Used Suction Dredger for sale (2,422)

Condition: used, mileage: 174,310 km, power: 130 kW (176.75 HP), first registration: 03/2012, overall weight: 15,000 kg, fuel type: diesel, color: orange, axle configuration: 4x2, maximum load weight: 6,200 kg, empty load weight: 8,800 kg, tire size: 10R22.5, wheelbase: 3,260 mm, brakes: engine braking, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel-air, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, cabin, differential lock, fog lights, low noise, onboard computer, power assisted steering, seat heater, traction control, Vehicle location: Bovenden, short cab, 1 comfort seat, rear window, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, 8-gear transmission, ABS (anti-lock braking system), traction control (ASR), constant throttle, auxiliary drive, raised exhaust, differential lock, fog lights, rotating beacon, leaf-air suspension, low-noise G1, U-guard, side aluminum fender, sweeping brush, sunroof, green environmental badge. Wheelbase: 3260 mm, Superstructure: Bucher sweeper, CityFant 6000 type, with sweeping brush on the right, approx. 6 m³ & JohnDeere auxiliary engine 4045 TF 63KW, right-hand drive, vehicle operating hours: 19277h, sweeper operating hours: 11366h! Sweeper superstructure: Gkjdpfszdvfbjx Akhod Bucher CityFant 6000 FB Twin Engine Auxiliary engine type: JohnDeere 4045 TF exhaust turbocharger 63KW Rear flap in stainless steel, brush plate 700mm, roller 400mm, suction hose at the rear 200mm, manual water valves in the driver's cab, road construction version with reinforced suction hoses, LED flashing and signal lights. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors!

Condition: refurbished (used), power: 30 kW (40.79 HP), type of input current: three-phase, input voltage: 400 V, rotational speed (min.): 3,500 rpm, Used Vakumix inline homogenizer with 30 kW, horizontal design on castors – for retrofitting to existing vessels and mixing plants. For homogenizing, dispersing and emulsifying in recirculation or single pass for cosmetics, pharma, food and chemicals. EQUIPMENT Godpfx Akoyf N Hvjhjkd • Drive power 30 kW, PLC controlled • Suction connection DN 100, discharge DN 80 • Front suction inlet DN 25 for liquids OVERHAULED • New control system • New frequency converter • All seals new incl. mechanical seal DELIVERY • Delivery time approx. 4 weeks, international shipping possible Inspection in Weyhe near Bremen, Germany, by appointment. Questions or more photos? Simply send us an inquiry. Offer subject to prior sale by an independent dealer, not affiliated with the manufacturer.

Condition: new, Year of construction: 2025, Suction nozzle diameter: 250mm Maximum volume flow: 5000 m³/h Nominal volume flow: 3534 m³/h Volume flow monitoring: Pressure difference display Filter area: 25.4 m² Residual dust content: less than 0.1 mg/m³ Sound pressure level: 70 db Scavenging bag volume: 480 l Filter cleaning: mororic Motor power: 5.5 kW Extinguishing device: yes Gkjdpepfat Esfx Akhjd Machine length: 3510 mm Machine width: 880 mm Machine height: 2545 mm Weight: 850 kg

Condition: as good as new (ex-display), Year of construction: 2025, Carriage length: 2500 mm Cutting width at the width stop: 1200 mm Cutting width at the cross-cut fence: 2500 mm Cutting depth: 100 mm Scorer: yes Height and tilt adjustment of saw blade: handwheel Width stop adjustment: manual Saw blade angle display: Scale Cutting height display: Scale Width stop display: Scala Cutting ruler display: Scala Saw blade diameter: 300mm Speeds: 4000 rpm Godpotpivksfx Akhjkd Motor power / saw: 4.4 kW Motor brake: yes / automatic Tiltable cutter arbor: yes 0 - 45° Milling arbor height and tilt adjustment: handwheel Milling arbor height and tilt indicator: Scale Milling arbor: 30mm Milling arbor speed: 3000 / 6000 / 7500 / 10000 rpm Max. Tool diameter: 180 mm Motor power / cutter: 4.4kW Suction connection: 100 mm, 100 mm, 80 mm Machine length: 2500mm Machine width: 1500mm weight: 530kg

Condition: used, Year of construction: 1999, Carriage length: 3800 mm Cutting width at the width stop: 1500 mm Cutting width at the cross-cut fence: 3200 mm Cutting depth: 140 mm Scoring unit: no Saw blade height adjustment: electric Swivel adjustment saw blade: electric Width stop adjustment: electric / position control Saw blade angle display: digital Cutting height display: - Width stop display: Digital Cutting ruler display: Scale Saw blade diameter: 400mm Speeds: 3 Motor power: 7,5kW Motor brake: Yes, automatic Suction connection: 80mm and 120mm Gkodpfevxi Ddex Akhjd Machine length: 3900mm Machine width: 2200mm weight: 1000kg

Condition: new, Year of construction: 2022, Working width: 630 mm Planing height: 300 mm Planing shaft: Tersa Number of knives: 4 Height adjustment: electric display planing thickness: mech. counter Feed speed: 5 / 8 / 12 / 18 Feed roller: steel Pressure beam: jointed Extraction roller: Rubber table rollers: no Gksdpfol D Rxbex Akhed Engine power: 9 kW suction connection: 150mm Machine length: 1200mm Machine width: 1200mm Weight: 810 kg

Condition: good (used), Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, welding fume filter, welding fume extraction, flue gas extraction fan, filter system Cartridge dust extraction system -Manufacturer: TEKA, filter system for extraction system including control unit with frequency converter -Type: ZPF9 -Cartridge filter: see photos -Inlet/Outlet: Ø640 mm / Ø640 mm -Extraction capacity: up to 20,000 m³/h -Note: A filter unit only, without a suction fan, can be supplied for an additional charge (ID38772) Gkodpfx Akszukp Aohsd -Dimensions: 1840/1475/H2670 mm -Weight: 689 kg

Condition: used, mileage: 105,000 km, power: 110 kW (149.56 HP), first registration: 03/2018, fuel type: diesel, overall weight: 3,500 kg, color: orange, gearing type: mechanical, emission class: euro6, number of seats: 3, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, Int. No.: 231 Very well-maintained NISSAN with KAISER superstructure * NISSAN NT 400 * 4x2 wheel configuration * Permissible weight 3500 kg * Leaf spring suspension * Manual transmission * 3-seater Gsdpfxezu Ukko Akhjkd * KAISER suction and pressure combination cleaning unit * Dietmar Kaiser Defco Combi * Vacuum pump 324 m³/h * HD pump 100 l/min, 150 bar * Boiler volume 765 L + 660 L * Radio remote control for superstructure * Differential lock * Radio * Tow hitch 3500 kg * Very good condition * VAT can be shown separately * Net price 49,900 € Trade-in possible Financing available from 4.99% Errors and prior sale excepted! The information in this advertisement is a non-binding description and does not constitute guaranteed features. The seller assumes no liability for typographical and data transmission errors. Listed equipment should be checked separately. All information in the advertisements is non-binding! Delivery throughout Germany upon request Opening hours: Monday to Thursday from 9:00 a.m. to 5:00 p.m. Friday from 9:00 a.m. to 2:00 p.m. and by appointment!!!

Condition: used, first registration: 07/1980, suspension: other, color: grey, gearing type: mechanical, , Otto Klein water barrel vacuum barrel capacity 4.000 l year of construction 1980 suction hose pump overhauled hydraulic opening/closing immediately ready for use FOR US THE CONDITION AND THE FEEL OF THE CONSTRUCTION IS DECISIVE, THE PRICE IS IN SECOND PLACE For further questions please contact Mr. Faller at the number. //*EXCHANGE, PAYMENT ACCEPTANCE OR RENTAL OF YOUR VEHICLE, AS WELL AS FINANCING POSSIBLE! All information without guarantee* You can find further offers on our homepage: The description and data given do not constitute a guarantee and are not binding. The contract of sale concluded at the dealership when the vehicle is purchased is binding. Subject to errors and prior sale! Gksdet Aikuopfx Akhod

Condition: good (used), Year of construction: 2010, machine/vehicle number: 6907210011627, Offer 26325 Technical data: - Mobile extraction system with articulated extraction arm - Suitable for the extraction of welding fumes during welding of - Steel + stainless steel + aluminum + unalloyed or galvanized steels - Welding fume class W3 - Articulated extraction arm 360° 4000 mm - Max. fan flow rate approx. 1600 m³/h - Max. static pressure 1800 Pa - Particle separator: coarse filter, pre-filter - Main particle separator: main filter - Gas separator: activated carbon filter - Drive - Fan 220 V / 1.10 kW Godpfx Ako Ai T E Sshokd - Space requirement approx. B 600 x H 900 / 2450 x D 600 mm - Weight approx. 80 kg - Recorded operating hours 85 h

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, filter area: 84 m², suction capacity: 9,700 m³/h, negative pressure: 3,800 Pa, input frequency: 50 Hz, Equipment: type plate available, Dust extractor, welding fume extractor, self-cleaning cartridge filter, pneumatic, vacuum-based, for plasma, laser, sandblasting, soda blasting, shot blasting, and for all types of dry dust. Gkjds Ai S Skopfx Akhjd Brand: ESTA Model: DUSTEX F-84 The filter is cleaned with pulses of compressed air during operation, ensuring high device efficiency. The fan is located on the clean air side, minimizing the risk of explosion. Parameters: Max. capacity – 9700 m3/h Max. vacuum – 3800 Pa Filtration area 84 m2 Cartridge filter inserts – 4 pcs. Motor power 7.5 Kw. Inlet diameter – 350 mm Device dimensions: Height – 3.38 m Width – 1.38 m x 1.34 m Base – 1.05 m x 1.05 m Stock number: 0031

Condition: used, mileage: 9,990 km, power: 140 kW (190.35 HP), color: blue, gearing type: automatic, number of seats: 6, Equipment: ABS, air conditioning, central locking, power assisted steering, - To ensure you receive the best possible advice from us, please schedule an appointment. Mr. Kiel will be happy to assist you, Tel: C70 Pedestrian protection, CF7 Comfort suspension, CL1 Steering wheel adjustable for inclination and height, CL4 Multifunction steering wheel with trip computer, E07 Hill start assist, E1D Digital radio (DAB), E34 Buffer battery for starting process, E3C Audio 30, ED4 Fleece battery 12 V 92 Ah, EL8 2-way speakers in the front, EY5 Mercedes-Benz emergency call system, EY6 Breakdown assistance, F61 Interior mirror, F66 Lockable glove compartment, F68 Heated and electrically adjustable exterior mirrors, G43 9G-TRONIC, H00 Warm air duct to the passenger compartment, H20 Heat-insulating glass all around, HH9 Semi-automatic TEMPMATIC climate control system, JW8 ATTENTION ASSIST, JX2 Service interval 40,000 km, KP7 Exhaust gas purification SCR Generation 4, LA2 Driving light assistant, LC4 Comfort roof control unit, LD9 Interior lights in the rear, LE1 Adaptive brake light, LX5 Europe, M3E Suction fan, electric, power level 5, M60 Generator 14 V / 250 A, MG9 Generator management, MJ8 ECO Start-Stop function, MO6 Emission class Euro 6d M/N1 GR. II, MS1 TEMPOMAT, MU6 OM 654 DE 20 LA 140 kW (190 PS) 3800/min, Q50 Trailer coupling, ball head, detachable, QA4 Trailer load 2500 kg, RS7 Steel wheels 6.5 J x 17, RY2 Tire pressure monitoring on front and rear axles, wireless, S23 Front passenger seat, single seat, SA6 Airbag, front passenger, SB1 Comfort driver's seat, SE5 Lumbar support, driver's seat, T14 Active locking mechanism for sliding door, T70 Child safety lock on doors in the passenger compartment, U71 3-seater bench seat, 1st row with foldable outer seat, UR3 Rear seat configuration with quick-release system, 2 seat rows, V30 Interior lining, load compartment, side, V43 Wooden floor, VD2 Roof lining standard, pillar B-D, VF4 Fabric Caluma black, VV9 Mounting points in the roof frame, W16 Window, front left, fixed in the side wall/sliding door, W17 Window, front right, fixed in the side wall/sliding door, W29 Window, fixed, rear, W65 Tailgate, W78 Window in tailgate with wiper and washer system We would be happy to provide you with an offer for the trade-in of your used vehicle. If you would like to lease or finance your vehicle, we will be happy to provide you with a customized offer. Errors and prior sale are subject to change. Mr. Kiel will be happy to assist you. ESP, particulate filter, new TÜV inspection = Further information = Gsdeyfrv Topfx Akhokd Year of construction: 2021 Intended use: Goods transport Engine displacement: 1,950 cc Engine brand: Diesel Please contact Tobias Ebert for further information.

Condition: used, Year of construction: 2013, Hermle C400U Operating hours: Operating hours: 29,500 h Spindle since replacement: about 3,000 h Control: Heidenhain TNC530 Travel: X-850 mm, Y-700 mm, Z-500 mm Gkodpfx Ae Ai Iu Ajkhod A-axis: C-axis: 360 Spindle speed: 18.000 U/min Spindle mount: HSK-63A tool magazine: 38 pos. NC swivel table: 650 mm diameter chip conveyor: Yes Bleed-off device: Yes Electrical heat compensation: Yes probe: Renishaw Tool measurement: BLUM A2 suction: Yes electric handwheel: Yes

Condition: new, Year of construction: 2025, Suction nozzle diameter: 350mm maximum volume flow: 8000 m³/h nominal volume flow: 6927 m³/h negative pressure: 2600 Pa at 21,4 m/s in dusty condition Volume flow monitoring: pressure difference display Filter area: 31.8 m² Residual dust content: less than 0.1 mg/m³ Sound pressure level: 72 db Gsdpfx Aopfat Tjkhekd Chaff bag volume: 640 l Filter cleaning: mororic Engine power: 11 kW Extinguishing device: yes Machine length: 4165 mm Machine width: 1270 mm Machine height: 2595 mm Weight: 900 kg

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, - High-pressure cleaner PTC Torpedo Compact 21/250, 21/350, and 15/500, similar to but not a Dynajet, Oertzen, Falch, etc. - Cold water/hot water up to approx. 95°C and steam at 32 bar up to 140°C + high-pressure steam up to 150°C at 200 bar (only in version 16/350 PS with POWERSTEAM / high-pressure steam) and chemical-free weed control function with approx. 99°C (only in version 23/350). Gksdpedqkrwofx Akhjd The following models are available: - Torpedo Compact 23/350 | 23 l/min. at 350 bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter - Torpedo Compact 16/350 PS (high-pressure steam) | 16 l/min. at 350 bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter - Dimensions and dry weight without water tank: 1205x1250x1330 mm, approx. 280 kg - Dimensions and dry weight with 300 l water tank: 1250x1900x1330 mm, approx. 350 kg - Dimensions and dry weight with 500 l water tank: 1250x1900x1330 mm, approx. 350 kg - 80/100 kW diesel burner with electronic temperature control - High-pressure pump: Comet RW/TW three-plunger pump with ceramic plungers - Operating hour counter - Manometer - Pressure regulator - Safety valve - High-quality frame made of painted steel with forklift slots - Covers made of stainless steel - Magnetic descaling device - incl. 20 m high-pressure hose, spray gun, lance, and flat jet nozzle 25° - Other accessories such as a frame for the water tank, water tank 300 or 500 l, water-sandblasting kit, surface cleaner, rotary nozzle, sludge suction pump, steam nozzle, weed control lance and bar available on request.

Condition: excellent (used), pressure: 3 bar, temperature: 134 °C, type of input current: three-phase, input voltage: 400 V, usable tank capacity: 2,500 l, Used Becomix production plant consisting of main mixer RW2500 and pre-mix vessel AB1200 for mixing, dispersing, homogenizing and emulsifying on an industrial scale. Originally used for sterile skin care products. Very good condition, complete overhaul in our own workshop planned (new seals, piping, pneumatics and control, homogenizer and drives overhauled), new stainless steel platform included. MAIN MIXER RW2500 Gedpfj Ad H Iqjx Akhjkd • Working volume approx. 600–2,500 L, total volume approx. 3,458 L, 316L mirror polished • 0–3 bar, vacuum to -1 bar, up to 134 °C, jacket, TÜV approved • Anchor agitator with PTFE scrapers approx. 30 kW, rotor-stator homogenizer approx. 45 kW (5–25 m/s) • Recirculation line DN100, hydraulic lid PRE-MIX VESSEL AB1200 • Working volume approx. 400–1,200 L, turbo agitator, two-zone heating, transfer line FURTHER EQUIPMENT • CIP for both vessels incl. CIP rack, CIP/SIP capable, aseptic valves • Water ring vacuum pump approx. 200 m³/h, powder suction and liquid dosing • New Siemens PLC with touch panel, recipe control, GMP documentation SERVICE • Turn-key installation and commissioning available • 12 months warranty (excluding wear parts) Inspection in Weyhe near Bremen, Germany, by appointment. Questions or more photos? Simply send us an inquiry. Offer subject to prior sale by an independent dealer, not affiliated with the manufacturer.

Condition: reconditioned (used), pressure: 2 bar, temperature: 133 °C, power: 45 kW (61.18 HP), type of input current: three-phase, input voltage: 400 V, usable tank capacity: 125 l, rotational speed (max.): 82 rpm, rotational speed (min.): 19 rpm, Used Symex CML125 vacuum homogenizer mixer in pharma design, overhauled in our workshop with new seals. Complete process unit for mixing, dispersing, homogenizing, emulsifying, heating, cooling and vacuum – ideal for creams, ointments, gels and pastes in pharma, cosmetics and food. EQUIPMENT • Scraper agitator with PTFE scrapers and 2 baffles, for products up to approx. 100,000 mPas • Bottom homogenizer Symex HFDA 250, forward/reverse, double mechanical seal SiC/SiC • Large and small recirculation DN50, direct powder and liquid suction • CIP with rotating spray heads (Toftejorg), hydraulic lid lift • Liquid ring vacuum pump, temperature control unit (steam / cooling water) Gkjdpfx Akeyf N H Ashsd • Siemens S7-300 with touch panel, batch control, trend recording • Documentation incl. manuals, wiring diagrams, test certificates; PED / AD2000 SERVICE • Turn-key installation and commissioning available, optional IQ/OQ • 12 months warranty (excluding wear parts) Inspection in Weyhe near Bremen, Germany, by appointment. Questions or more photos? Simply send us an inquiry. Offer subject to prior sale by an independent dealer, not affiliated with the manufacturer.

Condition: new, Year of construction: 2025, Working width: 410 mm Planing shaft: Tersa Number of knives: 4 Planer table length: 2000 mm Dressing fence angle adjustable: yes 45° to 90 Maximum passage thickness of thickness planer: 250 mm Height adjustment of thicknessing table: electric Planer thickness display: digital display Gkodpfx Akol D Rwtehed Feed speed: 6/12 m/min Infeed roller: Steel Pull-out roller: steel Table rollers: no Motor power: 4.5 kW Motor brake: yes, automatic Suction connection: 120mm Machine length: 2000 mm Machine width: 882 mm weight: 615 kg

Condition: used, functionality: limited functionality, For sale: FLYGT 2102.040 submersible pump with a 3.7 kW three-phase motor. The pump is used and shows visible signs of wear. Its visual condition is shown in the photos. Technical data from the nameplate: Manufacturer: FLYGT Type: 2102.040 Motor power: 3.7 kW Power consumption: 4500 W Supply voltage: 380 V – star / 220 V – delta Gkode Akdvgepfx Akhed Rated current: 7.5 A / 13 A Power supply: three-phase, 50 Hz Rotational speed: 2850 rpm The pump is equipped with a suction strainer, a carrying handle, a power cord, and an outlet elbow with a hose connection. The item for sale is the pump shown in the photos.

Condition: used, Thermo Fisher ARCTIC A25 Gkedpfx Akszgcgdohjd Technical data: Controller type: SC150 Capacity: 12 l Communication: RS232, RS485, Ethernet/LAN, analog I/O Cooling capacity: 500 W Flow rate: 17 l/min Pump type: Pressure pump, suction pump Temperature range: -25°C to +100°C Max. pressure: 300 mbar Temperature stability: 0.02°C Dimensions (L x W x H): 48.3 x 27.3 x 71.1 cm Length: 48.3 cm Internal length: 18.4 cm Width: 27.3 cm Internal width: 17.3 cm Height: 71.1 cm Internal depth: 20.4 cm Weight: 36.1 kg Electrical requirements: 230 V 50 Hz Voltage: 230 V Frequency: 50 Hz Condition: used Scope of delivery: (See images as shown) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, Leybold Type: Trivac D 40 B Godjzianwjpfx Akhekd The TRIVAC B series are oil-sealed rotary vane vacuum pumps. The oil injected into the pumping chamber serves as a sealant, lubricant, and coolant. The pump housing is made up of individual parts without sealing elements. These parts are pinned together to ensure easy disassembly and assembly. Ultimate pressure: 2 x 10⁻³ mbar Motor: 3-phase, 230/400 V, 50/60 Hz Pumping speed (50 Hz): 40 m³/h Pumping speed (60 Hz): 48 m³/h Environmentally friendly: Quiet Vibration-free operation, energy-saving Energy-saving: Low power consumption Low heat dissipation Modern vacuum technology: High pumping speed up to the ultimate pressure Low ultimate pressure, even with gas ballast High water vapor tolerance Continuous operation even at 1000 mbar Built-in oil pump, force-lubricated plain bearings Minimal air swallowing High leak tightness (4He-compatible) Technical data: Product: TRIVAC D 40 B Suction flange: DN 40 ISO-KF Discharge flange: DN 40 ISO-KF Nominal pumping speed at 50 Hz: 46.0 m³/h Nominal pumping speed at 60 Hz: 55.0 m³/h Pumping speed at 50 Hz: 40.0 m³/h Pumping speed at 60 Hz: 48.0 m³/h Ultimate partial pressure without gas ballast: 1.0 x 10-4 mbar Ultimate total pressure without gas ballast: < 2.0 x 10-3 mbar Ultimate total pressure with gas ballast: < 5.0 x 10-3 mbar Water vapor tolerance at 50 Hz: 40.0 mbar Water vapor tolerance at 60 Hz: 40.0 mbar Water vapor capacity at 50 Hz: 1,184 g/h Water vapor capacity at 60 Hz: 1,184 g/h Operating fluid volume: min.: 1.7 l max.: 2.6 l Sound level according to DIN 45 635 without gas ballast: 57 dB(A) with gas ballast: 59 dB(A) Mains connection: 3-phase, 200 / 200-240 / 380-400 V ±10%, 50 Hz 3-phase, 200-240 / 380-480 V ±10%, 60 Hz Motor power: 2.2 kW Motor speed at 50 Hz: 1,430 min⁻¹ Motor speed at 60 Hz: 1,735 min⁻¹ Motor protection: IP 55 Permissible ambient temperature: +12 to +40°C Weight: 73.0 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and information are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, mileage: 25,900 km, power: 375 kW (509.86 HP), first registration: 01/2023, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, gearing type: automatic, Year of construction: 2023, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, * Mercedes Benz Arocs 3251 suction excavator * First registration: 01-2023 * Suction excavator MTS Dino 12 * Stainless steel cladding * Hydrostatic drive for suction, driving, and steering * Articulated boom EVO Power ARM Gen2 * 2 x turbine * Operating hours turbine: 1,058 h * Operating hours compressor: 943 h * DINO 12m³ container * Stainless steel lining throughout * Articulated boom EVO-POWER ARM GEN2 * Rotary suction pipe system IKE/PERFOR * Hydrostat-RPM15 * Full cladding DESIGN * High-pressure water system 30 l/min * Hydraulic oil, biodegradable * Aluminum fenders * Storage box made of stainless steel on the frame * Container with 2 pneumatic vibrators * Ladder under the hose rack Gedpoz I Ic Djfx Akhjkd * Light package I: 3 LED lights on the vehicle frame * Light package II: 2 LED lights on the central joint of the articulated boom * Light package III: LED light strips in the tool box * Light package IV: Cable reel * Light package VIII: Light bar at the rear * 4 warning lights (switchable at the rear) * Anti-slip coating on the lid * Ball head trailer coupling 3.5t * More pictures and videos via WhatsApp * Subject to change and prior sale. No guarantee.

Condition: new, Year of construction: 2026, Weima Hacker / Shredder WL 8 with Top Features - 2nd knife row, log spacer, 4-sided segment base, discharge auger with gear motor, Fast reverse hydraulics with shock valve The single-shaft shredder WL 8 is a proven classic for shredding wood waste of all kinds. It is used, for example, thousands of times in woodworking companies worldwide. The high number of these highly sought-after shredders guarantees proven and reliable technology at the best price-performance ratio. The machines are characterized by their very robust design, which ensures extremely high durability (even outdoors). Intuitive operation thanks to Siemens PLC control with touch display To ensure that the electronics are optimally adapted to the machine, we design, build and wire our control cabinets ourselves. We use only high-quality components – for example, from Siemens or Rittal. Intuitively operated touch surfaces guarantee quick adjustments. Functions such as adjusting the slide timing or stop ensure a high throughput. The built-in overload protection also prevents damage to the machine. No material bridging due to self-cutting hopper design The hopper performs several tasks at once. First, the material to be shredded is fed into it – manually, mechanically or via a conveyor belt. The generous opening also makes it easy to fill very large parts. However, its special design, which is rounded at the front and thus effectively prevents material bridging, is crucial for the shredding process. Even with bulky parts, the shredder cuts itself free. If required, both hopper extensions and lids with gas spring are available. Durable rotor bearings thanks to offset design A rotor bearing must be particularly robust due to its extreme stress during the shredding process. To prevent dust or foreign objects from entering it, we have separated it from the machine frame. This also makes it very easy to maintain and access. Rotor diameter (mm): 260 Rotor length (mm): 1000 Rotor speed (RPM): 80 - 125 Power (kW): 22 Number of knives: 54 Available knife sizes (mm): 40 x 40 Grain size (mm): 15/20 mm or according to customer requirements Suction nozzle (mm): 200 Feed opening (mm): 1000 x 1250 Length (mm): 2045 Width (mm): 1740 Height (mm): 1840 Weight (approx. kg): 2200 Accessories: - 2nd knife row Gksdpopdqzxefx Akhjd - Log spacer - 4-sided segment base - Discharge auger with gear motor - Fast reverse hydraulics with shock valve - Screen size 15/20 mm List price: €52,320, sold at a special price Location: In stock at 54634 Bitburg - available immediately - The pictures show a machine without a discharge auger; one will be available in stock.

Condition: new, Year of construction: 2026, Motorized planer table with two speeds Digital display for work height Planer table made of gray cast iron The planer table is supported on four large trapezoidal thread spindles for maximum stability and precision Four feed speeds Optional with two rollers in the planer table Standard with noise and chip protection curtain at the workpiece infeed and outfeed Roller pressure adjustable Front infeed roller with helical teeth Outfeed roller with rubber coating Powerful industrial motor Equipment details TERSA models with Tersa planing cutter shaft Planing cutter change in seconds When the machine starts, the planing cutters are automatically tensioned by centrifugal force - self-locking The cutter overhang adjusts automatically without the use of setting gauges Gkodpfoff Efajx Akhsd Work table The work table is supported on four large trapezoidal thread spindles, which ensure maximum stability under all working conditions Standard with electric table adjustment Due to the special lifting device, the table position is maintained perfectly even without locking Helically toothed steel infeed rollers for a constant and uniform wood feed Second, rubber-coated feed roller at the outfeed Solid anti-kickback devices prevent workpiece kickback A 4-cutter shaft ensures an optimal planing result Dimensions and weights Length approx. 1305 mm Width/Depth approx. 1080 mm Weight approx. 750 kg Dust extraction connection Suction nozzle diameter, thickness 150 mm Drive power Main motor 9 kW Installation information Space requirement, length 1305 mm Space requirement, width/depth 1080 mm Space requirement, height 1197 mm Explanation of space requirement: The dimensions take into account maximum travel distances or usable lengths. Machine body length 1305 mm Machine body width/depth 725 mm Length 1000 mm Width 2000 mm Explanation of work area: Please add the specified dimensions to the space requirement to obtain the recommended free installation area for the machine. Thickness Planer table length 630 mm Planer table width 1000 mm Work height min. 3.5 mm Work height max. 300 mm Work length min. 210 mm Chip removal max. 8 mm Electrical data Connection voltage 400 V Phase(s) 3 Ph Current type AC Mains frequency 50 Hz Planing cutter shaft Type TERSA Diameter 120 mm Number of planing cutters 4 pcs Speed 4500 min⁻¹ Planing width max. 630 mm Feed Speed 5/8/12/18 m/min Location: In stock, 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2017, ++ without ST package ++ can be purchased separately CNC-CONTROLLED MACHINING CENTER KEY FEATURES "PRO-SPACE" SAFETY DEVICES: SAFE AND COMPACT "HE" TABLE - FOCUS: EFFICIENCY AND SAVINGS TECHNICAL DATA AXES Pratix S22 Working area in X-Y-Z axis * mm 22-43 = 4286-2155-150 Travel X-Y-Z axes mm 22-43 = 4970-2585-250 Travel speed of X-Y axes m/min 35 WORK TABLE Type Multifunction table made of aluminum Stops for "A" working area pcs 4 Vacuum pump (Opt.) m³/h 90/108 - 250/300 Gkjdpsz Ebzhjfx Akhod DRILLING UNIT Vertical spindles No. – rpm 7 (5X-3Y) 6,000 – 12 (8X-5Y) 6000 Horizontal spindles (Opt.) No. – rpm 4 (2X-2Y) 6,000 – 6 (4X-2Y) 6000 Integrated saw blade in X (Opt.) Ø mm – rpm 120 – 7500 Motor power kW (HP) 2.2 (3) ELECTROSPINDLE Motor power Std. (S6) kW (HP) 6.6 (9) – 9.5 (13) Max. speed rpm 24000 Side tool changer 13 positions INSTALLATION Installed power kVA 23÷28,5 Compressed air requirement l/min 400 Extraction air requirement m³/h 5300 Extraction air speed m/sec 30 Extraction nozzle diameter (electrospindle + drilling unit + kit) mm 250 Machine weight kg 22-43 = 3200 * X Distance between stops - Y Max. panel width - Z Workpiece passage Only electrospindle or electrospindle + drilling unit: diameter 200 mm; extraction air requirement 3400 m³/h In conjunction with the slider for panel output, the extraction nozzle diameter is always = 250 mm GENERAL FEATURES CNC-controlled machining center for processing panel materials. Self-supporting structure and work table Box structure made of cold-rolled steel, consisting of rectangular sections that are welded together; multifunction work table made of aluminum with a single working area. Holes in a 120 mm grid for vacuum connection, can be easily removed using a magnetic device (patented system). The entire surface is grooved at a distance of 20 mm so that the workpieces can be clamped using rubber seals, MODULSET or suction cups. Automatically retractable reference stops that ensure accurate positioning of the workpieces to be processed. Moving gantry This is a gantry structure made of cold-rolled steel in a box design, consisting of right-angled sections. The working units are installed on the gantry. Working unit consisting of a drilling head with vertical spindles, horizontal spindles, an integrated grooving and sawing unit and an SCM electrospindle with a tool quick-change system type HSK63F. Travel paths of the gantry and the unit carrier The movement in the X, Y and Z axis takes place on linear prismatic recirculating ball guides with the help of pre-tensioned Movement transmission of the X and Y axes (moving column and carriage) takes place via a reduction gearbox with rack and pinion drive and oblique The movement of the unit carrier in the Z direction takes place via pre-tensioned Positioning of the working units and control of the machine functions takes place via "Brushless" three-phase servomotors and digital CONTROL The control unit consists of a numerical control for milling and drilling machines and a user interface with remote control with a 7" touchscreen color screen. The Xilog Maestro machine operating interface offers optimal communication between operator and the machine for all programming functions.