of the sealant. A linear-guided vacuum suction system integrated into the back panel ensures that the thermal insulating glass units are transported without slipping. The machine can also process polyurethane in 200-liter containers of component "A" + 20-liter containers of component "B", as well as silicone in 200-liter containers of component "A" + 20-liter containers of component "B". The machine can be viewed in operation and will be dismantled in mid-January. If you have any questions or require further information, please send us a message or call us.

Condition: excellent (used), Year of construction: 2017, XYZ 2000 Turret Milling Machine (2017) (Ex College) 3 Axis Newhall DRO (X, Y & Knee) Spindle Taper R8 Spindle speeds to 500 – 4200 rev/min Table Size 1270 x 254mm Table Travel: X - 812mm Y - 406mm Knee Travel: Z - 406mm Quill Travel Z - 127mm For sale with Jet Machinery Ltd Jet Machinery Stock No: #79047 Machine Serial Number: 12907 Cost: £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Dsdpfx Aexxb Rrjpmjcp Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: L-232.0495, total length: 12,000 mm, input voltage: 400 V, feed length X-axis: 2,300 mm, feed length Y-axis: 2,500 mm, type of input current: three-phase, Equipment: documentation/manual, Automatic butyl extruder in excellent condition, technically refurbished by Glaston in 2025. Upgrades to the operating panel and replaced parts are listed; please contact us for more information. Dcodpfxezw Erwj Apmep Maximum size: 2300x2500mm Minimum size: 250x250mm, but not suitable for Georgian bars.

Condition: used, Year of construction: 2009, Production: • Bag type: Bottom seal bags • Suitable products: o Garbage bags o Fruit and vegetable bags o Various types of plastic bags Materials: • Processable materials: o LDPE o HDPE o MDPE Technical Specifications: • Maximum sealing width (bag width): 1200 mm • Bag length (draw length): 150–3400 mm • Number of lanes: 1 Dcedszk H E Sepfx Apmsp • Maximum linear speed: 150 m/min • Maximum production speed: Up to 50 bags/min Control System: • PLC controlled • Operator interface terminal (HMI) • Print registration control • Servo-driven sealing bar Equipment: • Unwind unit • Photocell • Anti-static bars

Year of construction: 1996, operating hours: 700 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 1000114, For sale: ANTON ZAHORANSKY Z1E toothbrush manufacturing machine. It has been well-maintained, is fully functional, and has 700 operating hours; it is available for testing. Price: 35,000 euros. Dcjdpfx Apj Agcltsmjp

Condition: new, functionality: fully functional, color: other, Year of construction: 2026, Equipment: cabin, hydraulics, The BS-25 concrete block making machine is an excellent solution for plants producing concrete blocks, bricks, paving stones, and bims, offering high efficiency and flexible production capabilities. Developed in line with modern production concepts, this machine can easily produce various products such as paving stones, curb stones, and hollow blocks using different molds thanks to its single-layer structure. Thanks to its scalable facility structure, investors can quickly and economically increase their production capacity according to their needs. The BS-25's fully automatic PLC control system allows a single operator to manage the entire production process. The touchscreen LCD control panel offers the ability to monitor and print production data in real time with its user-friendly interface and advanced reporting system. With its remote access feature, the system can be controlled via LAN or internet connection, allowing for easy detection of potential malfunctions and remote software updates. This smart automation technology ensures consistent quality and maximum production in every shift. BS-25 - Concrete Block Machine Technical Specifications Production Capacity: 110–120 pallets/hour Pallet Size: 1,200 x 980 x 230 mm Control: PLC Automation System (Schneider) Bunker Capacity: 1.5 m³ Hydraulic Oil Capacity: 500 liters Upper Vibration: 3 kW x 2 Lower Vibration: 4 kW x 4 Total Electrical Requirement: 150 kW Total Vibration Power: 30,000 Production Capacity in 8 Hours: 10,000 concrete blocks / 25,000 interlock blocks Why Should You Choose the BS-25 Concrete Block Machine? CONSTMACH stands out in the production of concrete block, brick, and paving stone making machines with its reliability, engineering quality, and after-sales support. The BS-25 model reduces your production costs while increasing your capacity with its energy-efficient design, long-lasting components, and smart control system. Each machine is delivered after passing quality control tests and can be customized upon request. For investors seeking high durability, minimal maintenance requirements, and world-class production performance, the BS-25 is a symbol of long-term profitability and reliability. What Do We Do at Constmach? Dsdpfx Ajxpi T Aepmecp Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: used, Year of construction: 2022, Lippelt Mini Rustica Touch GST roll production line Suitable for the production of ciabatta and corner/special rolls Dcjdpfoz A Ryhex Apmjp Dough throughput up to 300 kg per hour Year of manufacture: 2022 Condition: inspected & cleaned Stainless steel housing Touchscreen control with recipe management Equipped with a guillotine and shaping die Saw station, type: Rumo 7 Includes 3 cutting rollers (for 1-4-row production) Includes 2 stamping dies Additional accessories available upon request.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, operating hours: 200 h, power: 4.5 kW (6.12 HP), input voltage: 380 V, type of input current: three-phase, travel distance X-axis: 1,800 mm, travel distance Y-axis: 4,500 mm, travel distance Z-axis: 1,050 mm, number of axes: 4, controller manufacturer: Syntec, total height: 3,600 mm, total length: 5,800 mm, total width: 2,440 mm, overall weight: 2,600 kg, table length: 5,400 mm, table width: 2,030 mm, For sale is a large-format, 4-axis CNC portal milling machine from Yishun, privately owned. With its enormous working area and 1050 mm Z-axis, the machine is ideal for the precise machining of large components made of foam (Ureol/Styrodur), plastics, wood, and aluminum (e.g., for mold making, boat building, or prototype construction). The machine has only been in operation for approximately 200 hours (year of manufacture 2016) and will be handed over in perfect mechanical and electrical condition. High-quality industrial components have been used throughout. TECHNICAL DATA & COMPONENTS: • Working area (X/Y/Z): 1800 mm x 4500 mm x 1050 mm • External dimensions: approx. 5800 mm x 2440 mm x 3600 mm (L x W x H) • Weight: approx. 2600 kg • Spindle: High-quality HSD spindle • Drives: Reliable, powerful Yaskawa servo motors • Controller: Syntec controller (machine can be moved on-site) • Guides & Mechanics: HIWIN linear guides, WMH rack and pinion with precise Rouist gears on the servo motors, ball screw in the Z-axis feed • Equipment: Integrated zero-point sensor for the Z-axis. Post-processors for HSMtec are available to a limited extent. • Reference: The finely finished aluminum milling sample produced on the machine, shown in the video, is available (see photos). • Note on scope of delivery: The machine does not have an automatic tool changer, dust extraction system, or vacuum clamping table. CONDITION & HISTORY: Dsdozv U Tbepfx Apmjcp The machine has been unused but stored dry in a hall for the past few years. To consistently prevent the onset of surface rust due to natural humidity in the winter, the steel structure was recently preventively re-primed and painted. The guides are completely free of rust and have been regularly preserved. The machine runs perfectly mechanically and electrically. IMPORTANT INFORMATION REGARDING TRANSPORT & PICK-UP: 1. Private sale: The sale is made by a private individual, excluding any liability for defects, warranty, or right of return. No VAT can be charged. Purchased as seen and tested. 2. Loading assistance on-site: A suitable forklift will be arranged and can be used free of charge for loading onto your low-bed trailer or truck. 3. Transport options: The machine is primarily intended for self-collection. Delivery within a close radius (up to 50 km) is possibly possible after prior arrangement and upon payment of costs. If transport over longer distances is an issue, we will certainly find a joint solution after prior consultation or provide assistance in finding a freight forwarder. We are open to realistic price offers. An inspection and demonstration of the axes on-site in 91183 Abenberg are welcome after prior arrangement.

Year of construction: 2016, condition: used, • Machine length: 13,300 mm • Machine width: 3,300 mm • Web width: 600 mm • Operating voltage: 200 VAC, 50/60 Hz, 3-phase • Power rating: 62 kVA • Current: 179.1 A • Maximum output with stacking system: 180 cycles/min • Main operating side: left side, facing the direction of travel Production Capabilities: • Three-sided sealed pouches • Stand-up pouches with elliptical bottom (Doypack) • Pouch width: 60–250 mm • Pouch length: min. 110 mm, max. 270 mm (two lanes), max. 540 mm (single lane) • Bottom gusset: 40–90 mm (extended, including edge trim) • Processable materials: PP/PE, PET/PE, PET/ALU/PE • Film thickness: 80–250 µm Equipment: • Parent roll unwinder with web edge control • Unwinder with winding shafts for 76 mm and 152 mm cores • Maximum clamping width: 1,200 mm • Maximum roll diameter: 800 mm • Bottom gusset strip unwinders for 76 mm cores • Maximum clamping width for bottom gusset strips: 160 mm • Maximum roll diameter for bottom gusset strips: 800 mm • Fine dust extraction for bottom gusset strips • Punching waste extraction for bottom holes • Cooling unit for cooling stations • Transformer for operation on a 400 V power supply • Bottom sealing with cooling, individual sealing process • Electrically adjustable top-sealing station • Automatic registration adjustment to the printed image Dedpfxo Adl H Ss Apmocp • Two draw rollers • Cross-sealing unit with six sealing stations and three cooling stations • Punching station for hanging holes with two punches • Punch holder for knives up to 260 mm wide • Complete punching of the pouches from the film web • Pouch stacking unit with discharge conveyor • Packing table and roller conveyor • Punching grid rewinder with two winding positions

Year of construction: 2015, condition: excellent (used), PLASTIC BAGS MAKING MACHINE VAMA VC 600 Germany made in 2015. Dcodeg D Arnspfx Apmsp Technical data Manufacturer: VAMA GmbH Model: VC 600 Production year: 2015 Technical parameters The width of the film maximum: 600 mm The maximum length of the bag: 1200 mm Film thickness: 25-80 μm weld Capacity: 60 - 90 bags per minute Rolling rollers 2 with roll diameter: 700 mm Stacking position: 25-50 pieces Machine for the production of plastic bags Excellent condition, located in Poland