Used Streamfeeder Reliant 1500 for sale (4,369)

Condition: excellent (used), functionality: fully functional, load capacity: 1,500 kg, Equipment: foot remote control, 3-axis PEMA welding positioner APS 1500 - stepless height adjustment Hjdpfx Aajyupd Hoaek - includes hand-held remote control - maximum load 15,000 N (1,500 kg) - rotation speed 0.07 - 1.3 rpm - rotational torque 1,000 Nm - hydraulic tilting up to 135° - tilting torque 3,000 N - max welding current 700 A - plate diameter 700 mm - height 780 - 1,550 mm - dimensions 1,640 x 810 mm - power supply 3 x 400 V / CEE 16A - weight 730 kg

Condition: new, New refrigeration compressor (compressor) from the renowned manufacturer Copeland. Condition: New – warehouse stock (old stock), with no signs of operation. The compressor is factory-prepared, protected, and equipped with safety labels. Identification data (from nameplate): • Manufacturer: Copeland • Type: D3RS/1500/EWM7000 • Catalog number: 606.110.14 • Serial number: 356784 (BBC-YORK) • Design: semi-hermetic • Application: refrigeration / air conditioning system • Configuration: Block 1 • Start-up: U. Direct start (direct-on-line starting) Hsdpfx Aajyga Utsask • Equipment: Oil sump heater (Kurbelwannenheizung) Electrical data (from Copeland nameplate): • Power supply: 3~ 50 Hz • Speed: 1,450 rpm • Volumetric capacity: 49.90 m³/h • Voltage: 380–420 V (Y) • Starting current (LRA): 117–129 A • Max. operating current (MRA): 28.8 A • Max. working pressure H/L: 25 / 20.5 bar • Test pressure H/L: 27.5 / 22.6 bar • Degree of protection: IP54 • Year: 1996 Oil (recommended): • Mineral: Fuchs KM / Suniso 3 GS / Capella WF 32 / Shell 22-12 The compressor is ideal as a new replacement part, for modernization of refrigeration or air-conditioning installations. Sale as shown in the pictures.

Condition: refurbished (used), Year of construction: 2010, operating hours: 1,721 h, functionality: fully functional, first registration: 07/2010, fuel type: electric, Hako Jonas / Sweepmaster B 1500 RH Refurbished sweeper with new batteries, new drive wheel, 6-month warranty, and new DGUV V3 inspection including test report. Working width with side broom: 132 cm Main broom width: 92 cm Max. area performance: 7,300 sqm/h Hopper capacity: 240 L Drive type: Battery Battery V/Ah: (36V 240Ah) wet-cell Installed new parts / repairs carried out: - Fully overhauled sweeping unit including new PTO shafts, ball bearings, sealing strip, scraper bars, lifting cylinder, rust protection, etc. - Brand new trough battery (36V 450Ah) (Battery will be ordered new upon purchase and installed prior to delivery/collection) - All drive belts replaced - Collection hopper fully refurbished - New gas springs - New tension springs - New main broom - New side brushes - New driver's seat - All rubber strips replaced - New cassette filter - All fluids replaced - New oil filter Hedpfxsyccgkj Aaask - All electric motor carbon brushes replaced - New exhaust hose - New suction hose Additionally, we offer: Service, repair, and sales for all common Hako models.

Year of construction: 2017, condition: new, functionality: fully functional, machine/vehicle number: Powerbord SPL 1200mm width Laminating, Model Powerbond SPL 120 Working width: 1.2 m Heating tunnel width: 1.7 m Cooling section: 1 m Electric power supply: 400 V / 3 phase / 50 Hz L1, L2, L3, N, PE Hsdpfx Aasyl Ubfeajk Current at full load: 90 A Air supply: clean, dry air at 6 bar Number of heating modules: 24 including preheaters Number of heating zones: 6 Nominal power per module: 2.4 kW Total heating power: 58 kW Maximum temperature: 220 °C Maximum tunnel height: 150 mm Maximum pressure roller height: 25 mm Conveyor belt speed: 1–15 m/min PLC control system: Omron CJ2M Software serial number: OM1168 Airborne noise emission: < 70 dB(A) Dimensions (W x H x L): 1954 mm x 1480 mm x 3710 mm Weight: 2000 kg

Condition: excellent (used), Year of construction: 2000, Planetary mixer Oru 2250/1500 - year 2000 - 1.5cmb ready concrete - 75cbm/h - 5 aggregate bins with weighting belt - Siemens 7 control - construction of the mixer - skip - cement weight - water weight Hjdoyf Dywjpfx Aaajk - additive weight - 2 cement screws included

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, HESS RH 1500 2.1 SVA Year of manufacture: 2008 Start: 2009 Very good technical condition. Hodpfsyb Rvkex Aaask Operating until the end of January. In 2022 a new roller for the upper hopper was installed by Topwerk - Hess. Vibrating table completely overhauled Siemens S7 control 3 molds included Price 195000euro Machine is located in Slovenia

Condition: excellent (used), approx. 1500 m² 1-storey steel construction platformUsed goods, good condition, see picturesManufacturer STOWLength approx. 58.5 mWidth approx. 54.6 mHeight Lower edge 3.4 mHeight Upper edge 3.7 mUp load 500 kg/m²C-profiles and Sigma-profiles and Sigma-profiles fastenedwith screws and nutsRaster distances adjustable in lengthFloor structure is 38 mm chipboard, highly compacted, groove and tongue underside white, upper side grey coatedNegotiation price: Offer on request!Partial sale possible!disassembled and loadedWare in stock.transport costs possible on request.inspection possible at any time by appointment.further information on request.over 5000 linear metres of pallet racks from numerous manufacturers in stock. (Changes and mistakes in the technical data, data and prices as well as prior sale reserved! See our general terms and conditions, all prices excl. VAT ex stock) Purchase / sale We are looking for, or constantly offer numerous items from various areas broom-clean business clearance business closures quick - flexible - ready for action! We also clear and or dispose of for liquidators. Write to us with some keywords and we will get back to you as soon as possible. To get to our site, please click on our logo! Hsdpfx Aajd S S N Roaok

Condition: like new (used), 1500 m² storage platform Schäfer R3000 3-story used, top condition, as new, see pictures Ground floor storage platform steel construction, above 2 floor shelf system Schäfer Manufacturer SCHÄFER R3000 CAD planning and assembly 3-storey Partial sale possible Negotiation price: on request! Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. More info on request. Constantly over 5000 running meters of pallet racks from numerous manufacturers in stock. Hsdpfx Aajhzw Hieask (Changes and errors in the technical data, specifications and prices and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT ex stock) Purchase / Sale We are constantly looking for, or offer numerous items from various areas broom-clean business clearances company liquidations Fast- flexible - ready to hit! We also clear and dispose for liquidators. Write us with some keywords, we will contact you immediately. To get to our site, please click on our logo!

Condition: ready for operation (used), Year of construction: 2022, operating hours: 113 h, functionality: fully functional, machine/vehicle number: AL150210302, turning length: 336 mm, turning diameter: 440 mm, spindle bore: 61 mm, spindle speed (max.): 6,000 rpm, controller model: DMG MORI COMPACT LINE, No reserve price – guaranteed sale to the highest bidder! Only 113 operating hours! TECHNICAL DETAILS Turning length: 336 mm Turning diameter: 440 mm Maximum bar diameter: 52 mm Swing over bed: 620 mm Hedoytbqvopfx Aaask Swing over cross slide: 465 mm Spindle speed (max.): 6,000 rpm Number of spindle speed ranges: 1 step Spindle bore diameter: 61 mm Spindle bearing inner diameter: 100 mm Tool shank diameter for square tools: 20 mm Tool shank diameter for boring bars: 32 mm X-axis travel: 260 mm Z-axis travel: 375 mm X-axis rapid traverse rate: 30,000 mm/min Z-axis rapid traverse rate: 30,000 mm/min Number of tool magazine positions: 12 MACHINE DETAILS Control model: DMG MORI COMPACT LINE Frequency: 50 Hz Operating hours: 113 h EQUIPMENT Coolant system Chip conveyor

Condition: excellent (used), Year of construction: 2013, 2013 Huvema HU 460 x 1500 VAC Gap Bed Centre Lathe With Newall DP700 DRO Swing Over Bed Ø460mm. Swing Over Cross Slide Ø270mm. Swing In Gap Ø690mm. Distance Between Centres 1,500mm. Centre Height 230mm. Spindle Through Bore Ø80mm. Variable Speed Override (Digital Read Out) Speed Range 30-2,000rpm (Motor 7.5kW). Spindle Nose D1-8/CAMLOCK. Main Spindle Taper MT6. Cross Travel 285mm. Top Slide Travel 128mm. Longitudinal Feed 0.031-1.7mm/rev, Cross Feed Range 0.014-0.784mm/rev. Width Of Bed 300mm. Tailstock Quill Travel 130mm, Tailstock Taper MT4, Tailstock Quill 60mm. Threading Metric 0.1-14mm. Threading Inch 2-112tpi. QTC. Voltage 400V. S/No. 30617 1781 (2013). NOTE: Machine must be collected no later than 17 April 2026. The machine is decommissioned and can be loaded to a flatbed FOC. Hsdpfoywzndex Aaask With Coolant System, Leadscrew Cover, (1) Ø250mm 4 Jaw Chuck, (1) Ø200mm 3 Jaw Chuck, Backing Plate, 3 Point Steady, Travelling Steady, Work Light, Spindle Guard. Machine Dimensions L2,750 x W1,080 x 1,370mm. Weight 2,020kg.

Condition: excellent (used), color: blue, lifting height: 30,000 mm, Year of construction: 2019, operating hours: 981 h, Empty weight: 3.475 kg Make of engine: Honda Lifting capacity: 1.500 kg Technical condition: very good Visual appearance: very good Delivery terms: EXW Hodsyappyepfx Aaaek Transport dimensions (LxWxH): 9,312x2,372x2,505 Production country: BE Please contact Vink Machinery for more information = Additional options and accessories = - Hook blocks = Remarks = Bocker AHK 30/1500 KS • 2019 • 981 working hours • Gasoline drive • Remote control • Automatic outrigger • Variable outrigger • Wheel drive • 1500 kg lifting capacity • 30 meter hook height • 25 meter horizontal reach

Condition: used, tank capacity: 1,500 l, GENERAL Equipment: Crane lugs Design: Vertical Remarks: Armaflex insulation in partial areas of the cylinder; manhole approx. 325 x 420 mm; 3 flow breakers and 1 perforated pipe inside the vessel (see photos) Internal diameter: 1,100 mm Total height: 2,700 mm Insulation: available Max. overpressure: 6.0 bar Location: Bremen Nameplate: Volume: 1,500 litres Product-contacting material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 1,250 mm Last intended use: Biochemistry Hjdpfx Aoycixgeaaek VESSEL Mounting type: Feet Number of feet: 3 pieces INSULATION Insulation material: Armaflex Insulation thickness: 20 mm EQUIPMENT Manhole / dome: in the cylinder Outlet: Flange DN80 MATERIAL SPECIFICATION Feet material: Stainless steel

Condition: used, tank capacity: 1,500 l, GENERAL Design: upright Speed: 1,420 rpm Hjdpfx Aoyckwdjaaok External diameter: 1,250 mm Overall height: 2,200 mm Power: 1.50 kW Agitator type: propeller Number of agitators: 2 agitators Location: outdoor storage Volume: 1,500 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 1,250 mm TANK Bottom: Klöpper bottom Support type: lugs EQUIPMENT Outlet: 80 mm Note: slight residues AGITATOR Voltage: 220/380 Volt Agitator configuration: Agitator mounted eccentrically on welded traverse

Condition: excellent (used), mileage: 119,242 km, color: blue, lifting height: 32,000 mm, Year of construction: 2006, operating hours: 6,761 h, Drivetrain Drive: Wheel Weights Empty weight: 7.490 kg Functional Lifting capacity: 1.500 kg CE mark: yes Condition Technical condition: very good Visual appearance: very good Other information Delivery terms: EXW Latest inspection: 2024-05-10 Production country: DE Additional information Please contact Vink Machinery for more information = Additional options and accessories = - Hook blocks Hsdpfexlpuxsx Aaajk = Remarks = Bocker AK 32/1500 * 2006 * Diesel drive * 6761 km * 119,242 km * 32-meter working height * 26.5-meter horizontal reach * 1500 kg * Winch and remote control replaced in 2020 * 7490 kg net weight * Includes documents

Condition: good (used), Make: Keilinghaus Type: PLS 1500 HY Specifications Metric US Standard Max. blank / workpiece over bed 3000 Max. blank / workpiece in the gap 5000 Ø Centre height over bed 1500 mm Distance between centers 2600 mm Maximum sheet thickness 15 mm Stroke X-Axis 1000 mm Stroke Y-Axis 2800 mm Speedrange Hsdpfx Ajkvnnksaaek 240 Rpm Power 75 kW Spindle taper head stock DIN 55027 - Size 15 DIN / Camlock Stroke pinole quill 1200 mm Dimensions (Estimate) Length 10000 mm Width 8000 mm Height 4500 mm Weight 60000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2008, Used milling machine by Style Model: BT 1500 Max RPM: 6000 Hsdpfxsyu Ifpo Aaask Year of manufacture: 2008 4th axis Spindle coolant

Condition: ready for operation (used), Vibrating chute Jöst Brand: Jöst Dim: length 1500 mm - width 800 mm Driving: two pieces vibration motors of each 1,2 kW. On stock: 2 pieces Hodpfoywmucjx Aaaok

Condition: used, mileage: 315,000 km, power: 162 kW (220.26 HP), fuel type: diesel, axle configuration: 4x2, wheelbase: 5,550 mm, fuel: diesel, brakes: engine braking, color: white, emission class: euro6, suspension: steel-air, number of seats: 2, total length: 9,850 mm, total width: 2,550 mm, total height: 3,150 mm, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, power mirror, tail-lift, traction control, General information Number of doors: 2 Year of manufacture: 2020 Technical information Number of cylinders: 4 Engine capacity: 4.580 cc Front axle: Steering; Tyre profile left: 40%; Tyre profile right: 40% Rear axle: Double wheels; Tyre profile left inner: 80%; Tyre profile left outer: 80%; Tyre profile right outer: 80%; Tyre profile right outer: 80% Weights Empty weight: 6.815 kg Carrying capacity: 5.175 kg GVW: 11.990 kg Functional Tail lift: Palfinger, tail lift, 1499 kg = Additional options and accessories = - Binding rails 2 x Hjdpfx Aoyx Hd Hjaaok - Camera system - Heavy duty engine brake - Line assist - Lock diff - Outside temperature display - Radio - Rear air suspension - Reversing camera - Spare wheel - Suspension seat

Condition: used, MORI SEIKI SL-45MC-1500, 3-AXIS CNC LATHE MAKE MORI SEIKI, MADE IN JAPAN MODEL SL-45MC-1500 CONTROL FANUC 15T WITH FAPT, LED SCREEN CHUCK DIA 400mm SWING 670mm BETWEEN CENTRES 1700 mm SPINDLE BORE 120.0 mm SPINDLE SPEED 2,500 RPM, 4 SPEED GEARBOX TURRET 12 STATIONS, DRIVEN TURRET RAPIDS X: 12,000 mm/min Z: 15,000 mm/min TAILSTOCK INCLUDED, PROGRAMMABLE PLUS NEW “SCHUNK” SMW QUICK CHANGE CHUCK (WORTH 20,000 GBP) C-AXIS AND DRIVEN TOOLS Hodpeymmqbsfx Aaajk HYDRAULIC STEADY FULL SET OF MANUALS MIST COLLECTOR VERY GOOD RANGE OF TOOLING NEW SWARF CONVEYOR IN EXCELLENT WORKING ORDER

Condition: excellent (used), color: blue, lifting height: 30,000 mm, Year of construction: 2023, operating hours: 195 h, Drivetrain Drive: Wheel Make of engine: Honda Hedpfx Ajyvq Tyjaaek Weights Empty weight: 3.500 kg Functional Lifting capacity: 1.500 kg CE mark: yes Condition Technical condition: very good Visual appearance: very good Other information Front tyres / undercarriage remaining: 95 Rear tyres remaining : 95 Delivery terms: EXW Production country: DE Additional information Please contact Michael Overmeer for more information = Additional options and accessories = - Hook blocks = Remarks = Böcker AHK 30/1500 KS trailer crane construction year 2023 with only 195 hours. Machine is like new and has among other things: Honda petrol engine, remote controlled wheel drive, automatic leveling, hydraulically folding support legs, hydraulic jip. Changes and typographical errors reserved.

Condition: good (used), mileage: 1,890 km, color: red, lifting height: 30,000 mm, Year of construction: 2017, operating hours: 1,890 h, Drivetrain Drive: Wheel Make of engine: Honda Weights Empty weight: 1.500 kg Functional Lifting capacity: 1.500 kg CE mark: yes Maintenance, history and condition Number of owners: 1 Technical condition: good Visual appearance: good Other information Front tyres / undercarriage remaining: 80 Rear tyres remaining : 80 Delivery terms: EXW Hjdpeyaqdlofx Aaaok Production country: DE Additional information Please contact Michael Overmeer for more information = Additional options and accessories = - Hook blocks = Remarks = Böcker AHK 30/1500 KS trailer crane construction year 2017 with 1.890 hours from the first owner. Machine is in a nice condition and has among other things: Honda petrol engine, remote controlled wheel drive, automatic leveling, hydraulically folding support legs, hydraulic jip. Changes and typographical errors reserved.

Condition: excellent (used), color: blue, lifting height: 30,000 mm, Year of construction: 2019, operating hours: 1,667 h, Drivetrain Drive: Wheel Make of engine: Honda Weights Empty weight: 3.490 kg Functional Lifting capacity: 1.500 kg CE mark: yes Condition Technical condition: very good Hodpfx Aew Tykbjaask Visual appearance: very good Other information Delivery terms: EXW Production country: DE Additional information Please contact Vink Machinery for more information = Additional options and accessories = - Hook blocks = Remarks = Bocker AHK 30/1500 • 2019 • 1667 working hours • Gasoline drive • Remote control • Automatic outrigger • Variable outrigger • Wheel drive • 1500 kg lifting capacity • 30-meter hook height • 25-meter horizontal reach • The fuel engine and printed circuit board were replaced in March 2025

Condition: used, Year of construction: 2012, grinding diameter max. 320 mm grinding length 1.500 mm centre height 160 mm Control Touch Jones & Shipman between centers max. 100 kg Traverse Z-Axis 1.645 mm traversing speed m/min swivable +5 / -5 ° Traverse X-Axis 260 mm traversing speed - 6 m/min grinding wheel motor 7,5 kW cutting speed 45 m/s Grinding wheel Ø x width x bore 450 x 50 x 203,2 mm Swivel range -15 / +90 ° turning speed range 0 - 660 U/min Torque 27 Nm tool adaptor MK 3 weight of the machine ca. 8,5 t dimensions of the machine ca. 5,5 x 2,5 x 2,0 m Cylindrical Grinding Machine JONES & SHIPMAN - Suprema Easy 1500 E - Replacement grinding wheel flange - Multi-grain diamond (for circumferential and lateral dressing, 10mm, 1 carat) - Tailstock with micro adjustment (max. adjustment range +-0.05mm) - Pneumatic quill retraction Hjdpfx Aaotqmrpsask - Two-jaw bezel (range 8-75 mm)

Condition: good (used), Year of construction: 1999, Overhead crane, crane, electric hoist, manual trolley, trolley, crane trolley, crane trolley, crane trolley, trolley, girder trolley, monorail trolley, hoist -Manufacturer: Steel, crane chassis with electric cable winch -Cable pull: Type AS 2008-16 2/1 -Load capacity: 1500 kg Hjdpjq Tvpxsfx Aaajk -Travel speed: m/min -Roller spacing: 153 mm, dimensions see photos -Drum speed: 16.0 / 4.0 m/min -Lifting height: approx. 8.5 m -Transport dimensions: 1120/1020/H380 mm -Weight: 251 kg

Condition: good (used), Year of construction: 1999, Overhead crane, crane, electric hoist, manual trolley, trolley, crane trolley, crane trolley, crane trolley, trolley, girder trolley, monorail trolley, hoist -Manufacturer: Steel, crane chassis with electric cable winch -Cable pull: Type AS 2008-16 2/1 -Load capacity: 1500 kg -Roller spacing: 153 mm, dimensions see photos -Drum speed: 16.0 / 4.0 m/min Hedpfx Aotnlz Ujaask -Main stroke/fine stroke: 8.0/2.0 m/min -Lifting height: approx. 9.0 m -Drive unit: FU-A 11 43 22 -Travel speed: 20.0/5.0 m/min -Transport dimensions: 1120/1020/H380 mm -Weight: 226 kg