Used Spin for sale (1,457)

Condition: excellent (used), functionality: fully functional, Brother Hi-Spin riveting machine 5mm high spin Type: BR1-103 - Crimping ability (Mild steel rivet) φ5mm or less - Spinning head: 20-40mm - Distance between tabletop and punch: 60-180mm - Table working surface size: 310 x 180mm - Processing time setting range: 0.3-5 seconds - Normal pressure: (Varies depending on pressing conditions) 2-5kg/cm2 Air consumption: Power supply and motor Three-phase 200V 0.2kw 4Pole Machine size Podpswdwv Rjfx Adljpr Width 390 x depth 510 x height 1000mm Machine weight 95kg

Condition: good (used), Make: Keilinghaus Type: PLS 1500 HY Specifications Metric US Standard Max. blank / workpiece over bed 3000 Max. blank / workpiece in the gap 5000 Ø Centre height over bed 1500 mm Distance between centers 2600 mm Maximum sheet thickness 15 mm Stroke X-Axis 1000 mm Stroke Y-Axis 2800 mm Speedrange 240 Rpm Power 75 kW Spindle taper head stock DIN 55027 - Size 15 DIN / Camlock Stroke pinole quill Ppedpfxekvnnko Adler 1200 mm Dimensions (Estimate) Length 10000 mm Width 8000 mm Height 4500 mm Weight 60000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2021, operating hours: 4,642 h, machine/vehicle number: 2158, spindle speed (min.): 50 rpm, spindle speed (max.): 400 rpm, feed length Z-axis: 700 mm, controller manufacturer: Siemens, MJC M21-04 SPT-26.150 Machine Data Description: MJC M21-04 SPT-26.150 Installation dimensions: approx. 10,000 × 4,000 × 2,300 mm Machine weight: 19,088 kg Noise level: 80 dB Operating hours: 4,642 h Axis Data Slide travel (Z-axis): 700 mm Feed force (slide): 70 kN Feed speed (slide): 0–125 mm/s Upper slide travel (X-axis): 375 mm Force (upper slide): 70 kN Speed (upper slide): 0–125 mm/s Spindle / Drive Chuck: spring-loaded Spindle speed range: 50–400 rpm Spindle motor: 150 HP (AC vector drive) Hydraulic unit: 20 HP (“Green”) Supply Data Minimum fuel pressure: 1.7 bar (25 psi) Minimum oxygen pressure: 8.25 bar (120 psi) Power requirement: 300 A at 460 V / 50 Hz Max. voltage fluctuation: ±10 % Media / Connections Hydraulic tank oil volume: 150 gallons Hydraulic cooling water consumption: 10 gpm Cooling water connection: ¾", min. 2 bar Max. cooling water temperature: 23 °C Pjdpfx Adoy E Hvcoljpr Control CNC control: Siemens 840D sl PLC system: Siemens Step 7

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, power: 2.2 kW (2.99 HP), As-new screw compressor on 270 liter tank, power 2.2 kW, max. working pressure 10 bar. Also equipped with air dryer. Pjdpfx Ajyzb Sdjdljpr

Condition: good (used), Year of construction: 1980, Spinning machine LEIFELD Ppedpfxex Ttple Adlor Spinning moulds

Year of construction: 2024, condition: new, machine/vehicle number: SPIN500, Co-lead Spin Dryer is a small-sized vegetable centrifuge machine that removes excess water from leafy vegetables and other fresh produce. The basket with the product is placed in the machine and once the lid is closed, the engine will start running. A magnet locks the lid during centrifuging. Ppsdpfxjiniz Dj Adlor Suitable for dewatering leafy vegetables, fruit, and vegetable material surface after cutting. The body is made of SUS304 stainless steel, which has a delicate appearance. It is equipped with a basket for dehydration, which is more convenient to store. The machine can set the dehydration time and dehydration speed, and the operation is stable. It is suitable for all kinds of fruit and vegetable industries, and large and medium-sized industrial catering enterprises’ demand for vegetable dehydration. * Use frequency conversion centrifugal technology to complete the surface dehydration of the material; * Use frequency conversion technology and optical sensing technology to realize the draining time and speed, and turn on and off control. * Full open design, easy to install and take out during Vegetable Processing. * Driving by frequency conversion adjusting speed three or single asynchronous motor, stable running, convenient for speed adjustment

Condition: good (used), Year of construction: 1980, center width: 2,350 mm, center height: 1,200 mm, product height (max.): 6 mm, Manufacturer: LEIFELD Type: PLB 1200 Year of construction: 1980 Specifications: Metric Metric US Standard Max. Product over bed 1200 Max. Product in the pit 2260 Ø Center height above the bed 600 mm Distance between the centers 2350 mm Length of the gap 400 mm Max. Sheet thickness 6 mm Stroke X-Axis 1200 mm Stroke Y-axis 300 mm rotational speed 6 - 675 rpm Power output 40 kW Tailstock quill 750 mm Dimensions (estimate) length 4500 mm Pjdpeq Dqdisfx Adlepr width 3200 mm height 2500 mm weight 10200 kg Please note: The information on this page is given in good faith and to the best of our knowledge and belief, and where possible obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Year of construction: 1989, condition: not inspected (used), machine/vehicle number: 117-0690-7892 Messemodell, Brief Description: - 2x12 spinning positions - SE9 boxes Pedpfsw Rldzox Adljpr - Corolab - 1 start-up trolley - SRZ (precision winding) - Machine documentation available Last Use (Jan. 2024): - Application-specific product testing of polyester fibers - 0.9 - 1.7 dtex, 32-38 mm cut length - Approx. 45kg/sample to assess running behavior under constant machine settings - Mainly in Nm34, Nm50 - Untested, only for spare parts use! The machine has been dismantled and stored, but can be inspected on site. Pick-up only by buyer in 14727 Premnitz, no shipping. If interested, we look forward to your offer. Written inquiries only, please.

Condition: good (used), Year of construction: 1970, center width: 2,350 mm, center height: 2,400 mm, Max. blank / workpiece over bed:2400 Ppjdpfx Adextaxwslor Centre height over bed: 1200mm Distance between centers: 2350mm Length of the gap: 400mm Maximum sheet thickness: 6mm Stroke X-Axis: 1200mm Stroke Y-Axis: 300mm Speedrange: 6 - 675Rpm Power: 40kW Stroke pinole quill: 1200mm Length: 4500mm Width: 3200mm Height: 2500mm Weight: 10200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2017, condition: ready for operation (used), A spinning, drawing and winding line for the production of monofilament yarns, multifilament FDY and POY is available. Spinning positions: 24, yarn ends: 192, drafting: cold and hot godets, package change: without yarn breakage, number of godets heated/cold: 50/50, number of winders: 24 (+2 reserve winders). Including various spare parts for the machine and electronics. Documentation available. On-site inspection is possible. Ppodpfeuanq Tsx Adljr

Condition: used, Year of construction: 2022, - Brand : Comet - Type: Leopard 25 - Year of construction: 2025 - Weight: 4070 kg. - Hours : 652 hours - Drive: Petrol + 220 volts - Working height: 25.5 meters Ppedpewhqifsfx Adlsr - Lateral reach: 11.5 meters - Lifting capacity: 200 kg. - Remote control - Adjustable tracks - Rotatable work tray - New safety inspection - Aerial work platform book available - CE document available - Video on our website - Trade-in and transport possible * Brand: Comet *Type: Leopard 25 * Construction year: 2025 * Weight: 4070 kg. * Hours: 652 hours * Drive: Petrol + 220 volts * Working height: 25.5 meters * Lateral reach: 11.5 meters * Lifting capacity: 200 kg.

Condition: ready for operation (used), Year of construction: 1965, functionality: fully functional, center width: 600 mm, center height: 300 mm, spindle motor power: 3,000 W, spindle speed (min.): 200 rpm, spindle speed (max.): 2,000 rpm, overall weight: 500 kg, Manual spinning machine, Make: Pensel Technical data: Centre height: 300 mm Centre distance: 600 mm Machine length: 1500 mm Spindle motor: 3 kW Speeds: 200 – 2300 rpm (stepless) Spindle mount: M 36 Ppedoxp Sddopfx Adljr Manual steel rest Tailstock stroke: 300 mm (smooth sliding quill) Machine weight approx.: 500 kg Machine description: - Powerful, lightweight spinning machine - Overhauled and ready for use - Main spindle with new bearings - New three-phase motor and belt drive - Main spindle with stepless speed control - New electrical control system - Newly painted

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, overall weight: 300 kg, Cross Slide – Support Type PS 35 Support suitable for hand-operated bending machines with a 350 mm center height Technical Data Longitudinal slide travel: 360 mm Cross slide travel: 150 mm Height: 325 mm Rotary table diameter: 215 mm Shear length: 550 mm Weight approx.: 300 kg Machine Description - Technically inspected and ready for operation - Robust cast iron construction - Adjustable dovetail guides Ppodexp Sfhepfx Adler - Trapezoidal spindle for longitudinal and cross slide - Large dimensioned handwheels

Condition: ready for operation (used), Year of construction: 1970, functionality: fully functional, center width: 600 mm, center height: 300 mm, spindle motor power: 3,000 W, spindle speed (min.): 200 rpm, spindle speed (max.): 2,000 rpm, quill stroke: 300 mm, overall weight: 800 kg, input voltage: 400 V, type of input current: three-phase, Hand spinning machine, make Schulte Technical data: Centre height: 300 mm Centre distance: 600 mm Machine length: 1500 mm Spindle motor: 3 kW Speeds: 200 – 2000 rpm (stepless adjustment) Spindle mount: M 36 Manual tool rest Tailstock stroke: 300 mm (quill travel via handwheel) Machine weight approx.: 800 kg Pedpexp Sc Hsfx Adlepr Machine description: - Powerful, robust spinning machine - Overhauled and ready for operation - Main spindle newly bearing-mounted - New three-phase motor and belt drive - Main spindle with stepless speed control - New electrical control - Newly painted

Condition: ready for operation (used), Year of construction: 1980, functionality: fully functional, center width: 1,400 mm, center height: 400 mm, spindle motor power: 3,000 W, total length: 2,400 mm, spindle speed (min.): 100 rpm, spindle speed (max.): 1,200 rpm, Manual spinning machine make Leifeld Type Plb 300 License plate - Powerful, solid machine - Very good technical machine condition - All functions checked - Electrical controls and operating buttons new - Motor and belt drive new - New paint finish - green Technical data Center height mm 400 Center width mm 1400 Machine bed with offset + bridge mm 200 deep / 350 wide Machine length mm 2400 Spindle motor kW 3 4-speed gearbox Speeds - infinitely variable approx. 1/min 100 - 1200 Spindle holder M 64 Manual steel support - length mm 450 Ppjdpovcfhmsfx Adljr Tailstock - stroke mm 280 Quill - fine adjustment Morse taper MK 3 Machine weight approx. kg 1200 Special equipment built into the machine - Center height mm 400 - Center width mm 1400 - M-bed with crank + bridge mm 200 deep / 350 wide - Morse taper MK 3 - Stepless spindle speeds in the indexing steps due to frequency-controlled drive motor - Multi-plate clutch and brake - Hollow bored main spindle - Electrical switching Additional equipment - on request - Manual cross support PS 30 / 300 - Cut-off device

Condition: ready for operation (used), Year of construction: 1976, functionality: fully functional, center width: 800 mm, center height: 350 mm, spindle motor power: 4,000 W, total length: 21,000 mm, spindle speed (min.): 200 rpm, spindle speed (max.): 1,000 rpm, overall weight: 1,100 kg, input voltage: 380 V, power: 4 kW (5.44 HP), type of input current: three-phase, Hand-operated pressing machine Manufacturer: Leifeld Type: Plb 300 - High-performance, robust machine - Excellent technical condition - All functions tested - New electrical system and push-button controls - Newly painted Technical Data Podpfx Adjxp Sb Aelspr Centre height: mm 350 Centre distance: mm 800 Machine length: mm 2100 Spindle motor: kW 4.0 4-speed gearbox Speeds: approx. rpm 200 – 1000 Spindle mount: M60 DIN 800 Manual tool rest Tailstock stroke: mm 280 Precise fine adjustment on tailstock quill Morse taper: MT 3 Machine weight: approx. kg 1100 Special equipment integrated in the machine: - Centre height mm 350 - Ball bearing live centre MT 3 - Stepless spindle speed adjustment within gearbox ranges using frequency-controlled drive motor - Electrical system - Oil circulation lubrication On request: - Cross slide PS30/300

Condition: good (used), Working diameter Ø 2400mm Ppedpjucdh Tefx Adlor Max sheet thickness: 9,5 mm

Year of construction: 2002, condition: excellent (used), More information on request Pedpfx Adoghg H Ejlspr

Condition: used, Thermo Multifuge 1S-R cooled centrifuge Centrifuge centrifugal machine Voltage: 230V, 50/60Hz Current: 9,2A Psdpfjt Eurisx Adlopr Power: 1520W Temperature range: -9 °C to + 40 °C Speed: 15000 rpm depending on rotor Bucket 4x type: Heraeus 75002001 L Maximum load: 540 g Maximum speed: 4700 rpm Inserts 4x red: 12 holes of approx. 16 x 60 mm External dimensions (W) x (D) x (H): 68 x 65 x 36 cm For technical data, see type plate. You are welcome to come by for a viewing. We will be happy to arrange a cost-effective forwarding agent for you. organize! You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved.

Year of construction: 2026, condition: new, functionality: fully functional, SPIN DRYER VSD500 An advanced vegetable and lettuce spin dryer with an ergonomic design and counter rotating centrifuge cycle. This machine efficiently dries lettuce, vegetables, fruits, and Ppedjixldvopfx Adljr more, preserving quality and extending shelf life. The VSD500 features an open design for easy cleaning, with no screw-related crevices to trap dirt, and a convenient rear lid locking mechanism. Its centrifuge cycle alternates rotation midway to enhance product loosening and ensures efficient water drainage through a pin-type pick-up system that adjusts the basket's speed. Upgrade your kitchen with the VSD500 for unmatched efficiency and excellence in food drying. KEY BENEFITS Efficient Drying Performance: The VSD500 spin dryer features an ergonomic design and counter-rotating centrifuge cycle, ensuring efficient drying of lettuce, vegetables, fruits, and more. Quality Preservation: This advanced spin dryer preserves the quality of produce, extending shelf life and maintaining freshness. Easy Cleaning: The open design of the centrifuge area allows for effortless access, making cleaning and maintenance tasks swift and simple. Hygienic Design: The absence of screw-related crevices in the spinning area eliminates dirt traps, ensuring a more hygienic operation. Convenient Lid-Locking Mechanism: The lid-locking mechanism is conveniently located at the rear of the machine housing, enhancing ease of use. Improved Water Drainage and Rotation: The centrifuge cycle alternates rotation halfway to improve product loosening, and the The pin-type pick-up of the rotating basket adjusts speed efficiently while ensuring effective water drainage.

Condition: used, Polymer Recovery, Dremel Style plastic washer and spin dryer vibratory screener, gas blower system, sink float tank and feed hopper with augers, feed hopper will need to be removed from I-beam frame, unit is bolted and welded to frame (does not include lower I-beam frame), includes all control panels, winning bidder responsible for proper disconnection and removal of machine. Psdpfxoxd D I Rj Adljpr

Condition: not inspected (used), Year of construction: 2013, operating hours: 23,758 h, machine/vehicle number: AZ 0170, Very well-maintained and well-preserved CNC lathe SPINNER TC 300-52 SMCY in good condition! ● Terms of delivery: Free loaded onto truck ● Location: 57562 Herdorf ● Availability: Immediately, by arrangement. The exact collection date will be mutually agreed upon and set as binding. Loading will be carried out on this day by our disassembly team on site. Please note that once the date is set, it cannot be postponed. ● Terms of payment: Advance payment - by bank transfer ● Internal reference no.: TM1 ● Under power for inspection: Yes Technical data: Work area: Max. swing diameter: approx. 300 mm Max. turning length: approx. 250 / 200 mm Max. turning diameter: approx. 400 mm Travel: Travel X/Z: 180 / -400 mm Travel Y: +40 / -40 mm Max. rapid traverse X/Z: 15 / 24 m/min TURNING SPINDLE 1: Max. speed: 5000 rpm Chuck size: 210 mm Spindle bore: 52 mm Spindle power: 15 / 19 kW (Siemens + Fanuc) Torque: 96 / 121 Nm (Siemens + Fanuc) TURNING SPINDLE 2: Max. speed: 7000 rpm Chuck size: 130 mm Spindle power: 6 / 8 kW Torque: 38 / 60 Nm TURRET: Number of tools: 12 Tool holder: VDI 25 Live tools: 12 Max. speed: 6000 rpm Power: 3 / 4.6 kW (Siemens) 1 / 1.50 kW (Fanuc) Torque: 9.75 / 14.75 Nm (Siemens) 7 / 31.8 Nm (Fanuc) Scope of delivery: ● Available manuals/documentation ● Collet chucks (2 units, for main and sub spindle) ● Various collets and tool holders including: Collets type 364 E W25 80-5 from Ø 3–22 mm (in 0.5 mm increments) 2 × combination holders (internal and external coolant supply), type EWS 17.2525TDX 105 3 × collet holders EWS 31.2525 DTDX105 2 × Garant twin holders, axial Note: ● The tool holders visible in the turret on the machine are explicitly not included in the scope of delivery! Dimensions & weights: ● Set-up dimensions L x W x H approx.: 2000 × 1600 × 2000 mm ● Weight approx.: 3500 kg Notice: At the end of this listing you will find several pictures of the bar feeder. This is not included in the scope of delivery and can be purchased separately upon request. Additional notes: ► On request, we can offer transportation to your specified location Pedpsy E Rx Iefx Adlspr ► The price quoted is net, plus VAT ► The item is sold excluding any warranty ► Technical data without guarantee ► Subject to prior sale ❗ Sale of the item is exclusively to business customers ❗

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 360 mm, travel distance Z-axis: 900 mm, controller manufacturer: SIEMENS, controller model: 840D, number of axes: 4, This 4-axis SPINNER TC800 110 SMCY was manufactured in 2016. It features a maximum X-axis travel of 360 mm and Z-axis travel of 900 mm, along with a sub spindle and live tool capabilities. If you are looking to get high-quality turning capabilities, consider the SPINNER TC800 110 SMCY horizontal turning machine we have for sale. Contact us for further details. Ppsdpfx Adey En Awsler • Tool setter Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 2,660 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 460 mm, controller manufacturer: SIEMENS, controller model: 840D, spindle speed (max.): 10,000 rpm, number of axes: 5, This 5-axis SPINNER U5-2520 was manufactured in 2016. It features an impressive X-axis travel of 2660 mm, Y-axis travel of 520 mm, and Z-axis travel of 460 mm. The machine is equipped with a spindle speed of 10,000 rpm and an automatic tool changer with 2x52 positions. If you are looking to get high-quality machining capabilities, consider the SPINNER U5-2520 vertical machining centre we have for sale. Contact us for further details. • B-axis: +110° / -90° • ATC: 2 x 52 tools Pjdpfx Aoy Efxiodlspr Technical Specification Taper Size SK 40

Condition: good (used), Year of construction: 2008, Ref. -No.: 10474 Manufacturer: SPINNER Type: TC77 MCY Year of construction: 2008 Type of control: CNC Control: Siemens 840 D Storage location: Halberstadt Country of origin: Germany Machine-No.: AP0XXXXX Chuck diameter: 210 mm Tailstock - diameter: 110 mm Feed speed X / Z: 15/24 mm / min Turning Diameter: 500 mm Max. Torque: 113 Nm Travel -X Axis: 350 mm Travel -Y Axis: 230mm (-110mm +120mm) mm Podey Ed Ebepfx Adlepr Travel -Z Axis: 1160 mm Distance Between Centres: 800 mm Spindle 1 spindle head diameter (flange): A8 mm Spindle 2 spindle head diameter (flange): A6 mm Quills Morse taper: MK4 Turret places: 12 Pcs Machine length: 3250 mm Machine width: 1980 mm Machine Height: 2090 mm Weight Of The Machine Ca.: 7,5 t Max. swing diameter: 690 mm Further information: Spindle head: A8 Bar capacity: 77mm Bar capacity: 52mm Number of rotating tool positions: 12 Y axis + C axis. Machine can be inspected under power by arrangement.