Used Sorting for sale (688)

Year of construction: 2026, condition: new, The MVSZ 2000 sorting table is suitable for manually sort and deliver for the next workflow: Technical data - Performance: 3000 kg/h - Electric demands: 0,55 kW, 230 V, 6 A, monophase - Material: WNr. 1.4301, AISI 304 stainless steel - Dimensions: 530x2530x1050 mm - Output height: 1270 mm (+-100mm depends on the tilt angle) - Weight: 110 kg - IP65 certified electronics - Tiltable work surface, adjustable height - adjustable working speed - Useful for our additional bin tippers and washers Klodpsffycxsfx Addol Available options: - Ribbed texture belt: it helps to prevent the fruits from rolling down in case of working on an angled surface.

Condition: ready for operation (used), Year of construction: 2014, A Cimbria optical color sorting machine for bulk materials is available. Nominal throughput capacity: approx. 7t/h, chutes: 7, sorting width: approx. 1200mm, max. number of defect parameters: 16, discharge precision: +/-0.5mm, accuracy: over 99%, inlet height: approx. 2500mm. Machine dimensions X/Y/Z: approx. 3500mm/1800mm/2200mm, weight: approx. 1200kg. Documentation available. On-site viewing is possible. Kodpfsxxl Nlex Addell

Condition: ready for operation (used), Year of construction: 2021, A Meyer color sorting system for the optical separation of small grain sizes in the food industry is available. Chutes: 10, cameras: 20, camera type: RGB 5400 CCD, compressor power: 37kW, compressor delivery rate: 7.1m³/min. Including integrated stainless steel container, refrigerant dryer and screw compressor. The conveying elements were integrated used and may need to be renewed if required. Documentation available. An on-site inspection is possible. Kjdpfsxxa S Ujx Addsll

Condition: as good as new (ex-display), Year of construction: 2015, Knapp roller conveyor accumulating sorter sorting system Fastlane 11200-375-290 RA1954 Brand: Knapp Running direction: both directions Belt spacing: 290 mm Nominal/outer width (NB): 375 mm Length: 11200 mm Frame height: 105 mm /190 mm with sorter Belt width: 35 mm Number of outfeeders: 6 pcs. Number of pneumatic accumulation places: 6 pcs. Belt conveying speed: 36 m/min Accumulation and sorting length: 600 mm. Package dimensions: min. 350 mm width and max. 650 mm length (with current position of the lifters. longer also possible with adjustment) Package properties: flat bottom is recommended or no sagging of the underside Theoretical sorting speed: 2.0 Sec/sorting, 1800 sortings per hour Electrical data: SEW geared motor 0.37 kW, 380V Scope of delivery: without supports, without side guides, with drive station, with light barriers and accumulation mechanism Optionally available: Supports Side guide on one and both sides Change of total length/position Faster motor for higher throughput rates (theoretically 3200 sorts per hour) Programming for sorting process Metal sheets to avoid hanging/sagging Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics Kjdpfjvzuxfox Addsll

Condition: used, Board sorting line Manufacturer: Lekopa Year of production: 1989 16 pockets Kodpfox N S Hbsx Addell Pack press Stacker with spacers Dynagrade

Condition: used, Vibratory bowl feeder / sorting device / bowl feeder / vibratory feeder RNA Vibratory bowl feeder, sorting device / screw feeder with vibratory feeder for screwdriving technology Feeding system, feeding device Manufacturer: RNA Rhein-Nadel Automation GmbH Type SRC-B200-2R Year of manufacture: approx. 2000 Pot diameter top: 300 mm Bowl diameter bottom: 180 mm Kedpsu Ailgsfx Addoll Inner height of bowl: approx. 45 mm Sorting track width: approx. 5 mm Total height (drive + bowl with sorting track): 260 mm Mains connection: 230 Volt, 50 Hz. - Control unit RNA, type ESG 90 for adjustable vibration speed - The conveyor was used to feed automotive fuses Space requirement Ø x H: 300 x 260 mm Weight: 14 kg good condition A bowl feeder always consists of two main components. 1) Sorting bowl, in which the parts are aligned 2) Drive, which generates vibrations in the sorting bowl through mechanical oscillations and thus sets the parts in motion.

Year of construction: 2010, condition: used, Newtec CELOX optical sorting line Machine has been upgraded to the newer type CELOX in 2016 The order is based on the following specifications Ambient temperature ± 5 – 25 ºC. Product Clean, washed carrots Capacity: 8 to 10 tons per hour, depending on the batch (quality and sorting) Product foreign materials The Celox cannot detect foreign materials such as glass, Klsdpfjurhx Njx Addol wood, stones etc. Functionality: Length: +/- 3mm (less than 1% errors) Diameter: +/- 1mm (less than 1% errors) broken: 60-65% is removed (on "normal" broken carrots) there will be 5-6% good carrots among the errors C/S shape: 85-90% is removed. There will be 3-4% good carrots among the errors Volume: +/- 5% -Incl. conversion of complete camera unit to new version -9 Cameras with 8 megapixel resolution (current 2 magapixel) Cameras look at the carrots from above and below at an angle -Better detection of root rot -Better software for deformed products -Better software for quality and dimensions -Incl. set of vibrating channels for the new belts

Year of construction: 2022, operating hours: 3,863 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 006682, On behalf of our customer, we hereby offer a virtually new OI sorting. This installation can be tested in operation at the customer. The machines consist of; Sorting oi: 0050 Bunker belt with dosing drum BDF1200/2000*10000 0060 Ascending belt to screen HBT1200/1600*14000 0070 Cardboard screen 1640*7000 Platform Cage ladder 0080 Adjustments to existing paper chain belt 0090 Switch cabinet included Kjdowq D Dnjpfx Addoll Operating hours only 3863 In consultation with the customer and Bollegraaf, a guarantee is possible under certain conditions See the attached PDF for a precise technical description per machine

Condition: used, Linear feeder / Vibratory feeder / Sorting device Vibratory linear feeder, vibratory hopper, dosing hopper, storage hopper Vibratory bowl feeder, bowl feeder Vibratory bowl, screw feeding system with vibratory feeder for screwdriving technology Feeding system, feed unit Manufacturer: RNA Rhein-Nadel Automation GmbH Year of manufacture: approx. 2000 Useful load: approx. 1.5 kg Oscillation frequency: 100 Hz / 6000 rpm Mains connection: 220 Volt, 50 Hz - Oscillating plate L x W = 170 x 60 x 12 mm - Mounted track length 340 mm - Overall height with base plate and oscillating plate approx. 115 mm Required space L x W x H: 400 x 280 x 400 mm Weight: 9 kg Klsdpfxjxf Urvj Addol Good condition

Condition: used, Vibratory Bowl Feeder / Sorting Device / Spiral Feeder / Vibratory Feeder RNA Vibrating bowl, Sorting device / Screw feeding with vibratory feeder for screw technology Feeding system, Feeding device Manufacturer: RNA Rhein-Nadel Automation GmbH Kodpfx Aoxf Urpsddjll Model: SRC-B200-2L Year of manufacture: approx. 2000 Upper bowl diameter: 250 mm Lower bowl diameter: 190 mm Bowl internal height: approx. 35 mm Sorting track width: approx. 3 mm Total height (drive + bowl with sorting track): 240 mm Power supply: 230 Volt, 50 Hz. - RNA control unit, model ESG 90, for adjustable vibration speed - The feeder was used for supplying automotive blade fuses Required space Ø x H: 250 x 240 mm Weight: 13.5 kg Good condition A vibratory bowl feeder always consists of two essential components: 1) Sorting bowl, where the parts are oriented 2) Drive unit, which generates vibrations via mechanical oscillations in the sorting bowl and thus sets the parts in motion.

Condition: used, Vibratory Feeder with Pneumatic Screwdriver Stand Eco Line Vibratory Feeder, Sorting Device, Bowl Feeder, Vibratory Bowl, Automatic Screwdriver WEBER Type ZSU 24 Machine No.: 1113212 Year of Manufacture: 2003 Vibratory Feeder WEBER ZSU 24 Bowl diameter: 240 mm Bowl internal height: 70 mm Sorting track width: 10 mm Power supply: 230 Volt, 50 Hz Operating pressure: 6 bar (for singulation and screws) Control voltage for pneumatic valves: 24 Volt - Controller for infinitely variable vibration speed = infinitely variable transport speed - Vibratory bowl in protective enclosure - With pneumatic feeding system - Feed impulse via external electrical control - The feeder was used for feeding screws M5 x 12 mm - Some pneumatic hoses need to be replaced - Siemens S7-200 CPU 224 PLC MISSING Space requirements vibratory bowl L x W x H: 450 x 450 x 315 mm Vibratory bowl weight: 32 kg WEVER Eco Line Screwdriver Stand Guide column: Ø 60 x 525 mm Height adjustment: 345 mm Primary stroke pneumatic cylinder 1 FESTO DZF-32-125-P-A-SM: 115 mm Screwdriver holder diameter: Ø 50 mm Secondary stroke pneumatic cylinder 2 FESTO: 30 mm Screwdriver guide diameter: Ø 37 mm Distance screwdriver guide to table: 135 - 465 mm - 1 piece flat cylinder FESTO, Type DZF-32-125-P-A-SM - 1 piece flat cylinder FESTO, Type probably DZF-32-30-P-A-SM - Screwdriver linear motion frame on linear guide - 3 position sensors on the cylinders - Festo pressure switch - Bosch pneumatic valve Screwdriver stand dimensions W x D x H: 200 x 410 x 1050 mm Screwdriver stand weight: 35 kg good condition Total weight vibratory feeder and screwdriver stand: 67 kg Attention: The original Siemens S7-200 CPU 224 PLC is missing (see picture control cabinet without PLC), therefore, an automatic process is not possible in this condition. The control system also managed the separations of the screws and controlled the screwdriver itself. The vibratory bowl is fully functional even without the PLC, the built-in vibratory bowl controller does not require PLC control. Process: Fasteners are filled into the bowl in bulk and conveyed upward by mechanical vibration (micro-throw principle). The vibratory bowl is automatically switched on or off depending on the fill level of the screw magazine. Ksdpfx Asxf Up Usddoll The screw is then conveyed by compressed air through a plastic hose to the downstream device. The feed impulse for each individual screw is triggered externally by the downstream device.

Year of construction: 2019, operating hours: 1,200 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 6223, Kiverco Ps122 picking station for sale Machine has the following options - Overband Magnet - Wind shifter (option) Ksdpfev Ew N Uox Addoll - Emergency stop Pull Cord in picking cabin - Auto-Grease Dispensers Fitted to Each Bearing - Heated cabin - Hydraulic system for set up - Generator (optional) - Unbraked wheeled site axle

Condition: new, Year of construction: 2020, Pallet Sorting Do you wish: - To sort more pallets with a minimum on labour? - To save time and money? Then choose for the automated pallet-sorting-solutions from CekamonSaws. We develop the sorting line you need in your company, against reasonable costs per pallet spot. Important to know: The capacity we stand for is the capacity that can be achieved!!! Are you looking for a solution to sort all your different kind of pallets? Our MPSL (Multi Pallets Sorting Line) is unique at the market. With this system you efficiently sort up to 30 different kind of pallets Advantages of a Cekamon Pallet-Sorting-Line - You sort more with less effort - Your employees face a reduction of physical strain - Your employees are no longer lifting massive Kilos and walk around with it - You prevent employees from illness due to backpain injuries - The sorting process of pallets will go faster In other words: many, many advantages for your company The Cekamon Method What solution do you need? What sorting line do you really need? That’s something we would like to discuss with you. We very much would like to hear about your company, it’s processes and your specific demands and wishes. And for sure, we would like to see the space where you have planned your sorting line. Then we visualize the idea in a 3D drawing. At this stage you will be able to view the design from all sides. Due to this visualisation you will have a realistic impression of the suggested solution. Kjdpefkh S Eefx Addoll Limited space? Even than we are nearly always able to find a suitable solution. Our sorting solutions are tailor made for sorting 200-400 pallet per hour. It doesn't matter whether it is a mono flow (one sort of pallets) or you are sorting mixed pallets

Condition: new, Year of construction: 2022, Field of application: Construction CE mark: yes Kodpfxsgfu Nme Addjll Production country: NL Please contact Kristoff Van Havere for more information

Condition: excellent (used), color: other, Year of construction: 2022, Year of manufacture: 2022 Empty weight: 1.100 kg Dimensions (LxW): 190 x 80 cm Attachment suited for: Excavators Quick coupler system: Yes Technical condition: very good Visual appearance: very good Condition Klsdpfxjwlzcke Addol CE type: CE

Condition: used, One simple combi sorting line with 10 band pockets and a capacity of up to 40 pieces per minute. Ksdpfx Ajxyaivoddell

Condition: used, Vibratory Bowl Feeder / Sorting Unit / Spiral Feeder / Vibratory Conveyor RNA Vibratory bowl, sorting device / screw feeding unit with vibratory feeder for screwdriving applications Feeding system, feeding device Manufacturer: RNA Rhein-Nadel Automation GmbH Model: SRC-N 250-2L Serial No.: Year of manufacture: approx. 2000 Bowl diameter (bottom): 300 mm Bowl diameter (top): 350 mm Bowl internal height: approx. 25 mm Sorting track width: approx. 30 mm Total height (drive + bowl with sorting track): 380 mm Oscillation frequency: 100 Hz / 6000 rpm Power supply: 230 V, 50 Hz - RNA control unit, type ESG 90, for adjustable vibration speed - The feeder was used for feeding automotive blade fuses Space requirement Ø x H: 420 x 390 mm Weight: 52 kg In good condition A bowl feeder always consists of two main components. Klsdpfx Aeux Shveddel 1) Sorting bowl, which aligns the parts 2) Drive unit, which generates vibrations in the bowl via mechanical oscillation and thereby moves the parts.

Condition: used, Vibratory bowl feeder / Sorting device / Bowl feeder / Vibratory feeder RNA Vibration bowl, sorting device / Screw feeding with vibratory feeder for screw technology Feeding system, feeding device Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SRC-N 250-2L Serial No.: Year of manufacture: approx. 2000 Bowl diameter bottom: 250 mm Bowl diameter top: 380 mm Bowl internal height: approx. 70 mm Sorting track width: 30 mm Total height (drive + bowl with sorting track): 390 mm Vibration frequency: 100 Hz / 6000 rpm Mains connection: 230 Volt, 50 Hz - RNA control unit, type ESG 90 for adjustable vibration speed - Vibration bowl with rubber lining - The feeder was used for feeding automotive blade fuses Space requirement Ø x H: 420 x 390 mm Weight: 50 kg Kledpfx Asuqraheddel Good condition A bowl feeder always consists of two essential components: 1) Sorting bowl, where the parts are oriented 2) Drive unit, which generates mechanical vibrations in the sorting bowl to move the parts.

Condition: ready for operation (used), Archive photo Machine is currently being refurbished, delivery time 3 months Sorting machine for sorting out all non-ferrous and ferrous metals The machine can sort out ferrous metals separately, ferrous iron does not have to be separated out beforehand. Test sorting in the Habdaufkege process possible. The machine will be demonstrated in working order. The sale is without guarantee and warranty, commissioning possible worldwide for an additional charge. Klsdjiqk Aqepfx Addel

Condition: not inspected (used), ISS 100 with vibrating chute and control cabinet more photos to follow the sorting machine will be handed over in working order sorting tests in manual feeding method can be carried out Kledpfx Aov Duv Njddsl

Year of construction: 2009, condition: excellent (used), Several pieces of Knapp conveyor belt and application belt are for sale in several sizes It can be used in a Z shape (as an application tape) and straight. Manufacturer: Knapp Belt length: 4870 mm (470 + 3700 + 700 mm) Travel speed: 30 meters/minute Height adjustable Kjdpfx Ael Dw U Sjddjll Belt width: 280 mm Channel width: 320 mm Total width: 380 mm Tape material: rubber fabric, minimally ribbed in the longitudinal direction. Frame: powder-coated steel Drive: Geared electric motor Sew-Eurodrive Electric power: 0.37kw, 50Hz, 400V The indicated price applies to one piece.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, type of input current: AC, vibrating bowl feeder Vibrating feeder RNA SRC-N 550mm diam vibrating feeder with controller Manufacturer/Typ: RNA SRC-N 250-2R Top bowl diameter: 550 mm Bowl diameter bottom: 250 mm voltage: 230 volts 50Hz protection: ip 44 vibration frequency at 100Hz: 6000 /min vibration controller Bowl diameter bottom: 250 mm Bowl diameter top: 380 mm Inner bowl height: approx. 70 mm overall dimensions: height: 700mm width:600mm weight:80g in good condition! If you need more information. We are here to help! Please contact us using the contact form or give us a call Kodpfxowav R Se Addell Your ad has been automatically translated. Translation errors are possible.

Year of construction: 2009, condition: excellent (used), Several pieces of Knapp conveyor belt and application belt are for sale in several sizes It can be used in a Z shape (as an application tape) and straight. Manufacturer: Knapp Belt length: 6200 mm (690 + 5280 + 230) Travel speed: 30 meters/minute Height adjustable Belt width: 280 mm Channel width: 320 mm Total width: 380 mm Tape material: rubber fabric, minimally ribbed in the longitudinal direction. Frame: powder-coated steel Drive: Geared electric motor Sew-Eurodrive Electric power: 0.37kw, 50Hz, 400V Kodpfx Ael Dxawoddell The indicated price applies to one piece.

Year of construction: 2011, condition: excellent (used), Several pieces of Knapp conveyor belt and application belt are for sale in several sizes It can be used in a Z shape (as an application tape) and straight. Manufacturer: Knapp Belt length: 3950 mm (1050 + 2300 + 600 mm) Kedpfjl Dw Uvex Addoll Travel speed: 30 meters/minute Height adjustable Belt width: 280 mm Channel width: 320 mm Total width: 380 mm Tape material: rubber fabric, minimally ribbed in the longitudinal direction. Frame: powder-coated steel Drive: Geared electric motor Sew-Eurodrive Electric power: 0.37kw, 50Hz, 400V The indicated price applies to one piece.

Year of construction: 2007, condition: good (used), Oriented feeders GASSNER Dynasort DH 600 + Kedpfx Adedwhr Djdell Gassner Dynasort designed max: 36.000./h Working width 600 mm geared electric motor 3-4kw, 400v 50 Hz Height: 4800 mm approx If you need more information. We are here to help! Please contact us via the contact form or call us Your ad has been automatically translated. Translation errors are possible.