Used Table And Chop Saw for sale (44,511)

Condition: used, Technical data: Max. saw blade diameter: 400 mm Min. saw blade diameter: 250 mm Scoring unit and main saw on a single motor Scoring blade diameter: 120 mm Gedpfx Abjxz Dm Ujdobg Manual saw blade height adjustment Tilting saw blade from 0° to 45° Manual blade tilt adjustment Carriage length: 3200 mm Carriage lock Work table: 1200 mm Fence: 1100 mm Ruler, 3400 mm long, with 2 stops Guard Emergency stop switch Power supply: 400 V Main motor power: 7.5 kW Overall dimensions: Length: 3300 mm Width: 5500 mm Height: 1400 mm

Condition: excellent (used), Cross-cut saw Velox 350 with roller conveyor approx. 5000 mm Gbodpjt Ta Urofx Abdog Machine ready for immediate use 1.5 kw, 380 Volt 2 speeds Double miter cuts possible

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, cutting length (max.): 3,300 mm, cutting width at rip fence: 1,650 mm, Equipment: scorer, Top of the line precision tablesaw with fully digital rip fence and crosscut fence. Gbedoxz Dl Ropfx Abdjg Packaged and ready for shipping!

Condition: reconditioned (used), - Paul crosscut saw 15 AO - hydraulic saw stroke - 150 mm cutting height - 500 mm max. cutting width - 1 non-driven roller conveyor approx. 1,600 mm long Godpfow Slgfsx Abdebg

Condition: good (used), Year of construction: 1999, cutting length (max.): 4,200 mm, cutting height (max.): 115 mm, Panel saw with lifting table loading Manufacturer Scheer Type PA 7004 horizontal panel dividing saw with automatic lifting table loading with cutting optimization software in 11.2020 new PC with DNC-AT control, operating system Linux with PA software S5 Cutting length 4200 mm Travel path of the material pusher 4250 mm Cutting height 115 mm Maximum saw blade projection 135 mm Panel saw size FM22 Main saw blade maximum diameter 450 mm Scoring saw blade maximum diameter 200 mm Saw blade bore 30 mm Feed speed of the saw 0-100 m/min. Return speed of the saw 100 m/min. Number of collets 7 pieces Feed speed of the material pusher in the forward direction 30 m/min, in the return direction 70 m/min. Remaining section device SP5004 Saw motor 11 kW, scoring unit 2.2 kW Saw feed motor 1.1 kW, table feed motor 1.63 kW Lifting table motor 4 kW, drive motor for roller conveyor 0.37 kW Gjdpfx Absvyyn Njdobg Total power 20.4 kW Front air cushion support tables 3 pieces Width of the tables 800 mm, length 2000 mm Compressed air maximum 6 bar, limit pressure 7 bar Compressed air hose diameter 10 mm Air consumption approx. 15 liters per cycle Angle pressing device WP 5033 Lifting table device with driven roller conveyor Dimensions 1700 mm x 4700 mm 3 x suction connection diameter 120 mm Documentation available Declaration of conformity available

Condition: good (used), Year of construction: 2005, functionality: fully functional, Mitre saw with stand + extraction unit, year of manufacture approx. 2005 Gbjdpfx Aoxwc Icobdeg

Condition: used, Technical data: Max. saw blade diameter: 400 mm Min. saw blade diameter: 250 mm Saw spindle diameter: 30 mm Scoring unit Manual saw blade height adjustment Tilting saw blade from 0° to 45° Manual saw blade tilt adjustment Sliding table length: 3300 mm Worktable: 1200x700 mm Table height: 840 mm Table extensions: 510 mm Extraction nozzle diameter: 110 mm Fence: 900 mm Ruler length: 2200 mm Power supply: 400 V Main motor power: 4 kW Overall dimensions: Gbjdpfsxzq U Sjx Abdsg Length: 3300 mm Width: 3500 mm Height: 845 mm

Condition: new, Year of construction: 2023, functionality: fully functional, cutting height (max.): 79 mm, saw blade diameter: 250 mm, cutting width at rip fence: 769 mm, total height: 7,900 mm, total length: 14,050 mm, total width: 15,500 mm, table width: 792 mm, table length: 508 mm, input voltage: 230 V, extraction connection diameter: 100 mm, overall weight: 120 kg, rotational speed (max.): 3,800 rpm, hole diameter of the disc: 30 mm, power: 1.45 kW (1.97 HP), The Fusion 1 model is an excellent solution for anyone looking for a compact but very accurate and high-quality saw to start with - Polished cast iron table. - Robust cast iron motor suspension. - Can be used with DADO circular saw blade set. - Two T-slot rails on both sides of the circular saw blade. - Quick and easy control and tilting of the cutting height. - Lever for quick exchange of circular blade. - Positionable main switch. - Quick attachment of the riving knife. - Additional rear table included in the price. - Sufficient power for longitudinal and cross cuts up to 79 mm in height. - Storage space for tools and rulers that are always to hand. - Type: Fusion 1 - Recommended area of application: Craftsman - Power (230 V): 1450 W - Recommended fuse switch: 13 A - Disc x clamping: 250 × 30 mm - Rotations: 3800 rotations/min. - Tilting of the disk: 0-45° - Max. Max. cutting height at 45°: 50 mm Gsdpfxetuurts Abdsbg - Max. Cutting height at 90°: 79 mm - Max. Cutting width: 769 mm - Extraction: 100 mm - Cast iron table size: 508 mm × 792 mm - Overall table size: 1118 mm × 792 mm - T-slot rail dimensions: W × H 24.3 mm (19 mm), × 4.2 (10.7) - Dimensions: 1550 mm × 1405 mm × 1100 mm - Weight: 110 kg - Packaging size: - Cardboard box on its own pallet 1330 mm × 700 mm × 790 mm - Weight incl. packaging: 120 kg Scope of delivery - elongated ruler - Angled ruler - Gripper for small parts - Upper suction hood - Rear table extension - Carbide circular saw blade for universal use (diameter 250/30 mm, Z40 - Hose for suction The machine is delivered partially disassembled in a transport box. The set-up time is estimated at approx. 1 hour.

Condition: excellent (used), OMEC TA185 crosscut saw Maximum cutting height 180mm Maximum cutting width 900mm Saw diameter 550mm Godpsrk Nxgjfx Abdjbg Pneumatic material clamping Pneumatic saw pass Saw control with two buttons Main motor with a power of 7.5kw 2x roller tables length 160cm each CE certificate Technical documentation

Condition: new, Year of construction: 2025, functionality: fully functional, cutting length (max.): 3,200 mm, cutting width at rip fence: 1,250 mm, cutting height (max.): 90 mm, saw blade diameter: 400 mm, height adjustment type: electric, overall weight: 1,810 kg, extraction nozzle diameter: 100 mm, slide length: 3,200 mm, rotational speed (max.): 5,000 rpm, input voltage: 400 V, warranty duration: 12 months, input frequency: 50 Hz, power: 7 kW (9.52 HP), Equipment: motor brake, SC-400/3200 Top. Machine with good quality and solid construction. A machine that meets your expectations. Gjdpfowizxaex Abdobg Stroke length 3200 mm, saw blade 400 mm, scoring blade. The machine is available in several different models and different sizes. Very affordable machine.

Condition: used, Year of construction: 1981, functionality: fully functional, Connected load 380V 3.0kW 6.7A Weight approx. 300 kg Cutting width 900 mm Table extension own construction Sliding table Fixed 90° angle fence Saw blade guard PSV own construction Unit swivels to 45° manually Manual height adjustment Extraction socket 100 mm Rip fence missing Gbsdeq Au N Ejpfx Abdjg Stop for ruler missing

Year of construction: 2005, condition: ready for operation (used), Equipment: T 7300/2, T 7301 (precision adjustment for parallel stop), T 7302, T 7309/2, T 7330 (fixed scale), T 7337 (analog cross stop with seamless alignment), saw blade diameter: 250-500mm, speed: 2800/4000/5500/min, max. cutting height: 80mm, cutting width: 850mm, saw blade swivel range: 0-46°, sliding table length: 3000mm, connected load: 4kW, weight: 1.65t. An on-site inspection is possible. Gbedpfx Abjw S Txvodjg

Condition: used, Technical data: Max saw blade diameter: 400 mm Min saw blade diameter: 300 mm Saw spindle diameter: 30 mm Scorer blade diameter: 120 mm Scorer spindle diameter: 20 mm Scorer with separate motor Manual saw blade height adjustment Tilting saw blade from 0° to 45° Manual saw blade tilt angle adjustment Carriage length: 3200 mm Carriage lock Working table: 640x1000 mm Table height: 920 mm Gbjdpfx Abexzq Rgjdjg Table extensions: 765x420 mm x2 Extraction port diameter: 120 mm Rip fence: 1200 mm Measuring rule length 2800 mm with 2 stops Blade guard Safety switch Power supply: 400 V Power: 6 kW Overall dimensions: Length: 3330 mm Width: 2700 mm Height: 1450 mm

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, TECHNICAL DATA - Demonstration machine from showroom Roll carriage length 3200 mm Cutting length 3400 mm Cutting height max. 155 mm at 90° / 105 mm at 46° Cutting width width stop 1030 mm Saw blade max. Ø 450 mm Saw blade can be lowered under table Ø 400 mm Table size cast table top 1200 x 655 mm Table extension plus 750 x 655 mm Table extension 1200 x 655 mm Table height +/- 20 mm 900 mm Main saw blade speed 3000 / 4000 / 5000 / 6000 rpm Net weight approx. 1051 kg TECHNICAL DESCRIPTION Solid German engineering For trimming, cutting to length, sizing, mitre cutting etc. Dimensionally stable and self-supporting machine body manufactured as a stable welded frame construction made of thick-walled steel profiles, laser-machined sheet steel parts and mechanically processed The torsion-resistant and finely planed cast table top is mounted on the machine body The robust and powerful saw unit installed in the machine frame guarantees precise saw cuts The complete saw shaft unit is dynamically balanced, double-guided swivel segments made of gray cast iron with double column guide Gjdpfx Abogz Hx Dedobg for height adjustment and the long circular saw shaft with 2 ball bearings ensure absolutely smooth running The double roller carriage with ball bearings is smooth-running and maintenance-free. Precise and backlash-free running over the entire length, guided by hardened and and ground round steel guides with remote locking at 50 mm intervals Sturdy yet lightweight cross slide made of steel profiles with a support roller on the outer narrow side, cross slide widening Extendable up to 250 mm on the wide side Length stop on the cross slide with mm scale and telescopic extension, extendable up to 3500 mm; with 2 robust and backlash-free sliding stop flaps, 1 end stop with support for long strips; length stop can be used as an angle mitre stop on both sides, infinitely variable from 0° to 46° with mechanical length compensation; all common mitre angles (15°, 22.5°, 30°, 45°) are can be quickly set via a fixing system Width stop with cutting width 1030 mm to the right of the saw blade with fine adjustment, easy to adjust and fix manually, dimension display via easy-to-read mm measuring scale on adjustable ruler holder Table extension 1200 x 600 mm and table extension 750 x 655 mm Operation on the machine body with 4.3" touchscreen control for cutting height, swivel adjustment and speed Electromotive height and tilt adjustment via touch button Swivel range of the saw blade from 0° - 46 APA saw blade quick clamping system Main saw blade speed 3000 / 4000 / 5000 / 6000 rpm Safety guard can be swiveled to both sides, safety hood with interchangeable wide/narrow insert for saw blades up to Ø 450 mm Push-button control with electronic soft start (start/stop) Electronic, wear-free motor brake Saw blade Ø 400 mm can be lowered under the table Extraction nozzle Ø 120 mm on the machine body, Ø 80 mm on the protective hood Roller carriage, length and width stop profile anodized CE-compliant GS tested

Condition: used, functionality: unexamined, saw blade diameter: 500 mm, cutting height (max.): 160 mm, cutting width (max.): 430 mm, rotational speed (max.): 2,800 rpm, Two-hand control Roller table Gjdpjv Tcmusfx Abdobg Automatic safety and hold-down device

Condition: new, Year of construction: 2024, CASOLIN electronic squaring machine mod. ASTRA 400 5CNC brand new 5 controlled axes version roller carriage mm. 3200 width mm. 360 parallel guide with controlled axis positioning - max opening mm. 1300 telescopic flag with linear guide blade motor HP 7.5 with automatic star/delta starting saw speed rpm 3200/4200/5000 cross slide with tilting register controlled axis blade lifting and tilting Gbsdpfx Abeu At Sdedsg motorized engraver two-axis control max. blade diameter mm. 400 parallelogram blade protection Processing materials: wood, plastics, special materials

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 4550 PROFILE CUTTING AN PROCESSING CENTER ( 9 AXIS & 10 STATION ), - In aluminum and PVC profiles; Grooving, hole drilling, marking, cutting at different angles, etc. Ability to perform operations - 10 special air-cooled spindle motors for high-speed aluminum - Axis speeds averaging 120 m/d - Precise 3-axis profile holding station - Profile feeding capacity 7 pieces - Profile machining length maximum 6500 millimeters / minimum 600 millimeters - Automatic profile length detection - Windows-based, easily adjustable user-friendly interface - Data transfer via USB, Online remote monitoring system - Remote connection support - 23.8" Touch high-performance touchscreen - 30 - 150 degrees between, +- 0.1 degrees servo-controlled cutting unit that allows precise cutting - Transporting the cut waste profiles to the collection cart with automatic conveyor system STANDARD EQUIPMENT - Ø550 Millimeter saw - Automatic waste chip conveyor discharge unit Gbjdpfxorcm Ruj Abdog - Barcode printer OPTIONAL EQUIPMENT - Compatibility with CAM programs - Optional length - Output conveyor with belt system - Safety barrier (Sensor)

Condition: new, Year of construction: 2025, functionality: fully functional, saw blade diameter: 700 mm, cutting height (max.): 250 mm, working height: 850 mm, power: 7.5 kW (10.20 HP), We sell 1 x JRIMAC crosscut saw UKS 1.000 Cross cuts: 60x940 - 140x820mm - 180x720 - 220x520 - 240x340 Max. cutting height: 260mm Saw blade: 700mm Working height: 850mm Bottom and top extraction sockets: 160mm - Infinitely adjustable, pneumatic cutting feed - hydraul. Brake cylinder for even lifting speed - Pneumatically controlled workpiece clamping device - cutting release via 2-hand control, with safety shield - Roller conveyors and stop systems on request Gbedpfx Aberfudredsg

Condition: ready for operation (used), Brand: Rüco Tech info: Max distance between blades: 1830 mm Stroke length: 1600 mm Max saw height: 70 mm Blade diameter: 350 mm Gbsdpfx Asm Sghxjbdjg With pneumatic material pressure unit Engine power of each engine: 2.2 kW Power: 50 Hz, 380V, 3-phase Stock no: 2001575BXA

Year of construction: 2000, condition: good (used), Pressure beam for circular saw for clamping panels or veneers for 3 m sliding carriage Gbodpfx Aotxirfsbdsg

Condition: new, Year of construction: 2025, The WA 8X series convinces above all by its enormous stability. For you, no matter what material you use - whether panel materials or solid wood - the WA 8X masters every challenge with a maximum saw blade projection of 125 mm. Another important feature: the variety of options. You can equip your machine according to your needs! This has the advantage for you that your machine then fits exactly to your workshop and your work processes. Saw blade adjustment Motorised rise/fall and tilt adjustment 0-46° for the main saw blade Digital display of the tilt angle Saw blade diameter 400 Saw blade protrusion 90° 0 - 125 mm Saw blade protrusion 45° 0 - 87 mm Scoring unit Control panel at eye level Sliding table table length 3200 mm, incl. infinitely adjustable top carriage locking Rip fence, cutting width 1300 mm CNC rip fence Gbodpoglh Iwjfx Abdeg Crosscut fence with fixed 90° angle manual adjustment using graduated scale up to 3200 mm Motor 5,5 kW TABLE HEIGHT 910 mm

Condition: good (used), Tornado panel saw Main motor: 5.5 kW, 3 spindle speeds: 3000, 4000, 5000 rpm Maximum blade: 400 mm, Godpfx Absxcvv Rsdjbg Scoring unit: 0.75 kW, 120 mm, Sliding table: 320 cm, Right-side fence manually adjustable up to 1300 mm, Blade tilt 0-45°, manually adjustable, Manual height adjustment, Machine ready for operation.

Condition: excellent (used), Altendorf F45 Panel Saw Sliding table length: 3200 mm Godpfxsxc Et So Abdebg Cutting width to the right: 1300 mm Scoring unit Max cutting height: 120 mm Electric adjustment of saw blade tilt up to 45° Electric lifting and lowering of the worktable Main motor power: 5.5 kW Scoring motor: 0.75 kW Saw blade speed variable via belt: 3000/4000/5000 rpm Max saw blade diameter: 400 mm CE certificate

Condition: excellent (used), SCM nova si40 panel saw Sliding table 320 cm, Main motor 7 kW, Scoring unit 0.75 kW, Gedpfxjxcpbto Abdebg Right-side fence, motorized adjustment up to 1226 mm, 2 blade speeds: 3500 and 5000 rpm, Digital readout from the sliding table, Used machine, in very good condition.

Condition: excellent (used), STROMAB CT800 Beam Cutting Centre A cutting centre for beams with large cross-sections, making it the optimal solution for carpentry and timber frame construction. With electronically controlled 5-axis technology, it meets all requirements for straight, inclined, and compound cuts. It guarantees maximum processing speed and finished product quality while reducing labour requirements and maximizing productivity. The CT800 can process beams of any length, with cross-sections ranging from 120×45 mm to 290×280 mm. Beam movement system with driven rubber wheels and pneumatically tilting upper clamps. Specification: Motor power: 18 kW TCT saw blade: 800 mm Number of electronically controlled axes: 4 Saw table rotation: 0° ÷ 340° Table rotation speed from 0° to 340°: 18" Godpjwtw Avjfx Abdsbg Blade angle: 90° ÷ 45° Positioning speed: 0 ÷ 17 m/min Cutting range: At 90° with single stroke: mm 280×290 / 250×390 / 200×450 At 90° with table movement and repeat cutting: mm 280×770 / 250×840 At 45° with single stroke: mm 200×210 At 45° with table movement and repeat cutting: mm 200×760 Maximum longitudinal cutting height: mm 300