Used Textile Machinery for sale (76,900)

Condition: new, bore capacity in steel (diameter) 28 mm throat 250 mm bore stroke 130 mm morse taper 3 MK table: 380 x 380 mm turning speeds 75 - 3000 U/min engine output 1,1 kW column diameter 98 mm thread M16 ST60 dimensions 700 x 450 x 1500 mm weight 200 kg - Height adjustable and angle adjustable table - Movable work table Gtsdpfxekahu Uo Afwst - Prepared for cooling system - Powerful engine - 3 hand levers for drilling feed - Safety shield with limit switch - Separate emergency stop - Built-in working lights - Incl. drill chuck 16mm - B16 - Built-in automatic thread cutting.

Condition: new, Year of construction: 2026, pressing force: 25 t, Equipment: double-sided, The Marinus Powermax Finger Jointer Line profiles horizontally, applies adhesive, cuts out defects, presses and cuts to length. The unique process creates a clean joint that does not require post-processing. About the Finger Jointer When feeding wood into the machine, it is possible to mark defects, such as knots or cracks, with a luminescent crayon. The machine will cut out these defects, including the crayon lines. For instance, to get cladding or paneling without knots or holes. Before the profiling and also before the pressing, the wood is brought to a stationary position, fixed sideways and clamped to an accurate reference surface above. This results in a highly accurate connection of the finger joint, with a flat surface at the joint and a straight end-product. Because of this precision (for most purposes) the wood does not need to be planed or sanded afterwards. The adhesive applicator is mounted to the carriage with the profile cutters. In the returning stroke of the profiling carriage the adhesive is applied. The use of PU adhesive ensures a very strong bond, suitable for outdoor use and in wet environments. While most other finger jointers move the wood transversely (right-angled) past the profiling heads, the Marinus Finger Jointer moves the wood longitudinally (lengthwise) through the machine. This enables feeding in long lengths of 6 meters or even longer. As a result, the machine can process all the wood, including longer lengths, and use it all (except for the defects) for the jointed end-product. This way, there is no good wood turned into short pieces of scrap. Where other finger jointers focus on re-using short pieces of scrap wood, the Marinus eliminates the production of scrap wood. The Marinus Finger Jointer contributes to an efficient and sustainable production process. Specifications: Infeed Lenghts: 450 - 6000+ mm Infeed Widths: 50 - 300 mm Infeed Thicknesses: 8 - 50 mm Length modes: Variable / Fixed Capacity: Up to 8 joints/min This machinery is engineered and built in our company in The Netherlands and will be delivered new from our factory. This machinery is equipped with an online remote support system. We provide customer support worldwide. Gtodpfx Afjp R Iwhswot This listing on Machineseeker is also made by us: Marinus Machinery.

Condition: excellent (used), REF: MM5767 1 x Adpak Machinery Systems Ltd stainless steel flow wrapper fitted with an ICE Zodiac Hawk thermal transfer printer and a fixed folding box. Gjdpfx Aoulc Sqefwjtt Model - GSP 65. Date of manufacture - 2009 approx, refurbished by Midas Motion in 2020. Sealing jaws - 300mm long. Fixed folding box - 40mm wide. Came out of production in 2023, this unit was previously used to individually wrap ice lollies.

Condition: as good as new (ex-display), Year of construction: 2023, CNC - turning center YCM NTC2000LSY control : Fanuc TXP100FBTXP100FB+ main spindle : A2-6 / 5.000 rpm, hole through spindle: Ø80mm, hole through draw bar: Ø66mm sub spindle : A2-5 / 6.000 rpm, hole through spindle: Ø55mm, hole through draw bar: Ø45mm Turret Capacity: 12 Max. Turning Diameter : Ø310 mm Max. Turning Length : 570 mm X travel: 160mm Z travel: 570mm Y travel: 90mm (-50 / +40mm) Gtsdpfett Dhvsx Afwet LSY (Y axis, BMT55 turret 12T High performance coolant pump 8 bar coolant gun interface for bar feeder automatic Renishaw HPMA tool length measuring system main spindle Parts collection system Counter spindle

Condition: used, Year of construction: 2007, Manufacturer: Gökkaya Machinery Model: AKO®WALL EX KDH 10W Year : 2007 Type: Wall-mounted dissolver   ATEX classification: Ex 1/2GD cEx dem IIAT3 Weight: 500 Kg Diameter of mixing rotor: Ø 200 mm Shaft length : 985 mm Up/down stroke: 1150 mm Raise/lower: hydraulic Sew Eurodrive unit: 1.5 Kw Loher motor: 7.5 KW Gjdpfx Asx R Ayzsfwett  

Year of construction: 2007, operating hours: 2,000 h, condition: used, functionality: fully functional, cylinder diameter: 200 mm, pressure (max.): 6,000 bar, machine/vehicle number: 600/55, High-Pressure Food Processing Machine (HPP System) – Wave 6000/55 This high-pressure food pasteurization system (HPP) is a unit designed for batch processing of packaged food using hydrostatic pressure. The machine is fully operational, well maintained, and suitable for research, product development, and low-to-medium volume industrial production. High-pressure processing (HPP) offers significant advantages for food manufacturers seeking to improve product safety, quality, and shelf life without the use of heat or preservatives. By applying up to 600 MPa of hydrostatic pressure to already packaged products, HPP inactivates harmful pathogens such as Listeria monocytogenes, Salmonella, and E. coli while preserving the natural taste, texture, nutrients, and color of the food. This makes HPP an attractive technology for clean-label formulations. In addition, the process typically doubles or even triples the shelf life of many refrigerated foods, reducing waste and improving distribution flexibility. Because HPP is a post-packaging treatment, recontamination risks are minimized, enabling manufacturers to meet stringent food safety standards in domestic and export markets. The technology is suitable for a wide range of products, including meat, seafood, juices, plant-based foods, ready-to-eat meals, and high-value chilled items. The system offers a treatment chamber volume of 55 L, reaching pressures up to 6,000 bar (600 MPa), with automatic basket loading/unloading and an integrated intensifier. It is ideal for enhancing food safety, extending shelf life, and enabling clean-label product concepts. Gsdpfx Afex E Utijwjtt Technical Details Model: Wave 6000/55 Chamber layout: Horizontal Chamber dimensions: Ø 200 mm × 2,000 mm Chamber volume: 55 L Total equipment length: 8,020 mm Maximum working pressure: 6,000 bar (600 MPa) Pressure medium: Water, free of additives Processing water temperature: +5 °C to +30 °C Pressure-build time (0–6,000 bar): 3.9 min Intensifiers: 1 integrated Electrical power: 47 kW (50 Hz) Loading/unloading system: Automatic Total weight: ~20,000 kg Condition and Use Cases The machine is in very good condition and suitable for: Meat, seafood, ready-to-eat meals Dairy, beverages, plant-based products Shelf-life extension and pathogen reduction R&D, validation trials, pilot production Cycles completed (as of Jan 2025): 20,000 Included with the High Pressure Food Processor WAVE 6000/55: High-pressure vessel made of stainless steel, wire-wound with high-resistance cable; horizontal layout with 55 L useful volume Yoke constructed from high-quality steel layers, double-primed and painted Stainless steel vessel plugs Support beds Hydraulic power unit with vessel opening/closing mechanisms Integrated intensifier (1 unit) High-pressure stainless steel piping for intensifier–vessel connection Water filtration system (5 µm) Temperature probe for monitoring processing water via the client fluid circuit Tactile touch screen for automatic and manual operation (interface in German) Electrical control cabinet SCADA system for control and data recording Internet communication module for remote service Instruction manual The machine has been used for reasearch purposes and has only done ~20.000 cycles. It is assumed the average cycle length is 6minutes = 2,000 hours All technical specifications and details are provided without guarantee. Subject to prior sale and possible errors or omissions.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser source manufacturer: BOCHI, laser power: 6,000 W, sheet thickness (max.): 15 mm, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, FREE> Installation, commissioning, and training service FREE> Lifetime 24/7 online after-sales engineering support Blazing Fast & Razor Sharp: CNC Fiber Lasers Cut steel, stainless steel, and aluminum with unparalleled speed and precision – so clean that no post-processing is required. With Danmar Machines' CNC Fiber Laser cutting machines, elevate your metalworking to the next level! 🔥 Lightning-fast production speed 🔥 Extremely low energy and maintenance costs 🔥 Perfect cuts and engravings down to the smallest detail 🔥 Power up to 6kW and flexible working areas More output, lower costs, higher quality. Best of all? Financial leasing available on exceptionally favorable terms! Ready to leave your competition behind? Request a quote now. Specifications: Power support: 3kW–12kW Working area: 1530×3050mm Type: Single enclosed working table Table pull method: Fully automatic; entire working table can be extended Table loading capacity: 900kg Max acceleration: 1.0G Maximum linkage speed: 120m/min Machine dimensions: 4649×2260×1950mm 4649×4000mm (with table extended) Machine weight: 3600kg Machine type: Single Enclosed Working Table Laser generator: MAX Cutting system + cutting head: Model-dependent Bochu FSCUT2000E + Boci BLT310 (1.5–4kW); Bochu FSCUT4000E + Boci BLT421S (6kW); Bochu FSCUT6000 + BLT442 (12kW); Servo motor: Veichi Bus High-Speed Reducer: High-quality Chinese manufacture Water chiller: S&A / Hanli Zoned dust extraction as standard Exhaust fan included as standard Power supply: 3-phase, 380V, 50Hz FiberLasers: Fairly priced for professionals who can manage their own setup. Pay for steel, not service. Our CNC machines are for the resourceful, self-sufficient business owner. Focus on functionality: Your machine, your management, our lowest price. Opt for self-installation and save tens of thousands of euros on your new CNC machine. Experience the power of CNC automation without the overhead costs. For technically skilled professionals. 24-Month Warranty: Gtodpfx Afsx Srnkewet · Parts delivery: If a malfunction occurs within 12 months, parts are provided free of charge after diagnosis (photo/video required). · Labor not included: Replacement of parts to be performed by you or outsourced at your discretion. · Designed for low maintenance · Digital setup: Direct online service via app or TeamViewer, often eliminating the need for technician visits—saving time and costs · Online service: 24/7 Digital Support as an Alternative · Video guides: clips for calibrating or replacing components · Exploded view diagrams: Instantly identify the exact replacement part Focus on functionality: Your machine, your management, our lowest price. You pay only: machine, travel costs, hotel, and meals! The Best Solution 2026

Condition: new, Year of construction: 2026, functionality: fully functional, working width: 200 mm, The Marinus Powermax Chevron is an advanced machine line for head-end machining tongue and groove on Hungarian-point (Chevron) and herringbone parquet. Several wooden parquet boards can be loaded into the infeed cassette, after which the process runs automatically. First the boards are pre-cut to the corresponding length and angle in the cross cut saw unit, then they go via conveyor to the Chevron machine. Before the profiling takes place the wood is brought to a stationary position, fixed sideways and clamped to an accurate reference surface above. Resulting in high profile accuracy with no noticeable edge on the top side when the boards are fitted together. The two arms on which the profiling heads slide back and forth are sturdy built and driven by servo motors, which guarantees that all the boards have exactly the same length and angle. The lengths and angles are stepless adjustable via the user friendly touch screen panel. This clamping system combined with two pre-cut aluminium backing blocks effectively prevents blow-outs and splintering. Lengths: 350 - 1200 mm Widths: 50 - 200 mm Thicknesses: 8 - 22 mm Gtsdpfx Afsiv R Hhewot Angle: -45° to +45° Capacity: Up to 10 boards per minute Length modes: Fixed lengths This machine is engineered and built in our company in The Netherlands and will be delivered new from our factory. This machine is equipped with an online remote support system. We provide customer support worldwide. This listing on Machineseeker is also made by us: Marinus Machinery.

Year of construction: 2007, condition: excellent (used), 1 x Record Packaging Machinery flow wrapper with Domino V230i thermal transfer overprinter and infeed conveyor. Fitted with an adjustable folding box, this unit is suitable for wrapping a variety of products in printed or clear film. Model - Scorpion MD SP. Date of manufacture - 2007. Speed - between 20 to 120 packs/minute (depending on product size). Sealing jaws - 350mm long. Infeed conveyor - 185mm wide. Gsdpfsukw Nbsx Afwett Outfeed conveyor - 220mm wide. Previous use - for packing cereal bars and biscuits. Overall dimensions - 4670mm L x 1350mm W.

Condition: used, Year of construction: 2018, machine/vehicle number: IntNr231432, CNC short turning machine – Citizen Miyano BNE-51MSY Year of manufacture: 2018 Condition: Very good, fully operational Availability: At short notice Brief description For sale is a Citizen Miyano BNE-51MSY CNC short turning lathe in MSY configuration featuring main and counter spindles, as well as a Y-axis. This machine is ideal for precise and cost-effective complete machining of complex turned and milled parts in series production. Equipment / Highlights - Fixed headstock (short turning) - Main spindle + counter spindle - Y-axis - 2 tool turrets, each with 12 stations - Driven tools - Simultaneous machining capability - High rigidity and process reliability Technical data - Max. bar capacity: Ø 51 mm - Max. turning diameter: approx. 165 mm - Max. turning length: approx. 380 mm - Main spindle speed: up to approx. 5,000 rpm - Counter spindle speed: up to approx. 5,000 rpm - Control: Mitsubishi MELDAS Gjdpfsx Tg Sgox Afwstt - Machine weight: approx. 8,000 kg The machine is fully functional, both electrically and mechanically. Complete technical documentation available. The machine can be inspected under power by prior appointment. Subject to technical changes, errors, and prior sale!

Condition: excellent (used), Prism Pharma Maxhinery ribbon blender. Vacuum option. Lovely condition. Direct from test facility. Gtedpfox Axbcsx Afwjt

Year of construction: 2023, condition: new, functionality: fully functional, This machine, type KM13, cuts electrical cables from 20 to 120 mm in diameter. The different diameters are easily adjusted by turning the hand wheel up and down. The machine has a speed of 25 mtr/min. The dimensions are: length 600 mm, width 600 mm and height 1600 mm. The weight of this machine is about 200 kg. This machine is powered by a 380V-50HZ, 3KW electric motor with a gearbox cabinet. The cable is cut from 2 sides so the copper core falls out easily. Spare parts such as blades, drive, bearings etc can also be supplied. If required we can also perform maintenance on these machines A machine that is ready to use and easy to operate. If you want to try it, please bring cable. Gtodpfx Ajq E Ti Hofwet

Condition: new, Year of construction: 2026, functionality: fully functional, travel distance X-axis: 2,600 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 200 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 15 m/min, workpiece height (max.): 350 mm, total length: 3,500 mm, total width: 2,100 mm, rotational speed (min.): 1,000 rpm, rotational speed (max.): 24,000 rpm, overall weight: 2,460 kg, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, CNC Nesting Machine The EXPRESS-ROUTER CNC milling machine is the new customized machining center for those who demand precision and reliability. Designed and assembled in the Netherlands according to the strictest European standards. This machine is built for small and medium-sized businesses. With a robust welded steel chassis, servo drive, automatic tool changer, and smart software integration, this is the ideal solution for everything from cabinet making to complex 3D relief machining. Why DMA MACHINERY - Price & Quality - Minimal floor space required - Complies with the latest European Machinery Regulation (EU)2023/1230 - CNC Gantry Router - Suitable for processing: wood, plastic, aluminum, acrylic, foam, plastic, …etc - Unlimited possibilities Gtsdpfx Afex R D Rnjwjt - No licenses required - CadCam software Pegasuds (see videos) - 1 year online helpdesk support CNC Machines: Fairly priced, for the skilled professional who can do it themselves. Pay for steel, not for service. Our CNCs for the smart, self-reliant entrepreneur. Focus on functionality: Your machine, your control, our lowest price. Choose to do it yourself and save tens of thousands of euros on your new CNC machine. The power of CNC without overhead costs. For professionals with technical knowledge.

Condition: new, Year of construction: 2026, The Marinus Powermax Endmatcher is designed for head-end machining tongue and groove on parquet floorboards, decking and cladding, producing fixed and variable lengths. It can be used for any type of wood; hardwood, softwood, or engineered wood. The machine can cut to length, cut out defects, and do head-end profiling, all in a single pass of the wood through the machine. When feeding wood into the machine, it is possible to mark defects, like knots or cracks, with a luminescent crayon. The machine will cut out these defects, including the crayon lines. Lengths: 450 - 6000+ mm Widths: 50 - 300 mm (optional width of 400mm or 500mm) Thicknesses: 8 - 45 mm Capacity: up to 20 pc/min Length modes: Variable / Fixed / Round. Gtjdpsf Hkgpsfx Afwjt This machine is engineered and built in our company in The Netherlands and will be delivered new from our factory. This machine is equipped with an online remote support system. We provide customer support worldwide. This listing on Machineseeker is also made by us: Marinus Machinery.

Condition: used, DM-01225-PET-Blowing Gtsdpfx Afox I Rclowjt Semi-automatic PET bottle blowing machine Capacity: 1,000 BPH 2 units of blowing machines 1 preform heating tunnel Equipped with 2 x 0.5 L bottle mold Capacity: 1,000 pcs/hour, Cavities: 2 x 2 for 500 ml bottles Air pressure compressor Air dryer Donalcon air filters

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: KB-20211022002, 1 x Hangzhou Kuangbo Machinery Equipment Co. Ltd 2000L beer tank, previously used as a brite tank but can be used as an FV. Technical Specification: Model - KBBFT1300A. Serial number - KB-20211022002 Date of manufacture - 2021. Capacity - 2000 litres. Notes: All 1.5inch Tri Clamp connections other than DIN PRV port on top, manway door, and larger triclamp Features: Port on top for dry hopping etc. 2x thermowells, one for a thermometer at front and one for temp sensor in back & a CIP arm on the RHS, with sprayball. Gtjdpewl H Niefx Afwet

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, controller manufacturer: Mitsubishi, Equipment: chip conveyor, documentation/manual, CNC-Drehmaschine Chuan Chay CT2-52YM mit Top Automazioni Stangenlader Baujahr: 2014 | Top gepflegt | Standort: Baden-Württemberg _____ Zum Verkauf steht eine sehr gepflegte und voll einsatzbereite CNC-Drehmaschine des Typs Chuan Chay CT2-52YM, ausgestattet mit einem automatischen Stangenlader von Top Automazioni. Die Maschine stammt aus einem Konzernbetrieb, in dem sie regelmäßig gewartet und sorgfältig gepflegt wurde. Sie befindet sich in technisch wie optisch sehr gutem Zustand und ist sofort verfügbar. _____ Technische Daten • Hersteller: Chuan Chay • Modell: CT2-52YM Gjdpfx Afswg Dabjwett • Baujahr: 2014 • Steuerung: Mitsubishi • Max. Stangendurchlass: Ø 52 mm • Achsen: C-Achse & Y-Achse • Gegenspindel • Angetriebene Werkzeuge • Späneförderer & Teilefänger • Stangenlader: Top Automazioni • Standort: Baden-Württemberg _____ Zubehör • 16 Werkzeughalter für Außenbearbeitung • 12 angetriebene Werkzeuge • 10 Werkzeughalter für Innenbearbeitung • ca. 30 Spannzangen • 2 Spannzangenköpfe • 8 Greifer-Armbacken in verschiedenen Größen _____ Highlights • Sehr gepflegter Zustand • Laufend gewartet (bisher im Konzernbetrieb im Einsatz) • Sofort einsatzbereit • Optimal für Klein- und Mittelserien • Attraktive Komplettausstattung _____ Besichtigung nach Absprache möglich. Die Maschine ist ab sofort verfügbar. Transportorganisation und Verladung können auf Wunsch unterstützt werden. Bei Fragen oder Interesse freuen wir uns auf Ihre Kontaktaufnahme. _____ CNC Turning Machine Chuan Chay CT2-52YM with Top Automazioni Bar Feeder Year of Manufacture: 2014 | Excellent Condition | Location: Baden-Württemberg, Germany _____ We are offering for sale a well-maintained and fully operational CNC turning machine of the type Chuan Chay CT2-52YM, equipped with a Top Automazioni automatic bar feeder. The machine was previously operated in a corporate environment, where it was regularly serviced and carefully maintained. It is in very good technical and visual condition and is immediately available. _____ Technical Data • Manufacturer: Chuan Chay • Model: CT2-52YM • Year: 2014 • Control System: Mitsubishi • Max. Bar Capacity: Ø 52 mm • C-axis and Y-axis • Sub-spindle • Driven tools • Chip conveyor & parts catcher • Automatic bar feeder by Top Automazioni • Location: Baden-Württemberg, Germany _____ Included Accessories • 20 external turning tool holders • 12 driven tools • 10 internal turning tool holders • approx. 30 collets • 2 collet heads • 8 gripper arms in various sizes _____ Highlights • Excellent overall condition • Regularly serviced (previously operated in a corporate environment) • Ready for immediate use • Ideal for small and medium series production • Well-equipped with useful accessories _____ The machine is immediately available. Viewing can be arranged by appointment. Support with loading and transport logistics is available on request. We look forward to your inquiry and will be happy to provide further information.

Condition: like new (used), Stainless horizontal fish slicer with adjustable thickness, adjustable stroke and speed. Gtjdpfx Ajdz Tcbofwjt

Condition: new, Year of construction: 2026, functionality: fully functional, travel distance X-axis: 2,600 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 200 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 20 m/min, controller manufacturer: syntec, workpiece length (max.): 6,000 mm, workpiece width (max.): 2,100 mm, workpiece height (max.): 350 mm, total height: 2,200 mm, total length: 4,200 mm, total width: 2,100 mm, table load: 1,500 kg, rotational speed (min.): 1,000 rpm, rotational speed (max.): 24,000 rpm, overall weight: 2,800 kg, spindle mount: MK 3, number of slots in tool magazine: 10, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, Cost savings for the end customer: €80,000 instead of €40,000 DMA delivers high-quality CNC machines at unbeatable prices by eliminating expensive service contracts and installation visits. Ideal for professionals who want to maintain full control. Included in the purchase price: - CNC controller "SYNTEC" - CNC nesting/milling CAD/CAM - PEGASUS Professional CAD/CAM including online training/helpdesk - Starter kit with cutting and drilling tools for CNC sheet metal processing • Spare parts supply: In the event of a defect within 12 months, after diagnosis (photo/video), spare parts will be supplied free of charge. • Labor costs not included: You can replace the part yourself or commission an external service provider. • Low-maintenance designs. Gedpfx Ajx Rz Auofwott • Digital commissioning: Via app or TeamViewer, direct online service. This means technician visits can be avoided, saving both time and costs. • 24/7 online support. Digital support as an alternative • Video tutorials: Clips for calibration or parts replacement. • Exploded diagrams: Components immediately identifiable. Functionality in focus: Your machine, your management, our best price. Usable working area: 3,200 x 1,600 mm (standard sizes available). Z-axis: 200 mm. Automatic tool changer with 9 kW router spindle. Up to 26 spindle positions. Row drilling unit optional. Grooving unit optional. CadCam nesting software. Pressure rollers (for uneven materials) optional. Becker VTLF2.250 vacuum pump. All axes servo-driven. Heavy-duty CNC milling machine Type "NESTING" Working area: 1,300 x 2,600 mm (standard sizes available) Z-axis: 200 mm ATC 9 kW router spindle Drilling unit optional Grooving unit optional CadCam nesting software Pressure rollers (for uneven materials) optional Becker VTLF2.250 vacuum pump All axes servo-driven

Condition: excellent (used), Year of construction: 2012, operating hours: 3,500 h, functionality: fully functional, machine/vehicle number: 1311151215, turning diameter over cross slide: 870 mm, turning length: 2,000 mm, turning diameter: 400 mm, spindle bore: 72 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 268 mm, travel distance Z-axis: 2,000 mm, spindle motor power: 15 W, overall weight: 4,700 kg, coolant supply: 8 bar, tailstock quill stroke: 200 mm, number of driven tool stations in tool turret 3: 8, tool holder type of tool turret 1: VDI 40, Equipment: CE marking, USB port, centralized greasing system, type plate available, Machine in very good condition with C-axis and driven tools, Renishaw tool probe. Tool turret with 8 positions, all driven. Chip conveyor, oil mist separator. Three driven angle tool holders, three driven straight tool holders. 6 VDI40 tool posts, 2 steady rests, tailstock with hydraulic quill. Fagor 8055 control, RS, USB, and Ethernet (RJ) interfaces. DTR machine documentation, Fagor 8055 programming manual in English and Polish, PC communication software. Machine under power in Poznań, inspection arrangement possible. Tel. 602-58-23-51 Gtjdpfxjx Tclpj Afwet

Condition: good (used), Year of construction: 2007, Yeo Sheng Machinery TSH-TUVB-1010 Keyway Broaching Machine Capacity: 10 Ton Includes various tools The machine is in good working condition. Gsdjx D Dihjpfx Afwott Location: Hamont-Achel, Belgium The seller is not liable for typographical or transmission errors. The machine's appearance, technical condition, and wear correspond to its age; used machines are sold without warranty. The displayed price is exclusive of VAT.

Condition: good (used), 1 x Burnely Packaging Machinery Heat Shrink Tunnel Godpfxexrcyzo Afwett Model: PE500/300 Fully tested Purchased and installed for a trail product, no longer needed. Comes with new replacement belts Located in Leek, UK

Condition: used, Year of construction: 1981, National 2-3 Hot Former induction heater, feeder, straightener Gtsdpfxswl Iw Uj Afwet

Year of construction: 2024, condition: used, functionality: fully functional, machine/vehicle number: 1731124010219J, Allpax Angle Sealing Device / Packaging Machine Manufacturer: Hualian Machinery Group Model: PTHW-WS-5045 Serial No.: 1731124010219J Year of Manufacture: 01/2024 Condition: used Color: light grey Internal Item Number: 2025120105 Pick-up Address: Industriestraße 5 (47918 Tönisvorst) The machine was in operation until dismantling. Tailor-made Solutions for Your Intralogistics Gjdpfx Ajx Ak Nrofwett For roller conveyors, belt conveyors, inclined conveyors, or telescopic conveyors for loading and unloading your goods, as well as packaging machines, we are your competent partner! We are happy to provide you with an individual offer or advise you on system design or installation queries. Simply let us know your requirements and site conditions. Benefit from our years of experience and excellent network of experts. We have already successfully completed projects for companies in a variety of sectors, such as logistics, the pharmaceutical industry, trades, or the electronics sector. Together, we will find ways to optimise your processes and material flow cost-effectively and sustainably. We can also offer fully automatic sorting systems or complementary components, such as picking racks or containers.

Condition: good (used), 1 x Burnely Packaging Machinery Heat Shrink Tunnel Model: PE500/300 Fully tested Purchased and installed for a trail product, no longer needed. Comes with new replacement belts Godpfxjxrcyuj Afwstt Located in Leek, UK