Used Wood Working Machines for sale (75,057)

Condition: new, Wood briquetting press Amis ABP 60 L -Exhibition machine- ----- Technical data ----- Briquette Ø: 60 mm, Hydraulic unit 3 kW: 140 bar, Voltage: 400 V, frequency: 50 Hz, Fuse protection: 16 A, Capacity approx.: 20-35 kg/h, Weight approx.: 300 kg - Easy handling - Hydraulic control - Briquette diameter 60 mm - Briquette length adjustable as required (max. 60 mm) Rsdpfx Asu R Sxxedzeu - Motor equipped with motor protection switch and emergency stop - No electronic components such as regulators, sensors and sensors or complicated controls - Large storage container - Tempered briquette tongs - Replaceable press bar - Pressing without the addition of additives - Thanks to the pre-compressor, even voluminous chips can also be processed - No adjustment work or pressure monitoring of the pressure necessary - New exhibition machine -

Year of construction: 2019, condition: ready for operation (used), This 5-axis COSMEC CONQUEST 515/13 was manufactured in 2019. A robust CNC Wood Machining Centre, it features a working area of 6210 × 1650 mm, dual motorization on a closed gantry structure, and a spindle power up to 18 kW. It supports tool changes with multiple configurations and is compatible with ALPHACAM and ASPAN software. Consider the opportunity to buy this COSMEC CONQUEST 515/13 CNC Wood Machining Centre. Contact us for more information about this machine. Application Types Rodpfx Aox S Si Ijdzou CNC Wood Machining

Condition: ready for operation (used), Sawn timber capacity: 1.5m³, max. sawn timber length: 4500mm, with control system, aluminum stacking strips and cables as accessories. The system has not been in operation for approximately ten years, the electronics would need to be checked. An on-site inspection is possible. Rjdoy Uydlspfx Adzeu

Condition: excellent (used), Catalogue number 7321 TECHNICAL DATA - Max workpiece height: 90 mm - Max workpiece width: 130 mm From above: - Sliding belt - Sanding units – 2 brushes - Brush motors: 2 × 0.55 kW - Manually adjustable brushes (up/down) From below: Rjdey Tkhxopfx Adzju - Feed belt - Sanding units – 2 brushes - Brush motors: 2 × 0.55 kW - Manually adjustable brushes (up/down) From the side: - Sanding units – 2 brushes - Brush motors: 2 × 0.55 kW - Manually adjustable brushes (up/down, front/back + angle) - Brush diameter: 220 mm - Stepless speed adjustment of sanding units via inverter - Stepless feed belt speed adjustment - Feed motor: 0.55 kW - Pull-out support table - Extraction port diameter: 3 × 120 mm - Overall dimensions (L/W/H): 2200 × 1200 × 1400 mm - Weight: 672 kg ADVANTAGES – Italian-made – 6 sanding units – Used sander – In very good condition Net price: 22,900 PLN Net price: 5,450 EUR (based on exchange rate of 4.2 EUR) (Prices may vary according to larger exchange rate fluctuations)

Year of construction: 2025, condition: new, Demo machine Year of manufacture: 2025 Travel range: 2500x1300x200mm Machine frame in 19mm Forescolour, consisting of milling table (X-axis), gantry (Y-axis), Z-axis unit in compact board, and base frame with adjustable machine feet. Milling bed as sacrificial board in 19mm MDF. Table openings longitudinally and transversely pre-configured. Mechanical set consisting of profile rails including profile rail carriages, ball screw and precision rack gears. All components assembled, pre-lubricated including test run, immediately ready for operation. Control set consisting of control cables, energy chains, planetary gears, stepper motors, high-performance drivers, power supply and toroidal transformer, all preinstalled in the control cabinet, as well as sensors for each axis. Control relay for automatic actuation of the existing extraction system. Brush seals for dust protection and protective equipment compliant with CE regulations: includes moving extraction unit and one-sided mounted laser scanner for work area monitoring, with 275° and 5.5m field range. (Machine positioned in a room corner) Manual control panel equipped with all necessary machine functions, including emergency stop and dead man’s switch. Tool length sensor for determining tool length and active offset of the reference point. High-frequency spindle with 2.2 kW, incl. clamping nut, frequency inverter, power filter, breaking resistor, and collet set. Rodpexc Rmqjfx Adzou Built-in monitor, incl. mini PC with Windows 11, control software Beamicon2, mouse and keyboard, pre-installed in an ergonomic console. CAD license Rhino 8.0 and CAM license Estlcam V12, as well as all necessary documentation, will be sent by email prior to delivery. Includes milling bed designed as a vacuum table, consisting of four individually controllable segments. Cross table made of PE with top layer in MDF. Becker vacuum pump with a capacity of 100m³/h, oil-lubricated. A 16 Amp, 400 V AC plug is required for the vacuum pump electrical connection. The customer must provide HDF 3mm raw on both sides for the whole vacuum table (2500x1300mm) as a sacrificial board. (Recommended application: machining of coated wood-based panels) Includes 10-piece tool set consisting of: 3 pcs. 5 mm Z2 (HF52REVHM) 6 pcs. 4 mm Z1 (HF41REVHM) 1 pc. 5mm Z3 (HF53SRECAR) (Tool selection can be adapted as needed) Includes maintenance package in systainer: - 150 ml grease gun - 400 g cartridge high-performance grease - 500 ml can of silicone spray grease - Grease nipple incl. hose and 30mm face mill with indexable inserts Availability: short notice Location: Flörsheim

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 271 - 46, working width: 500 mm, Herzog Heyman standing version, available for immediate delivery Rsdpfx Adey D Niiszju

Condition: used, Year of construction: 2016, machine/vehicle number: 7405_408, functionality: fully functional, operating hours: 788 h, HOLZ-HER Evolution 7405 White Edition CNC Machining Center For sale is a very well-maintained HOLZ-HER Evolution 7405 White Edition, year of manufacture 2016. The machine is in excellent technical and visual condition and can be demonstrated under power. A particular highlight is the exceptionally low processing time: only 788 hours with active feed. The machine was professionally serviced and completely recalibrated by the manufacturer in 2021. Since then, it has seen only limited use and runs smoothly, precisely, and reliably. Technical Data Manufacturer: HOLZ-HER Model: Evolution 7405 White Edition Year of manufacture: 2016 Serial number: 7405_408 Software / Controls CAMPUS Version: 6.4.4.2 NC-Hops Version: 6.6.2.207 Operating Hours Active feed / Processing hours: only 788 h Machine ON: 6,723 h Features 4-MAT configuration Drilling unit with 15 spindles Saw and grooving unit Milling unit with 6-position tool changer Handheld control device Vertical and horizontal processing Vacuum clamping system Ideally suited for: Furniture production Interior fittings Kitchen construction Joineries CNC entry or capacity expansion Condition Very well-maintained overall condition Regularly serviced Rodey Sicxopfx Adzsu Professionally recalibrated by the manufacturer in 2021 Minimal use since recalibration Immediately ready for operation Runs very cleanly and precisely No known technical defects Machine can be inspected and tested during operation Availability Available from calendar week 25 / 2026 Inspection possible by appointment Support with loading and transport organization available Price Asking price: €43,900 net

Condition: used, Year of construction: 2000, machine/vehicle number: AA1/11510, functionality: fully functional, operating hours: 19,250 h, power: 7.5 kW (10.20 HP), input voltage: 400 V, input frequency: 50 Hz, travel distance X-axis: 3,080 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 280 mm, workpiece length (max.): 3,080 mm, workpiece width (max.): 1,200 mm, number of axes: 3, number of slots in tool magazine: 12, total height: 2,346 mm, overall weight: 4,000 kg, Equipment: CE marking, documentation/manual, We are offering this used SCM Record 130 machining center, year of manufacture 2000. Equipped with a more powerful vacuum pump (2050 m³/h), vector rotary axis, angle gearbox adjustable from 0 to 100 degrees (HSK63), drilling unit with 9 spindles, and low operating hours. If you have any questions or require further information, please feel free to send us a message or call us. Rodpfx Adsyzadrozju

Condition: used, Year of construction: 2001, power: 25 kW (33.99 HP), input voltage: 380 V, input frequency: 50 Hz, overall weight: 5,000 kg, We offer this used P. BACCI DOUBLE vertical woodworking machining centre, year of manufacture 2001. Model: DOUBLE Serial number: AB001 Year of manufacture: 2001 Voltage: 380 V Rjdpjyx S Svefx Adzju Frequency: 50 Hz Power: 25 kW Weight: 5000 kg If you have any questions or require further information, please do not hesitate to send us a message or call us.

Year of construction: 2021, condition: new, functionality: fully functional, A used one is for sale Felder Milling machine F-900 Z with tenoning and slotting table length 1300mm The machine is inot used at all and therefore in mint (new) condition. Rjdpfx Aoy Iyvnodzou Technical data: - 5 milling speeds - Milling spindle swivels 90° - 45° - Milling stop for tools up to Ø 230mm - Multi-adjustment system - Tapping and slotting table 1300mm - electrically height-adjustable + swiveling "PowerDrive" - Engine power 7,3kW SD start

Condition: good (used), Year of construction: 1982, functionality: fully functional, Table dimensions: 1400 x 1000 mm Table rotates from 0 to 360 degrees Spindle taper: ISO40 Spindle swivels Minimum spindle speed: 90 rpm Maximum spindle speed: 2880 rpm Machine height: 3260 mm Machine length: 2650 mm Rodpfjy Iwf Hsx Adzou Machine width: 2600 mm Machine weight: 5100 kg Accessories, equipment: - Built-in rotary table - Rapid traverse - Motorized height adjustment - Machine light The machine is in very good condition.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, power: 8 kW (10.88 HP), input voltage: 400 V, input frequency: 50 Hz, Equipment: documentation/manual, OPTIMAT BHX055 Redpfx Aeyvh Dpedzju

Year of construction: 2010, condition: used, functionality: fully functional, Elumatec SBZ 130 CNC-controlled milling machine, 7,000 mm version Rodpfx Ajyr Rubjdzsu 8 clamps Tool changer with 8 positions on the milling head

Condition: good (used), Year of construction: 1992, Single-piece sanding machine sanding from top and bottom electric height adjustment with digital display continuously variable feed speed star/delta starter pneumatic belt tensioning main switch sanding belt oscillation finishing brush unit top and bottom, manual height adjustment Working width: 190 mm Working height: 4 - 150 mm Min. workpiece length: approx. 280 mm Abrasive belt dimensions (L x W): 1850 x 200 mm Feed speed: 5 - 25 m/min Installed power: approx. 14 kW Extraction port diameter: 2 x 180 mm Dimensions (L x W x H): 2000 x 1000 x 2050 mm Weight: approx. 1800 kg Incl. infeed and outfeed roller conveyor (L = 1600 mm, non-driven) Note on used machines: • Technical data subject to errors and prior sale. • Quoted prices are ex-works – loaded free of charge! • The machines have been cleaned and function-tested. Redpfxjwyda Uj Adzsu • All machines are sold as inspected, with no claims to warranty. Buyers are welcome to inspect machines at the location. • Special agreements are only valid in written form. (We answer inquiries only when your address and telephone number are provided!)

Condition: new, Year of construction: 2026, HOT AIR GENERATORS by wood model FABBRI F28 - F55CV - F85CV - F120CV - F240CV NEW machines in prompt delivery NEW PRICE LIST year 2026 WHILE STOCK IS STILL AVAILABLE I CAN GUARANTEE PRICE LIST year 2024 Super discount while stocks last 100% made in ITALY for heating sheds, warehouses, work and private environments Fuels: Wood - Chips - Paper - Cardboard CE marks: Yes volt. 220 single-phase ( model F28 and F55CV ) volt. 380 ( model F85CV - F120CV - F240CV ) CV models are equipped with an additional fan for smoke expulsion at the base of the flue model available : F28 . surface to be heated up to m2 100/150 F55CV . surface to be heated up to m2 300/350 F85CV . surface to be heated up to m2 450/500 F120CV . surface to be heated up to m2 650/700 F240CV . surface to be heated up to m2 1000 Hot Air Generators are suitable for the combustion of wood and all solid fuels allowed by law Horizontal oven made of thermal chrome plated stainless steel, reinforced with ribs. Exchangers 2 or 3 smoke revs. Inner side made of bright sheet metal for casing and insulation. Outer side made of zinc plated sheet metal. Frame made of painted profile. Feeding doors with refractory and extractable grates. Panels with refractory for pipes cleaning. Double suction centrifugal fans for hot air delivery running at low regime of turns and arranged on special elastic suspensions driven by one or more electric motors. Electric command and control panel - adjusting thermostat. Maintenance: Rsdpfx Adjf H Hlrszou Ordinary maintenance means the removal of the deposited ashes by opening the door. Once or twice a year, perform a general cleaning of pipes.

Condition: used, Year of construction: 2009, Weight 10 kg Rsdpfx Aox U A Nqjdzou Year ca. 2009 x

Condition: used, Year of construction: 1989, x-travel 500 mm y-travel 360 mm z-travel 420 mm control Heidenhain 355 tool taper SK 40 weight of the machine ca. 1,7 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. Redpfx Ash Hrvfjdzju +++++

Condition: used, Year of construction: 1997, Control Heidenhain TNC 407 serial number 60/1997 x-travel 1.000 mm Rodpfx Adjumyhrezeu y-travel 600 mm z-travel 700 mm TISCHMAß: 1300 X 600 mm Werkzeugwechsler: 24- fac

Condition: used, Year of construction: 1977, x-travel 700 mm Redpfx Adeqh Ehtezju

Condition: excellent (used), Year of construction: 2022, machine/vehicle number: 1000058013, functionality: fully functional, operating hours: 1,225 h, Equipment: CE marking, documentation/manual, ENGLISH SPOKEN NOUS PARLONS FRANCAIS Manufacturer: BIESSE Model: BREMA EKO 2.2 Year of construction: 2022 Condition: very good Category ID: 2502 Type ID: 4257 Type: vertical wood machining center We offer this very good BIESSE BREMA EKO 2.2 vertical wood machining center, year of construction 2022. The machine was sold new in october 2022 together with a Biesse B-solid software for a total price of €120.000 excl. VAT. The machine only has 1225 working hours, it is sold with all the tools seen on the pictures, which make it a bargain ! Please keep in mind we sell the machine in "used" condition. We sell it as a user, therefore no warranty can be offered on the machine. We'll be happy to load it on a truck and even organize the shipment when required. If you have any questions or need more information, feel free to send us a message or give us a call. Rsdsyu Nulspfx Adzeu Notre entreprise de menuiserie vend cette très belle machine Biesse EKO 2.2 qui a peu servi 1225 heures de travail seulement La machine est très bien équipée et sera vendue avec le logiciel B-suite de Biesse, et tout l'outillage qui est présenté sur les photos. C'est une affaire à ne pas rater ! Prix neuf en octobre 2022 : 120.000€ HT La machine est vendue sans garantie car nous ne sommes pas revendeurs de machines-outils, nous sommes une entreprise de menuiserie. Nous pouvons organiser le transport et charger la machine sur un camion.

Condition: used, Year of construction: 1999, Weight 3 to x-travel 750 mm milling-head swivable +/- ja ja Rjdpfx Adew Sydrszju

Condition: used, Year of construction: 2007, reus 8000 min-1 U/min Weight 5500 kg Year 2007 Control Siemens 840D Dimensions (L/W/H) 3600 x 2800 x 2400 mm travel -x axis 1035 mm travel -y axis 560 mm travel -z axis 510 mm Rodpfx Aowm Rqaedzsu

Condition: used, Year of construction: 1973, Weight 3 t x-travel 1000 mm Redpfxewzyt To Adzeu 110 milling-head swivable +/- ja

Condition: used, Year of construction: 1997, functionality: fully functional, total width: 1,240 mm, total length: 2,630 mm, total height: 1,400 mm, power of feed motor: 1,500 W, overall weight: 1,600 kg, working range: 140 mm, type of input current: three-phase, input voltage: 400 V, - Polish production - year of production 1997 - DTR - CE TECHNICAL DATA: - range of diameters of processed dowels: 40-140mm - max. diameter of input material: 200mm - min. length of input material: 600mm - max. allowance for processing per side: 30mm - cutter head drive motor: 18.5kW - forward/reverse feed - feed motor: 1.5kW - 3 toothed pulling rollers - 4-knife head Rjdpfev N Edbsx Adzsu - 3 smooth pulling output rollers - dimensions L/W/H: 2630x1240x1400mm - weight: 1600kg

Condition: used, Year of construction: 2005, functionality: fully functional, overall weight: 1,600 kg, working range: 140 mm, type of input current: three-phase, input voltage: 400 V, - Polish production - year of production 2005 - DTR, CE TECHNICAL DATA: - range of diameters of processed dowels: 40-140mm - max. diameter of input material: 200mm - min. length of input material: 600mm - max. allowance for processing per side: 30mm - cutter head drive motor: 18.5kW - forward/reverse feed - feed motor: 1.5kW - 3 toothed pulling rollers - head: 4-knife - 3 smooth pulling output rollers Redpfxsv N Ebao Adzeu - dimensions length/width/height: 2630x1240x1400mm - weight: 1600kg