Used Stromab for sale (64)

Condition: used, Stromab Cutting Machine for Boards up to mm. 250, height mm. 100 Hpsdpjrnbnkefx Agwea

Condition: new, Year of construction: 2024, Cutting capacity: 55x360, 80x340, 95x325, 125x295, 135x280 mm Minimum work piece thickness mm.10 Working table tilted 8° Cutting unit technical features: Pneumatic upstroke saw TR500 Motor power 10 HP (7,5 kW), Volt 400/50 Hz. TCT Blade dia.500 mm., F=30 Z=144 S=4,6 Cutting cycle speed: 4 seconds Push feed system technical features: PUSH FEED SYSTEM AVAILABLE LEFT AND RIGHT SIDE Feeding by rack and pinion system and brushless motor Positioning precision +/- 0,4 mm Strong infeed motor for a packet weight of 80 kgs Maximum push feed system speed 90 m/min Pneumatic rising of the pusher at the end of the cutting cycle and overhead returning. Data entry management: 12 inch TOUCH-SCREEN Controller (800x600 pixel) USB Port Ethernet Port LINUX Operating system Loading and save machine parameters via USB Port Cutting cycle (pattern) editing and entered directly on the controller Transfer of cutting lists created by PC via USB or Ethernet Port Working software: Manual input of loading board length Partial optimization without length reading of the board Cutting cycle with 3 optimization options (Maximum length, Sequence and Board sequence) N°1000 cutting lists made up of 11 sizes or one list of 10000 sizes in sequence Package "OPTI": automatic board length detection and full optimization. Piece length reading by photocell Cutting cycle: with 6 optimizing criteria: (Longest length, Sequence, Board sequence, Volume, Minimum waste and Priority length) Package "OPTI PLUS": total optimization with knots and defects removal (OPTION NOT INSTALLED ON THE MACHINE) Hjdpshw Ng Ijfx Agwjpa Technical Description: Package "OPTI PLUS": for knots and defects removal Photocell for reading wood mapping knots and defects Marking with fluorescent chalks/crayon (Note Ð Can only be ordered in combination with ZA250) Pneumatic side clamp device

Condition: used, Year of construction: 2004, functionality: unexamined, machine/vehicle number: 240850, overall weight: 1,600 kg, working length: 7,000 mm, clamping range: 1,350 mm, It was in working condition until it was replaced, hasn't been used for years. Has been stored in dry conditions is a shed, outside temperature, there has some rust appeared and needs maintenance. If you have any questions don't hesitate to ask! Workpiece max length 7000mm, max height 1350mm. Hpsdpfowxvc Sox Agwja

Condition: used, SECOND-HAND RADIAL ARM SAW STROMAB Hodpfswr T Hbsx Agwopa

Condition: like new (used), Year of construction: 2023, For sale: used Stromab CT600 saw Year of manufacture: 2023 Saw in very good condition, normal signs of use. 13 m infeed table with milling unit 6 m outfeed table Hsdevplzgopfx Agwspa Table rotates 80 degrees 18-inch output monitor

Condition: used, Stromab TR350 chop saw IDC000098 Hjdpou Dhzisfx Agwopa - complete with filter - with roller conveyors

Condition: new, Touch - Screen 7” in Color Programming directly via Touch Screen chalk line cutting working according to program 1 pcs pusher for cut off pieces hydraulic saw blade movement machine according to CE norm brake motor safety & noise protection hood incl. 1pcs HM saw blade saw motor 7,5 kW, 400 V, 50 Hz saw blade DM 500 mm Hsdpfxjdify Ij Agwspa work piece feeder system with toothed belt feed speed 120 m/ min cutting accuracy +/- 0,8 mm cutting capacity up to 100 cuts/ min min work piece length 550 mm min. work piece width 40 mm Option: - additional infeed table - additional out feed table - TCT saw blade DM 500 mm

Condition: excellent (used), Block Gluing Press STROMAB SL2-6000 Gluing length: 6000mm Gluing height: 1200mm Maximum gluing width: 200mm Hpodjwzg Scepfx Agwja Number of vertical hydraulic presses: 12 Number of frontal presses: 6 Cylinder diameter: 70mm Vertical cylinder pressure: 7300kg CE certificate DTR documentation

Condition: used, Year of construction: 2021, Drawer Clamping Machine – STROMAB STC 2500 B Technical Description: • Working capacity: 2100 x 1000 mm • No. 2 working stations Hpodpfxsxg I Slj Agwja • Two-hand safety control button • No. 8 pneumatic cylinders, diameter 115 mm • Thrust per cylinder: 700 kg • No. 8 cast iron squares, height 170 mm Machine Configuration: • Frequency: 50 Hz • Standards: CE compliant • Electrical supply: 400 V – three-phase

Condition: used, Year of construction: 2007, machine/vehicle number: 1377, SECOND HAND PNEUMATIC END CUTTING SAW STROMAB MOD. TR500 - CE RULES - with electronic positioning stop TIGERSTOP of 4000mm - infeed roller table of 4500mm - outfeed roller table of 4500mm - blade diameter: 500mm - maximum cutting capacity: 360 mm (L) at 60 mm (H), 135 mm (H) at 280 mm (L) - 10 hp motor - 415 volts Hpodpfxjt U Izpo Agwsa - serial number: 1377 - year 2007

Condition: new, Year of construction: 2023, cutting height (max.): 200 mm, overall weight: 700 kg, cutting width (max.): 660 mm, disc diameter: 600 mm, Good morning, We offer for sale a brand new crosscut saw manufactured by the Italian company STROMAB model TR601 To begin with, some useful information about the machine: * three-phase motor of 9,2 kW ( 12 HP ). * motor speed - 2636 rpm. * disc diameter - 600 mm * blade opening - 30 mm * max cutting width - 660 mm ( at element height - 30 mm ). * max cutting height 200 mm ( at element width 300 mm ). * outlet for sawdust extraction fi 100 mm * ratchets for cutting to the specified length. * hydraulic element pressure and disc movement. * regulation of cutting speed * maximum operating pressure - 70 bar * weight 700 kg * left long table and right shorter table included Hodoqu Uz Tspfx Agwjpa Machine brand new, available from stock.

Condition: excellent (used), Year of construction: 2021, operating hours: 80 h, functionality: fully functional, machine/vehicle number: Stromag CT 600 F, saw blade diameter: 600 mm, cutting height (max.): 410 mm, feed length X-axis: 7,000 mm, feed rate X-axis: 90 m/min, cutting width (max.): 250 mm, total length: 12,000 mm, overall weight: 2,700 kg, type of input current: three-phase, workpiece weight (max.): 80 kg, cutting length (max.): 6,600 mm, air demand: 350 m³/h, input voltage: 400 V, extraction connection diameter: 110 mm, spindle motor power: 7,500 W, main saw diameter: 600 mm, saw blade speed: 2,560 rpm, operating pressure: 6 bar, Keveset Használt.Maró állomás is van benne. Hjdpfx Ajxcihgjgwspa

Condition: used, Technical data: Max saw diameter: 600 mm Hsdpfxeri Si De Agwspa Min saw diameter: 590 mm Saw spindle diameter: 30 mm Pneumatic saw feed Max cutting height: 210 mm Max saw blade advance width: 500 mm 2 pneumatic clamps Extraction spigot diameter: 155 mm Work table dimension: 790x910 mm Power supply: 400 V Motor power: 11 kW Overall dimensions: Length: 1550 mm Width: 1550 mm Height: 2000 mm

Condition: new, Year of construction: 2024, functionality: fully functional, saw blade diameter: 500 mm, cutting height (max.): 145 mm, cutting width (max.): 510 mm, overall weight: 400 kg, extraction nozzle diameter: 150 mm, rotational speed (min.): 2,800 rpm, power: 5.5 kW (7.48 HP), STROMAB PS 50/F pendulum cross-cut saw, brand NEW Specification: • condition - new • engine power - 5.5 kW • blade diameter - 500 mm Hpedpfjrdwm Tjx Agwea • engine shaft diameter - 30 mm • engine speed - 2,800 rpm • max cutting width - 510 mm • max cutting height - 145 mm • additional extension tables - 2 x 2 m • weight 400 kg • 2024/2025 year of manufacture • noise emission - 85.5 dB (A) • the machine meets CE standards Additional information: • tables visible in the photos included with the machine (2 x 2.0 m) • available within 7-10 working days • the price does not include VAT and transport costs