Used Swiss Lathe for sale (5,599)

Condition: used, Year of construction: 2011, turning diameter over bed 350 mm turning diameter over slide rest 216 mm turning length 1000 mm turning diameter in the gap 550 mm turning speeds 40 - 1800 U/min centre height 170 mm spindle bore 40 mm total power requirement 4,0 KW weight of the machine ca. 0,7 t dimensions of the machine ca. 2,0 x 0,85 x 1,6 m Centre lathe (lead screw and feed rod) - Digital readout - 3-jaw chuck (160 mm) - Spare jaws - Coolant system - Multifix tool post - 4 Multifix tool holders - Steady rest - Live centre - Chip tray - Chuck guard Rcodpfozlkvqjx Abuoh

Condition: good (used), Year of construction: 2008, Colchester Harrison Alpha 1400U CNC lathe Footprint: 1.7 x 3.1 m Height: Approx. 1500 mm Weight: 3200 kg Equipment: Electrically interlocked chuck guard, full safety guard, coolant tank and pump 100 l, fully extendable chip tray, machine lighting Machining length: 1250 mm Turning diameter: 400 mm Center distance: 1250 mm Spindle bore: 54 mm Turret, number of tools: 8 Tool size: Standard: 20 x 20 mm Boring bar: 32 mm Redpfjrnkdyjx Abusch No responsibility is taken for the correctness, completeness and up-to-dateness of the information.

Condition: excellent (used), Star SA-12 Swiss-Type Lathe Technical Specifications Rapid feed (X, Y, Z, ZB): 370 mm Maximum turning feed (X, Y, Z, ZB): 270 mm Smallest input unit (X, Y, Z, ZB): 120 mm Machining Capacity Maximum turning diameter: 13 mm Maximum headstock stroke: 140 mm Maximum drilling capacity: 7 mm Maximum tapping capacity: 7 mm Maximum thread cutting capacity: M6 x P1.0 Main Spindle Spindle speed: 500 – 12,000 rpm Drive: Spindle drive Main spindle motor: 2.2 / 3.7 kW Main spindle indexing angle: 1° or 15° Main spindle bore: 20 mm Tool slide Type: Linear slide Number of tools: 6 tools Number of driven tools: 3 tools (collet: ER 11) Driven tools Spindle speed: 1970 / 2330 rpm Max. drilling capacity: 4 mm Max. milling capacity: 4 mm Pick-up spindle Max. clamping diameter: 13 mm Max. part length for forward ejection: 85 mm Max. unclamping length: 30 mm Spindle speed: 500 – 8000 rpm Pick-up spindle motor: 0.5 kW Tool selection: 4 tools Max. drilling capacity: 4 mm Max. tapping capacity: M3 x P0.5 Power supply Redpfswi Ty Aox Abujch Voltage: 3-phase 200/220 V Frequency: 50/60 Hz Power: Average: 6.0 KVA SCOPE OF OFFER Among other things: (list not exhaustive): STAR SA-12 Swiss-Type Lathe Control: Fanuc Series 18i-T Fire Extinguishing System Coolant Tank Transformer LNS Bar Loader Exact scope of supply as per photo gallery No liability is assumed for the accuracy, completeness, or timeliness of the information.

Condition: excellent (used), Year of construction: 2015, Okuma GENOS L200E-MY CNC Lathe Technical Data Manufacturer: Okuma Model: GENOS L200E-MY Control: OSP-P300L-R Voltage: 400 V Phases: 3 P Frequency: 50/60 Hz Connected load: 15.3 kVA Rated current: 25.6 A Short-circuit withstand capacity: 2.5 kA Max. turning diameter: Ø 200 mm Max. turning diameter x length: Ø 200 x 380 mm Swing over bed: Ø 450 mm Swing over cross slide: Ø 300 mm Workpiece weight (single-sided support): 120 kg Spindle diameter: Ø 100 mm Spindle nose: JIS A2-6 Spindle bore: Ø 66 mm Spindle speed range: stepless Spindle speed: 75 to 3000 rpm Number of tool stations: 12 Turret type: Multitasking V12 turret Tool holder, external turning tools: 20 x 20 mm Tool holder, internal turning tools: Ø 32 mm Rotating tool speed: 6000 rpm Travel (Z-axis): 400 mm Redpfx Aey R A N Aebuoch Travel (X-axis): 165 mm Travel (Y-axis): 80 mm Feed range: 0.001 to 1000 mm/rev Rapid traverse Z-axis: 25000 mm/min Rapid traverse X-axis: 20000 mm/min Rapid traverse Y-axis: 10000 mm/min Tailstock quill diameter: Ø 55 mm Tailstock quill stroke: 80 mm Machine height: 2040 mm Footprint: 2120 x 1750 mm Machine weight: 4800 kg Year of manufacture: 2015 No guarantee is given for the correctness, completeness or up-to-dateness of the information provided.

Year of construction: 2006, condition: excellent (used), STAR ECAS 32 T CNC automatic lathe - Very good condition - Many accessories available - Detailed photo gallery included in PDF catalog TECHNICAL DATA Max. Machining Diameter: 32 mm Max. Headstock Stroke: 350 mm Tool Post: First Turret: 10 stations Second Turret: 10 stations Number of turning tools: Max. 2 tools / station Tool shank: 16 mm Sleeve Holder: Number of tools: Max. 3 tools / station Max. Drilling Capacity: 23 mm Rsdpfxel R Ix Se Abuech Max. Tapping Capacity: M12 X P1.75 Max. Die Cutting Capacity: M12 X P1.75 Power Driven Att. Number of Tools: Max. 2 tools / 1 station Max. Drilling Capacity: 10 mm Max. Tapping Capacity: M8 X P1.25 Max. Milling Capacity: 12 mm Max. Slotting Capacity: 2 mm X 10 mm Main Spindle min. indexing degree: 0.01° Main Spindle Speed: 7`000 rpm Power Driven Att. Spindle Speed: 5`700 rpm Coolant Tank Capacity: 230 l Dimensions: 3175 x 1745 x 1860 mm Center Height: 1084 mm Weight: 5`700 kg Power Consumption: 8.0 KVA No responsibility is taken for the accuracy, completeness and timeliness of the information.

Condition: good (used), Lathe Length: 1750 mm Motor power: 3 kW Voltage: 380 volts Location: available from warehouse 54634 Bitburg - immediately available - Rodpfji Akv Sox Abujch

Condition: used, Year of construction: 2008, operating hours: 18,349 h, turning length: 1,000 mm, turning diameter: 340 mm, spindle speed (max.): 4,800 rpm, Produced in 2008, cutting time 18,349 h, OSP P200L, 4-axis double turret VDI40, A-turret VDI40 V12 with live tools, B-turret VDI40 V8, turning diameter 340 mm, turning length 1000 mm, standard spindle bore, main spindle 4800 rpm, tailstock, manual, touchsetter, chip conveyor, coolant station, in good working and geometric condition, optional tools available. Rodpfeyu N Uxox Abuech

Condition: new, mileage: 45 km, power: 129 kW (175.39 HP), fuel type: diesel, empty load weight: 3,655 kg, maximum load weight: 4,895 kg, overall weight: 8,550 kg, axle configuration: 4x2, wheelbase: 3,400 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: other, number of seats: 3, total length: 5,700 mm, loading space length: 4,000 mm, loading space width: 2,000 mm, loading space height: 400 mm, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, hydraulics, immobilizer system, onboard computer, soot filter, trailer coupling, Fuso 9C18 Duonic City Roll-off Tipper, available in approximately 4-6 weeks, also available for rent with a purchase option. - Speed limiter set to 40 km/h for Switzerland. - Containers in various designs can be ordered as an option, starting from approximately 3500 EUR. - Gross vehicle weight: 8550 kg, unladen weight: 3655 kg, payload without container: 4895 kg. - Weight reduction to a gross vehicle weight of 7.5 tons possible, payload then approximately 3850 kg. - Automatic transmission (Duonic) - Differential lock with limited slip - Batteries 2 x 100 AH - Trailer coupling, ball hitch 3500 kg with electrical kit (factory-installed) - Heated exterior mirrors - Automatic climate control - Radio preparation - Reversing warning system - Auxiliary drive with increased speed, factory-installed Rcodpfxswv Ebxo Abueh - Battery cover and AdBlue tank cover - Preparation for battery disconnect relay - Traction tires (all-weather M+S) Continental - Seat covers - Optional installation: reversing camera, all-round lights, trim, net/strap box, etc. - Various containers available in stock or can be ordered - 3 years / 100,000 km factory warranty, Fuso is a brand of Daimler Truck AG Roll-off system mounted on Fuso 9C18 - Roll-off system for containers according to DIN 30722 Part 3 - Lifting/tipping capacity 6000 kg - Container length 3500-4000 mm - Hook height 900 mm - Hydraulic articulated hook arm (shallow lifting angle) - Hydraulic container locking (acceptance of third-party containers possible, safe container transport) - Mechanical hook lock - Cable remote control mounted on the A-pillar, operation possible outside the cab, in addition, mechanical emergency operation on the device - Emergency/off function - CE certificate and kit box - Final paint finish of roll-off unit: Black RAL 9005 / Rollers: Black RAL 9005 - Subject to errors and prior sale! - More information and additional XXL images can be found on our website: - For inquiries in English, please call ?si=3WuXgXxgPc5ChoBp ... Climate control, automatic climate control, automatic transmission, VAT can be shown separately, ABS, radio, on-board computer, cruise control, heated mirrors, electric windows, central locking with remote control, trailer coupling, power steering, limited-slip differential, tinted windows, tachograph, cab: day cab, air-suspended driver's seat, electric windows, auxiliary drive, new, emission class: Euro 6, diesel, rear-wheel drive, very good condition, HSN 7149, hydraulics, fuel consumption: 0.0/0.0/0.0 l/100 km (combined/urban/extra-urban), particulate filter, available for rent, particulate matter badge: 4 - Green.

Condition: new, Year of construction: 2025, functionality: fully functional, turning diameter over cross slide: 235 mm, spindle bore: 52 mm, turning diameter: 400 mm, center height: 200 mm, turning length: 1,000 mm, Lathes Series PREMIUM CU 400 RD-Vario Our universal lathes and lathes with stepless speed control from the PREMIUM CU series feature a wide range of features and accessories for customers across various industries. The PREMIUM CU series allows precise adjustment of cutting speed to suit material and turning diameter – especially advantageous for non-ferrous metals, plastics, and for achieving perfect surface finishes on precision parts and fits. A notable highlight is the integrated R/L control units mounted on the tool slides, enabling simple switching between clockwise and counterclockwise spindle rotation. These replace the conventional shift rods typically found on universal lathes. The machine is equipped with electromechanical spindle brakes for extremely fast spindle stops, ensuring efficient handling. The leadscrews are fitted with overload protection. Performance Data and Specifications: Rsdpjy Hlxfofx Abuoch Center distance: 1000 mm Center height: 200 mm Swing over bed: 400 mm Swing over cross slide: 235 mm Swing without bridge: 550 mm Bed width: 320 mm Cross slide travel: 235 mm Top slide travel: 110 mm Maximum turning tool cross-section: 25x25 mm Chuck mounting: DIN 55027 No. 6 Spindle (main spindle) taper: MK 6 mm Spindle bore: 52 mm Speed Range 1, stepless: 18 – 98 rpm Speed Range 2, stepless: 48 – 265 rpm Speed Range 3, stepless: 144 – 790 / 385 – 2120 rpm Longitudinal feeds (80): 0.015 – 0.6 mm/rev Cross feeds (80): 0.0075 – 0.3 mm/rev Metric thread pitch (40): 0.25 – 7.5 mm Metric module threads (40): 0.0625 – 1.875 mm Inch threads, TPI (40): 120 – 4 TPI Inch module threads, TPI (40): 480 – 16 TPI Tailstock quill taper: MK 4 Tailstock quill diameter: 50 mm Tailstock quill stroke: 100 mm Motor power: 7500 W Power supply: 400/50 V/Hz Total length: 2350 mm Total height: 1330 mm Weight: 1590 kg Standard Equipment: - RÖHM 3-jaw chuck - 5-piece quick-change toolholder set - Halogen machine lamp - Emergency stop button / no-voltage release - Chuck guard with safety switch - Tool slide with splash guard - Machine base / chip tray / splash wall - Tool set / operating manual / CE PREMIUM CU Series Standards: - Heavy-duty grey cast iron machine bed, excellent vibration damping - Removable bridge - Prismatic guideways - Hardened and precision-ground main spindle, high concentricity, adjustable precision bearings - Smooth-running main spindle and feed gearbox in oil bath - Gears made of case-hardened chromium-nickel steel, hardened and precision ground - Feed reverse function - Covered trapezoidal thread leadscrew, hardened, precision ground - Tool slide with locking nut - Precisely adjustable slideways - Solid tailstock with offset - Machining accuracy according to DIN standards Including 3-axis digital position display This machine is available for immediate delivery and can be viewed at our showroom in 71334 Waiblingen-Beinstein. For information on equipment, please contact us.

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, Weiler Condor B universal lathe in excellent condition, ex-educational use, equipped with a new 3-axis digital readout and accessories. Original paintwork. Machine No. 96-2374 with CE certification. Technical specifications: - Year of manufacture: 1996 - Machine number: 96-2374 - Centre height: 165 mm - Distance between centers: 750 mm - Spindle speeds: from 22 to 2800 rpm - Spindle bore: 40 mm - Spindle nose: DIN 55027-5 with bayonet lock - Tailstock: Morse Taper 3 - Feed rates: from 0.016 to 0.5 mm/rev - Thread cutting: metric, imperial, module, and diametral pitch - Metric thread pitch: from 0.18 to 28 mm - Weight: approx. 1100 kg - Switchable spindle brake - Required space: LxWxH 183 x 88 x 129 cm Accessories and equipment: Rcodpfeyuyrusx Abueh - Rhom steel 3-jaw chuck - New collet set 5C 1-28 mm in 0.5 mm steps with new drawbar - New drill chuck 1-13 mm - Multifix toolpost with 4 steel holders - Bed stop - New live centre - Change gears - Faceplate - Coolant system - Chip guard - Spindle cover with emergency stop - German instruction manual

Condition: excellent (used), Year of construction: 1999, turning diameter over cross slide: 1,600 mm, turning length: 6,000 mm, turning diameter: 1,300 mm, spindle bore: 200 mm, spindle motor power: 100,000 W, total height: 2,875 mm, total length: 9,550 mm, total width: 2,950 mm, workpiece weight (max.): 40,000 kg, overall weight: 41,000 kg, Swing over bed Ø 1600 mm Swing over cross slide Ø 1300 mm DBC Turning Length 6000 mm Spindle power 100 kW Rcodpoymk E Asfx Abuoh Tailstock spindle Ø 280 Ø Stroke pinole 200 mm Workpiece weight 40000 Power 125 A Speeds / ranges 250 Rpm Dimensions (Estimate) Length 9550 mm Width 2950 mm Height 2875 mm Weight 41000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2008, spindle bore: 52 mm, turning diameter over bed slide: 400 mm, turning length: 1,000 mm, total length: 2,200 mm, total width: 1,209 mm, total height: 1,800 mm, overall weight: 2,100 kg, Centre lathe Mexpol - TUB40 MACH-ID 9477 Make: Mexpol Type: TUB40 Year: 2008 DBC Turning Length: 1000mm Swing over bed Ø: 400mm Swing over cross slide Ø:250mm Spindle bore: 52mm Spindle power: 5.5kW Bed width: 300mm Tailstock spindle Ø: 60Ø Rjdpfxjyyxm Ae Abuoch Stroke pinole: 130mm Spindle taper: 4Mk Power: 5.5kW Speeds / ranges: 2135Rpm Feed rate X-Axis: 2000mm/min. Feed rate Z-Axis: 1000mm/min. Length: 2200mm Width: 1209mm Height: 1800mm Weight: 2100kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2008, CNC lathe Okuma LU35-M-2ST-600 Control system: OSP-P200L Year of manufacture: 2008 Internal machine number: 25 Max. turning diameter: 550 mm Max. turning length: 600 mm Rcodpfxeyliquj Abujh Bore diameter of spindle: 90 mm Spindle speed: 3,200 rpm Main spindle: 30 kW A-turret: 12 stations (all powered) B-turret: 10 stations Tool holder: VDI 50 Accessories Chuck Kitagawa N15 Chip conveyor Interlit Including external coolant system Door automation Touch setter

Condition: used, Year of construction: 1992, operating hours: 53,500 h, functionality: fully functional, CNC turning machine Manufacturer: GILDEMEISTER Model: CTX-400 Year of manufacture: 1992 Control system: EPL-2 Operating hours: approx. 53,500 h Serial number: 310549 Technical data: - Turret: 12 stations VDI-30 of which 6 stations are driven Redpjzcd Hljfx Abuoch - Spindle speed: 25 - 5,000 rpm Drive power: 27.5 kW at 60% duty cycle - Spindle bore: Ø 72 mm - X-axis travel: 212 mm - Z-axis travel: 640 mm - Max. turning diameter: 500 mm - Turning diameter over guide: 290 mm - Hydraulic steady rest (following rest) Quill stroke 100 mm / MK4 mounting - Hydraulic steady rest SMW Autoblok - Hydraulic 3-jaw chuck 200 mm - Collet chuck Hainbuch - Chip conveyor - Parts catcher (disassembled / incomplete) - Complete programming manual - Mechanical and electrical documentation - Large accessory package of jaws / holders - Spare parts package (drive belts / small parts) - 2x foot switches - Machine weight: 5.2 t - Loading onto truck included

Condition: used, Year of construction: 1997, CNC Turning Center VDF Boehringer VDF 250 Cm (NO TAILSTOCK) General Manufacturer: VDF Boehringer Model: VDF 250 Cm Type: CNC slant bed turning center, chuck work Year: 1997 Serial no.: 1114.3705-24 Control: Siemens Sinumerik 840C Location: Korschenbroich, Germany Working area Swing over bed: 550 mm Rcedpfx Aboz Rnrrsueh Swing over cross slide: 480 mm Max. turning length: 1,000 mm Tailstock: none (chuck work only) Main spindle Spindle nose: size 8, DIN 55026 Spindle bore: 103 mm Max. speed: 4,500 rpm C-axis: yes Axes X travel: 405 mm Z travel: 1,099 mm Rapid traverse: 10 m/min Feed range: 0.1 to 10,000 mm/min Turret 12 stations, VDI 50 (DIN 69880) Driven tools: yes, up to 2,500 rpm, 5.4 kW Driven tool torque: 25 Nm (standard), 100 Nm (low range) Clamping Hydraulic power chuck, special swivel chuck (Sonderschwenkfutter) Full hydraulic clamping cylinder Equipment Coolant system: 600 l tank, 5.5 bar, 60 l/min Chip conveyor: right-hand discharge Hydraulic unit: Hydrokraft Control cabinet: Rittal, with cooling unit Oil mist extractor: yes Pivoting operator panel Electrical 400 V, 3 phase, 50 Hz Main fuse: 125 A Operating current: 100 A Total connected load: approx. 50 kW Dimensions and weight Approx. 5,400 x 3,200 x 2,400 mm (L x W x H) Weight: approx. 10,500 kg Points to check before sending: Weight. The other listing says about 11,000 kg. I used 10,500 kg because that is what is written on the machine (“10,5 to.”). Chuck make. The listing names a Forkardt chuck. The marking on the chuck in your second photo looked like it could be Röhm, so it’s worth a quick look. resale Chip conveyor. It is not visible in the photos. Confirm it is with the machine. Control model. The 840C comes from the listing only. The screen photo doesn’t show it clearly.

Condition: used, Year of construction: 2000, functionality: fully functional, overall weight: 800 kg, chuck outer diameter: 800 mm, mount diameter: 520 mm, bolt circle diameter: 436 mm, cone mount: 286 mm, Pos. 1.0) Chuck diameter ø 800mm Three-jaw power chuck with 6 clamping jaws Manufacturer: SMW-Autoblock ø 800HL-6GR incl. Flange size 11: SMW Autoblock: 241261 FF2 Thread connection for draw tube: Workpiece clamping via jaws: Pneumatic or hydraulic operation. Incl. bolt-on jaws with serrated interface: Weight: approx. 700kg Good condition, low operating hours. ----- Pos. 1.1) Optional flange available Mounting diameter: 520 mm Bolt circle: 436.6mm; M24 Taper: KK 15: 285.78mm Width: approx. 40mm Weight: approx. 60kg _____ SMW-800HL description Suitable for clamping thin-walled workpieces. Designed for horizontal CNC lathes. Adjustable to 6 jaws. STANDARD EQUIPMENT Power chuck with mounting bolts, Incl. set of bolt-on jaws Low maintenance due to sealed design (Proofline series chucks). 6-jaw power chuck _____ Pos. 2) 3-jaw power chuck ø 800 mm Manufacturer: FORKARDT: Jaw interface: Serrated Size: to be provided Thread connection for draw tube: on request Spindle adapter flange for machine: on request Price incl. shipping: on request Rsdpfey Appmex Abuech

Condition: excellent (used), Year of construction: 2011, operating hours: 29,000 h, functionality: fully functional, Weiler E40 Precision Lathe Manufacturer: Weiler Type: E40 Rjdeztypvopfx Abuoch Year of Manufacture: 2011 Condition: Used, operational, ready for demonstration Operating Hours: 29,000 h Scope of Supply: - Documentation - Machine feet - Coolant system - Machine lamp - Full chuck jaws - Half chuck jaws - 3-jaw chuck - 4-jaw chuck - 4-position automatic tool changer incl. 4 tool holders - MultiFix tool changer

Condition: used, Year of construction: 1998, Technical details: internal diameter: 63 mm swing diameter: 320 - 800 mm grinding depth: 380 mm total power requirement: ca. 1,1 kW feed:: 0,05 - 0,40 mm/U / 8 step U/min weight approx.: 1060 kg dimension machine xH: 1,1 x 1,1 x 1,4 m Brake Drum Grinding Machine - turning Ø max./min.: 800 / 320mm - brake drum holder: 63mm, quill stroke 120mm - turning support: longitudinal travel 380mm; transverse travel 200mm - steel holder holder: 180 x 140mm, steel holder 58mm, turning tool for insert holder 20 x 20mm - operation via control panel Rodpfx Asu Ngciebuech *

Condition: used, Year of construction: 2014, Technical details: turning diameter over bed: 660 mm turning dia. over face-slide: 460 mm turning length: 1650 mm centre distance: ca. 2200 mm swing over bed: 660 mm swing diameter over slide rest: 460 mm swing diameter: in Kröpfung: 960 mm centre height: 320 mm control: Siemens 828 D ShopTurn x-axis: ca. 350 (plan) mm spindle bore: Ø 105 mm range of revolution per miute: 26-224 / 225-670 / 671-2.000 stufenlos U/min feed continuous: X: 0,5 - 3.000 mm/min feed continuous: Z: 1 - 3.000 rapid traverse x + z axis: 6 m/min tailstock taper MT: MK 6 quill stroke: 300 mm total power requirement: ca. 23 kW dimension machine xH: 4,2 x 2,3 x 2,3 m Rcedpsu Ix Nrofx Abush dimension swarf conveyor LxWxH: 2,3 x 1,7 x 1,3 m Chip conveyor includes cooling water tank with pump 3-speed manual gearbox with electronic gear shifting Tool holder according to/with Silent Tool Technology equipped (Capto C6) Manual control unit Foot switch Control panel Hydraulics automatic door closing (pneumatic) Accessories see comparable in the photo. *

Condition: used, Technical details: faceplate diameter: 1500 mm center height: über Fundament: 1250 mm revolution per minute: 2,1 ... 96 / 12 step U/min feed min/max: 0,3 ... 2,5 / 18 step mm/min. spindle bore: Ø 82 mm tailstock adjustment - manual: quer: 55 mm tailstock quill stroke: 400 mm tailstock taper MT: 6 weight of the machine ca.: 15 t dimensions L x W x H: Spindelkasten: ca. 2,0 x 1,6 x 2,1 m dimensions L x W x H: Support: ca. 6,0 x 2,1 x 1,6 m Stand support with bed slide: -bed slide travel 4,300mm motorized -cross slide 1500mm -Cross slide 600mm -Top slide 250mm Rcjdpfx Abou Ix Sgsuoh -Tool holder with clamping claw Bed guide dimensions LxW: 6000 x 1500mm 4 base plates each 6000x2050x200mm *

Condition: used, Year of construction: 2005, Technical details: spindle passage: 54 mm z-axis: 900 mm turning length: 900 mm swing diameter: 560 mm Rcodpfx Aboy Ttyqsuoh facing movement (x-axis): 290 mm control: Simens Sinumerik 840D sl spindle turning speed - continuous: 0 - 6000 U/min diameter of main spindle: 120 mm max. torque on the spindle: 190 Nm tool turret: Typ Sauter number of tool tapers: 12 operating pressure: 5 - 6 bar quill stroke: 130 mm diameter of quill: 110 mm rapid traverse: 40 - 50 m/min total power requirement: 37,5 KW weight of the machine ca.: 8,0 t dimension machine approx.LxWxH: 4,8 x 2,4 x 2,3 m • Modular machine design for efficient 2-axis and 4-axis shaft machining as well as chucking part machining • Equipped with pick-up spindle • High basic accuracy and thermal stability as prerequisites for hard turning and precision machining • Prepared for automatic loading and unloading via gantry loader or integrated loading system • Separable machining area for simultaneous two-stage machining on the left and right main spindles • Lowerable tailstock can be combined with a counter spindle • Supports in-process and post-process measurement strategies *

Condition: used, Year of construction: 2001, Technical details: turning diameter over bed: 410 mm turning dia. over face-slide: 200 mm turning length: 950 mm bed width: 330 mm turning diameter over support: 410 mm face slide travel: 630 mm Redpfjzd Sg Ijx Abusch centre height: 200 mm control: Siemens/Weiler D2 milling spindle dia. in forward position: 90 mm spindle bore: 54 mm range of revolution per miute: 1 - 3000 U/min feed speed: 0 - 20 mm/U rapid travel - longitudinal/face: 10/5 m/min tailstock taper MT: 4 diameter of quill: 65 mm quill stroke: 120 mm weight of the machine ca.: 2,1 t dimension machine approx.LxWxH: 2,3 x 1,4 x 1,7 m The E35 is neither a purely manual machine nor a classic CNC, but a hybrid: Work like on a conventional lathe Automatic cycles at the push of a button No complex programming required Extremely fast for single parts & small batch production Also suitable for operators without CNC knowledge Weiler describes it as follows: Simple parts like conventional machining Complex parts like CNC, but easier *

Condition: used, Year of construction: 1999, Technical details: turning diameter over bed: 180 mm turning dia. over face-slide: 75 mm turning length: 325 mm facing movement (x-axis): 56 mm longitudinal traverse (z-axis): 176 mm control: FANUC 21T Rsdpfxsy Emfqo Abuech revolution per minute: 50 - 3000 U/min external spindle dia. in forward position: 50 mm feed force Z - max.: 3000 N spindle bore: 30 mm Main spindle capacity: max. 3,7 KW kW electrics - voltage/frequency: 400 / 50 -60 V/Hz Weight approx.: 1,0 t dimension machine approx.LxWxH: 2,2 x 1,0 x1,62 m The EMCO TURN 325 is a universal CNC/conventional lathe from the EMCO Group (Austria). It is positioned in the mid-range performance and size segment and is frequently used in training, workshops, and production. It is particularly designed for the precision machining of small parts, shafts, and chuck components. Automatic chuck Interface for bar feeder available Various accessories *

Condition: used, Year of construction: 1998, Technical details: turning diameter over bed: 500 mm turning dia. over face-slide: 340 mm turning length: - mm centre distance: 1500 mm swing diameter: 500 mm centre height: 250 mm Rcsdjzu Ndlspfx Abuoh control: Heidehain Plus spindle bore: 80 mm range of revolution per miute: 20 - 2400 U/min total power requirement: 11 kW weight of the machine ca.: 0,25 t dimension machine approx.LxWxH: 3,2 x 1,7 x 1,8 m

Condition: used, Technical details: x-Travel: 530 mm table cross travel (Y-axis): 5200 mm w-axis: - mm drilling depth in one stroke: ca. 4000 mm metrical thread cutting: 0,25 -560 M total power requirement: 35 kW bed width: 560 mm centre distance: 5700 mm Rsdpfezxlwcex Abujch centre height: 500 mm swing diameter over bed: 1000 mm turning diameter over support: 800 mm range of feed in x - axis: 0,0063 - 4,0 mm/U range of feed in y - axis: 0,0063 - 4,0 mm/U spindle bore: 135 mm range drill spindle revolution per minute: max.1400 U/min range drill spindle revolution per minute: min. 7,1 U/min speed steps work spindle: 24 steps tailstock taper MT: MK 6 tailstock quill stroke: 300 mm dimension machine approx.LxWxH: 12,0 x 2,5 x 2,0 m The machine was retrofitted/overhauled in 2007. Special-purpose machine suitable for deep-hole drilling and/or heavy-duty turning operations. Inch thread range: 1/16 – 80 TPI 3-jaw chuck, diameter: Ø 315 mm 2 steady rests Faceplate: Ø 800 mm without jaws PARAT quick-change tool holder, Type 4 3 pieces Coolant system HEIDENHAIN PT 880 4-axis digital readout (DRO) *