Used Infeed System for sale (41,675)

Year of construction: 2022, condition: good (used), functionality: fully functional, REF: MM6470 Lhodpfszp E T Ssx Ah Sjn Volumetric filling and sealing system for pre-made pouches (doypacks). Rotary Volumetric Filler mounted on stainless-steel frame with 1 x Pre-made pouch (doypack) filling and sealing machine. Manufacturer - Qinyao/Top Y Machinery. Date of manufacture - 2022. Setup of volumetric filling system: Stainless-steel large infeed hopper over Rotary volumetric cup filler (freestanding) with nylon volumetric cups. Setup of pre-made pouch fill and seal machine: Twin-lane bag magazine (lanes 1# and 2#), vacuum pick-up and bag opening (1#Sucking, 2#Sucking, Pick Up Bag, Open Bag), front and back sealing jaws with sponge-faced grippers, Siemens Smart Line HMI, Omron controllers for front jaw, back jaw and printer, thermal transfer ribbon coder and discharge chute. Speed – variable up to 20 packs / minute, depending on fill volume. Pack size range – can handle doypacks up to 300mm long x 250mm wide. Controls – Siemens Smart Line HMI touch-screen control with easy-to-use programme settings. Tooling – 1 x Set of volumetric cups, previously used to pack whey protein products (1000g volume), dried fruit (200g volume) and other dry ingredients (depends depending on product). Supplied with a fill head attachment for plastic scoops as the material is deposited. Electrical requirements - 3 phase. Requires compressed air supply. Condition – Very good, likely has a total use of one year production. *Please note* - the pre-made pouch (doypack) filler and sealer has previously been used / fed by a linear weigher and a multi-head weigher depending on what the products being packed were.

Year of construction: 2013, condition: excellent (used), functionality: fully functional, REF: MM6423 Complete weighing and bagging system which has previously been used to pack frozen peas and vegetarian products into pillow packs. This system comprises of the following equipment: 1 x Infeed swan-neck conveyor with flighted belt mounted on mobile frame (stored outside). Date of manufacture - 2013. Belt width - 245mm wide. 1 x Yamato Scale Dataweigh (UK) Ltd ADW-514AWCC 14-head multi-head weigher with dimple pans. Manufacturer - Yamato Scale Co., Ltd. Speed - up to 120 drops/minute (depending on product and weight). Weighing range - up to 1000g. Rated to IP66 (waterproof). Lhsdpey Um T Hofx Ah Ssn 1 x Gantry unit with steps. Footprint dimensions - 5.7m long x 2.7m wide x 2.72m high. 1 x Gainsborough Engineering Ltd GV2K3 vertical form, fill and seal bagging machine. Manufacturer - Gainsborough Engineering Ltd. Date of manufacture - 2013. Sealing jaws: Horizontal - 360mm wide / Vertical - 420mm long. Packing speed - up to 60 packs/minute (depending on bag size). Bag size range: Smallest - 80mm wide x 80mm long / Largest - 320mm wide x 350mm long. Supplied with jaws for poly and laminate film, block-bottom and gusseted bags as well as 3 x forming tubes. Forming tubes: for forming pillow/’fin-seal’ packs measuring 130mm, 220mm and 270mm wide. 1 x Outfeed inclined conveyor. Belt dimensions – 2250mm long x 425mm wide. Outfeed height – 1000mmm. Some spare parts are also included. Videos available on request.

Condition: repair required (used), Year of construction: 2003, functionality: limited functionality, REF: MM6413 Lodpfxoy Hlkbs Ah Sjhn 1 x Gainsborough Engineering Ltd packing system, previously used to pack small machine components. Comprising of infeed pocket conveyor, vertical form, fill and seal bagger fitted with Zodiac HS printer and an outfeed conveyor. Manufacturer - Gainsborough Engineering Ltd Model of VFFS bagger – GV2K1. Date of manufacture – 2003. Sealing bars - 250mm long (vertical & horizontal). Reel width - 505mm. Current film - 230mm. Sorting / infeed table - 1500mm long x 710mm wide. Outfeed conveyor - 290mm wide belt x 950mm outfeed. Overall footprint - 6.15m long x 1.7m wide x 2.2m high. Condition – Not operational, out of action 3-4 months.

Condition: used, Year of construction: 2005, functionality: fully functional, total width: 6,300 mm, total height: 2,100 mm, total length: 20,000 mm, working width: 2,600 mm, input voltage: 380 V, type of input current: three-phase, roll width: 2,600 mm, roller length: 7,600 mm, We offer this ready-to-use ICO SYSTEM reactive PUR hot melt press, model ICO SYSTEM, manufactured in 2005. Lhedpezlh Aujfx Ah Sjn ICO SYSTEM reactive PU hot melt press line – 2,600 × 7,000 mm For sale: complete industrial reactive PU hot melt press line for single-sided bonding of large sheet materials. This robust production line from ICO SYSTEM International Coating GmbH has been successfully used for years by TABB Interior Systems BV for the production of high-quality laminated sheet materials. The installation is in excellent technical condition, is fully operational, and can be put into production immediately. Key features: Reactive PUR hot melt bonding Maximum panel size: 2,600 × 7,000 mm Suitable for single-sided bonding Year of manufacture: approx. 2005 Fully functional and well-maintained PLC control with touchscreen Automatic vacuum portal for precise panel positioning Throughfeed system for controlled curing and constant pressing force Roller conveyors and transport tables included Suitable for: The installation is suitable for bonding a variety of flat sheet materials, including: plywood MDF HDF particleboard HPL composite panels aluminum and steel sheets various other industrial sheet materials. Production process The line is designed for an efficient and reproducible production process: positioning of the bottom sheet application of reactive PUR hot melt automatic placement of the top sheet using a vacuum portal passage through the heated press controlled curing and output of the finished product. Thanks to the automatic handling, large panels are produced quickly, accurately, and with consistent adhesive quality. Scope of supply The complete installation includes, among other things: ICO SYSTEM heated throughfeed system automatic vacuum portal with suction cups conveyor belts and roller conveyors control cabinet with PLC/HMI complete steel structure and handling. Condition The machine is fully operational, is still in use in production, and is available only due to a change in the production process. Inspection while running is possible by appointment. Interested? Please contact us for additional information, technical specifications, a demonstration, or an inspection. This high-quality industrial press line is ideally suited for companies that want to efficiently bond large sheet materials with a high-quality PUR hot melt bond.

Year of construction: 2003, condition: good (used), functionality: fully functional, 1 x Gainsborough Engineering Ltd packing system, previously used to pack small machine components. Comprising of infeed pocket conveyor, vertical form, fill and seal bagger fitted with Zodiac HS printer and an outfeed conveyor. Manufacturer - Gainsborough Engineering Ltd. Model of VFFS bagger – GV2K1. Date of manufacture – 2003. Sealing bars - 250mm long (vertical & horizontal). Reel width - 505mm. Current film - 230mm. Forming tube - 60mm diameter. Sorting / infeed table - 1500mm long x 710mm wide. Lhedsy Hlvwspfx Ah Ssn Outfeed conveyor - 290mm wide belt x 950mm outfeed. Overall footprint - 6.15m long x 1.7m wide x 2.2m high. Condition – Fully operational.

Condition: used, System Hall Moulder Infeed Table (2005) with Hydraulic Drive Ljdjz H I R Espfx Ah Sshn Used moulder infeed table for sale, manufactured by System Hall AB, Sweden. It consists of a chain cross transfer conveyor and an infeed section with pneumatic hold-downs, and it feeds timber into the moulder automatically and evenly. The hydraulic motors have had their seal kits replaced. Specifications: Manufacturer: System Hall AB, Falkenberg, Sweden Year: 2005 (CE) Overall length: 7.5 m Height: 1.85 m Infeed section length: 2.25 m Infeed section width: 0.9 m Drive: hydraulic (separate hydraulic power unit with electric motor), SEW gear motors Pneumatic cylinders for clamping and positioning Chain cross transfer with roller chains Included: hydraulic power unit, 4 toothed pulleys.

Condition: good (used), Complete weighing and vertical form, fill and seal twin bagging system, previously used to pack chocolate drops. This system comprises of the following equipment: 1 x Joy Conveyors product hopper. Manufacturer – Joy Conveyors Ltd. Overall dimensions – 550mm long x 610mm wide x 680mm deep. 1 x Joy Conveyors bucket elevator. Manufacturer – Joy Conveyors Ltd. 1 x Stainless-steel gantry and steps. Gantry overall dimensions – 3m long x 3m wide. 1 x High Dream AC-6B14 14-head multihead weigher with dimple pans and 10.4’’ touch-screen control panel. Manufacturer – High Dream Intelligent Machinery Co., Ltd. Weighing range – 25g – 500g. Accuracy - ±0.5g. Speed – up to 140 bags/minute (product dependent). 1 x Keymac servo-driven timing hopper. Manufacturer – Keymac Packaging Systems Ltd. 1 x Keymac vertical form, fill and seal twin bagging machine. Manufacturer – Keymac Packaging Systems Ltd. Model – BT2600 VFFS. Sealing jaws - Unit 1: Vertical - 300mm & Horizontal - 250mm. Unit 2: Vertical - 320mm & Horizontal - 250mm. Electrical requirements – 220-240 V / 60-60 hz / 1 phase. Previously running 210mm wide film. 2 x Forming tubes, each 60mm diameter. Has extension chute for larger packs. Overall dimensions - 1.9m wide x 1.6m deep x 2.1m high. Lodpfey An I Iox Ah Sshn 1 x Outfeed inclined conveyor. Infeed height - 200mm. Outfeed height - 1000mm. Belt dimensions - 3m long x 195mm wide. System footprint - 7.5m long x 3.4m wide x 4.4m high.

Year of construction: 2021, condition: excellent (used), functionality: fully functional, REF: MM6471 REF: MM6471 2021 CERTUSS complete steam generator system (Type – CERTUSS Universal 600 TC) with chemical dosing and blow-down vessel, automatically PLC controlled. Lsdpfx Ahezn Rcis Sohn The 2021 CERTUSS Universal 600 TC Complete Steam Generator System is a high-performance industrial steam generator designed to deliver reliable, energy-efficient process steam for continuous production environments. With a steam capacity of 600 kg/hour, the system is ideal for food and beverage processing, bakeries, meat and fish processing, ready meal production, pharmaceutical manufacturing, commercial laundries, chemical processing, and other industrial applications. Technical specification: ✅ Manufacturer - CERTUSS Dampfautomaten GmbH & Co. KG, Germany ✅ Model - Universal 600 TC FG/LPG. ✅ Serial number - 15716. ✅ Date of manufacture - 2021. ✅ Steam output - 600 kg/hour. ✅ Fuel - LPG (propane). ✅ Electrical supply - 3 x 415 V / 50 hz, 5.66 kVA, 16 A. ✅ Control - automatic, PLC. ✅ Run time - under 200 hours logged, according to the owner. Supplied with chemical dosing and blow-down vessel. Any further water treatment equipment is not confirmed. Located in Cullompton, Devon. Viewing by appointment. Buyer to remove.

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, type of input current: three-phase, Carton sealer, packaging machine, carton sealing machine, sealing tape machine, adhesive tape machine -Manufacturer: Soco System, carton sealer type T-55 -Carton width: max. 550 mm -Overall dimensions: 1100/800/1750 mm -Weight: 150 kg This additional information is standard for this model. Please always double-check the details during a visit. Lhodpfozhv Rlex Ah Ssn The Soco System T-55 Cartoning Machine is a state-of-the-art packaging solution designed for efficient and high-speed cartoning of various products. With its advanced technology and robust construction, the T-55 is ideal for industries requiring precise and reliable cartoning, such as food, pharmaceuticals, cosmetics, and consumer goods. Featuring a compact and ergonomic design, the T-55 maximizes floor space utilization while ensuring easy operation and maintenance. Its modular construction allows for flexibility in configuration, enabling seamless integration into existing production lines and adaptation to changing packaging requirements. The T-55 Cartoning Machine offers versatile carton handling capabilities, accommodating a wide range of carton sizes and styles, including straight-line, reverse-tuck, and glue-sealed cartons. It utilizes advanced automation and servo-driven mechanisms to ensure accurate carton forming, product loading, and sealing, minimizing downtime and enhancing productivity. Equipped with intuitive controls and a user-friendly interface, the T-55 provides operators with easy access to machine settings and diagnostics, facilitating quick setup and changeover between different carton formats. Additionally, the machine incorporates safety features to protect operators and prevent damage to products during operation. Overall, the Soco System T-55 Cartoning Machine is a reliable and efficient packaging solution that meets the demanding requirements of modern production environments, delivering consistent performance and high-quality cartoning results.

Condition: used, Log Infeed System Manufacturer: Jack Steel Year of manufacture: 2019 Hydraulic log infeed system Twin-chain feed conveyor Electric control system Suitable for feeding logs to sawmill or sorting lines Ledpszmf I Rsfx Ah Sjhn

Year of construction: 1991, condition: excellent (used), Fully automatic gate system HDN 600 with automatic infeed ZE, including mechanization. Technical data: Passage height: 700 mm Passage width: 735 mm Stroke: 600 mm Feed rate: max. 15 m/min Water-cooled guides Drive – Gearbox Lhsdpfoz Ehfaox Ah Sjn The system has demonstrably only been in operation for 10 years.

Year of construction: 2022, condition: good (used), PLP MT100 Paddle coating machine 2022, Stainless, The coating system MT is a complete machine able to mix in line pellets, kibbles, and other granulated products with additives such as liquid enzymes, fat, digest, aromas, oil, medicines, vitamins, complete with two shafts and adjustable paddles to mix and hold the product, capacity up to 50T per hour, with twin 5.5Kw motors, with heating, comes with 1500Kg buffer holding tank, infeed conveyor, paddle coater and outfeed conveyor Lhsdpfoz I Dtfox Ah Son

Condition: ready for operation (used), Log infeed line Tähkä, equipped with a lower device for turning logs Ljdpfx Asxg Rvgoh Sshn

Year of construction: 2019, condition: excellent (used), functionality: fully functional, REF: MM6372 Polar Systems Ltd bulk hopper, vibratory table, base stand, bucket elevator and diverter. Ideally suited for snack / pellet products. Manufacturer – Polar Systems Ltd. Lhjdpfx Aoynnlioh Sen Date of manufacture – 2019. Bucket elevator dimensions - 2550mm long x 1250mm wide x 3850mm high. Bulk hopper, vibratory table and base stand dimensions - 2550mm long x 1600mm wide x 3400mm high.

Condition: used, functionality: fully functional, This is a drying and disinfection system for boots and shoes manufactured by PHT, type HYGIfeet M5. The Hygifeet drying and disinfection system is the innovative solution for all communal areas. The system stores shoes and boots after use and disinfects and dries them simultaneously. Disinfection is carried out safely using ozone, thus eliminating the need for chemicals. Simultaneous drying is achieved through warm air, ensuring a short drying time. The ozone-warm air mixture is only released at the valve heads when boots are placed on them. In addition, the valve heads are ergonomically designed for optimal air circulation. Warm, dry boots increase the well-being of your employees and prevent diseases through disinfection. The device has been tested in our in-house workshop and is fully functional. Manufacturer's recommended retail price: €2,721 net = €3,238 gross Our special price: €1,210 net = €1,439 gross OUR USED EQUIPMENT SERVICE FOR YOU: 6-month warranty on all electrical parts High-quality branded equipment at fair prices Professional overhaul/inspection & expert cleaning Tested & fully functional - or money back Flexible shipping or self-collection options Competent advice - before and after purchase Provision of operating instructions, connection diagrams & spare parts Inspection according to DGUV V3 TECHNICAL DATA: External dimensions WxDxH: 360x470x1950mm Electrical connection: 230V, 50Hz, 0.55kW Serial number: 2892/22-60623 Year of manufacture: 2022 Capacity: 5 pairs of shoes Condition: Used, tested and fully functional SHIPPING: Lhodpfszxn Rfsx Ah Son Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Do you have any questions, would like to request advice, or would like to see something on-site? You can reach us by phone during our opening hours: Monday to Friday from 9:00 a.m. to 1:00 p.m. and from 2:00 p.m. to 5:00 p.m. The sale is subject exclusively to our general terms and conditions (GTC).

Condition: used, functionality: fully functional, This is a boot and shoe drying and disinfection system from the manufacturer PHT, type HYGIfeet M5. The Hygifeet drying and disinfection system is an innovation for all communal areas. The system stores shoes and boots after use and disinfects and dries them simultaneously. The disinfection is carried out safely using ozone, thus consuming no chemicals. Simultaneous drying is achieved using warm air, which ensures a short drying time. The ozone-warm air mixture is only released at the valve heads when boots are placed on them. In addition, the valve heads are ergonomically shaped for optimal air circulation. Warm, dry boots increase the well-being of your employees and prevent diseases through disinfection. The device has been tested in our in-house workshop and is fully functional. Manufacturer's list price: €2,721 net = €3,238 gross Our special price: €1,210 net = €1,439 gross OUR USED EQUIPMENT SERVICE FOR YOU: 6-month warranty on all electrical parts Ljdpfxozxn Sij Ah Sohn High-quality branded equipment at fair prices Professional overhaul/inspection and expert cleaning Tested & fully functional - or money back Flexible shipping or self-collection options Competent advice - before and after purchase Provision of operating instructions, connection diagrams & spare parts Inspection according to DGUV V3 TECHNICAL DATA: External dimensions WxDxH: 360x470x1950mm Electrical connection: 230V, 50Hz, 0.55kW Serial number: 2893/22-60623 Year of manufacture: 2022 Capacity: 5 pairs of shoes Condition: Used, tested and fully functional SHIPPING: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Do you have any questions, would you like a consultation, or would you like to see something on site? You can reach us by telephone during our opening hours: Monday to Friday from 9:00 a.m. to 1:00 p.m. and from 2:00 p.m. to 5:00 p.m. The sale is exclusively subject to our general terms and conditions.

Condition: new, Hygienio B1.N1 Steam Disinfection System The B1.N1 is ideal for ambulances, doctor's offices, dental practices, and smaller spaces. Its compact size and unique features make it the perfect choice. If you are looking for a reliable and efficient disinfection solution without complicated operation, the Hygienio B1.N1 is just what you need. The ultimate, simplified disinfection system – developed for easy operation and handling. The B1.N1 model does not have an electronic control unit and is therefore particularly easy and effortless to use. Thanks to the manual and direct system status check, you have full control over the selection of the correct application mode – whether disinfectant or steam. The fluid tanks are equipped with optical level indicators, so you can monitor the level at any time and prevent possible damage to the internal components. Mobility: 4 abrasion-resistant rubber wheels Consumption: 2 liters of disinfectant solution per hour Ljdpfxoykt Ino Ah Sjhn Tank capacity: Water tank: 2 l / Disinfectant tank: 2 l Working pressure: 2.5 - 4 bar Dimensions: 93.5 x 48.5 x 35.5 cm Lance length: 240 cm Weight: 23 kg Length of power cord: 4 m Manufacturer's price: €3500 You can find more items – new and used – in our shop! International shipping costs upon request!

Year of construction: 2013, condition: ready for operation (used), Two Belimed cleaning and disinfection devices RDG with integrated drying are available. Washing chamber dimensions X/Y/Z: 690mm/630mm/800mm, usable volume: 350l, coarse filter: 2mm, fine filter: 1.5mm, drying temperature: 110°C, air filter: HEPA H13, separation efficiency: 99.95%, A0 disinfection value: 3000. Machine dimensions X/Y/Z: approx. 1850mm/900mm/950mm, weight: approx. 400kg. Documentation available. An inspection on site is possible. Lodpsy Ey Tnofx Ah Sehn

Condition: used, Year of construction: 2006, Overview This Eticap System AR/M 5T 4S CA is an automatic rotary labeling machine for self-adhesive labels on cylindrical bottles, built in 2006 by the Italian manufacturer Eticap System. It has been used for wine bottling and is fitted with four labeling heads for front label, back label, tax strip stamp and neck label. The bottles enter on the conveyor, are spaced by an infeed screw, transferred by starwheels onto the rotating bottle plates of the carousel and labeled in sequence by the heads. The label size is adjustable to the format. The neck label head was never used in production. Technical data - Manufacturer: Eticap System - Model: AR/M 5T 4S CA - Year of manufacture: 2006 - Machine type: rotary self-adhesive labeler for cylindrical bottles - Labeling heads: 4 (front label, back label, tax strip stamp, neck label) - Output: up to 2,000 bottles per hour - Label size: adjustable - Power supply: 380 V Lhedpfoz Sp Iwox Ah Sjn - Weight: 1,600 kg - Construction: stainless steel frame with transparent safety guarding Equipment - Infeed and outfeed conveyor - Bottle infeed screw and transfer starwheels - Carousel with rotating bottle plates - 4 self-adhesive labeling heads - Stainless steel control cabinet with operator text display, start/stop and conveyor controls - Safety-interlocked doors and emergency stop - CE marking Condition The machine is still installed and can be inspected on site by appointment. Availability Available immediately. Location: Spain.

Condition: used, Smicon AFT 2/1500 Fumigation / Fumigation System Fumigation involves filling a space with a toxic gas to combat pests/bacteria. Because toxic gases are used, special safety measures are required. Fumigation is commonly used in the storage of organic materials (e.g., grain storage, in warehouses in ports, silos, mills), and also in churches to control woodworm. This is a device used for disinfecting rooms. Formaldehyde is heated on the left hotplate and, together with condensed water (right hotplate), is placed into a room via an airflow, where it kills all bacteria. Former list price: €10,900 net Ljdpfx Aedviynoh Sohn You can find more new and used items in our shop! International shipping costs available upon request! Item condition: used

Condition: used, Smicon FTA 1500U-6L Fumigation / Fumigation System Fumigation involves filling a space with a toxic gas to control pests/bacteria. Because toxic gases are used, special safety measures are required. Fumigation is commonly used in the storage of organic materials (e.g., grain storage, in warehouses in ports, silos, mills), and also in churches to control woodworms. This is a device used for disinfecting spaces. Formaldehyde is boiled on the left hotplate and, together with condensed water (right hotplate), is placed in a room in an airflow, where it kills all bacteria. Former list price: €9,900 Item condition: used You can find more new and used items in our shop! Lhedjdviyxjpfx Ah Sjn International shipping costs available upon request!

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: SO-22949/1/19, REF: MM6218 1 X Sparc Systems 8-lane linear weighing combination system. Lhodpfx Aexd Thmsh Ssn Technical specification⚙️ ✅ Manufacturer - Sparc Systems Ltd. ✅ Model - LCWS. ✅ Overall dimensions - 1620mm long x 920mm wide x 1620mm high. Note 🗒️ Seller has a quote for service and getting production-ready at cost of £12-15k per unit.

Condition: used, Used Alpine Model 630AFG stainless steel Aeroplex fluidized bed opposed jet milling system. Stainless steel classifier wheel belt driven by 15kw, 400/690volt, 2/50, 2940rpm motor. Unit includes (4) jet nozzles. Includes product feeding vessel approx 230 litre capacity with stainless steel screw feeder driven by 1.5kw, 400volt, 3/50, 1440rpm motor. Unit all mounted on common mild steel frame. Specifications: Motor Power: 20.1 hp Lhedps Adq H Refx Ah Sjn

Condition: used, Veolia Water System, Model - Orion 2000 Orion™ is a skid-mounted, multi-technology purified water production system. Offering softening, reverse osmosis and continuous electrodeionization (CEDI) technologies that can be fully or partially hot water sanitized. Ideal for use as a pharmaceutical water system for the generation of purified water. Orion is digitally-enabled to offer the ability to remotely monitor any parameters you want. Lhsdpfx Ahjz Ic T Rs Son

Condition: excellent (used), Year of construction: 2013, operating hours: 3,525 h, functionality: fully functional, machine/vehicle number: 801213, type of input current: three-phase, input voltage: 380 V, LAMINA CLG 1816 CRASH LOCK FOLDER GLUER 1, 3 OR 4 GLUE POINTS • NORDSON • COLD GLUE & HOT-MELT LAMINA CLG 1816 Crash Lock Folder Gluer available for sale. Manufactured in 2013, this machine is equipped with a professional NORDSON gluing system and can operate with 1, 3, or 4 glue points, providing excellent flexibility for different box constructions and packaging applications. The machine can work with both cold glue and hot-melt adhesive. MACHINE SPECIFICATIONS • Manufacturer: LAMINA System AB, Sweden • Model: CLG 1816 • Machine type: Crash Lock Folder Gluer • Year of manufacture: 2013 • Serial number: 801213 • Gluing system: NORDSON • Gluing configurations: 1, 3 or 4 glue points • Adhesive: Cold Glue and Hot-Melt • Operating hours: 3,525 hours • Total boxes glued: 1,595,966 • Automatic feeding • Automatic folding and gluing LOW USAGE Although the machine was manufactured in 2013, it was used in production for only approximately one year. The machine currently shows: 3,525 operating hours Lhsdpezyu Nqofx Ah Sjn 1,595,966 boxes glued This represents a relatively low level of use for an industrial folder gluer of this type.