Used Steam Cleaning Systems for sale (37,481)

Year of construction: 2005, condition: ready for operation (used), Tank capacity: 775l, max. batch weight: 100kg, heating capacity: 26kW, max. temperature: 75°C, basket dimensions X/Y/Z: 660mm/480mm/338mm, fine filtration tank 1/2: 100µm/50µm. Machine dimensions X/Y/Z: approx. 1850mm/1400mm/1800mm, weight: approx. 950kg. The machine was overhauled in 2024 and has not been used since. Including basket rotation with swivel drive, automatic water filling and oil separation with coalescence separation unit and oil collection container. Documentation available. On-site inspection is possible. Hodpfxewr Dxho Aaajk

Condition: new, Year of construction: 2025, Technical data: ALKO clean air - mobile extraction unit, type Mobil-Power Unit APU 120, motor power 1.5 KW, intake Ø=120 mm, soundproofed, mobile dust garbage can 135 ltr, manual filter cleaning, dimensions: L= 1,085 mm, W= 650 mm, H= 1,985 mm, volume dust garbage can: 135 liters, weight: 117 kg, nominal volume flow (after cleaning): 814 m³ / h, Hodpfxjcdy Ndj Aaaok Exhibition piece At an absolute special price Location: From stock Bitburg

Condition: new, Year of construction: 2025, Exhibition piece- is sold at a special price Will be sold at a special price Technical data 300-P Intake manifold: 300 mm Nominal motor power: 7,5 kW / 3 Ph voltage: 400 V / 50 Hz max. volume flow: 6 000 m³ / h nominal volume flow: 5 089 m³ / h negative pressure: 2 280 Pa filter surface: 30 m² Hodpfscdy I Tox Aaajk Spa collection volume: 3 x 250 L Dimensions (L / W / H) in mm: 2963 x 994 x 2346 Weight: 880 kg Special: unit is equipped with sound absorber - therefore extremely quiet - can be sold with or without Location: Ex stock 54634 Bitburg

Condition: as good as new (ex-display), Year of construction: 2025, IE 3 engine as standard maximum flow rate up to 10,000 m³/h to the fan about 73 m m² filter area Pre-filter as standard Hedpfsdqzhhox Aaask 71 dB (A) at full load (according to DIN EN ISO 11201) Certified according to GS-HO-07 H3 residual dust content 0,1 mg / m ³ safely complied (wood dust) Models with construction pattern tested rotary valves (FSA) Approved non-return valve Built-in automatic fire extinguishing system 350 + P Intake manifold 355 mm Rated motor power 15.0 kW/3Ph Voltage 400 V / 50 Hz maximum volume current 10,000 m³/h Nominal flow rate * 7.127 m³/h Depression at Vnom. 3.347 PA Filter area 73 m² Chip collecting volume (net / gross) 3 x 165 L / 3 x 241 L Sound pressure level * 72 dB (A) Dimensions (L/W/H) in mm 3,112 x 1,058 x 2.361 Weight 1,074 kg

Condition: new, Year of construction: 2025, An all-round reliable, mobile family: AL-KO POWER UNIT® extraction systems are available for maximum volume flows between 790 and 10,000 m³. This makes the energy-efficient AL-KO POWER UNIT® models the perfect solution for small and medium extraction volumes or an ideal supplement to existing stationary systems. Your advantages: - IE 3 motor as standard - approx. 73 m² filter surface Hedpfx Ashkzt Nsaaok - Pre-separator as standard - Certified according to GS-HO-07 - H3 residual dust content 0.1 mg/m³ safely complied with (wood dust) - Optionally with type-tested rotary valve (FSA) - Tested backwater flap - Integrated automatic extinguishing system Technical data: - Nominal motor power: 11.0 kW /3 Ph - voltage: 400 V / 50 Hz - max. volume flow: up to 8,500 m³/h at the fan - nominal volume flow: 6.927 m3/h - Negative pressure at nominal V: 2,543 Pa - Intake connection: 350 mm - Noise level: 71 dB (A) at full load (according to DIN EN ISO 11201) - Chip collection volume (net/gross): 3 x 165 L / 3 x 250 - Dimensions (L x W x H) in mm: 3,130 x 1,058 x 2,361 - Net weight without packaging: 977 kg - Dust class H3 Location: ex stock 54634 Bitburg - immediately available - as in stock subject to prior sale

Condition: new, Year of construction: 2025, Compact design Highest reliability Hodshkzu Aspfx Aaaok High suction power Integrated pre-separator 100 % air recirculation Residual dust content < 0.1 mg/m³ Low noise emission Longer filter life Easy emptying Supplied ready to plug in With rotary valve Models with rotary valve: AL-KO POWER UNIT® 300 ZRS Intake port: 300 mm Nominal motor power: 7.5 kW / 3 Ph Voltage: 400 V / 50 Hz Maximum volume flow 4,900 m³ / h 6,000 m³ / h Nominal volume flow: 5.089 m³ / h Negative pressure: 2.280 Pa Filter area: 30 m² Filter cleaning: pneumatic Dimensions (L x W x H) in mm: 2,950 x 994 x 3,013 Cellular wheel capacity:15.816 L / h Weight:920 kg Location: ex stock 54634 Bitburg - immediately available - subject to prior sale

Condition: new, Year of construction: 2025, RLA 160 Holzkraft Clean Air Dust Extractor For wood dust and shavings, designed for commercial use Item number: 5131620 Brand: Holzkraft Swarf collection volume: 2 x 165 l Nominal diameter of the suction nozzle inlet: 160 mm Length: approx. 1755 mm Width/Depth: approx. 830 mm Height: approx. 1654 mm Weight: approx. 260 kg Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Filter Filter area: 9.21 m² Hsdpfx Ajhkztteaaek Noise emission Sound pressure level: max. 73 dB(A) Voltage: Nominal flow rate: 1448 m³/h Dust class: H3 Included: Metal fan impeller Inspection opening for cleaning the bypass filter 5 m connection cable with CEE plug 5-pole and phase inverter Two fixed and two swivel casters with parking brake Manual cleaning Item No. 5131620 Location: From stock, 54634 Bitburg - Available immediately -

Condition: new, SCHUKO Vacomat 140/160 XPe clean air extraction system - Exhibition unit - Filter generation motorized, mobile, extraction side right or left, can be remounted ----- Technical data ----- Test mark: H3 / BGHM HO 193023, Extraction nozzle Ø: 1 x 140 / 160 mm, Nominal volume flow: 1,447 m³/h, max. negative pressure: 2,200 Pa, Filter area: 9.5 m², Residual dust content: < 0.1 mg/m³, Number of bags: 1 piece, Motor: 2.2 kW, Dimensions (LxWxH): 1,665 x 900 x 1,980 mm, Hsdpsu R Szysfx Aaajk Weight: 306 kg, Dust class M: AWN 16 - new exhibition machine -

Condition: good (used), Year of construction: 1994, Heating system for hot water or steam Heating capacity: 6 MW Hedpfjyizqnsx Aaask Fuel: wood chips With oil burner as backup heating Dismantling must be carried out by the buyer

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, input voltage: 380 V, This is a cleaning/degreasing system with automatic loading. The components to be cleaned are automatically conveyed into the cleaning system in washing baskets (see photos). The system is fully functional and can be inspected during operation. Spare parts: The spare parts we have in stock for this system can be purchased additionally based on negotiation. Hedpjyb R Rhofx Aaask

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, IFP - KP50HYBRID Metal Degreasing and Cleaning System HYBRID Technology: Solvent-based and aqueous component cleaning in a single system. Demonstration unit, year of manufacture: 2024 Condition: As new Technical specifications: • Usable solvents/cleaners: modified alcohol (Alll) + water with detergent • Basket dimensions (L x W x H): 480 x 320 x 200 mm • Maximum basket weight: 50 kg • Throughput: 3 - 8 batches/hour • Connected load: 30 kW • Energy consumption: 15 kWh • Compressed air: 6 bar • System dimensions (L x W x H): 3000 x 2000 x 3000 mm • System weight: 4,100 kg • System cooling: Air/water-cooled (customer-side chilled water supply required) System features: • Fully enclosed system design Hsdpjx Ivtpefx Aaask • Service doors • Rotating and swiveling device • Front loading with safety glass door • 2 buffer tanks for solvent • 2 buffer tanks for water • Ultrasonic cleaning equipment • Process filtration • Fine filtration • Intensive vacuum drying • 12'' touch panel • Sliding table with two basket stations • Preservation unit • Online access for remote maintenance

Year of construction: 2015, condition: like new (used), AUTOMATIC CLEANING, POLISHING AND DRYING SYSTEM The system was only used for testing purposes and consists of: 1 piece heated oil removal centrifuge 2 pieces circular vibrators for cleaning/polishing Hsdpfx Aaoxxbcusaok 2 pieces swiveling, heated drying centrifuges Furthermore, it is possible to run 4 different media via the heated stainless steel tanks. The tanks, piping, and centrifuges are made entirely of stainless steel and are therefore especially suitable for acidic cleaning or pickling of components. Disassembly will cost approximately €20,000–30,000, but it can also be carried out by the buyer.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, total length: 1,820 mm, total width: 1,400 mm, total height: 1,800 mm, overall weight: 950 kg, input voltage: 400 V, input frequency: 50 Hz, load capacity: 100 kg, Equipment: documentation/manual, For sale: MAFAC Elba as a 2-bath cleaning system, year 2019, with approx. 2,500 cleaning cycles in very good condition. (Sale exclusively within Austria) Equipment: - Rotating warm air impulse blower - Stationary hot air drying system - Main stream fine filtration MT 1 - Main stream fine filtration MT 2 - Variable speed control of basket rotation - Control cabinet with top lighting - Leveling kit - Timer - Safety grid MW 20 - Chemical dosing proportional to fresh water (2 units) Hsdpfowyc Siex Aaajk - Suitable for Euro-standard baskets: 600 L x 400 W x 288 H mm

Year of construction: 2005, condition: ready for operation (used), functionality: fully functional, empty load weight: 1,500 kg, workpiece weight (max.): 750 kg, machine/vehicle number: F101, TECHNICAL DETAILS Pump output: 5.5 kW Heating element output: 4.2 kW Rotary basket load capacity: max. 750 kg Compressed air connection: max. 10 bar MACHINE DETAILS Hsdpfx Aaoxztt Dsaek Unladen weight: approx. 1,500 kg Electrical connection Connection: 400 V Current consumption: 63 A Frequency: 50 Hz

Condition: ready for operation (used), functionality: fully functional, Ultrasonic Cleaner Paint Stripping Installation RAX-8 The solvent cleaning machine consists of 2 parts: 1) The ASD; a 4-tank ultrasonic cleaning and degreasing system 2) The distillation column (still); a closed boiling tank with a vapor zone above it, including condensation and cooling coils. The condensate is continuously returned to tank 1 via a water separation system, and the contaminated BEVO thinner from tank 3 is automatically pumped out. Tank contents: Tank 1: 40.5 liter immersion tank temperature: 76°C-79°C Tank 2: 75 liter immersion tank temperature: 22°C-30°C Tank 3: 40.5 liter immersion tank (vapor tank) temperature: 77°C-82°C Hjdpow Ewl Usfx Aaaok Tank 4 empty (evaporation/cooling) temperature: ambient temperature Distillation column max 60 liters temperature: 76°C-82°C The machine has been professionally connected by a certified electrician.

Condition: good (used), Year of construction: 2000, Leutenegger (Starrag) Wash Box Technical Specifications Hsdpfjd Ncihsx Aaask Year of Construction: 2000 Bath Volume: approx. 0.9 m³ Chemicals: Henkel P 3 Voltage: 3x400V/230V 50 Hz Supply Cable: 40 A Control Voltage: 24 V DC Maximum Temperature: 50° C Electric Heating Heating Output: 3x3.25 kW = 9.75 kW Working Pump: 3 kW Exhaust Fan: 0.37 kW Exhaust Air Flow: 400 m³/h Shipping Costs Upon Request Find more items - new and used - in our shop! International shipping costs upon request!

Condition: good (used), Zippel crankshaft cleaning system Zippel Crankshaft cleaning machine Hjdpfxjihfn Ij Aaaek L x W x H = 3520 x 520 x 700 mm Further cleaning machines in other sizes - new and used - you will find in our store! International shipping costs on request!

Condition: new, connected load frequency 230 V battery 24V / 100Ah Brush diameter 510 mm turning speeds 175 U/min 0 Luft 24 L / s tank capacity 50 / 50 Liter weight 160 kg range L-W-H 1,1 x 0,52 x 1,0 mm Hsdpfevu Hccox Aaask KREMER floor cleaning machine: Packed with battery and charger Theoretical surface cleaning: Output: 2000 m²/h Suction width: 850 mm Cleaning width: 510 mm Max. working area incline: 2% Fresh/waste water tank volume: 50/ 50 L

Condition: new, internal dimension 550 x 730 x 400 mm 0 185 l operating pressure 5-8 bar weight 50 kg dimensions 0,7 x 0,6 x 1,35 m Specification: Large lockable flap. Comfortable gloves. Multifunctional cleaning sprayer. LED lighting. Air blower. Readable pressure gauge. Adjustable air pressure regulator. Removable cleaning grid. Removable filter for dirt. Removable water collection tray. Internal dimensions (LxWxH) 550 x 730 x 400 mm Interior volume 185 l Operating pressure 5-8 bar Weight 50kg Dimensions L x W x H 0.7 x 0.6 x 1.35 m Hsdpoupxigofx Aaaok Since this parts cleaner has a thermostat that sets the degreaser to 50 Degrees Celsius can heat up, it is advisable to use this degreasing cabin To be used in combination with the Eurol cold degreaser HF Plus. This degreaser has a higher flash point than the usual cold degreasers.

Condition: used, Year of construction: 2003, functionality: fully functional, Used REK cleaning system Very little used Full vacuum technology 12 kW distillation unit with hot discharge technology, Basket size 530x320x200 mm The system has been technically tested by us for functionality. We can quickly provide training, commissioning, service, and spare parts. Hedpfxjvyp D Ts Aaajk We have over 25 years of experience with REK systems. System dimensions: 2700x2500x2600 mm

Year of construction: 2025, condition: new, Laser cleaning device for derusting, descaling and cleaning of materials and components. These are absolute professional devices. Ideal for vintage car restorations and in the automotive and metal and plastics industry. We are happy to help you find a solution and can test your project here in the factory. The handling of the machines is easy to learn. Hedpfx Asiq I Nlsaask

Year of construction: 2025, condition: new, Laser cleaning device for derusting, descaling, and cleaning of materials and components. These are absolute professional-grade machines. Ideal for classic car restorations as well as use in the automotive, metal, and plastics industries. We are happy to assist you in finding the right solution and can test your application here at our factory. The operation of these machines is easy to learn. Hodpswzv Duefx Aaaok

Condition: new, Year of construction: 2025, Manual operation with our ultrasonic cleaning technology, analogue control panel and temperature control via a digital thermostat Optional functions can be added to the PRO series. We have volumes from 60 to 7,500 L to meet all requirements. Tank capacity: 110L Außenmasse:1970x670x970mm Useful dimensions grate:550x350x250mm Hedpfx Aaef Hqavoask Ultrasonic frequency: 40kHz Ultrasonic power:1000W

Year of construction: 2026, condition: as good as new (ex-display), AVAILABLE IMMEDIATELY!!!! Manual cleaning is carried out using special gloves in the front section. The effectiveness of the cleaning is ensured by a high-pressure pump and a special spray nozzle. A temperature of up to 60 °C can be set for the cleaning fluid in these devices. The pressure can be set from 1- 80 bar. Technical data: Work surface: 950 x 700 mm Internal height: 450 mm Load capacity: 70 kg Optional up to 150 kg Spray pressure: 1-80 bar adjustable Tank volume: 75 liters / heating capacity 2kW Basic version: - Blow-off gun in the interior Hjdof A D Nmjpfx Aaaek - Frame, feet, cover and housing made of stainless steel - Removable stainless steel plates above the tank - Flap can be opened upwards with 2 handles and gloves - Tempered glass window - Door opening/closing system supported by gas struts - Door opening monitored by safety limit switch - Filter on the suction side of the pump (500 micron) - Foot switch for operating the cleaning pump - Interior lighting - Neoprene gloves L 600mm (chemical resistant)- Adjustable feet +/- 50 mm Optional: - Stainless steel cartridge filter with pump (10/25/50 micron) - External mini-pneumatic oil separator

Condition: new, Year of construction: 2023, Automate your cleaning process with Superior series machines: lifting device with support grid for effortless handling of parts, filter systems for dirt separation, exclusive oil separation system (OPS) and intuitive touch panel. Standard models available from 150 L to 8000 L TECHNICAL CHARACTERISTICS Exterior dimensions of the machine 2,140 x 1,540 x 1,720mm Interior dimensions of the vat 1,300 x 794 x 670mm Useful measurements of the parts grid 1,270 x 685 x 470mm Maximum load 400kg Height of the worktop 980mm Vat capacity L 692 Hsdpfxjf E Nt Dj Aaask Power of the ultrasonic generator 4,800W Ultrasonic work frequency kHz 28 Heating element kW 12