Used Stoning Machine for sale (65,495)

Condition: excellent (used), Year of construction: 2012, operating hours: 37,984 h, functionality: fully functional, machine/vehicle number: 30-2626/01WM4513c.132, total length: 6,698 mm, total width: 2,730 mm, total height: 3,008 mm, overall weight: 4,500 kg, input current: 95 A, feed length X-axis: 2,500 mm, feed length Y-axis: 1,300 mm, input frequency: 50 Hz, type of input current: three-phase, input voltage: 415 V, working height: 925 mm, power: 58 kW (78.86 HP), feed rate X-axis: 18 m/min, pressure: 8 bar, rotational speed (max.): 30 rpm, travel distance X-axis: 6,698 mm, year of last overhaul: 2025, operating pressure: 8 bar, final pressure: 8 bar, protection type (IP code): IP00, volume flow: 10 m³/h, type of cooling: air, number of rollers: 3, Equipment: rotational speed infinitely variable, We offer this very good BENTELER 30-2626 Benteler Glass wash, year of construction 2012. Operating voltage: 415 V Phases: 3 Frequency: 50 Hz Connected load: 50 kW Nominal current: 55 A Maximum current limited: 87 A Control voltage AC: 125 V Control voltage DC: 24 V Nwsdoz Rztvjpfx Abusn Year of manufacture: 2012 If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 255179729, travel distance X-axis: 1,050 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 880 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, nominal power (apparent): 74 kVA, torque: 525 Nm, controller manufacturer: Mazak, controller model: 640M, workpiece height (max.): 1,000 mm, workpiece diameter (max.): 1,050 mm, workpiece weight (max.): 1,500 kg, total height: 3,200 mm, total length: 6,400 mm, total width: 2,600 mm, table width: 630 mm, table length: 630 mm, table load: 1,500 kg, overall weight: 19,700 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 10,000 rpm, spindle nose: BT 50, number of spindles: 1, number of slots in tool magazine: 80, mount diameter: 50 mm, tool length: 500 mm, tool diameter: 420 mm, tool weight: 30,000 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, TECHNICAL DETAILS Operating condition Condition: fully functional Inspection: possible under power after prior arrangement Table and swivel axis Table design: swivel axis Division of swivel axis: 1/360° Machine dimensions Length: approx. 6,400 mm Width: approx. 2,600 mm Height: approx. 3,200 mm Coolant system Tank volume: approx. 800–900 l Tank length: 1,800 mm Tank width: 800 mm Tank height: 650 mm Pallets Nwjdpfoz R A Ibex Abuen Number of pallets: 2 pcs. Pallet dimensions: 630 × 630 mm EQUIPMENT Tool holders External coolant drum filter tank Renishaw MP10 measuring probe system Grid frame in front of the machine, partially mobile 2 pallets, 630 × 630 mm

Condition: ready for operation (used), functionality: fully functional, overall weight: 1,000 kg, spindle nose: R8, Bridgeport 2HP Milling Machine Vari speed Nwedpfxo Adrp To Abuen Spindle speeds 60-4200rpm Table size 42" x 9" Chrome bedways Powered Traverse X Axis 2 Axis DRO Led work light Coolant pump & system Spindle Taper R8 Reground table as photos Metric leadscrews Power 3phase 400v

Condition: new, Year of construction: 2025, Roll forming metal siding “double façade panel” machine SPM-2 Roll forming metal siding “double façade panel” machine SPM-2 is new design product of our company for façade and wall metal panels forming with the necessary configuration. These double façade panels are very popular in construction business of cladding residential buildings and industrial structures, for the construction of fences of various configurations, gazebos, roofing elements, etc. The SPM-2 metal siding production line is fully automatic and consists of a rolling part of the machine, an automation system and guillotine cutting shears at the machine exit. The line can have as additional parts a manual or automatic uncoiler for metal rolls, depending on the customer's needs. Nwedpexghngjfx Abusn As standard version, this metal siding double façade panels roll forming machine SPM-2 makes a flat panel profile, but with the additional equipment, it is possible to roll panels with a microwave or rib shape profile. To start rolling, it is necessary to install a roll of metal to the decoiler and to put the end of the strip to the first rolling rollers of the equipment and feed it into them. After step by step, to put the metal to the next rollers, adjusting it if necessary. When metal comes to the cutting device of machine you need to feed metal into cutting knives and to make “zero” cut. After such step, equipment can move to automatic operation mode. The control panel of machine has the ability to set the number of tasks and the length of products, single tasks or to work in multitasking mode. After setting up necessary parameters the machine will automatically roll the metal cladding wall panels and cut them into necessary sizes. Thus, the customer will receive final product as quickly as possible and with the highest possible result. The roll forming speed is adjustable and can be up to 10-15 meters per minute. The SPM-2 metal wall cladding panels production line has special tools for punching out fastening holes on the side of the panel. It makes possible for the customer to get more interesting solution options and to offer a wider range of products to the end user. The rolling part of the machine has 18 pairs of forming steps, ensuring high quality of final product. You can get machine with protective cover or without it as per your request preferences. Specifications Material width (mm) 416 The material thickness (mm) 0,4-0,5 Engine power (kW) 3 + 1,1 Rolling speed (m/min) 10-15

Condition: used, machine/vehicle number: 008507, X axis working area: 5020 mm Y axis working area: 1380 mm Working Table: Pod and Rail Main Electrospindle power: 15 KW Number of controlled axes: 3 axes Total number of tool changer positions: 16 Nwodpfszvwnbox Abujn

Condition: new, functionality: fully functional, color: other, Year of construction: 2026, Vertical Shaft Impact Crushers (VSI) stand out among rock crushing machines due to their high crushing efficiency and excellent particle shape production. Developed by CONSTMACH, these sand-making machines are used in the tertiary crushing stage to give cubic form to materials obtained from secondary crushers and to produce a high proportion of fine material. The system offers superior performance in processing all types of minerals and ores, as well as hard rocks such as basalt and granite. High-quality sand is produced from materials with a maximum feed size of 45 mm. Vertical shaft impact crushers allow you to easily obtain the desired product size for different material types thanks to their variable speed rotor system. It offers production capacity flexibility with a high reduction ratio, large feed hopper, and four different crushing chambers. In addition, high-chromium wheel shoes, anvils, and heavy-duty bearings ensure long life and low maintenance costs. The independent lubrication system and optional anvil replacement mechanism maximize uptime. Vertical Shaft Impact Crusher Technical Specifications Model: VSI-700-CR Maximum Feed Size: 35 mm Nwedpfxsxqf Urs Abuon Weight: 6,500 kg Motor Power: 110 kW Rotor Diameter: Ø700 mm Rotor Speed: 60–70 m/s Production Capacity: 60–100 t/h Model: VSI-800-CR Maximum Feed Size: 40 mm Weight: 12,000 kg Motor Power: 2 x 160 kW Rotor Diameter: Ø800 mm Rotor Speed: 45–60 m/s Production Capacity: 150–200 t/h Model: VSI-900-CR Maximum Feed Size: 45 mm Weight: 14,500 kg Motor Power: 2 x 185 kW Rotor Diameter: Ø900 mm Rotor Speed: 50–60 m/s Production Capacity: 200–250 t/h Model: VSI-1000-OR Maximum Feed Size: 90 mm Weight: 15,000 kg Motor Power: 2 x 200 kW Rotor Diameter: Ø975 mm Rotor Speed: 50–60 m/s Production Capacity: 250–300 t/h Why Choose CONSTMACH Vertical Shaft Impact Crushers? CONSTMACH is a globally preferred brand in the production of stone crushing machines and sand making machines with its engineering quality. Our vertical shaft impact crushers offer high performance, low operating costs, and long-lasting use. Our models, which can be customized to the production needs of each facility, provide the advantages of easy maintenance and high efficiency. CONSTMACH is always the right choice for businesses seeking quality, reliability, and sustainable production. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: like new (used), functionality: fully functional, Year of construction: 2022, operating hours: 296 h, control type: CNC control, The Jinan Bodor P3T series is one of the manufacturer's most sought-after, fully enclosed industrial workhorses equipped with an automatic pallet changer. In addition to sheet metal processing, this machine is also designed for the precision cutting of tubes and profiles (T-version), allowing the entire production range to be covered with a single system.Dual Function: Flatbed sheet metal cutting and automatic tube cutting module in a single system. Maximum Safety: Fully enclosed protective cabin with laser safety glass for the complete protection of operators and the environment.Minimal Downtime: Automatic pallet changer system that enables loading and unloading during the cutting process.Outstanding Dynamics: High positioning speed and acceleration for maximum productivity.Intelligent Control: Bodor PRO. Technical Specifications: - Laser Source Power: 3000 W (3 kW) - Sheet Dimensions (X x Y): 3000 mm x 1500 mm - Tube Length Capacity: 6000 mm (6U execution) - Chuckable Tube Diameter: Ø20 mm – Ø170 mm (and corresponding square and rectangular profiles) - Chuck System: Automatic pneumatic / electric self-centering chucks - Control Software: Bodor PROPositioning - Accuracy: ±0.03 mm - Cuttable Materials and Guideline Njdpeznwu Sjfx Abuewn - Maximum Thicknesses (3 kW): Carbon Steel / Mild Steel: max. 20 mm Stainless Steel: max. 10 mm Aluminum: max. 10 mm Brass / Copper: max. 6 mm Accessories and Scope of Delivery: - Factory industrial water chiller unit - Automatic voltage regulator / stabilizer - Extraction and dust filtration system - Automatic nozzle cleaner - Complete documentation and software licenses Condition and Inspection: - The machine has been continuously maintained and has a service history fully supervised by a specialized technician. It is currently in live production and can be inspected and tested under operating conditions by prior appointment. Subject to prior sale. Under power in Hungary.

Condition: used, Year of construction: 2021, turning diameter over bed 0800 mm turning diameter over slide rest 500 mm turning length 4000 mm spindle bore 105 mm spindle turning speed range 5,4 - 720 U/min workpiece weight 2500 kg bed width 600 mm spindle bore 105 mm longitudinal feeds: 0,05- 24,3 mm/U cross feed 0,05 - 12,15 mm/U rapid traverse 4 m/min main drive 11 kW total power requirement 14 kW weight of the machine ca. 8 t dimensions of the machine ca. 6,5 x 2,5 x 2 m Nwsdpoy Nd Sisfx Abujn With 4 position tool holder, face plate with safety cover, steady rest and DRO.

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 2,300 h, machine/vehicle number: 921R50022874, control type: CNC control, degree of automation: automatic, laser type: fiber laser, laser source manufacturer: MAX photonics, laser power: 2,000 W, pipe diameter (max.): 200 mm, pipe length (max.): 6,000 mm, working length: 6,000 mm, travel distance X-axis: 6,500 mm, travel distance Y-axis: 360 mm, feed rate X-axis: 120 m/min, cutting speed: 1,600 mm/min, positioning speed: 120 m/min, positioning accuracy: 0.03 mm, repeat accuracy: 0.03 mm, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, overall weight: 14,700 kg, total length: 12,500 mm, total width: 4,700 mm, total height: 2,600 mm, tube wall thickness (max.): 6 mm, Equipment: cooling unit, emergency stop, fume extraction, safety light barrier, Laser machine for sale, in very good condition. It has a new laser source that is only a few months old. The machine has few operating hours and has been regularly maintained and is in daily use. It is possible to inspect and test the machine immediately upon arrangement. NOTE: Capable of cutting round, square, rectangular, oval, D-shaped, and U-shaped tubes. Nwodozg D I Aopfx Abuon

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: J22143, total length: 5,200 mm, total height: 2,391 mm, type of input current: AC, outer diameter of label roll: 400 mm, inside diameter of label roll: 75 mm, overall weight: 800 kg, input voltage: 380 V, Performance specifications: Product: Minimum height 40mm Maximum height 330mm Maximum diameter 150mm Minimum diameter 15mm Nedpfezv S Rwsx Abujwn Labels: Maximum outer roll diameter 400mm Inner roll diameter 75mm Maximum label width 150mm Application speed min 70 ppm Conveyor speed max (infinitely adjustable) 27.5 m/min min 7.5 m/min Dimensions Overall height 2391mm Length 5200mm Power supply Electrical 380V AC (three-phase) 50/60Hz, 4kVA Pneumatic 0.06 m3/min Protection class IP20 Parameter control via Allen Bradley PanelView Plus 700 Condition: Functional, professionally dismantled Note! System is sold without the Cognex camera system Further information available upon request

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: M .415619, total length: 5,600 mm, total width: 1,300 mm, total height: 1,950 mm, overall weight: 1,500 kg, GPE/100-7″-UV Automatic machine for printing with registration on travel mugs Njdj Aazuqepfx Abujwn This machine is in excellent condition Also comes with a set of jigs to print the travel mug with an handle with the UV dryer Print cure instantly

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Specification: Vector Speed: X/Y= 50m/min Vector Speed: Z = 15m/min Workpiece length: min. 200 mm Workpiece length: max. 3050 mm Workpiece width: min. 70 mm Workpiece width: max. 850 mm Workpiece Thickness min: 8mm Workpiece Thickness max: 56mm Drill Block with 13 Vertical Spindles Drill Block with 4 Horizontal drills in the X Direction Nwedpfx Abj Acw Hneusn Drill Block with 2 Horizontal drills in the Y Direction Grooving Saw X Direction Plausibility Check 5Kw Tool Change Spindle 4 Position Tool Changer Energy Saving Mode 400V 50Hz CE Marked

Condition: used, machine/vehicle number: 008379, Squaring: First and Second Pass Max Panel Thickness: 35 mm Njdezvwp Eepfx Abuswn Max feed speed: 30 m/min Distance between dogs: 320 mm

Year of construction: 2022, condition: new, We are selling the gummy-making machine because we no longer use it. The machine has never been used and has been stored in our production facility for all these years. You can view it at our warehouse. If you are interested, please contact me. Nwodpfx Asz Rzknobusn

Condition: good (used), GUK FA 36/4 FL2-36 Folding Machine Machine in very good condition. Made in Germany. Ideal for the production of pharmaceutical leaflets. Njdjz S Uxujpfx Abuewn Equipment: – 4 parallel folding plates – „Hang-on” style delivery – Counter with batching function – Advanced high-pile feeder with an additional suction head – Rietschle compressor – Folding plates adjustable via dials – Soundproofing for all folding plates – Tool kit, additional components, and manual. Technical specifications: Max. format: 360 × 880 mm Min. format: 60 × 140 mm Very small fold size: approx. 18 mm Operating speed: 10,000 – 30,000 sheets/hour Power supply: 400V

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: 11520, input voltage: 400 V, total length: 7,500 mm, total width: 6,450 mm, total height: 2,300 mm, compressed air connection: 6 bar, type of input current: three-phase, year of last overhaul: 2022, overall weight: 3,800 kg, input current: 32 A, product height (max.): 280 mm, Equipment: documentation/manual, QUICK SALE WANTED K9 High-Speed Fully Automated Single-Colour Screen Printing Machine – Complete with K23 Scrambler, Hopper & Deco Inspection System For sale: K9 high-speed, fully automated screen printing machine, configured for single-colour printing. Designed for efficient production printing around cylindrical items, with applications including bottles, tubes and similar containers. Supplied complete with K23 scrambler and hopper for automated product feeding, plus a Deco camera inspection system to support print-quality monitoring during production. Printing capabilities: Item diameters: 20 mm to 130 mm Item lengths: 40 mm to 280 mm Single-colour printing High-speed automated operation; output depends on the item, artwork and machine setup K23 Scrambler & Hopper Provides product sorting and feeding to the printing machine, helping reduce manual handling and maintain a steady supply of items during production. Deco Camera Inspection System Included for inspection of printed decoration, helping operators monitor print consistency and identify quality issues during production. Service History Full service history prior to being placed into storage. Package includes: K9 fully automated single-colour screen printing machine K23 scrambler and hopper Deco camera inspection system Nedpj Aba Ilsfx Abuown

Condition: excellent (used), functionality: fully functional, total length: 2,285 mm, total width: 1,525 mm, total height: 2,135 mm, Butler Slotting Machine Nwedpjz S Nphjfx Abusn Model:8" Precision Table Area:508mm (Rotary) Throat:500mm Max Under Ram:400mm Stroke:203mm Dimensions: 2285 x 1525 x 2135mm

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, broaching length: 700 mm, Hahndorf Broaching Machine portable Model RME 700/T Slot Width upto approx - 12mm Pulling Force - 15kn=1,5t Broaching Needle Length - 700mm Broaching Speed - 4,25m/min Rapid return constant 4,25m/min Tool Clamping - Manual Total Length - 2000mm Total Width - 430mm Total Height - 740mm Nwjdpfo Afhnbox Abujn Weight - 110kg With Various Tooling Broaches & Sleeves as pictured. Easy to operate Portable Compact and lightweight design Ball screw drive Ground guide rails Efficient cutting speed Cost-effective procurement

Year of construction: 2015, condition: excellent (used), functionality: fully functional, 1 x Atwell Labellers Ltd wrap-around label applicator fitted with rotary collection table and Markem-Imaje thermal transfer printer. Previously used to apply labels to 25ml - 80ml bottles. Manufacturer of system - Atwell Labellers Ltd. Date of manufacture - 2015. Supplied with: 1 x Modular belt conveyor fitted with guide rails. Belt dimensions - 2500mm long x 150mm wide. Nwjds Aa Drlopfx Abujn 1 x EME Series 2000 labelling head. 1 x Markem-Imaje SmartDate X45 thermal transfer printer/touch-screen control panel. Date of manufacture - 2025. Printhead - 53mm. 1 x Rotary collection table. Diameter - 900mm. Voltage - 230 V / 50-60 hz / 1 phase. Overall dimensions - 2500mm long x 1600mm wide x 1550mm high.

Condition: used, Year of construction: 2024, Bavelloni VE350-8 Straight-Line Vertical Edging Machine. Serial No. 110000297 (2024). Country of Origin: Italy Please Note: Highest bid is subject to vendor approval Nwedpfx Abe Afxi Asuen Location: This lot is located in Burton-on-Trent, UK. A charge of £450 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: used, machine/vehicle number: 006279, X axis working area: 3100 mm Y axis working area: 1250 mm Nwedpjz S T T Rofx Abuen Working Table: Flat table Number of controlled axes: 3 axes Total number of drilling spindles: 11 Total number of tool changer positions: 8

Condition: good (used), Fetzel TLM 500 V4 Laminating Machine The machine is 100% functional and in perfect condition. This is an advanced, high-performance automated system, well-suited for commercial lamination services. Manufactured in Austria. Technical specifications: Max. sheet size: 520 mm x 720 mm Min. sheet size: 200 mm x 290 mm Min. paper weight: 120 gsm Max. paper weight: 400 gsm Operating temperature: 80–130°C Max. operating speed: 35 m/min Nodpfx Abez S Uyxeuswn Feeder stack height: 600 mm Weight: 700 kg Power supply: 380 V Installed power: 7 kW Requires an additional 6-bar air supply. Features a large-diameter, chrome-plated steel cylinder that ensures a stable temperature. Equipped with pneumatic pressure, sheet separation, and an automatic high-pile feeder. Sheet feeding accuracy: ±2.0 mm. The feeder unit can be moved aside, providing excellent access to the cylinders. Includes an expanding shaft for film rolls, mounted on a swing-out arm. Features a color touchscreen control panel for easy operation. Includes a sheet-straightening module.

Condition: used, Year of construction: 2008, 2008 DMG Sauer Lasertec 80 Fine Cutting Laser Processing Cell with Fanuc Robot M16IB 20 Handling System & DMG Siemens 840D Powerline CNC Control Cell Comprising Load/Unload Palletised Loading Robot. Chiller, Dust Extractor, Filtration & Rofin Cutting Laser System. Details: Sauer Lasertec 80 Laser Cutting Machine. Axis Travel: 'X' Travel Approx 800mm, 'Y' Travel Approx 500mm, 'Z' Travel Approx 700mm. Maximum Working Width Approx 500mm, Max Cutting length Approx 800mm. Fanuc 6-Axis Modular Robot M-16IB 20, 20kg Pay Load with Stand Alone R-30IA Control. Robot Arm Reach Approx 1,600mm. Rofin DC 015 Cutting Laser System with Stand Alone Control 4763 4763 (2008). KKT Kraus Stand Alone Chiller System KLC19 N-L (2011). Rittal Top Therm SK 3304100 Cooling Unit. Keller Dust Extraction Stand Alone Unit with Aktor-Sensor Bus-System Digital Control. Nwsdjz E Sabspfx Abuon Floor Space Required for Full Cell Approx 7,300mm x 5,000mm. Weight of Laser Processing Machine Approx 5,700kg. 3 Phase Power Supply, 415 Volt.Viewing Recommended.

Condition: used, Year of construction: 2007, 2007 Amada LC3015 XI NT, Co2 Laser Cutting Machine with CNC Control with Stacker, Donaldson Torit DCE Dust Collector & Riedel Chiller Nwjdjz E R Idopfx Abusn Comprising: Amada LC3015 XI NT Laser Cutting Machine. 'X' Axis 3,100mm x 'Y' Axis 1,550mm x 'Z' Axis 120mm. Sheet Size 3,000mm x 1,500mm, Max 20mm Thick. Max Weight 730kg. 40CFX, 4,000 Watt Co2 Laser Resonator. Automatic Pallet Changer. BWS Transformer. Operating Terminal Beiyer E700 Stand Alone Control. Riedel Stand Alone PC 1001.1MS5.1 Chiller (2007). LKI, AS LUL 300XI Automated Compact Storage, Loading & Unloading Tower System (S/No. 1294) (2006). Sheet Size Max 3,000mm x 1,500mm, Minimum 2,000mm x 1,000mm, Thickness Max/Min 20mm/0.5mm. Mitsubishi Q Series PLC. (2) Sick MSLE03-24011 Beam Sensors. Donaldson Torit DCE Stand Alone Dust Extractor with Donaldson TCB Total Control Board. Weight of Laser Cutting Machine Approx 10,500kg. Dimensions Approx 6,500mm x 3,200mm x 2,100mm. Weight of Stacker Approx 11,000kg. Dimensions Approx 4,450mm x 2,700mm x 4,860mm High. Dimensions of Dust Extractor Approx 1,500mm x 1,400mm x 3,200mm High. Dimensions of Chiller Approx 2,860mm x 1,130mm x 2,000mm High. Power Supply 415 Volt, 3 Phase. Viewing Recommended. Please Note Technical Details of Stacker Shown within the Pictures.

Condition: used, LVD PUMA LASER Model 3015 Fibre Cutting Machine, Year of Manufacture 2024. Model MFMC-12000 , Laser Power 12 KW. Nedpezwgg Nefx Abuswn