Used Styrofoam Milling Machine for sale (64,303)

Year of construction: 2017, condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 5,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,250 mm, spindle speed (max.): 6,000 rpm, table load: 15,000 kg, Fully operational condition + regularly serviced by the machine manufacturer The machine was built in 1998. In 2017, the control system was completely renewed for approximately €40,000! TECHNICAL DETAILS Bedpfx Abow N Nnbopocu X-axis: approx. 5,000 mm Y-axis: approx. 2,500 mm Z-axis: approx. 1,250 mm Control unit: Fidia CXR with handwheel – new from 2017 Clamping table dimensions: approx. 5,600 x 2,740 x 520 mm (cast iron) Table load capacity: max. 15,000 kg T-slots and spacing: 10 x 22H8 / 255 mm Spindle Spindle type: hollow milling spindle with 78/8 flange and locknut Milling spindle power: 8 kW Spindle speed: 6,000 rpm Tool holder: ER40 collet chuck Tool release: manual Note: For approx. €10,000, a spindle upgrade kit can be retrofitted (cables & adapter plate included): Spindle speed: 24,000 rpm Tool holder: HSK63F Power: 10 kW Torque: 8.7 (S1) and 10.5 (S6) A new 6-position tool changer can also be purchased in combination with the spindle upgrade (approx. €4,000). MACHINE DETAILS Connected load: approx. 28 kW Main fuse: 63 A Installation space required: approx. 8,000 x 5,000 x 4,500 mm Total weight: 25,000 kg

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 06651, travel distance X-axis: 6,800 mm, travel distance Y-axis: 3,700 mm, travel distance Z-axis: 1,500 mm, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 10 m/min, total length: 15,000 mm, total width: 7,500 mm, spindle speed (max.): 4,000 rpm, total height: 7,000 mm, table height: 1,100 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 10 m/min, distance between stands: 3,300 mm, type of input current: three-phase, table load: 50,000 kg, rotational speed (max.): 4,000 rpm, distance table center to spindle nose: 2,110 mm, overall weight: 110,000 kg, spindle motor power: 50,000 W, control cabinet length: 7,000 mm, control cabinet height: 2,000 mm, control cabinet width: 600 mm, Equipment: rotational speed infinitely variable, MODEL: Portal Type AGE: 1992 S/N #: 06651 CATEGORY: Mills, Planer Type, CNC CAPACITY: X-Axis Travel: 6800 mm Y-Axis Head Travel: 3700 mm Z-Axis Ram Stroke: 1500 mm, fixed crossrail Ram Cross Section: 500 mm x 500 mm Distance Between Columns: 3300 mm Distance Table To Ram Face: 2110 mm, vertical passage 2000 mm Table Size: 6000 x 2500 mm Spindle (Quill) Diameter: 250 mm Spindle Taper: ISO #50 Spindle Speeds: 0-4000 RPM Spindle Motor: 50 KW EQUIPPED WITH: FIDIA System C20 CNC Control, new in 2002 CNC biaxial continous milling head Universal Milling Head with Auto Indexing Right Angle Head with Auto Indexing Straight Milling Head Wagons for Head Change and Tool Pick-up Change Hydrostatic Bearings Coolant System Full Length Chip Conveyors both side Way Covers Rapid movements: Z-10.000 mm/min, X and Y-15.000 mm/min Table load: max 50.000 kg Weight of the machine: 110.000 kg Outside dimensions: 15.000 x 7.500 x 7050 mm Bcjdpfsyahv Sox Abpou Machine has been tested before dismantling and is fully operational, all mechanical components in excellent condition, electrics new in 2018. Machine available from stock.

Condition: excellent (used), Year of construction: 2021, XYZ RMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK RMX Control YOM 2021 Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Bcsdex D Tbmspfx Abpsu Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar YOM 2021 For Sale with Jet Machinery Ltd Jet Machinery Stock Number: #78900 Machine Serial Number: RM310097 £35,000.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2017, XYZ 2000 Turret Milling Machine (2017) (Ex College) 3 Axis Newhall DRO (X, Y & Knee) Spindle Taper R8 Spindle speeds to 500 – 4200 rev/min Table Size 1270 x 254mm Table Travel: X - 812mm Y - 406mm Knee Travel: Z - 406mm Quill Travel Z - 127mm For sale with Jet Machinery Ltd Bcodpjxxb Rrsfx Abpsu Jet Machinery Stock No: #79047 Machine Serial Number: 12907 Cost: £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: ready for operation (used), Year of construction: 2009, operating hours: 1,572 h, functionality: fully functional, travel distance X-axis: 3,230 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 750 mm, table width: 1,650 mm, table length: 3,000 mm, TECHNICAL DETAILS X-axis travel: 3,230 mm Y-axis travel: 2,100 mm Z-axis travel: 750 mm Table length: 3,000 mm Table width: 1,650 mm Max. spindle speed: 3,500 rpm Tool holder: ISO50 Tool magazine: 30 pcs Positioning accuracy: 0.005 mm Traverse speed: 250 mm/s MACHINE DETAILS Control: CNC Number of axes: 4 Power: 22 kW Main spindle power: 22 kW Tool magazine: 30 pcs Bsdpfoyd Acbjx Abpscu Control operating hours: 5,269 h Spindle hours: 1,572 h EQUIPMENT External cooling Tool magazine Touch probe Tool measuring system Spindle cooling Chip conveyor

Condition: repair required (used), Year of construction: 1994, functionality: limited functionality, travel distance X-axis: 650 mm, travel distance Y-axis: 400 mm, rotational speed (max.): 4,000 rpm, table load: 400 kg, controller model: Heidenhain TNC 407, TECHNICAL DETAILS Travel range X-axis: 650 mm Travel range Y-axis: 400 mm Clamping surface: 900 x 468 mm Maximum table load: 400 kg Tool holder: SK40 Spindle speed range: 20 – 4,000 rpm Drive power: 5.9 kW Tool changer: 32 positions (HTC 32) MACHINE DETAILS Bsdpfx Aboyf Agcopecu Control: Heidenhain TNC 407 Dimensions & weight Dimensions (L x W x H): 2,000 x 2,500 x 2,100 mm Machine weight: approx. 3,500 kg Note: The machine's Simodrive is defective.

Condition: excellent (used), feed length X-axis: 700 mm, feed length Y-axis: 350 mm, feed length Z-axis: 475 mm, travel distance X-axis: 700 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 475 mm, spindle speed (max.): 1,500 rpm, spindle speed (min.): 25 rpm, quill stroke: 100 mm, table length: 1,360 mm, table width: 300 mm, Cincinnati 2MK Horizontal Mill with Universal Vertical Head Model: 2MK Table Atea: 1360 x 300mm (53.5” x 11.8”) Longitudinal Travel: 700mm Cross Travel: 350mm Vertical Travel: 475mm Spindle Taper: 50 INT Spindle Speeds: 25 – 1500 RPM Machine with: Bsdpfx Ajygk Drobpocu Horizontal Arbor & Arbor Support Angular Double Swivel Head

Condition: used, Year of construction: 2000, Nicolas Correa CF22/25 Plus CNC Bed Type Milling Machine With Heidenhain TNC-426 Control Table Dimension 2,500 x 700mm (5 'T' Slots). Maximum Table Load 3,500kg. Axis Travel 'X'=2,500mm, 'Y'=800mm, 'Z'=800mm. Rapid Traverse 'X'=12m/min, 'Y'=12m/min, 'Z'=12m/min. Cutting Feed 'X, Y, Z'=5-5,000mm/min. Spindle Taper ISO 50. Spindle Speed Range 20-4,000rpm (22kW Motor). Universal Manual Rotary Spindle Head. S/No. 967319 (2000). With Coolant System. Weight 10,000kg. Bodeydmhzopfx Abpecu

Condition: used, Year of construction: 1997, Year: 1997 Table: 1780 x 415mm Spindle Speed 30 – 2066 RPM FIDIA Control Bcodpfswtd Dyex Abpeu Power Draw Bar LOVO Light Coolant

Condition: refurbished (used), Table Size: 1635mm x 460 mm X Long Axis: 1300 mm Y Cross Axis: 700 mm Z Vertical Axis: 500mm Spindle Taper: 40 ISO Spindle Speeds: 30-2066rpm Feed Range: 1.6 to 820mm/min Rapid Feed Rates X/Y/Z: 2800mm/min Bcedpswh N Uyjfx Abpsu Max. distance between milling head and table 649 mm Machine Weight 3200 kg Machine Dimensions L x 2361mm D x 2500mm H x 1648mm Main Motor 8.7 kW Machine Light Universal Head Coolant Condition: Fully Refurbished (reground, hand scraped and re-aligned) New Screws & Nuts on X, Y and Z

Condition: excellent (used), Year of construction: 2011, New 2011 Axis X 785 mm Axis Y 470 mm Bodpjtt Ivbsfx Abpecu Axis Z 530 mm CNC PROTOTRAK PMX Table length 900 mm Table width 500 mm Max. part weight 460 kg Number of tool pockets 16 Spindle taper BT40 Max. spindle speed 8000 rpm Spindle motor power 11 kW ----- Length x width x height 2870.0 × 2246.0 × 2743.0 Weight 3410 kg

Condition: used, Year of construction: 2014, Mori Seiki NMV 3000 DCG 5 Axis CNC Milling Machine with Mori Seiki F31IAS CNC Control, 350mm Work Area/Bed, 120 Position ATC, BT40 Spindle Taper, Hydrajet WP10-1000 High Pressure Coolant System, ConSep Swarf Conveyor. S/No. V3010111005 (2014). Country of Origin: Switzerland Location: These lots are located in York, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described. Bcjdpjyfgbqjfx Abpeu

Condition: excellent (used), Year of construction: 2016, These machines are marketed as 2 opp machines and very good they are too but we consider them to be great little 1st opp machine in its own right. can be demonstrated Remarkable capacity for such a small machine. Machine has 6 tool holders Year: 2016 Control: ProtoTrak TMX Table Size: 457 x 381mm ‘X’ axis Travel: 355mm ‘Y’ axis Travel: 305mm ‘Z’ axis Travel: 455mm Spindle Speeds: 50 – 6000 RPM Spindle Taper: BT 30 Bodpfxoydvzds Abpscu Tool magazine capacity: 8 station Dimensions w x d x h: 760 x 1220 x 2585mm Weight: 1,100 kg can be demonstrated if required

Condition: excellent (used), Year of construction: 1997, Europa Centurion CU5 Ram Type Milling Machine (Like Huron) Excellent condition - we welcome any inspections! Year 1997 Specification - Table size 1635 x 460mm No of T Slots 5 Width of T slots 18mm Distance between slots 80mm Longitudinal travel 1300mm Vertical travel (knee) 440mm Cross Travel (ram) 650mm Min Spindle nose to table surface 40mm Spindle Taper 50INT No of spindle speeds 27 Spindle speed range 30-2050rpm Bodpsvm Abrjfx Abpecu Longitudinal powerfeed 10 - 1000mm/min Cross powerfeeds 10- 1000mm/min Vertical powerfeeds 5 - 500mm/min Longitudinal rapid feed 2800mm/min Cross rapid feed 2800mm/min Vertical rapid feed 1400mm/min Spindle motor 7.5kW Max Table load 1800kgs Dimensions - L 2010mm x W 2621mm x H1950mm

Condition: like new (used), Year of construction: 2006, Year 2006 Excellent condition Welcome to view prior to prior X-Axis- 450 mm Y-Axis - 300 mm Z-Axis - 350 mm Table Length - 800 mm Table Width - 400 mm Table load - 400 Bodpfx Abjwwk Tvopscu Spindle speeds - 2500 Rpm Feed rate X-Axis - 0-4000 mm/min. Feed rate Y-Axis - 0-4000 mm/min. Feed rate Z-Axis - 0-4000 mm/min. Feeds all 3 directions Heidenhain digital read out Motorised ram adjustment Milling and drilling pinole Removable housing

Condition: excellent (used), Year of construction: 1997, CNC travelling Column machine Table 10,000mm Length x 1100mm Width X Travel 8500mm Y Travel 1600mm Z (Ram Travel) 1200mm 60 Station tool changer Integrated horizontal & Vertical rotary table (CNC) Bcsdpfxex El E As Abpeu Spindle BT50 Spindle 20 - 2000RPM Siemens Sinumerik CNC Control

Condition: like new (used), Year of construction: 2016, Ajax AJUM 350 Horizontal Milling Machine Excellent condition - Like new! With Arbor & support arms Bsdpfxovm Amns Abpscu DRO Pendant control Year 2016 Manuals

Condition: used, Year of construction: 2001, Union KCU-130 Table Type Horizontal Boring & Milling Machine with Heidenhain TNC430 Control, X/Y/Z = 4000/3000/1500mm, Table Size 2000 x 2500 x 20,000kgs, B-axis 360 Deg, Spindle Taper BT50, 60 Position ATC, W-axis, U-axis, Swarf Conveyor, Through Spindle Coolant, Guarding Enclosure. S/No. 1370022 (2001) Bedpfex T Ddyjx Abpecu Please Note: Toolholders/Tooling photographed in the toolchanger will not be supplied with this machine. Any available tooling will be a specifically described. Please Note: This Lot is located in Irvine. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: ready for operation (used), controller manufacturer: Siemens, empty load weight: 55,000 kg, 2-koloms portaalfreesmachine tussen de kolommen: 2550 mm!! Bcodpfx Ajv Sfkasbpju 5-assige freeskop koeling door spindel totaal vermogen: 90 kVa Longitudinal travel X-axe: 8000 mm Cross travel Y-axe: 2500 mm Travel Z-axe: 800 mm Dimensions clamping space- table: 9000 x 2500 mm Max height workpiece: 1200 mm Power on spindle: 20 kW Power needed (KVA): 90 ACCESSORIES & TOOLING: toolchanger - 28 toolpositions

Condition: excellent (used), Model: F30 Bodjwif Rmspfx Abpjcu Table Area: 1625 x 800mm Fully Rotational Through Control Control: Heidenhain 426 ‘X’ Axis: 1800mm ‘Y’ Axis: 1150mm ‘Z’ Axis: 1370mm Spindle Taper: 50 INT Spindle Speeds: To 1800 RPM

Condition: like new (used), Year of construction: 2013, functionality: fully functional, Ficep 1201 DE Excalibur drilling machine for processing flat steel and profiles with longitudinally moving drilling unit. This machine has been completely cleaned and checked. The drilling machine has a numerically controlled, longitudinally moving drilling unit, X-axis, adjustment 0 - 15,000 mm, automatic tool change system with HSK A80 holder for 6 tool positions. Thanks to the 19 kW drill spindle drive, the drilling machine is suitable for use with carbide drilling tools. Technical details: Profiled and flat steel support with guide rail with fixed table Total length 15 m. Bsdpfjv Iamzsx Abpocu Mobile drilling unit for longitudinal positioning on workpieces. Horizontal drill head with one drill spindle Additional drill chuck storage in X-axis direction Clamping device for securing material Position detection device Profile size - max.: 1200 x 1200 mm Number of drill spindles: 1 pc. Drill diameter: 5 - 40 mm Thread cutting: M6 - M30 Drill spindle speed: 180 - 3000 rpm Holder: HSK A 80 Tool changer: 1 x 6 For further information, please contact us

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 5220511, travel distance X-axis: 2,600 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 4,000 rpm, workpiece weight (max.): 8,000 kg, TECHNICAL DETAILS Bsdpeygxgzofx Abpecu Travel X-axis: 2,600 mm Travel Y-axis: 1,000 mm Travel Z-axis: 1,000 mm Max. workpiece weight: 8,000 kg Table size: 3,600 x 900 mm Number of T-slots: 6 T-slot width: 22 mm T-slot spacing: 125 mm Spindle taper: ISO 50 DIN 69871 Spindle speed: 4,000 rpm (2 ranges: 0 - 1,000 rpm) Feed rate: 10 - 5,000 mm/min Rapid traverse: 10,000 / 10,000 / 10,000 mm/min MACHINE DETAILS Control: HEIDENHAIN TNC 426 Dimensions & Weight Space requirement: approx. 9.82 x 5.1 x 3.16 m Machine weight: approx. 21.5 t Motor Spindle drive motor: 29 kW Feed drive motor (Y-axis): 20 Nm Feed drive motor (X and Z-axis): 27 Nm Hydraulic motor: 2.2 kW Coolant pump motor: 0.50 kW Lubrication pump motor: 0.09 kW EQUIPMENT Tool changer Both head joints have 2.5°

Condition: excellent (used), Year of construction: 2010, feed length X-axis: 650 mm, feed length Y-axis: 500 mm, feed length Z-axis: 475 mm, table width: 450 mm, table length: 1,530 mm, table load: 350 kg, X-Axis: 650mm Y-Axis: 500mm Z-Axis: 475mm Table Length: 1530mm Table Width: 450mm Table load: 350 Spindle speeds: 55 - 4000Rpm Feed rate X-Axis:6000mm/min. Feed rate Y-Axis:6000mm/min. Feed rate Z-Axis:3000mm/min. Length: 2300mm Width: 2550mm Bsdpfx Absxtbkuspscu Height: 2200mm Weight: 2850kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, total height: 2,400 mm, total width: 1,850 mm, total length: 1,620 mm, Empty weight: 2.500 kg - Documentation available: No - CE certificate present: No - Serial number: 71235 Bcjdpfsx Npm Eox Abpou - Drive system: Conventional - Horizontal/vertical: Horizontal and vertical - Power [kW]: 8.5 - Number of axes [pcs]: 3 - X-axis travel [mm]: 600 - Y-axis travel [mm]: 400 - Z-axis travel [mm]: 400 - Table length [mm]: 900 - Table width [mm]: 500 - Tool holder: ISO40 - Main spindle power [kW]: 4 - Min. spindle speed [rpm]: 40 - Max. spindle speed [rpm]: 2000 - Options: Digital readout - └ Type of digital readout: Heidenhain - Transport dimensions: 1620mm x 1850mm x 2400mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1999, operating hours: 9,140 h, total height: 2,750 mm, total length: 2,620 mm, total width: 3,000 mm, Empty weight: 7.000 kg Price: On request - Year: 1999 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 906237 Bcodpfxsyf E U Ao Abpsu - Operating hours: 9140 - Drive system: CNC - Horizontal/vertical: vertical - Control system brand: Fanuc - Control system type: 18-M - Number of axes [pcs]: 3 - X-axis travel [mm]: 1020 - Y-axis travel [mm]: 520 - Z-axis travel [mm]: 630 - Table length [mm]: 1200 - Table width [mm]: 550 - Tool holder: BT40 - Main spindle power [kW]: 11 - Max. spindle speed [rpm]: 8000 - Options: External cooling - Transport dimensions: 2620mm x 3000mm x 2750mm (l x w x h) - Transport weight [kg]: 7000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum