Used Soma for sale (69)

Condition: used, Year of construction: 1998, Year 1998 Control Fanuc In our opinion, the machines are in very good used condition Condition and can be viewed under power by appointment. Accesories: - Suction - Felsomat loading system An accessory package can be purchased additionally. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Tedpfxjxc Nyvs Aacsd Changes and errors in the technical data and information as well Subject to prior sale!

Condition: ready for operation (used), Year of construction: 2010, Large semi-automated Pace cutting system Polar 137 XT-Autotrim with pile lifter, jogging system with count scale, gripper transport system, rotary gripper, and delivery unit Year: 2010 Approx. 5.43 million cuts Tjdpfx Aaoxd U Sajced Workflow: The material to be cut is raised to an optimal working height using a loading lift, placed into the jogger by the operator, automatically jogged, and then transported via the Autotrans gripper system from behind the jogger to the rear table of the high-speed cutter and rotated. After cutting, the Transomat automatically stacks the layers onto a pallet, allowing continuous cutting operations. Polar Stack Lift LW 1200-4 Platform size: 80 x 126 mm Load capacity: 1200 kg Equipped with steplessly adjustable photoelectric sensors for automatic lifting and lowering. Jogger RAH-4 with air removal roller and unloading for rear-table feeding Working format up to 75 x 105 cm Unloading of the jogged cutting material occurs automatically to the rear into the STR stacking rack. The Autotrans gripper transport system then handles layer transport onto the rear table of the high-speed cutter. Sheet scale – Polar count scale Avery Weigh-Tronix For creating quantity-accurate cutting layers Gripper transport system POLAR Autoturn – clamp transporter for rear-table loading and rotary gripper Takes over the prepared cutting layer from the stack rack or buffer table Via air tables, which use air cushion for optimized material handling, the cut material is transported directly onto the rear table of the high-speed cutter and placed with precision. The cutting layer is held firmly by the grippers during transport, ensuring even pre-aligned layers remain precisely squared during movement. Cutting machine Polar 137 XT-AT with touch control And Autotrim function for automatic waste removal under the front table during cutting - Lowerable side gauge left (required for rear-table loading); also allows handling of formats with a diagonal of...

Condition: used, Year of construction: 2005, This Wohlenberg 115 paper cutter, manufactured in 2005, is currently located in Germany and remains in operation within a printshop. With a cutting width of 1150 mm, it???s well-suited for a range of commercial printing needs. The machine comes equipped with digital programs for precision cutting, a basic air table and side air tables to assist in smooth material handling, as well as a Baumann jogger and a Transomat system to enhance workflow efficiency. Price is available upon request. Format: 1150 mm Equipment: Digital programs basic air table Tsdsv Rp Hcjpfx Aacjd side air tables Baumann jogger Transomat

Condition: used, Year of construction: 2007, pressure 20 - 300 kN adjustment of rolling slide 50 mm diameter of rolling spindle 120 mm roll spindle height over machine bed 200 mm Control SIN 840 D taper length of the roll spindle 200 mm rolling spindle turning speeds 0 - 50 1/min torque per rolling spindle 2700 Nm power capacity 2 x 8,4 kW distance between rolling spindles min. 271 / max. 368 mm rolling tool outer diameter max. 300 mm total power requirement 26 kW weight of the machine ca. 7,1 t Tjdpfx Aew E Nmksacjd dimensions of the machine ca. 9,70 x 4,50 x 3,80 m CNC machine for gear cold rolling / thread rolling Felsomat loader cell Complete housing

Year of construction: 2000, condition: ready for operation (used), A Saacke CNC tool grinding machine including a Felsomat tool loader is available. Center height: 170mm, travel X: 580mm, feed X: 20m/min, table dimensions X/Y: 980mm/185mm, travel Z: 250mm, feed Z: 20m/min, travel Y: 250mm, feed Y: 10m/min. B-axis horizontal swivel: 240°, swivel speed: 120°/s, motor spindle diameter: 170mm, speed: 10000rpm, torque: 10.7Nm. Tool positions: 24, tool holder: HSK-C50, A-axis indexing accuracy: +/-15°, error at 100mm diameter: 8µm, workpiece holder: ISO 50, speed: 50rpm. Control: NUMROTOplus V.3.8.3m, resolution X/Y/Z: 0.0001mm, resolution A/B: 0.0001°. Includes Felsomat Robotal RE 01 loading unit with rotary indexing table, FB703 small extinguishing system, and Brinkmann FBS-238/50 screw spindle pump. Documentation available. An on-site inspection is possible. Tedoxdm Ugepfx Aacsd

Condition: used, Year of construction: 2006, Seewer Rondo SCM 50 croissant line with free connectable winder. Use the Croissomat to produce your croissants automatically. Triangles are stamped from a dough sheet, turned, and then curled to perfection. You can use the SCM to produce croissants in addition to other curled products. This compact machine can be accomodated in any bakery. for unfilled croissants Tsdjw Hykiopfx Aacod for laminated and non-laminated doughs up to 900 units per row per hour (maximum 5,400 units) between 2 and 6 production rows digital control puncher press rolls year of build 2006 1 stamping knife is included, extra stamping knives are available for 2250 euro each pictures BEFORE reconditioning

Condition: used, Year of construction: 1998, Year 1998 Control Fanuc In our opinion, the machines are in very good used condition Condition and can be viewed under power by appointment. Accesories: - Suction - Felsomat loading system An accessory package can be purchased additionally. There are 2 identical machines available. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Tjdpjxc Nypofx Aacsd Changes and errors in the technical data and information as well Subject to prior sale!

Condition: excellent (used), We offer here a Beko adsorption air dryer. BEKO activated carbon adsorber CLEARPOINT 2X times DRYPOINT dust filterS075RFWMX Kondensomat Bekomat 20 FM KA20K1ZAR BEKO activated carbon adsorber CLEARPOINT 2X Type: Beko adsorption dryer Condition: used / used Todenyh Tyjpfx Aaced Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: used, Year of construction: 1994, Cutting line Polar 176 EMC - Monitor Year: 1994 Consisting of Pile lift Polar LW2000-W-7S Todpfjiaqv Dsx Aacsd Year: 2000 Description - With steelplate Paper jogger Polar RAB-7S-VA Year: 1994 Description - Air removal roller - Delivery to the left and right Rear loading system Guillotine Polar 176 EMC-Monitor Year: 1994 Description - Monitor - Automatic setting - Side table on the left with air - Side table on the right with air - Air blower - Photocell protection - Number of knives: 2 Unloading system Polar Transomat TR -1EL 185 7S Year: 1994 Description - On the left side of the guillotine

Condition: used, TECHNICAL DETAILS - distance between centers : 200 [mm] - centers height : 100 [mm] - strokes (X/Z) : 130 / 170 [mm] WHEELHEAD - grinding wheels dimensions : 400 x 63 x 127 [mm] - peripheral speed : 45 [m/sec] - power : 3 [kW] - positioned at : 30 [°] WORKPIECEHEAD - type of cone: MT4 - speeds : 600 - 3000 [rpm] - power : 0,5 [kW] - C axis indexing precision : +/- 0,5 [°] TAILSTOCK - type of cone : CM2 - quill stroke : 30 [mm] ELECTRICAL SUPPLY - voltage : 400 [V] - frequency : 50 [Hz] - installed power : 19 [kVA] DIMENSIONS - floor space : 1760 x 2180 [mm] - height : 2630 [mm] - weight : 4.000 [kg] HOURS - under power : 46.943 [h] - working hours : 21.529 [h] EQUIPMENT - CNC FANUC 16TB - soft options : Studer Release B, Pictogramming - interface : RS232C - electronic deported handwheel - direct measuring rules on axes X/Z - tailstock with fine concentricity adjustment - tailstock pinole hydraulic recoil Todpfxouhbxms Aacsd - swiveling dressing wheel upon table : FISCHER AES-72x230/3 - dynamic wheel balancing device : DITTEL HBA 4000 - prepared for diameter sensor : MOVOMATIC ES400 - prepared for parts loading/unloading robot : FELSOMAT - automatic front door - prepared for cooling - electrostatic aspiration : ELOSTA BF2000 - pneumatic collets chuck - 1 wheel-holder - 1 grinding wheel - support arm for zero gravity wheel change - 1 balancing shaft

Condition: used, Year of construction: 1995, functionality: fully functional, We will be selling our finger jointing line at the end of 2025/beginning of 2026, starting from the vacuum destacker (photo 1) up to the finger joint press including the cross-cut saw (photo 11), with only the defect cross-cut saw not for sale. Finger jointing line, model HK 250 L, year 1995 (see photo 7), with upgrades in 2013: control system and finger joint press were replaced. Glue application is performed using the bottom-mixing method with glue rollers (see photo 6). The control system for the entire line and the press was renewed by Somako. Production with this line will continue until the end of 2025, therefore it can be inspected in operation at any time. Tjdpfx Aasw Uf Tkjcjd The price depends on whether the entire line or only parts of it are purchased. Individual components can also be sold as spare parts.

Condition: used, Year of construction: 2001, Seewer Rondo SCM 50 croissant line with free connectable winder. Use the Croissomat to produce your croissants automatically. Triangles are stamped from a dough sheet, turned, and then curled to perfection. You can use the SCM to produce croissants in addition to other curled products. This compact machine can be accomodated in any bakery. for unfilled croissants Todpfxetldxxj Aacsd for laminated and non-laminated doughs up to 900 units per row per hour (maximum 5,400 units) between 2 and 6 production rows digital control puncher press rolls year of build 2001 1 stamping knife is included, extra stamping knives are available for 2250 euro each pictures BEFORE reconditioning

Condition: reconditioned (used), Year of construction: 1995, functionality: fully functional, cutting width (max.): 1,370 mm, BM5150 CUTTING LINE - refurbished: 1) Polar 137EMC-MON AT Guillotine 1995 2) Transomat Downstacker/Palletiser 3) Jogger With Air Removal & possibly Bizerba sheet-count-scale Tedpfxjv Ic H Do Aacod 4) Paper Lift Contact us for further info and for personal price negotiations

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 847/0021, center height: 1,180 mm, spindle speed (max.): 12,000 rpm, workpiece spindle speed (max.): 1,100 rpm, feed length X-axis: 350 mm, feed length Z-axis: 530 mm, Especially suitable for grinding operations, drilling, and flat surfaces for custom parts (e.g., various bevel gears) TECHNICAL DETAILS Center height: 1,180 mm Max. grinding flat surface: Ø 200 mm Max. grinding depth: 70 mm Closable bore: max. Ø 250 mm Max. distance front edge of workpiece spindle – grinding wheel mount: 250 mm Max. workpiece weight + clamping devices: 150 kg X-axis: 350 mm Z1-axis: 530 mm Controller: CNC Sinumerik 840 D Spindle Speeds Main spindle (stepless): up to 12,000 rpm Workpiece Spindle Speeds Workpiece spindle (stepless): up to 1,100 rpm Grinding Spindle Type: 170 EGV 12-20 T Tool mount: Ø 170 mm Screw thread: M36 x 2 Swivel range: 3° fixed position Workpiece Spindle Spindle head: similar to DIN 55026 / Z7 Type: A6 Spindle bore (without chuck): Ø 46 mm Cylinder correction: ± 5 min Axis Drives X1-axis (Siemens 1 FT6 062): 5.0 kW / 3.4 A / 3,000 rpm / IP 65 protection Z1-axis (Siemens 1 FT6 064): 7.9 kW / 5.2 A / 3,000 rpm / IP 65 protection S1-axis workpiece spindle (Siemens 1 FT6 084): 16.2 Nm / 11.3 A / 3,000 rpm / IP 65 protection Feed Rates X1-axis: 9,000 mm/min Z1-axis: 18,000 mm/min MACHINE DETAILS Space requirement: 7,800 x 5,200 x 3,400 mm Machine weight: 5,000 kg Drive Total connected load: 45 kVA Total power demand: 45 kVA Supply voltage: 400 V Frequency: 50 Hz Coolant requirements Coolant quantity (process cooling): 100 l/min Pressure: 2.0 bar Tjdpfswm H H Rox Aacsd Noise Level Sound level: 75 dB(A) EQUIPMENT - Linear portal (Felsomat) - Oval cycle buffer (EWAB) - Hydraulic unit according to DIN - Special chuck (Röhm) - Turbo dressing spindle (EFESIS) - Air cleaner D2000 (IFS)

Condition: ready for operation (used), Year of construction: 1978, CNC vertical lathe Manufacturer: BERTHIEZ Model: TFM 200 Tedpfx Aajw Adpbocod Year: 1978/1995 CNC: NUM 1062T / SOMAB PL+S3 (Teach-in, ISO and Conversational modes) Specifications: Table diameter: 2,000 mm Maximum swing: 2,300 mm Usable height: 2,000 mm Table load capacity: 20 t Table rotation speeds: 1.6 – 200 rpm Table motor power: 55 kW Ram section: 200 x 200 mm Standard table height from floor: 731 mm Vertical traverse stroke: 1,300 mm Traverse movement speed: 400 mm/min Vertical ram travel: 1,600 mm Right carriage travel (from table axis): 1,280 mm Left carriage travel (from table axis): 400 mm Continuous feed rate range: 0.05 – 24 mm/rev CNC programmable feed rate: 0.2 – 360 mm/min Rapid traverse: 6,000 mm/min Equipped with: 12-position tool changer Chip conveyor

Condition: used, functionality: limited functionality, machine/vehicle number: 2194, EWAG WS11 This machine was last used around 10 years ago. Due to long periods of non-use, it now needs to be overhauled. Ideal for refurbishing. With extensive accessories: Tjdevmt Uijpfx Aaced - Basic machine with cooled spindle and dust extraction - Swivel device for microscopes - Machine light - ISOMA microscope for side viewing - ISOMA microscope for front viewing - Radius grinding device with various accessories - Universal vice on collet body (no photo, as it is currently loaned out...) - 19 grinding wheel holders, some with grinding wheels - 29 SCHAUBLIN UP collets Ø 1.0 ... 20.0, some every 0.50 mm - Additional spindle holder for higher mounting of the spindle - Various accessories (dial gauge, additional pulley, etc.) The machine can be inspected at any time in D-78194 Immendingen.

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, 12-color printing machine MHM – TESOMA gas dryer – GADDA stacker – complete line price €55,000. VAT and transport at buyer's expense. Optional: three MHM hoods, three series of pallets. Tjdpfx Aasw S Naveced

Condition: new, functionality: fully functional, New guillotine blades for CNTA3150/10A and CNTA 3150/16A hydraulic guillotine by STROJARNE PIESOK. A completely new set. In addition to the above mentioned, we offer a wide range of blades for guillotines of Czech and Slovak production (Strojarne Piesok): CNTA 2000/6.3A, CNTA 2000/10A, CNTA 3150/6.3A, CNTA 3150/10A, CNTA 3150/16A, CNTA 3150/25A NTE 2000/4, NTE 2000/6.3, NTE 3150/6.3, NTE 3150/10, NTC 1250/2.5, NTC 2000/2.5, NTC 2000/4, NTC 2500/4, NTA 3150 /10A, NTA 3150/16A, NTH 3150/10, NTH 3150/25A. Blades for guillotines of Polish Plasomat and Zamech production: NG3, NG4, NG5, NG8, NG13, NGH6, NGH10. Guillotine blades for guillotine shears H3222, H3222A also available form stock. Other offered spare parts are: bumper nuts, springs, single and double arm brush holders, brush holders’ repair kits, special friction linings for clutch discs, complete clutch discs and sealing sets. Tedsv Rn H Uepfx Aacsd

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 109853 - 280028, workpiece diameter (max.): 38 mm, workpiece length (max.): 500 mm, TECHNICAL DETAILS EX-CELL-O Cold Rolling Machine with Felsomat (1999) Design: Horizontal Area of application: Chipless cold forming of profiles such as splines (straight or helical), spiral gears, oil grooves, CV joints, threads, and knurls Workpiece data Workpiece diameter: 38 mm Workpiece length: 500 mm Profile width: 92 mm Profile outer diameter (standard): 50 mm Profile width (standard): 125 mm Rollable profiles for involute gears: 0.3 - 1.25 m Rolling bar length: 610 mm Travel movements Slide stroke: 760 mm Cycle times Tailstock forward (at approx. 300 mm stroke): 1.0 s Rolling bars forward: 3.0 s Tailstock retraction (at approx. 300 mm) Stroke): 1.5 s Rolling bars return: 3.5 s Loading/unloading (manual): 5.0 s Cycle time: 14.0 s Gear cuts/hour at 100% Ne: 260 MACHINE DETAILS Overall width: 5,014 mm Machine width: 2,360 mm Depth without boom: 2,541 mm Depth with boom: 4,165 mm Height: 2,100 mm Tsdewmb Trspfx Aacjd Machine weight: 10 t Electrical design – Voltage/Frequency: 380/50 V/Hz Total power requirement: 24 kW Drive power: 22 kW EQUIPMENT - Complete enclosure - Tailstock - Hydraulic system - Oil system