Used Crankshaft Grinding Machine for sale (83,557)

Condition: used, Year of construction: 2005, Distance between centers 3050 mm Center height 280 mm Travel paths: Z-axis 2800 mm X-axis 400 mm U-axis 160 mm W-axis 160 mm Max. workpiece weight 1000 kg Grinding wheel: Outer diameter (new) 1050 mm Max. width 120 mm Bore 304.8 mm Grinding wheel peripheral speed 6-50 RPM Gtedewz Rg Depfx Abdst Accessories: - Measuring system - Tailstock - Coolant system - Documentation

Condition: used, In our opinion, the machine is in good used condition and can be inspected under power by appointment. Gjdpfx Asx Ik Tkjbdjtt There are 2 machines available. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Year of construction: 2001, machine/vehicle number: 467-72, grinding wheel diameter: 400 mm, Landis 3L2 Twin Orbital Pin 180 x 630 CNC Pin Grinder Godpfx Abjxxybpedett crankshaft length 630 x dia 180mm, 2 grinding spindles (grinding wheel dia 400mm), MARPOSS E82 In-Process grinding wheel balancing system, CNC LANDIS 6400, weight, ca. 16to

Condition: excellent (used), Machine fully operational, everything complete. Gedsx Ezlrepfx Abdott

Condition: good (used), Year 1998 Grinding machine for machining centric or eccentric bearing diameters (also cones) of crankshafts or shaft-like components Gedpfx Abst Uufbjdstt Control Fanuc Panel i Version with 2 grinding spindles on one tool carrier Use of CBN grinding wheels (nominal Ø400 + Ø450mm - Junker standard bore ring Ø127) with machining with oil Clamping with one-sided chuck and tailstock as counterholder - Grinding range ~500mm Automatic loading hatch from above with loader interface The machine is currently still in series production and can be inspected under power Components can be retrofitted after consultation for an additional charge with documentation of change parts and tools Fuse for control system and drives included - free location Availability after consultation, warranty excluded Year of Production:1998 Grinding machine for producing of centrical or excentrical Journal diameters (as well as cones) on crankshaft and other shaft components Machine Control Fanuc Panel i Machine set-up with 2 spindles on 1 tool console Usage of CBN Grinding wheels (nomnial Ø400+Ø450mm - Junkernormbohrungsring Ø127) with Oil as coolant set-up with jaws on drive side and centers as tailstock - grinding length ~500mm automatic Gantry door for overhead loading and corresponding interface Machines are actually in serial production and can be inspected upon request front glass of Monitor damaged, screen itslef seems unharmed on first glance safeguarding of control and drives included - free location availability on agreement, no warranty possible

Condition: excellent (used), Year of construction: 2013, operating hours: 2,730 h, functionality: fully functional, workpiece weight (max.): 150 kg, clamping length: 1,700 mm, grinding wheel diameter: 660 mm, center height: 270 mm, grinding length: 1,500 mm, 1 pc. used crankshaft & camshaft cylindrical grinding machine Brand: BERCO Model: LYNX 2000 Year of manufacture: 2013 Technical Data Max. grinding diameter (plunge grinding): 220 mm Max. grinding diameter (cylindrical grinding): 300 mm Max. workpiece weight between centers: 150 kg Center height above table: 270 mm Distance between centers: 1,700 mm Max. grinding length: 1,500 mm Chuck diameter: 180 mm Tailstock quill travel: 50 mm Max. grinding wheel diameter: 660 mm Min./max. grinding wheel width: 20 / 80 mm Max. circumferential speed: 35 / 80 m/sec Grinding spindle head (X-axis) Axis drive with linear motor - travel: 490 mm Measuring system: optical scale, resolution 0.0001 mm Gtjdpsu R Nvujfx Abdet Workpiece headstock (C-axis) Workpiece spindle speed range: 1 - 1,000 rpm Encoder measuring range - resolution: 0.0001 degrees Table (Z-axis) Axis drive with linear motor Measuring system: optical scale - resolution 0.0001 mm Machine dimensions (L x W x H): 5,500 x 2,600 x 2,000 mm Space requirement: approx. 7,500 x 5,000 mm Machine weight: 9,850 kg Accessories: CNC control Siemens 840 D Oil cooler Coolant system with treatment unit

Condition: used, machine/vehicle number: 20308, gr. swing Ø: 600 mm Centre distance: 2200 mm gr. grinding-Ø with grinding wheel 800 mm Ø: 125 mm Godpfx Abscik N Sedett grinding wheel Ø when using the setting sticks: 20 - 125 mm grinding wheel dimensions: 800 x 28 - 800 x 42 x 305 mm 2 grinding wheel speeds 3 workpiece speeds: 32, 55 and 96 rpm table shift by hand coarse/fine: 10/2 mm automatic. Feed speed of grinding wheel: 0,005 - 0,025 mm 6 table speeds: 120 - 1540 mm/min Grinding headstock drive: 8 kW electrical connection: 380/400 V, 10 kW space requirement : 6100 x 2300 x 1600 mm weight : 7 t

Condition: good (used), Weipert Crankshaft Grinding Machine Grinding Bench Weipert Grinding bench Centering point: Röhm 110 H MK5 machine length: 5900 mm Gtedpeihfr Isfx Abdot More grinding machines in other sizes - new and used - you will find in our store! International shipping costs on request!

Condition: used, Year of construction: 2004, machine/vehicle number: 467-76, grinding wheel diameter: 400 mm, Landis 3L2 Twin Orbital Pin 180 x 680 CNC Pin Grinder crankshaft length 630 x dia 180mm, 2 grinding spindles (grinding wheel dia 400mm), MARPOSS E82 In-Process grinding wheel balancing system, CNC LANDIS 6400, weight, ca. 16to Gjdoxxx Rpspfx Abdott

Condition: good (used), Year of construction: 2011, LANDIS LT-2 TWIN WHEEL CNC ORBITAL CRANK GRINDER Equipped with: Landis 6400 CNC Control Siemens TOUCH HMI Arobetech Steady Rest Marposs P7 Gage System Lateral Locator Twin CBN Grinding Wheels Rotary Dresser Gedpfertrxxjx Abdstt Headstock Tailstock Rittal AC Units Specifications: Maximum Center Distance: 680 mm

Condition: good (used), Year 1998 Gtsdpfxot Uuf Ue Abdjt Grinding machine for machining centric or eccentric bearing diameters (also cones) of crankshafts or shaft-like components Control Fanuc Panel i Version with 2 grinding spindles on one tool carrier Use of CBN grinding wheels (nominal Ø400 + Ø450mm - Junker standard bore ring Ø127) with machining with oil Clamping with one-sided chuck and tailstock as counterholder - Grinding range ~500mm Automatic loading hatch from above with loader interface The machine is currently still in series production and can be inspected under power Components can be retrofitted after consultation for an additional charge with documentation of change parts and tools Fuse for control system and drives included - free location Availability after consultation, warranty excluded Year of Production:1998 Grinding machine for producing of centrical or excentrical Journal diameters (as well as cones) on crankshaft and other shaft components Machine Control Fanuc Panel i Machine set-up with 2 spindles on 1 tool console Usage of CBN Grinding wheels (nomnial Ø400+Ø450mm - Junkernormbohrungsring Ø127) with Oil as coolant set-up with jaws on drive side and centers as tailstock - grinding length ~500mm automatic Gantry door for overhead loading and corresponding interface Machines are actually in serial production and can be inspected upon request front glass of Monitor damaged, screen itslef seems unharmed on first glance safeguarding of control and drives included - free location availability on agreement, no warranty possible

Condition: good (used), Weipert crankshaft grinding machine Weipert Grinding bench Gedpoihfryjfx Abdjtt Centering point: Röhm 110 H MK5 machine length: 4300 mm More grinding machines in other sizes - new and used - you will find in our store! International shipping costs on request!

Year of construction: 1998, condition: good (used), CHEVALIER FSG 1640 AD SURFACE GRINDING MACHINE MAKE CHEVALIER, MADE IN TAIWAN MODEL FSG-1640 AD YEAR 1998 TABLE SIZE 1000 x 400 mm Gtodpfx Absirfpgjdjt GRINDING WHEEL SIZE 445 mm TRAVERSES 400 x 1000 mm MAX HEIGHT FROM TABLE TO SPINDLE CENTRE 445.0 mm TOTAL POWER REQUIRMENT 7.4 kW PLUS AUTOMATIC DOWN FEED WHEEL-MOUNTED WHEEL DRESSER SYSTEM HYDRAULIC MOVEMENT COOLANT SYSTEM 400.0 x 1000.0 mm ELECTRO MAGNETIC CHUCK MACHINE MANUALS

Condition: good (used), Year of construction: 2015, operating hours: 250 h, functionality: fully functional, For Sale: Guideway Grinding Machine (Retrofitted from Metal Planing Machine) We offer a robust guideway grinding machine, which has been professionally converted from an original metal planing machine. The main advantage lies in its relatively compact footprint in relation to the workpiece capacity. Technical Specifications: • External dimensions (LxWxH): 4,800 x 2,500 x 2,000 mm • Required floor space: 4,800 x 3,500 x 2,700 mm (+ control cabinet, coolant tank, access) • Table size: 2,000 x 800 mm • Distance between columns: 1,000 mm • Travel paths (X/Y/Z): 2,000 / 1,000 / 600 mm Upgrades & Features: • New ball screw spindles and bearings Gtsdexx Uudepfx Abdot • 2 new motors + 2 overhauled motors • 3 new frequency inverters • New Siemens SINUMERIK 802C baseline CNC system • Large grinding spindle: 2,840 rpm – refurbished + new motor • Small grinding spindle: 18,000 rpm – refurbished • Including control cabinet, coolant tank with pump, and separate, wall-mounted inverter for small spindle Inspection and trial run possible by appointment. Please contact us for more information.

Condition: excellent (used), Year of construction: 2016, XYZ 1020 Surface Grinding Machine Mag’ Chuck 250 x 500mm Spindle Speeds 3000rpm Spindle Motor 2Hp Standard Grinding Wheel Dia. 180mm Standard Wheel Bore 31.75mm Max. Longitudinal Grinding Travel- 500mm Max. Cross Grinding Travel - 250mm Max. Distance from Table Surface to Spindle Centre - 500mm Max. Longitudinal Travel – 558mm Longitudinal Travel Speed Range 5-25m/min Cross Travel Increments 0.15 – 15mm Cross Feed per Handwheel Revolution 4mm Cross Feed per Handwheel Graduation – 0.02mm Down Feed Per Handwheel Revolution 2mm Down Feed Per Handwheel Graduation 0.01mm Gtjdpsx S Ru Aofx Abdst *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79111 Machine Serial Number: 1624045 Cost: £11,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 1988, operating hours: 1,000 h, functionality: limited functionality, machine/vehicle number: 99223, overall weight: 2,800 kg, Grinding Dia: min=0.8 to max 250 mm; Vertical stoke : 90 mm; Max. travel of the grinding head :300 mm Table size :320x600 mm; Max stroke of the table Tranversal 250 mm, Longitudinal 400 mm; Electric motor speed 80000 rpm, Pneumatic 180000 rpm. Dimensions 1585x1260x2665 mm, Weight: 2800 kg Gsdpfsxvccdox Abdstt

Condition: new, Year of construction: 2024, functionality: fully functional, This powerful machine to meet the requirements of larger woodworking companies, ensuring exceptional sharpening results. Equipped with an electronic tooth counter and an autonomous cooling system. The ZM150 offers precise sharpening while maintainingoptimal operating conditions. With two electric motors, including a 150mm CBNdisk for sharpening and a motor reduction group for precise blade movement,this sharpener delivers outstanding performance. Power supply voltage - 380-400V Gjdpfxjxiv Uge Abdstt Frequency - 50Hz Power - 0.20kVa Capacity - 65 teeth per min Blade width - 20 to 100 mm Tooth pitch - 6 -25mm Sharpening disc - Profiled 150mm CBN disc Weight - 115kg

Condition: new, Year of construction: 2025, A superfine ball mill is a type of milling machine that is used to grind materials into very fine particles. This type of ball mill has some distinctive features that make it especially suitable for processing even the hardest materials with low contamination and minimal wear. It is commonly used in various industries, including pharmaceuticals, minerals, pigments, and chemicals, for producing micro powder or nanoparticles. Here are some key features and considerations for a superfine ball mill for micro powder: 1. High Grinding Efficiency: Superfine ball mills are designed to achieve high grinding efficiency by utilizing grinding media with a relatively small size, leading to a large surface area for grinding. 2. Precision Control: These mills often come with advanced control systems to regulate parameters like rotation speed, temperature, and grinding time, allowing precise control over the particle size distribution. 3. Specialized Design: The mill is typically designed with features to minimize contamination, such as using materials resistant to wear and corrosion. Some mills also have cooling systems to prevent overheating during the milling process. Gtodpfx Abjq Nf Uwsdot 4. Variety of Materials: Superfine ball mills can handle a wide range of materials, including both brittle and fibrous substances. They are often used for milling hard materials that require fine grinding, such as ceramics, minerals, or pigments. 5. Size Reduction to Micro or Nano Level: The primary goal of a superfine ball mill is to reduce particle size to the micro or even nano level. This is achieved by the intense grinding action that occurs within the mill. 6. Classifier System: Some superfine ball mills incorporate a classifier system to control the particle size distribution more precisely. This allows for the separation of fine particles from coarser ones during the milling process. 7. Batch or Continuous Operation: Depending on the specific design, these mills can operate in either batch or continuous mode, offering flexibility based on the production requirements. 8. Safety Measures: Safety features may be included, such as monitoring and control systems to prevent overloading, overheating, or other potential issues during operation. When selecting a superfine ball mill for micro powder production, it's important to consider the specific requirements of your application, the characteristics of the materials you're working with, and the desired final particle size distribution. Always follow the manufacturer's guidelines for operation, maintenance, and safety to ensure optimal performance and longevity of the equipment.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: MGB1320E, center height: 180 mm, workpiece weight (max.): 100 kg, grinding length: 500 mm, grinding wheel diameter: 400 mm, total width: 14,150 mm, total length: 18,000 mm, total height: 14,750 mm, grinding diameter: 320 mm, workpiece length between centers: 350 mm, grinding wheel width: 50 mm, spindle speed (max.): 3,000 rpm, feed length X-axis: 500 mm, feed length Z-axis: 150 mm, feed rate X-axis: 10 m/min, feed rate Z-axis: 1 m/min, overall weight: 2,100 kg, workpiece spindle speed (max.): 400 rpm, Equipment: rotational speed infinitely variable, Beijing Second Machine Tool Gtodpfxstr Azke Abdot Beijing Second Semi-automatic High Speed Cylindrical Grinding Machine MBS1320E On-line production equipment; test machine available; roundness within 0.001 beier machine tool works co ltd Online production equipment machine testing available The roundness within 0.001

Condition: excellent (used), Year of construction: 1982, Model D.I. + M.I.A Max width of wheel 250mm/10" Gsdpfx Aew Svrrobdott Min width of wheel 30mm / 1 1/4" Wheel diameter 508mm Horsepower 30 HP Weight 5900kg Year 1982 Manuals & electrical diagrams included

Condition: good (used), functionality: fully functional, rotary table diameter: 650 mm, table diameter: 650 mm, Glauchau Horizontal Spindle Ring Grinder With 650mm dia. Magnetic Chuck Godpfsxxyvmsx Abdstt

Condition: good (used), Year of construction: 1990, Lumsden 92ML Rotary Surface Grinder Gtodpfx Absvwc I Hsdet 48" Magnetic Chuck Year 1990 - Latest ones made Segmental wheel diameter - 711mm / 28" Segments per set - 12 Table diameter and grinding capacity - 1219mm / 48" Max height of wheel to table - 572mm / 22.5" Min height of wheel to table - 114mm / 4.5" Max height of wheel to magnetic table - 457mm / 18" Spindle speed 550rpm Table speeds - 18 & 6 rpm Automatic feed 10 rates - 0.1 - 1.0mm/min (0.004 - 0.040 ins/min) Power elevation - 635mm/min (25ins/min) Spindle motor - 50-75hp at 960rpm Table motor - 6 /.5hp at 1440/480rpm Feed motor - 0.25hp at 1440rpm Elevation motor - 1hp at 720rpm Coolant pump motor - 1hp at 1440rpm Overall height of machine - 3048mm Floor space 4394 x 3353mm Weight approx 12,200kgs / 12ton

Condition: good (used), functionality: fully functional, grinding length: 600 mm, grinding width: 250 mm, Minini (Italian) Horizontal Spindle Surface Grinder Gtedpfx Aexxywksbdjt Capacity: 600 x 250mm With Magnetic Chuck

Condition: excellent (used), Jones & Shipman 624 Dominator CNC Surface Grinder Gjdou D H Uhjpfx Abdott Under power and working. Can be shown demonstrating at our premises in Burscough Fanuc Series 210i-M CNC Control Table Length 600mm x 200mm width Wheel diameter 250mm Wheel width 25mm Max wheel speed 3200rpm Spindle power 5.6kw

Condition: excellent (used), Grinding diameter capacity ~80 mm (Type 2H) Type 2HA variant ~120 mm Maximum in-feed grinding length ~200 mm Maximum through-feed grinding length ~300 mm (with normal guides) Grinding wheel diameter 400 mm Grinding wheel width 200 mm Grinding wheel bore 203.2 mm (8") Driving wheel diameter 254 mm Driving wheel width 200 mm Driving wheel bore 127 mm Godpfx Absxrvgzsdett Main drive motor 11 – 22 kW Driving wheel motor ~1.1 kW Driving wheel speed ~10 – 200 rpm (continuously variable) Machine weight ~3,000 kg Footprint / Dimensions ~2,400 × 1,550 mm Voltage 380 V / 50 Hz / 3-phase Extras & Features Hydraulic dressing and trueing devices for both grinding wheel and driving wheel Variable speed drive on the regulating/driving wheel Base flange, support bridge, shims, and additional accessories included in many units The “2HA” variant extends capacity to 120 mm diameter parts. We have two of these machines available.