Used Spindle Grinding Machine for sale (65,506)

Condition: used, Universal external and internal cylindrical grinding machine ERWIN JUNKER, Type BUAJ 29 NC External cylindrical grinding machine, internal cylindrical grinding machine Manufacturer's No. 3126, Year of manufacture 2001 Center distance max. 800 mm Workpiece grinding length max. 800 mm Center height 150 mm Swivel diameter max. 295 mm Workpiece weight max. 120 kg Workpiece spindle speed 20 - 750 rpm Spindle stock, internal taper MK 5 Spindle stock, short taper flange DIN 55027, Size 5, Ø 82 mm Spindle stock, spindle bore 36 mm Spindle stock adjustment 355 mm Tailstock, internal taper MK 4 Grinding wheel diameter max. 400 mm Grinding wheel width max. 63 mm Grinding wheel bore Ø 127 mm Grinding wheel peripheral speed 45 m/sec Automatic spindle stock feed 0.001 Manual feed 0.001 mm Hydraulic table movement 0-7.5 m/min Motor power, grinding spindle 7.5 kW Motor power, workpiece spindle stock 1.1 kW Motor power, internal grinding unit 1.75 kW Mains connection 400 Volt, 50 Hz - FANUC control, Type Power Mate-Model D - Grinding spindle stock swivels from +45° to -15° - Workpiece spindle stock swivels 90° - Table can be tilted for taper grinding up to 8°30" - Support/pinole for the workpiece spindle stock with internal taper MK 4 - Internal grinding unit for swiveling in - Internal grinding spindle with collet chuck, Ø 6 mm - Coolant system located beside the machine - Machine equipped with one grinding wheel, Ø 400 x 50 mm - 1 three-jaw chuck TOS, Ø 160 mm - 1 mechanical round magnetic chuck, Ø 200 mm - Collet chuck system with various collets - Various attachments for the internal grinding unit - 1 diamond grinding wheel dresser - Other accessories as shown in the pictures - Operating manual, hydraulic diagram, electrical diagram Space requirement for cylindrical grinding machine with band filter L x W x H 3200 x 2500 x 1900 mm Weight 5000 kg Csdpfx Aj Aard Njbrshd In very good condition

Condition: new, Year of construction: 2026, functionality: fully functional, Type FNX 640 NC-T, fully enclosed Magnetic clamping plate/grinding area 600 x 400 mm Spindle speed 3000 rpm, drive power 7.5 kW Operating voltage 400 V / 50 Hz Table axis with V-shaped flat guide and toothed belt drive Y/Z axis with linear guides and ball screw drive Table load 300 kg Control: FANUC NC-T with Stöckel touch-screen interface Grinding-related equipment: Folding dresser Grinding mist extraction Strip filter system Cedjz Hyaropfx Abrshd Options: Cycle chaining Profile grinding VPN connection for remote diagnostics/remote maintenance etc. The machine is fully functional and can be inspected at the manufacturer's premises by appointment.

Condition: good (used), Year of construction: 1981, functionality: fully functional, overall weight: 2,200 kg, Machine in good condition. Magnetic clamping plate, 600x200. 1 flange. Cjdo Afp R Dspfx Abrjhd Can be tested while powered on.

Condition: like new (used), Year of construction: 2006, operating hours: 4 h, functionality: fully functional, machine/vehicle number: GB010168, workpiece weight (max.): 80 kg, type of input current: three-phase, workpiece diameter between centers: 200 mm, workpiece length between centers: 500 mm, grinding wheel width: 355 mm, spindle speed (max.): 2,000 rpm, overall weight: 2,800 kg, input frequency: 50 Hz, input voltage: 400 V, Brandnew (showroommodel) cilindrical grinder Brand: Supertec TYPE: G20P-50C Servicenumber: 10144 Machine weighs: 2800 kgs Dimensions: 2280 + 2280 + 1940 mm Please find the detailed specs in the pictures. Codpfx Abew Edwderjhd If there are any questions please do not hesitate to contact AMTC and ask for Joost. Preferably during office hours from 8 AM to 16:00 PM We can can arrange transport with and external company.

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS CONTROL Control system: SIDAC system control MAGNETIC CHUCK Magnet dimensions: 1,000 x 500 mm GRINDING WHEEL Codpfxs Adu Swe Abrjhd Grinding wheel diameter: approx. 350 mm MACHINE DETAILS GENERAL Machine type: Surface grinding machine Manufacturer: Minini Model: JMF 1100CN Year of manufacture: 1992 Machine number: 1,000 DIMENSIONS AND WEIGHT Length: 5,000 mm Width: 2,400 mm Height: 2,700 mm Weight: 5,000 kg EQUIPMENT Diaform dressing device Important note: the clamping device shown on the magnetic chuck is not included in the sale and delivery!

Condition: excellent (used), functionality: fully functional, HOFMANN, Type GS-2, Max. disc diameter 600 mm Chedpfs Ahi U Tsx Abrsd Max. load capacity approx. 150 kg Balancing mandrel length 290 mm Dimensions W x D x H approx. 750 x 350 x 450 mm Weight approx. 30 kg . Special price: EUR 500 net, packaged .

Condition: used, Year of construction: 2012, grinding diameter 200 mm profile depth 30 mm workpiece length - max. 2790 mm grinding length 2310 mm Maximum pitch of the screw -/+ 50 ° Maximum number of gears 1-999 workpiece weight max. 250 kg z-travel 3000 mm x-travel 185 mm max. dia. of grinding wheel 450-330 mm Grinding wheel thickness (with recess) 20-70 mm roll diameter 120 mm Speed of the grinding wheel spindle 1500 - 6000 U/min Workpiece spindle speed 0 - 600 U/min Speed of the pitch axis 0-4 1/min Chjdpfjza Hqzjx Abrsd Speed of the dressing spindle 1500-16000 1/min feed speed z-axis 0-10000 mm/min feed speed x-axis 0-10000 mm/min total power requirement 150 kVA control Siemens Sinumerik 840D SL weight of the machine ca. 30 t dimensions of the machine ca. 10,65 x 5,37 x 2,75 m Features/Accessories: - Filtration system: KNOLL VL1500/5000 - many accessories—list to follow - documentation

Condition: used, Year of construction: 2014, Sanding belt dimensions: 150 x 2000 mm Csdpfe Ahp Husx Abrehd Contact wheel width/diameter: 200/200 mm Sanding belt speed: 14.5/29 m/s Drive motor: 380 V, 2.1/2.8 kW Space requirement: 1070 x 530 x 1130 mm Weight: 110 kg

Condition: excellent (used), functionality: fully functional, Swivel spindle milling machine KÖLLE F 45 in very good condition; this machine comes from an assembly company and has been idle for the last few years, as it was no longer needed. Everything functions perfectly. All bearings and guides are in good condition; the machine runs very smoothly. Year of manufacture: 1990 with control panel on top Both fence jaws on the milling fence can be adjusted in depth, with fine adjustment and scale, allowing for planing work, e.g., on a gluing profile. The entire milling fence can also be adjusted in depth using a handwheel and a leadscrew, enabling very precise and fast adjustments. with AIGNER integral fence with spindle locking lever Chips can be removed very effectively with 2 extraction ports, 125 mm on the milling fence and 100 mm on the machine table. with 30 mm spindle, which can be swiveled steplessly from -5 to 45°; the spindle is swiveled electrically with a very precise display; fine adjustment can be made manually with a handwheel. The height adjustment is also electric, and a handwheel is also available for fine adjustment. with right/left rotation We will personally deliver and demonstrate the machine anywhere in Germany for €220.00, so you have no risk when purchasing; shipping to Austria and the rest of the EU is also possible upon request. with a large table opening of 375 mm, which can be reduced by using various rings (this allows for the use of cutters with a very large diameter, and you can also safely mill with small cutters). with 3000, 4000, 5000, 6000, 8000 and 10000 rpm the table is made of heavily ribbed cast iron with 30 mm spindle in the machine; another spindle can also be installed very robust and durable design; the machine was built for heavy-duty milling operations and is suitable for all milling applications. optimal power transmission through belt drive with instruction manual with 3-roller feed system HOL HER, type ET 117 the feed system has right/left rotation and 8 speeds; the feed rollers are individually mounted and are all in new condition. the machine table is 1000 mm deep and 1200 mm wide; it has an extendable support table 1200 mm long. the machine is ready for immediate use. 380 V, 4700 and 5700 W due to the 2 speeds with all necessary safety devices, motor brake, and emergency stop switch; the machine is approved by the German Wood Trade Association (Holz-BG) and has the GS safety mark. Chjdpfszt Ai Eex Abrsd the machine weighs approximately 1000 kg with motor protection switch against overload professional-grade machine, not a hardware store reject optimal, simple, fast, and safe operation

Condition: good (used), Year of construction: 1984, Ref. -No.: 10545 Manufacturer: OKAMOTO Type: PSG 63 UAN Year of construction: 1984 Type of control: CNC-Steuerung Control: CNC Storage location: Halberstadt Country of origin: Japan Cross movement of the grinding wheel head: 340 mm Workpiece spindle speed range: 1500 RPM Max. Grinding length: 600 mm Peripheral speed: 1800 m / s Grinding Width: 320 mm Max. Table longitudinal movement: 750 mm Grinding Wheel Hole Diameter: 127 mm Dimensions Of The Machine Ca.: 2,63 x 1,88 x 1,85 m Grinding Wheel Width: 40 mm Grinding wheel dimensions: 355 x 38 mm Machine weight: 2200 kg Grinding wheel diameter (max.): 350 mm Max. distance table-spindle center: 500 mm Table Length: 605 mm Table Width: 300 mm T-Slots: 3 x 17 mm Further information: Cjdj Ahmu Nepfx Abrehd The machine can be viewed under power by arrangement.

Condition: good (used), Year of construction: 1998, functionality: fully functional, Machine was overhauled in 2017! -Distance from the workpiece spindle head to the front edge of the internal grinding spindle carrier: max. 540mm -Longitudinal adjustment of the internal grinding unit on the table: max. 210mm -Feed rate: 0.0005mm -Grinding head mounting bore: Ø 80mm x L: 180mm Equipment: Chodpfx Aboz Rm Swjred -Truing device with diamond insert Work performed: -Guides renewed -Grinding spindle overhauled -Machine completely disassembled and wear parts replaced -Repainted

Condition: like new (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 5060-0281, travel distance X-axis: 900 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, Beautiful and well-maintained machine. Csdpfxe Afzbuj Abrjhd Diamond roller straightening machine. Programmable water pressure, 5 levels.

Condition: used, Year of construction: 2012, overall weight: 7,000 kg, grinding spindle speed: 4,400 rpm, workpiece spindle speed (max.): 250 rpm, Cylindrical grinding machine Manufacturer: JUNKER Type: Jucam 1000 /11S Year of manufacture: 2012 Cedpfxjx H Ando Abrohd Technical data: - Workpiece diameter: 15–70 mm - Swing diameter: max. 150 mm - Clamping length: max. 500 mm - Swing diameter over steady rest area: 70 mm Workpiece spindle: - Dimensions: 150 x 300 mm - Max. speed: 250 rpm Tailstock: - Longitudinal adjustment: manual via sprocket Tailstock quill: - Fixed center MT 4 (Junker D75 mm) - Clamping pressure Adjustable by hydraulics Grinding table: - Travel path - Z: max. 1,000 mm - Feed Z-axis (CNC-controlled) Grinding spindle I: - Dimensions: D 205 x 450 mm - Flange diameter: D 190 mm - Standard collar: D 127 mm - Drive: 30 kW - Speed control via frequency converter - Max. speed: 4,400 rpm Grinding wheel I: - Type: Borazon (CBN) or Diamond - Diameter: 450 mm - Bore: D 127 mm - Peripheral speed: max. 90 m/sec Steady rest: - Type: GR-3520-NR - Diameter range: D 20 – D 35 mm Dressing spindle: - Dimensions: D 80 x 250 mm - Flange: D 100 - Standard collar: D 75 - Drive: 1.8 kW - Max. speed: 24,000 rpm - Machine weight: approx. 7.0 t 2 identical machines are available. In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are included in the scope of delivery only if noted in the additional information. Subject to technical changes, errors, and prior sale.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, OMN RV-500 Includes cooling system, dressing unit, and magnet. Cjdpoz R Rpnjfx Abrohd

Condition: used, grinding length:650 mm grinding width:450 mm workpiece height:425 (ohne Magnetplatte) mm max. workpiece weight:600 kg weight of the machine ca.:3,8 t total power requirement:15 kW machine dimensions approx. WxHxD:3,0 x 2,4 x 2,3 m Used/reconditioned surface grinding machine, make GER, type RSA-650. Automatic infeed in all 3 axes. Machine geometrically overhauled, repainted (RAL6011, green), all functions tested, accuracy checked. OVERHAUL SCOPE: Machine completely disassembled, all components thoroughly cleaned and tested for complete functionality. Main spindle newly mounted, concentricity 3 µ. All guideways newly scraped in new machine geometry. Wear parts replaced, defective components repaired or replaced. Reassembly, complete functional test and internal acceptance. Machine repainted. Machine in perfect condition, ready for production. MEASURED GEOMETRIC ACCURACIES: Actual geometric accuracy after overhaul, measurement with dial gauge. Geometry of machine axes X and Z X = longitudinal axis 650 mm Z = transverse axis 450 mm Measurement magnet traversed with dial gauge. X axis = Max. Deviation 0,008 mm Z axis = Max. Deviation 0,005 mm INCL. THE FOLLOWING ACCESSORIES: -Electro-magnetic clamping plate, with fine longitudinal pole pitch. dimensions 600 x 400mm -demagnetizing device -Complete coolant device with paper band filter - Digital display of the vertical axis (Y-axis), make Sony -Technical documentation in English language -1 pieces grinding wheel holders -1 piece grinding wheel dresser, mounted above the grinding wheel with manual infeed and automatic (hydraulically operated) transverse movement - 1 set of setting elements You can find more information in the attachment. Payment: Cedpjfkg H Tsfx Abrshd 100% before loading the machine Warranty: 6 months on the geometry and the new parts demonstrably installed. No general legal warranty.

Condition: reconditioned (used), center height: 200 mm, grinding length: 1,000 mm, center width: 1,000 mm, total width: 1,500 mm, total length: 2,800 mm, total height: 1,700 mm, grinding wheel width: 127 mm, spindle speed (max.): 1,500 rpm, External Cylindrical Grinding Machine Manufacturer: COMETA Model: SUSY Technical Data: - Center height: 200 mm - Distance between centers: 1,000 mm - Grinding length: 1,000 mm - Max. workpiece diameter: 360 mm - Grinding wheel width: 127 mm - Spindle speed: 1,500 rpm - Speed range – workpiece spindle: 15 – 320 rpm - Dimensions (L x W x H): 2.80 x 1.50 x 1.70 m Equipment & Accessories: - Machine has been overhauled - Guideways re-scraped - Spindle bearings replaced - New control cabinet In our assessment, the machine is in good used condition and can be inspected under power by appointment. Chjdpfey Ay N Dsx Abred Accessories, tools, and work-holding devices shown are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale.

Condition: good (used), Year of construction: 1989, functionality: fully functional, total width: 3,560 mm, total length: 3,300 mm, total height: 2,210 mm, overall weight: 5,000 kg, TSCHUDIN HTG 52 CNC – CNC External Cylindrical Grinding Machine CNC-controlled external cylindrical grinding machine from the Swiss manufacturer TSCHUDIN, based in Grenchen. The machine is equipped with a Marposs E14 CNC control, a Marposs E38 measuring and monitoring unit, and a Heldt & Rossi servo drive control. The equipment includes an external cylindrical grinding spindle, a workpiece spindle, a tailstock, and a coolant supply. The machine has various clamping and holding devices, as well as a separate control cabinet. Technical data: - Manufacturer: TSCHUDIN, Grenchen (Switzerland) - Model: HTG 52 CNC - Type designation: 365 - Machine type: CNC external cylindrical grinding machine - CNC control: Marposs E14 - Measuring and monitoring unit: Marposs E38 - Servo drive control: Heldt & Rossi SM 807 DC - Grinding wheel diameter: 500 mm (identification of the installed wheel) - Mains connection: 3 × 380 V - Frequency: 50 Hz - Current consumption: 19.7 A - Power rating according to the nameplate: 13 kW Equipment: Chedpfx As Ahyxiebrjd - CNC control Marposs E14 - Marposs E38 measuring and monitoring unit - Heldt & Rossi servo drive control - External cylindrical grinding spindle with grinding wheel - Workpiece spindle - Tailstock - Measuring device in the work area - Coolant supply - Clamping and holding devices - Separate control cabinet - Bellows covers - Operating and adjustment devices Note: The information is based on the available nameplates and the visible machine components. Year of manufacture, center distance, center height, travel distances, machine weight, and functional condition are not confirmed. Subject to errors, changes, and prior sale.

Condition: used, Year of construction: 2007, grinding wheel diameter: 400 mm, table load: 800 kg, grinding wheel width: 100 mm, overall weight: 5,700 kg, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, Horizontal Surface Grinding Machine Manufacturer: ABA Z&B Model: ECOLINE 806 E Year of manufacture: 2007 Control system: SIEMENS 840D powerline Technical details: Spindle motor: 11 kW Grinding wheel diameter: 400 mm Chedpfxjzy Sins Abred Grinding wheel width: 100 mm Max. table load: approx. 800 kg X-axis: 800 mm Y-axis: 700 mm Z-axis: 600 mm Machine weight approx.: 5,700 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and workholding devices shown are included in the scope of delivery only if specified in the additional information. Subject to changes and errors in technical data and specifications, as well as prior sale!

Condition: used, Year of construction: 1960, functionality: fully functional, x-travel 500 mm breite 450 mm serial number 386 weight of the machine ca. 1,8 t Chedpfxezkbqie Abrsd

Condition: good (used), Year of construction: 1989, grinding length: 400 mm, grinding width: 200 mm, Grinding area: 400 x 200 mm Magnetic area: 400 x 175 mm Vertical adjustment: 410 mm Grinding wheel dimensions: 225 x 25 x 50.8 mm Grinding wheel speed: 1420 / 2840 rpm Complete with: - Coolant system - Hydraulic unit Chedpfx Abov Tcy Uored - Documentation Country of origin: Germany Motor power: 1.5 kW Machine dimensions (L x W x H): 2200 x 1500 x 2100 mm Machine weight: 1100 kg

Condition: ready for operation (used), functionality: fully functional, grinding length, max. 600 mm Table clamping surface 600 x 200 mm Magnet dimensions 500 x 200 mm Maximum distance between table surface and center of the grinding spindle 495 mm Grinding wheel dimensions (D x b x d) 250 x 25 x 51 mm Grinding spindle drive 5.5 kW Chodpfx Asz Ayqxobrjd

Condition: like new (used), Year of construction: 2016, Jung Supromatic JF 520 Jung Supromatic JF 520 Surface Grinding Machine, year of manufacture 2016, very good general overhauled original condition. The machine comes from the technical center of a renowned German mechanical engineering company. Technical Data: Year of manufacture: 2000 Technical Data: Clamping area (L x W in mm): 600 x 200 Grindable area (L x W in mm): 600 x 250 Max. magnet size mm: 500 x 200 Max. grinding wheel dimensions mm: 225 (250) x 25 x 51 Distance table/spindle center mm: Max. 400 Table longitudinal feed traverse m/min: 1 – 20 Creep feed mm/min: 0 – 500 Grinding spindle drive speed RPM: 800 – 4200 Power kW (with creep feed): 1.6 – 2.2 Machine weight approx.: 2.0 t Cjdpfx Aboy Naw Isrehd Accessories and Equipment: Magnet Coolant system Machine feet Grinding wheel About the machine: We are offering a Jung Supromatic JF 520 surface grinding machine, year of manufacture 2016, in very good condition. The machine is, of course, fully operational and has completed approx. 50 operating hours since overhaul. All slides move very smoothly and evenly. Even at high speeds, the Jung runs very quietly. This newer generation of surface grinding machines is very user-friendly and can achieve surfaces with a low Rz value. Take the opportunity to inspect this machine under power on site and see for yourself its condition. Scope of overhaul: Mechanical scope: Mechanical basic overhaul Hydraulics Feed Lubrication Cross and vertical adjustment Grinding spindle Dresser Painting to new-machinery quality Geometric scope: Guideway grinding at the manufacturer’s facility (optional) Scraping of the guideways Column pull, measurement, possible re-scraping/grinding, adjusting with pressure stones, check and pattern guideways Setting of cross-grinding on spindle head Aligning the dresser Regrinding the table and magnet Machine acceptance to manufacturer's inspection checklist Electrical scope: Renewal of complete electrics, all limit switches and buttons Conversion of X-axis from cam switch to contactless limit switches New control cabinet RSF position display (2- or 3-axis readout) Holding force regulation for 24V or EP-magnetic chuck Control system modernization New auxiliary control cabinet (control panel top right) Thyristor control for grinding spindle drive Manual cylindrical dressing with head or side dresser (for Diaform operation)

Condition: used, ABA MULTILINE 1507 A is a profile grinding machine engineered for precision, high accuracy and reliable operation. Capacities: table 2000x600 mm, grinding area 1500x600 mm, table load max 2500 kg, table‑to‑spindle centre 900 mm; travels X1500, Z750, Y900 mm. Specs: stepless feeds X 2000–35000, Z 5–5000, Y 1–3000 mm/min; wheel speeds 50–2500 t/min; wheel Ø400x60 mm, bore 127 mm; spindle motor 26 kW; supply 3x400V 50Hz; total power 35 kW; weight ≈11000 kg; size 6465x3770x3000 mm. Accessories: paper filtration, magnetic plate 1500x700 mm, lamp, switch‑cabinet air conditioner. Achieves tight tolerances; ideal for automotive, watchmaking, machine tools, aerospace, medical. Chsdpfx Ajyxn Iaobred

Condition: used, Technical Data Manufacturer: Technica Model: 5100 Design: Centre grinding machine with vertical construction Workpiece holding: Between centres with tailstock and guide Grinding spindle: High-speed grinding spindle Equipment: Various grinding wheels and live centres included Chedpfjyw Rr Eex Abrjd Maximum workpiece length: 1100 mm Minimum workpiece length: 50 mm Maximum workpiece diameter: 125 mm Minimum workpiece diameter: 8 mm Centre height above guide: 145 mm Centre height above carriage: 65 mm Centre hole taper angle: 60° Maximum centre hole diameter: 50 mm Minimum core hole diameter: 2 mm Weight: 460 kg Dimensions: 850 x 750 x 1850 mm Condition: Used, good No guarantee is given for the correctness, completeness, and up-to-dateness of the information provided.

Condition: as good as new (ex-display), Year of construction: 2025, Boschert Tool Grinding Machine EASY SHARP Equipped for Trumpf tool system (Amada system optional) Machine for maintaining stamping tools, with a cooling system and a particularly powerful motor, making it also suitable for use with diamond grinding wheels. Demonstration unit for Trumpf tool system up to size III Accessories: Csdpfx Asdnn Ewebrehd Tool holder for flat punches and Whisper punches Die holders for sizes I, II, and III Dressing diamond Cooling system and machine base Technical data: Grinding wheel diameter 175 mm Vertical adjustment 150 mm Working area 400 x 150 mm Motor power 2.2 kW Motor speed 2825 rpm Adapter for Amada system also available as an option.