Bar feeder buy used

Recognised location: Ashburn (US) (Change)
Enter e-mail address
or
Move
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Enbnrsr Portable Cold Material Feed Bin System manufactured by BARBER-GREENE with the following Components and Features: -- (3) 8' x 8' material Feed Bins with Bin Extenders. -- Each Bin fitted with 24"" Variable Speed Feeders that are set up for 3 HP [...] Motors with DODGE Reducers but NO MOTORS are included. -- 24""Collecting Belt Conveyor with Drive Motor and Reducer with 5’ Discharge “Stinger” Section at the end. -- More photos to ... more
6
Bar feeder for lathe, bar loading magazine bar feeder FMB Hydrobar Type Turbo 3000/1700 make: LMS No. 3-200943 1989 rod diameters up to 38 mm material nominal length 3000 mm Material Max. 3200 mm compressed air 6 bar Power lubrication approximately 1.1 kW motor power feed 0.25 kW Power supply 380 V, 50 Hz - mechanical feed via chain drive gear motor - pipe end with collet 18 mm (18 mm collet is available) - open and close the Rod guide with pneumatic cylinders - rod guide by guiding inserts made... more
5
- control: CNC SIEMENS 840 D - max. turning diameter: 100 mm - max. swing diameter over bed: 145 mm - max. turning length: 320 mm - center distance: 580 mm - 2 turrets with each 12 stations (all driven) Baf92kjlg7 - tool holder VDI 25 - sub spindle - spindle speed: 40 - 8000 rpm - barfeeder IEMCA BOSS 542/32 - weight: ca. 5.000 kg including barfeeder more
6
Our customer have sold his machine (Biglia) without this barfeeder. This barfeeder can lift up more bars in bundle. It have one extra channel Bbdf3clqm9 more
6
Bar loader bar feeder feeder magazine Manufacturer: EMT bar feeding system TYPE: SUPER 100 Serial number: S0403-0201 Year of built: 2004, but only half a year has gone due to product changes. Round Rod diameter: 6-100 mm Hexagonal Rod diameter: 6-85 mm Max length: 1.850 mm Maximum Rod weight: 105 kg The documentation (2 manuals) are available from the bar loader. Bbfix3f07l 1 euro pallet with the approx. mass H 165, B 120, L 220, and the weight is about 500 kg. The bar loader... more
4
IEMCA - bar loading magazine, oil-flooded, very good condition, the loader has been tested and revised part. Machine main spindle - server side right; -> Material support from the front, see image... Bar feeder for rod diameter 32 mm,. Material length of 3200 mm, total length approx. 5000 mm; weight 800 kg suitable for portable Z-spindle machines: synchronous control available. Electrical connection for TORNOS SIGMA 20, SIGMA 32; DECO 2000; DECO 20A; DECO 26A; Built-in EVODECO 20 EVOD... more
6
Kupa LM1500 bar feeder Year built: unknown Diameter: 4-85mm Length: 650-1700mm Max. Bar weight: 125kg Height adjustment: 860-1200mm Muayx0 Drive: Servo Machine dimensions: 220x90x160cm Weight: 400kg more
2
930y0pxlq more
1
__it__ bar loader  CUCCHI  max diam. 45mm  lengths 4mt. Ba0co7ultf more
1
BAR LENGTH: 3000 mm BAR DIAMETER: 52 mm Gu9w2k PRICE: On demand more


bar feeder
every day

New machines via email!

Be informed!
6
MAZAK SQT-250M YEAR CONSTRUCTION 1998 AXIS C MOTORIZED TOOLS NR2; 1 axial + 1 radial TOWER 12 POSITIONS AUTO CENTER DIAMETER 250 MM PILERS NR 6 BAR SPING FEEDER THREADED DIAMETER 350 MM TURNABLE LENGTH 1000 MM QUICK START 30 MT-MIN Dvysle GIRI MANDRINO 4000 MOTOR POWER DUTY 18.5 KW STRAIGHT BAR 65 MM TRUCK TRANSPORT TAILSTOCK until December 2017 still in the original company north Italy more
2
- new, not used - Installation possible for short or swiss-type lathe - bar diameter 2-20 mm Lzv8v - max. bar length 3210 mm - min. bar length 700 mm - bar capacity 260 mm - bar change over time 30 s - Plandrehanschlagklappe - voltage 400 V - weight ca. 680 Kg - dimensions (LxWxH) ca. 4800 x 600 x 1500 mm more
5

Barfeeder FMB Turbo 5-55

Eibenstock Germany
6789 km
2008
excellent (used)
Bar loader: FMB Turbo 5-55 Year of construction: 2008 Channel: 50mm Bbd0dvwru3 The lathe where it was cultivated had only 4000h operating time Absolutely great condition Dimensions of the loader: 4,4x1,0x ca.1,5m Weight bar loader: max. 1000kg more
6
Bar loaders for lathes, bar feeder, Rod loader Bar feeder TRAUB Stamag DNH 42 type Year of construction 1998 Rod diameter 42 mm Nominal length 4000 mm The charger has no own control. Ikgdrzn Can be driven but a Tan with TX8H control directly. more
1
BAR LENGTH: 3400 mm BAR DIAMETER: 20 mm Ceg0jitm WEIGHT: 1080 Kg OVERALL DIMENSIONS: 5000 x 600 x 1280 mm PRICE: On demand more
1
Bar length up to 3.200mm, Chain Loader,  Bbfdxrnier more
2
- possible Installation for short or swiss-type lathes - bar diameter 2-20 mm Yqi8hk - max. bar length 3210 mm - min. bar length 700 mm - bar capacity 260 mm - bar changeover time 30 sec - voltage 400 V - weight ca. 680 Kg - dimensions (LxWxH) ca. 4800 x 600 x 1500 mm was installed at TRAUB A15 guide channel D 6 mm more
4
Bar feeder Wabcfpwla Manufacturer: LMS Type LMS Turbo 3100/1200 year: 1990 Condition: good more
2
TECHNICAL DETAILS, min. / max. Ø : 2 / 16 [mm], max. bar length : 4 [m] Etymjchx0 more
5
Bar feeder Make: FMB Ba3tqt7ope Type: Turbo 10-72 / 4200 Year of construction: 2004 Material length: up to 4200 mm Ducts: Ø42, Ø45 and Ø65 With a synchronous device for machines with movable main spindle more
2
BAR LENGTH: 3700 mm BAR DIAMETER: 60 mm OVERALL DIMENSIONS: 5100 x 800 x 1300 mm 8ljgvk8ph PRICE: On demand more
6
LNS Type Quick Load Servo II Barfeed, Minimum Bar Diameter 6mm, M9ibr Maximum Bar Diameter 120mm, Maximum Bar Length 1500mm. S/No. 153089 (2000) more
2
Maximum bar length 3200 mm Bar diameter 5-42 mm Yffhx0s Feeding left from machine more
1
Serial number 8098000028B Capacity 10-80 mm Bhx2idn Power 0.3 kW Manuals electric and mechanic Weight ca 950 kg Good condition. more
2
TECHNICAL DETAILS, Max. diameter : 42 [mm], Max. bar length : 2900 [mm] Chyl8odz more
3
- control: Siemens 840 C MAIN SPINDLE - max. bar diameter: 42 mm - spindle speed: 31-6300 rpm - C-axis Balu0gyrse - turret 1 with 8 Stations (4 driven) - travel range turret 1: Z= 280, X= 155 mm - turret 2 with 8 stations (4 driven) - travel range turret 2: Z= 132, X= 82 mm - speed live tools: 0-5000 rpm SUB SPINDLE - max. bar diameter: 42 mm - spindle speed: 0-5000 rpm - C-axis ACCESSORIES - barfeeder Simac 65.1 3200, with guide channels in 5 mm steps - chip conveyor - coolant make-up with... more
4
97xgmuj03BAR LENGTH: 3300 mm BAR DIAMETER: 5-65 mm WEIGHT: 1400 Kg PRICE: On demand more
1
Bar feeder Manufacturer: IEMCA Type: T560 Rod length: 3300 mm Weight: approx. 1 t Fsqhow97c more
3
Short with magazine rod feeder capacity and type of rods: round rods 3-80 mm L2yxvrk Length of rods (depending) 1325 mm Height of lathe centre line 700-1500 mm more
1
Kanal D 21 was built on STAR 93cglaynb more
3
TECHNICAL DETAILS, Max. clearance diameter : 16 [mm], Total length : 5400 [mm] 9327f9fxk more
3
Control Mazatrol T32B Turning dia 160 mm Swing dia 300 mm Turning length 285 mm Spindle hole D50 mm Spindle face A2-5 Caaw7uwk Spindle speed 50 - 5000 rpm Turret 12-fold Spindle power 5,5 kW Power required 22,5 kVA MAchine size LxWxH = 1860 x 1300 x 1750 mm Weight 2700 kgs Accessories - 3 meter barfeeder - Chip conveyor - Toolholders - Hydraulc chuck - Coolant unit The machine is still in production and can be taken after the new machine is arrived soonest in January 2018. It can be tes... more
2
BAR LENGTH: 4300 mm BAR DIAMETER: 5-65 mm WEIGHT: 1950 Kg Bfjmtk2u PRICE: On demand more
6
SN 71000555 max. rod length 650 - 1.200 mm bar diameter 5 - 72 mm Baj9ctydv0 400 Volt / 50 Hz 2 kW Gewicht 450 kg LxBxH 1.900x1.000x1.600 more
2
8zd2wzjer1 used bar Feeder with oil IRCO 42.7 also for Mazak and Emco - machines more
6
Full automatic saw for pipes and bars: up to 80mm Manufacturer: ADIGE sala Type: TT640 Year of manufacturing: 1995 Ersoed3ve Complete set with bar feeder and Deburring machine: Manufacturer: ADIGE sala Type: ST660 If you have questions please don't hesitate to ask. Best regards, Bram van Summeren Second Owner more
4
TECHNICAL DETAILS, Max. clearance diameter : 16 [mm], Total length : 5400 [mm] M3hdl more
1
Kanal D 21 mm Bn22zv37 Slide 16 mm was built in STAR SA 16 more
4
MAX ROTATING DIAMETER: 420 mm MAX TURNING LENGTH: 200 mm MAX TURNING DIAMETER: 150 mm BAR PASSAGE: 45 mm SPINDLE: 5000 rpm; 7,5 Kw; ASA 2-5 Ba0xkzplng COUNTER SPINDLE: 5000 rpm; 7,5 Kw; ASA 2-5 DRIVEN TURRET HEAD: 12 + 12 POS CONTROL UNIT: MSC 501 BAR FEEDER: IEMCA mod. MASTER 880P BAR LENGTH: 3300 mm BAR DIAMETER: 8-80 mm WEIGHT: 5800 Kg ACCESSORIES: SWARF CONVEYOR; PIECE CONVEYOR; PCMCIA SERIAL PORT PRICE: On demand more
6
year 2005, maximum diameter on wagon 410mm, maximum torque diameter mm 170, axis stroke x mm 170, axis stroke z 350mm, inclination of the counter 60 °, mandy a2-5, bar passage 52 mm, spindle motor kw 5.5, rpm6000, load MBF 1000T bar, Wn9dg diam. max 42 mm bar length 1000 mm, cnc Fanuc 21i more
1
bar diam. 3 - 36 mm max. bar length = 3,2000 mm Fekvvl7xg 1 KW appr. 1 tons L/W/H = 5,300/540/1,200 mm more
2
- max. bar length 3.200 mm Kqnzur8qb - guide channel D 21 mm - length barpusher 1.440 mm more
1
 Start Chat

CNC lathe + bar feeder Saeilo CONTUR LT-400 MC

Bielefeld Germany
6455 km
2011
used
CNC lathe + bar feeder SMA-REF-5882 Type: CNC lathes Manufacturer: Saeilo Model: CONTUR LT-400 MC Year: 2011 Control: Fanuc 0i-TD Spindle: 11/15 kW Working range: Turning diameter: 400 mm Turning length: 500 mm C-axis Features: Driven tools (VDI 40) Bar feeder Multi 3000 LR 1640/80 2nbbe7xku Condition: ready for action under power Spindle working hours: 4.700 h Location: Eastern Germany Availability: on demand more
4
STOCK NO.: 3238 BAR FEEDER D98h3fhaa MANUFACTURE: LNS, TYPE: ECO LOAD SERIAL NO.: 2000043, BUILD: 2000 Specifications: Max. Bar lengt 1200 mm Min. / Max. Diameter 5-65 mm Voltage 380 Volt Length 1700mm, Height 1400mm, Width 1200mm, Weight 210Kg more
6
MAX TURNING LENGTH: 200 mm MAX TURNING DIAMETER: 170 mm BAR PASSAGE: 46 mm SPINDLE: 5000 rpm; 5,5 - 7,5 Kw; ASA 2-5 COUNTER SPINDLE: 5000 rpm; 5,5-7,5 Kw; ASA 2-5 DRIVEN TURRET HEAD: 12 + 12 POS CONTROL UNIT: MSC 518 BAR FEEDER: IEMCA CNC BOSS 542/32 BAR LENGTH: 3200 mm BAR DIAMETER: 45 mm ACCESSORIES: PARTS CATCHER; SWARF CONVEYOR Ba0xkp8fzf PRICE: On demand more
4
BAR FEEDER "TORNOS" TYPE ROBOBAR SSF Vqqmwe 3 pce on stock price for liquidation more
4
Voltage: 400 KW: 2 Hertz: 50-60 -defekte inlets- Bplh2zhm more
6
1 x charging tray Index MBL 65 last mounted on index GU 600 Technical data: Material diameter: round: 18-65 mm hex: 16-55 mm square: 14-46 mm Rod length: min: 2,000 mm Max: 3,600 mm Feed max: 24 m / min Change time: approx. 45 sec. Power plant: hydraulic motor Dimensions: l: 5.1 x w: 0.85 x h: 1.25 m Weight: 1,970 kg 877ie839h Second charger in stock. more
6
Barfeeder is in Switzerland. Durchmesser ø 8-80 mm Stangenlaenge 440 – 1905 mm 87jzjfov7 Beladesystem Kettenlader more


bar feeder
every day

New machines via email!

Be informed!

to

to

Change search
BAR FEEDER
SELL IMMEDIATELY
on Europe's market leader for as little as € 0,79 per ad.
Find out more now


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machine Finder chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close