Used Standing Seam for sale (6,951)

Condition: good (used), We are offering a second-grade post protector from the manufacturer SSI Schäfer for sale. The scope of delivery includes: 01x Post protector, second grade Material color: yellow Design: V Overall height: approx. 400 mm Overall width: approx. 112 mm Internal width: approx. 104 mm Overall depth: approx. 60 mm Leg dimensions: approx. 65 x 65 mm Material thickness: approx. 4 mm Grid/hole spacing: approx. 250 mm Number of holes: 04 pcs (02 pcs/side) Gedpshr U S Usfx Aqiska Hole diameter: approx. 9 mm 04x Hex head screw: M8 x 35 mm 04x Lock nut: M8 04x Washers: M8 General information about the item: This item is offered for pickup only. Any additional desired transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: used, functionality: limited functionality, Year of construction: 2020, operating hours: 3,621 h, load capacity: 1,200 kg, lifting height: 4,266 mm, free lift: 1,379 mm, fuel type: electric, mast type: triplex, construction height: 1,915 mm, drive type: Elektro, Reach truck Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: poor Battery voltage: 24V Godpfx Ajzqw Svoqioka Battery year of manufacture: 2023

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 8,468 h, load capacity: 1,400 kg, lifting height: 4,266 mm, free lift: 1,465 mm, fuel type: electric, mast type: triplex, construction height: 1,915 mm, drive type: Elektro, Pedestrian stacker Gkedpezqw Spefx Aqisa Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Battery Volt: 24V Initial stroke,

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 4,993 h, load capacity: 1,200 kg, lifting height: 4,266 mm, free lift: 1,379 mm, fuel type: electric, mast type: triplex, construction height: 1,915 mm, drive type: Elektro, Pedestrian stacker Mast type: Triplex Condition: Ready for use and fully functional Gkodpfxozqw Rxj Aqija Technical condition: good Battery Volt: 24V Initial stroke,

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 5,317 h, load capacity: 1,400 kg, lifting height: 5,466 mm, free lift: 1,795 mm, fuel type: electric, mast type: triplex, construction height: 2,315 mm, drive type: Elektro, Stand-on forklift Mast type: Triplex Technical condition: good Battery voltage: 24V Gkodpfx Ajzqh Uheqiea

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, CMS AURA automatic vertical dry seaming machine Gkodpfxjwd Ihqs Aqiea Max. working height: 2.700 mm Glas-Thickness: 4-22 mm Max. Glaslänge: 3.100 / 4.500 mm Stand-Alone or integrated into the ISO Line Very easy operation with nearly no maintainance.

Condition: used, machine/vehicle number: IC1452, load capacity: 2,000 kg, lifting height: 1,660 mm, fuel type: electric, mast type: other, 5246416 Gkedpoztiadjfx Aqija Serial Number: 90375221 Fault E0181

Condition: new, Year of construction: 2024, Pressing area: 3000 mm x 1800 mm Gedpfx Aexzfw Uoqiska Design: Freestanding Working area: 1460 mm x 2900 mm Number of manual hydraulic cylinders: 4 Pressing pressure per cylinder: 2000 kg Cylinder stroke: 70 mm Pressure clamps: 1 Machine length: 2900 mm Machine width: 900 mm Machine height: 2000 mm

Condition: new, Year of construction: 2026, functionality: fully functional, number of drawers: 30, warranty duration: 12 months, Our company (EXPOGLASS®) manufactures machines, glass racks for the glass industry. Our offer includes a 321 x 255 pull-out glass rack. New product on request. Technical data : Number of drawers - 30 Size of panes - 2550 X 3210 Gedpeh Uudvefx Aqijka for storage Load capacity of a single drawer - 1500 kg Loading space width - 80 mm Total storage width - 4460 mm Orientation (tilt side of drawers) - universal (depends on assembly) Number of positioning rollers per drawer - 8, bearing-mounted Construction - modular (combinable) Material of the front wheel of the drawer - floor friendly polyamide Rear wheel of drawer - steel - turned, bearing-mounted, with double flange, running on steel track We export our products all over the world.

Condition: excellent (used), - Model: SS064 - Serial number: 4900 - Lowering: manual or semi-automatic control - Belt width: 600 mm - Belt length: 1200 mm - 2 foldable belts - Forward / reverse control Gksdpfx Aswxwmfsqioa - Emergency stop - Mobile on wheels - Voltage: 400V

Condition: excellent (used), - Brand: SEEWER RONDO - Model: Motostar 3000 SFM859H - Serial number: B8161306 - Dimensions: 5900x1400x1600 mm - Roller diameter: 146 mm - Roller length: 850 mm - Roller opening: 0.5 – 65 mm - Roller speed: variable, 50–100 m/min. - Roller reduction: motorized, 30 automatic programs - Feed belt speed: 50 to 100% of roller speed - Discharge belt speed: 90 to 100% of roller speed Godpowxwl Iofx Aqioka - Guard opening: max. 125 mm - Material: stainless steel - Electric control system - Direction of rotation control - Automatic winder - Year of manufacture: 1998 - Made in Switzerland - Overhauled equipment: the equipment is prepared upon order; pick-up and return times are agreed at that moment (please request the price after overhaul)

Condition: excellent (used), - Serial number: A3075005 - Manual or semi-automatic lowering - Belt width 600 mm - Belt length 1200 mm Gksdpfx Aqowxwmlsiea - 2 folding belts - Forward / reverse control - Emergency stop - On mobile wheels - Voltage: 400V

Condition: good (used), functionality: fully functional, mileage: 149,000 km, power: 155 kW (210.74 HP), first registration: 04/2016, fuel type: diesel, maximum load weight: 2,090 kg, overall weight: 7,490 kg, axle configuration: 2 axles, wheelbase: 4,850 mm, axle spacing: 4,850 mm, fuel: diesel, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6c, suspension: steel-air, number of seats: 7, total length: 8,520 mm, total width: 2,550 mm, total height: 3,500 mm, permissible axle load (axle 1): 3,600 kg, permissible axle load (axle 2): 4,600 kg, loading space volume: 36 m³, loading space length: 6,100 mm, loading space width: 2,450 mm, loading space height: 2,350 mm, Equipment: ABS, AdBlue, air conditioning, airbag, cruise control, electric window regulation, electronic stability program (ESP), onboard computer, power assisted steering, soot filter, tachograph, tail-lift, trailer coupling, truck registration, Address: Street 9, no. 33-35, 12309 Berlin-Lichtenrade (see last picture) Roof damaged. Roof structure without crossbars, headliner sagging! Technically in good condition. Engine and transmission function properly. Sleeper cab with bed, or as a 6-seater. Gkodszkbk Aopfx Aqioa Leaf spring/air suspension. 2 x tow hitch. Automatic transmission. Air conditioning. Auxiliary heater. Electric windows. Electrically adjustable exterior mirrors. Driver's air-suspended seat. Delivery possible upon request.

Condition: used, This listing is for the Envair Technology B102 Microbiological Safety Cabinet + Mobile Stand The unit is in full working condition and is ready for immediate use Overview: Envair Technology Bio 2 Essential (B102 Series) Certifications & Intended Use Fully compliant with BS EN 12469:2000, ensuring reliable biosafety standards. Envair Technology Suitable for handling biological agents up to ACDP Hazard Group 3, provided proper laboratory siting. Ideal for cell culture and related work. Envair Technology Design & Construction Width: 1200 mm. External body: Constructed from white polyester-coated mild steel. Work zone: Lined in 304-grade stainless steel with side-glazed panels. Work surface: Removable and dished, crafted from 316-grade stainless steel. Envair Technology Airflow & Filtration Offers recirculating or ducted configurations. Gkodpfx Aqjxhfpkoiea Equipped with downflow HEPA filtration (Class H-14, ≥ 99.995% efficiency) according to EN 1822‑1 standards. Lighting & Fans Illuminated using low-energy LED lighting mounted external to the work area. Ventilation is powered by independent EC-type energy-efficient fans, both above and below the working zone. Envair Technology Control Interface Features an integrated positive-touch membrane control panel positioned above the work area, with animated display feedback. Envair Technology Compliance & Standards In addition to BS EN 12469:2000 and HEPA filter standards, the Bio 2 Essential cabinets also meet: IEC 61010‑1:2010 Air quality standards: ISO Class 5 (BS EN ISO 14644‑1:2015) and EU GMP Grade A.

Condition: used, Year of construction: 2015, Offer 26163 Technical data (approximate): - Maximum workpiece diameter: 80 mm - Overhang: 70 mm - Welding torch stand adjustable in X, Y, and Z - Stand travel via handwheel: 500 mm - Stand overhang: 70 mm - Distance between centers: 600 mm - Tailstock with pneumatic pressure spindle - 3-jaw chuck: 100 mm - Hand-held remote control - Connection cable - Pneumatic connection - Table frame: W 2000 x H 850 x D 700 mm - Footprint (approximate): W 1150 x H 650 x D 500 mm - Weight (approximate): 200 kg Godpjzg A Rijfx Aqieka

Condition: used, Elastomer Test Rig BIA Turnkey Test Systems Hexapod Item No.: PT-065 Name: Elastomer Test Rig Manufacturer: BIA Turnkey Test Systems Description: Test rig for determining and analyzing bearing characteristic curves and values at vehicle operating points bearing characteristic curves and values at operating points under specified temperatures bearing behavior under operating load (settlement behavior, characteristic curve changes) functional noise at operating points on elastomer bearings in the chassis/drive system Test specimens are mounted between an upper fixed platen and a lower mobile platen. The mobile platen is driven by a hydraulic hexapod. The fixed platform is attached to the test structure via a 6-axis force sensor. A linear actuator allows adjustment of the distance between the two plates, to accommodate a wide variety of test specimens and fixtures. Degrees of freedom Amplitude Velocity Frequency Dynamics Xs ±25 mm 1.5 m/s 85 Hz 25 kN Gedewhdnhjpfx Aqioka Ys ±25 mm 1.3 m/s 85 Hz 25 kN Zs ±25 mm 0.8 m/s 85 Hz 50 kN Mxs ±15° 340° / s 50 Hz 3.75 kNm Mys ±10° 360° / s 50 Hz 3.75 kNm Mzs ±25° 580° / s 50 Hz 3 kNm Hydraulic hexapod: The hydraulic hexapod consists of six hydrostatically mounted hydraulic cylinders. These have a cross-section of 12.53 cm². Each cylinder has two parallel servo valves (38 l/min). The six cylinders drive the mobile plate via six connecting rods. The connecting rods have a hydraulic ball joint at their base. The oil pressure for this hydrostatic bearing comes directly from the cylinder. Linear actuator: The distance between the upper and lower plates can be adjusted using a linear actuator. The actuator consists of an electric motor, a gearbox, and a screw-nut system. The linear actuator is equipped with an absolute encoder. This is attached to the input shaft of the gearbox. Hydraulic actuator: The hydraulic cylinders are equipped with magnetostrictive position sensors. Resolution: 0.0015% Linearity:

Condition: used, functionality: fully functional, Year of construction: 2021, overall weight: 310 kg, total height: 345 mm, total length: 270 mm, load capacity: 350 kg, We offer this used Schmalz SK-KZG-CON unit, type: pedestal-mounted jib crane, manufactured in 2021. Rated load capacity: 350.00 kg Self-weight: 310.55 kg Gedpfx Aezmtk Hjqieka Month and year of manufacture: 02/2021 If you have any questions or require further information, please do not hesitate to send us a message or contact us by phone.

Condition: used, Technical details: voltage: 220 V / Hz revolution per minute: nicht bekannt U/min weight: 59 kg dimensions L x W x H: ca. 0,38 x 0,44 x 1,2 m Double sanding bench, mounted table unit currently clamped sanding discs: right Ø 180 x 6mm and left Ø 120 x 25mm with sanding supports, right and left, adjustable by 50mm Grinding guard on both sides Gkedou Ngx Depfx Aqisa Grinding block mounted on stand, foot mounting possible *

Condition: used, Year of construction: 1986, Technical details: grinding wheel diameter: 200 mm voltage: 380 / 50 V / Hz revolution per minute: 3000 U/min height over floor: 1000 mm current type: 380 V total power requirement: 0,9 (900 Watt) kW weight: 52 kg dimensions L x W x H: ca. 0,4 x 0,56 x 1,2 m Double sanding block mounted on stand currently clamped grinding wheels 2x, Ø 80x x 30mm right and Ø 160 x 30mm left Gkodpou Ngxqofx Aqija Handrail, movable Grinding guard Holder for cooling water tank *

Condition: used, Technical details: grinding wheel diameter: 200 mm voltage: 220-380 - 50 V / Hz revolution per minute: 2750 U/min total power requirement: 900 Watt weight: 87 kg dimensions L x W x H: 0,32 x 0,56 x 1,0 m Gjdpfx Asu Ngwmeqijka Double sanding block with handrail, adjustable no grinding protection guard Use max. sanding discs Ø 200mm max. sanding disc thickness 32mm Grinding wheels currently clamped: left = Ø 180 x 24mm and right = Ø 150 x 31mm *

Condition: used, Technical details: grinding wheel diameter: 200 mm revolution per minute: 2750 U/min total power requirement: 700 Watt current: 220 / 380 A weight: 70 kg dimensions L x W x H: 0,4 x 0,46 x 1,22 m Gkodeu Ngviepfx Aqiea Double sanding block, table-top unit mounted on stand with handrail on both sides, adjustable/swiveling Sanding guard on both sides Use max. sanding discs Ø 200mm max. sanding disc thickness 30mm sanding disc currently clamped on sanding block: left=Ø 160 x 30mm and right=Ø 160 x 22.5mm Connections for dust extraction on both sides Ø 35mm *

Condition: used, Technical details: grinding wheel diameter: 200 mm voltage: 220 380 V / Hz revolution per minute: 3000 U/min total power requirement: 900 Watt weight: 22 kg dimensions L x W x H: 0,23 x 0,46 x 0,25 m Gksdpfeu Ngu Sox Aqioa Double sanding block; table-top unit with sanding supports left/right, horizontally adjustable 30mm max. sanding discs Ø 200mm max. grinding wheel thickness 32mm currently clamped sanding discs on the sanding block: left = Ø 190mm x 30mm type H50 and right = Ø 180mm x 32mm type M20 *

Condition: used, Year of construction: 1977, Technical details: grinding wheel diameter: 200 mm revolution per minute: 3000 U/min with handrail: verschiebbar 30mm current type: 220V / 380V total power requirement: 900 Watt weight: 149 kg dimensions L x W x H: 0,4 x 0,5 x 1,2 m Double grinding block Main switch - On/off switch Gkedpfxou Nguxs Aqija Connection for dust extraction Currently attached grinding wheels: Ø 140 x 25 and Ø 150 x 25 mm *

Condition: used, Year of construction: 2000, functionality: fully functional, 1x Used Bühler MDDL / MDDK Gsdpfxsyudt Nj Aqijka Rollers are worn and can be re-grooved at an additional cost. Complete mill is already dismantled. Includes 4 drive motors. Spare parts can be supplied at extra cost.

Condition: new, Year of construction: 2026, functionality: fully functional, PU4 4-in-1 Roller Support Stand The PU4 4-in-1 is a professional material support stand featuring a modular design that combines the functionality of four different support types in one device: a stationary support, a bearing-mounted roller support, a ball transfer support, and a V-shaped pipe support. It is a practical and versatile solution designed for workshops, manufacturing facilities, and machining workstations where stable material support during feeding and unloading is essential. Its robust construction, high load capacity, and adjustable height make the PU4 a reliable support system that improves operator efficiency when working with machine tools and cutting equipment. Key Features 4 functions in one unit – quick and easy interchangeable support heads Load capacity up to 200 kg – stable support for heavy workpieces Height adjustment from 785 to 1230 mm – suitable for various machine setups Heavy-duty base (600 × 700 mm) – ensures excellent stability and safety Bearing-mounted roller and ball transfer versions – facilitate smooth material movement and positioning V-shaped support – ideal for pipes, round bars, and box sections Design and Construction The PU4 support stand is built on a common 600 × 700 mm steel base made from heavy-duty structural steel, providing excellent rigidity and resistance to deformation. Thanks to the quick-change support heads, the unit can be easily configured as: a roller support for smooth material feeding, a ball transfer support for multi-directional positioning, a stationary support for stable material support, or a V-shaped support for cylindrical workpieces. Each configuration offers dedicated functionality depending on the type of material being processed. Precision and Productivity With an adjustable working height ranging from 785 mm to 1230 mm, the PU4 can be easily matched to various types of machinery, including: band saws, Gedpfx Aqovu R Rdsioka milling machines, lathes, and cut-off saws. The bearing-mounted roller and ball transfer heads significantly improve workplace ergonomics by reducing friction during material handling and making it easier to move large or heavy workpieces. This increases operator safety while minimizing the risk of handling errors. Applications The PU4 4-in-1 support stand is an ideal solution for: Manufacturing and metal fabrication workshops Woodworking and metalworking facilities Steel structure fabrication companies Users of band saws, milling machines, lathes, and cut-off machines Its versatility and quick configuration make it an essential accessory for any professional machining workstation. Standard Equipment Steel base with height adjustment Stationary support head for stable material support Bearing-mounted roller support head for smooth feeding of workpieces Ball transfer support head for multi-directional material movement V-shaped support head for pipes and cylindrical profiles Technical Specifications Support Head Type Load Capacity Stationary Support 200 kg Bearing-Mounted Roller Support 120 kg Ball Transfer Support 120 kg V-Shaped Support 200 kg Specification Value Base Dimensions 600 × 700 mm Height Adjustment 785–1230 mm