Used Telescopic Belt for sale (12,122)

Condition: new, New device Dcedpsiz S Htefx Adajp MASS International Z-conveyor NDZ Angled conveyor / conveyor belt Available at short notice Example as shown: Height-adjustable angled conveyor belt with adjustable angles Infeed section 600 mm Incline section 1300 mm Discharge section 500 mm Usable width 250 mm External width 305 mm (without motor) Height-adjustable discharge height 700 - 1000 mm Adjustable angles for infeed and discharge sections Adjustable incline PU belt Color: black L cleats Cleat spacing 500 mm Cleat height 30 mm Belt speed 3 m/min Standard control with emergency stop / stop button Mobile on steerable locking rollers Three-piece hopper trays for infeed section

Condition: excellent (used), functionality: fully functional, power: 100 kW (135.96 HP), gearing type: hydrostat, fuel type: diesel, fuel consumption per hour: 12 l/h, fuel tank capacity: 175 l, color: red, overall weight: 15,900 kg, empty load weight: 15,900 kg, maximum load weight: 4,999 kg, lifting power: 4,999 kg/m, lifting height: 20,500 mm, tire size: 445 / 65 R22.5, tire condition: 90 %, axle configuration: 4x4, emission class: euro5, mast type: telescope, Year of construction: 2020, operating hours: 1,762 h, Equipment: UVV, additional headlights, air conditioning, all wheel drive, cabin, crane, gripper hydraulics, head guard, hydraulics, low noise, soot filter, === KEY SPECIFICATIONS === Year: 2020 Operating hours: 1,762 h Maximum lifting capacity: 4,999 kg Maximum lifting height: 20.50 m Maximum outreach: 17.40 m Dcjdpfx Aextnlfedaop Rotation: 360° continuous Stabilisers: Yes (pivot type) Drive: Diesel Transmission: Hydrostatic / automatic Drive system: 4WD – 4WS Steering modes: Front / Coordinated / Crab Cab type: Closed with air conditioning and heating Heated cabin: Yes Remote control: Prepared Telescopic boom: Yes Forks / Jib / Winch included: Forks (Q-Fit system) Tyres: Rough terrain (445/65 R22.5) Engine manufacturer: Deutz TCD 3.6 L4 Emission level: Stage V Power: 100 kW (136 hp) Weight: 15,900 kg CE certification: Yes Price: €99,995 (EXW, excluding VAT) === HIGHLIGHTS === Carefully selected from trusted sources with verifiable history CE certification and full documentation included Ready for immediate transport and operation Comprehensive technical documentation available === CONDITION === Excellent working condition – fully inspected, maintained, and tested by certified professionals. Inspection possible upon request. === LOCATION & DELIVERY === Located in Sittard, the Netherlands. Worldwide delivery possible. Price: €99,995 (EXW / excluding VAT). The Magni RTH 5.21 is a versatile rotating telescopic handler with a lifting height of 20.5 m and a capacity of 5 tonnes. Equipped with a Deutz Stage V engine, pivot stabilisers, and MCTS touchscreen for optimal performance and safety. Fully CE-certified and immediately available from our stock in Sittard. === DELIVERY === Crane loading available upon request for smooth handling at departure. Flexible shipping options tailored to your destination and logistics preferences. All transport is professionally handled by the Collé Rental & Sales logistics team.

Condition: new, functionality: fully functional, Year of construction: 1925, operating hours: 1 h, load capacity: 1,200 kg, lifting height: 5,280 mm, free lift: 1,995 mm, fuel type: diesel, power: 18.4 kW (25.02 HP), motor manufacturer: Perkins 403J-11T, turning radius (outer): 1 mm, tire condition: 100 %, overall weight: 2,900 kg, empty load weight: 2,900 kg, total width: 1,560 mm, color: yellow, Equipment: cabin, GG613 Telehandlers The GG613 is a modern, compact telescopic loader that excels in demanding tasks across construction, agriculture, and industry. It delivers high power, precise control, and reliability, ensuring maximum performance in all conditions. Perkins 403J-11T Engine – Power and Efficiency Powered by a three-cylinder, turbocharged Perkins 403J-11T engine with a displacement of 1.1L (18.4 kW at 2800 rpm), this engine meets emission standards and delivers optimal torque with minimal fuel consumption. Hydrostatic Drive and PWG Hydraulics The hydrostatic drive system combined with the PWG hydraulic pump offers a flow rate of 28.6 l/min (optional 41.6–70 l/min) at a pressure of 225 bar, providing smooth and precise control for efficient management of attachments. Lifting Height and Operating Capacity The GG613 telehandler provides a maximum lifting height of 5280 mm with a standard bucket and 4981 mm with pallet forks, making it an ideal solution for loading and transporting materials without the need for additional equipment. Stability and Operator Comfort Thanks to its low center of gravity and wide wheelbase, the machine offers excellent stability and safety. The operator’s cab is ergonomically designed, delivers outstanding visibility, and features hydrostatic power steering for precise maneuvering on challenging terrain. Efficiency and Economy Equipped with a 33L fuel tank and a 36L hydraulic oil tank, the machine supports long periods of operation without frequent refueling. The 0.5 m³ bucket capacity and a maximum lifting capacity of 1200 kg ensure high productivity and operational efficiency. Compact Dimensions and Maneuverability Maximum load: 1200 kg Operating weight: 2900 kg Engine: Perkins 403J-11T Number of cylinders: 3 Engine type: Water-cooled, turbocharged, four-stroke Rated power / speed: 18.4 kW / 2800 rpm Displacement: 1.1 l Drive type: Hydrostatic axle drive Axle: Planetary drive on steering axle Hydraulic system: PWG Pump type: Gear pump Dcodpfsxr Rwbox Adaop Flow rate: 28.6 l/min (optional 41.6–70 l/min) Pump pressure: 225 bar Fuel tank capacity: 33 l Hydraulic oil tank capacity: 36 l Bucket volume: 0.5 m³ Total attachment tilt angle: 148° First gear – speed: 0–8 km/h Second gear – speed: 0–20 km/h Tyres: 10.0/75 - 15.3 Overall length (with standard bucket): 3944 mm Overall length (with pallet forks): 4081 mm Overall length (without standard bucket): 2977 mm Hinge point bucket to axle center: 450 mm Wheelbase: 1922 mm Rear overhang: 427 mm Cabin height: 1995 mm Maximum working height (with standard bucket): 5280 mm Maximum working height (with pallet forks): 4981 mm Maximum boom pivot height: 4537 mm Load height with extended boom: 4163 mm Load height with retracted boom: 2949 mm Load height (with pallet forks): 4301/3087 mm Tipping height with extended boom: 3566 mm Tipping height with retracted boom: 2352 mm Working distance: 476 mm Maximum reach at load height: 2289/932 mm

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 4607269, total width: 2,100 mm, total height: 2,400 mm, total length: 2,830 mm, working width: 1,350 mm, grinding width: 1,350 mm, overall weight: 2,850 kg, grinding height: 160 mm, power: 22 kW (29.91 HP), height adjustment type: electric, type of input current: three-phase, conveyor belt speed: 20,500 mm/s, grinding belt length: 2,620 mm, workpiece height (max.): 160 mm, pass-through height: 160 mm, compressed air connection: 6 bar, grinding belt width: 1,380 mm, table height adjustment: 157 mm, power of feed motor: 1,500 W, input frequency: 50 Hz, air demand: 1 m³/h, input voltage: 400 V, operating pressure: 6 bar, workpiece width (max.): 1,350 mm, 🪵 2002 Viet Challenge 223 Wide Belt Sander – Heavy-Duty Finishing, Very Good Condition Take your wood finishing to the next level with this 2002 Viet Challenge 223 Wide Belt Sander – a high-performance sanding solution for woodworking professionals. Built in Italy for precision and durability, the Viet Challenge 223 is trusted by cabinetmakers, joiners, and production workshops across Europe. Now available in very good condition, this twin-head sander offers consistent results on solid wood, veneered panels, and composite materials – ideal for both calibration and fine finishing. ✅ Key Features – Viet Challenge 223/20 Year of Manufacture: 2002 Condition: Very good – clean, well-maintained, fully operational Sanding Heads: 2 (roughing + finishing) Working Width: 1,350 mm Working Thickness: 3 – 160 mm Minimum Workpiece Length: Approx. 400 mm Abrasive Belt Dimensions: 1,380 mm x 2,620 mm Main Motor Power: 11 kW + 11 kW (approx.) Feed Speed: Variable, 3.7 to 20.5 m/min Powered Height Adjustment Emergency Stop and Safety Features Feed Motor: 1.5kW Lifting Motor: 0.37kW Suction Speed: 25m/s Compressed Air: 6 bar Air Consumption: 17 l/min Machine Dimensions: 2830 x 2100 x 2400mm Machine Weight: 2850kg 🧱 Ideal For: Solid wood panel calibration Veneered panel sanding MDF and composite board finishing Flat panel furniture components General wood surface preparation and finishing 📦 Machine Includes: Viet Challenge 223 main sanding unit Twin sanding heads for combined roughing & fine finish Integrated feed table and dust extraction ports Original manuals and safety guards Fully tested and ready for operation 📍 Availability & Delivery Djdpfx Adownr A Heaocp This machine is in stock and available for immediate inspection and delivery. Shipping support available throughout Ireland, UK, and Europe. 📞 Enquire Now Looking for a dependable wide belt sander with professional-grade features? This Viet Challenge 223 is a rare find at this price and condition. Viet Challenge 223 Wide Belt Sander for sale Used wide belt sander in very good condition Heavy-duty industrial sander for woodworking Woodworking sanding machine for panels Twin-head wide belt sander for solid wood Viet wide belt sander UK / Ireland / Europe Wide belt sander for furniture and cabinetry production

Year of construction: 2002, condition: used, Empty weight: 1.000 kg Price: On request - Year: 2002 - Documentation available: Yes - CE marking present: Yes - Serial number: 7068 - Automatic output system present: No - Automatic feed system present: No - Transport weight [kg]: 1000kg - Transport packages [pcs.]: 1 Dodpewnhp Asfx Adajcp Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Year of construction: 2023, condition: used, length 4000 mm width 400 mm Total power requirement 1,5 kW Dcsdpfxow Nbllj Adaop weight of the machine ca. 450 t

Condition: new, New device MASS International Model NS1 Angle conveyor / L-conveyor / conveyor belt Available at short notice Adjustable angle conveyor NS1 with collecting plates in the feed section Example as shown: Feed section: 600 mm Incline section: 1300 mm Usable width: 250 mm External width: 305 mm (without motor) Height adjustable discharge height: 750 - 1050 mm Adjustable angle between feed and incline section Tilt angle variably adjustable Cleat height: 30 mm Cleat spacing: 500 mm Belt speed: 3 m/min Mobile on lockable swivel castors Dcodpfxsuip Ils Adasp Three-piece hopper plates for feed section Other angle conveyors available in different dimensions, see list image 4. Custom dimensions are no problem.

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, operating hours: 379 h, power: 18 kW (24.47 HP), load capacity: 225 kg, mast type: telescope, lifting height: 20,800 mm, lifting power: 225 kg/m, platform length: 1,800 mm, platform width: 850 mm, overall weight: 6,500 kg, transport length: 6,650 mm, transport width: 2,270 mm, transport height: 2,150 mm, fuel type: hybrid, tire condition: 80 %, wheelbase: 4,000 mm, color: blue, Equipment: UVV, === MAIN SPECIFICATIONS === Year: 2016 Operating hours: 379 h Max working height: 20.8 m Max outreach: 12.8 m Platform capacity: 225 kg Platform size (L x W): 1800 x 850 mm Upper structure rotation: 360° Platform rotation: Yes (100°) Boom type: Articulated Jib: Yes (150° fly-boom) Power: Bi-Energy (Battery & Diesel Kubota 722) Drive system: 2x4 Tyres: Rough-terrain Machine weight: 6500 kg CE certification: Yes === HIGHLIGHTS === Carefully selected from trusted sources with verifiable history CE certification and full documentation included Ready for immediate transport and operation Excellent condition with only 379 operating hours === CONDITION === Dcjdjxtbuyepfx Adaop Clean and well-maintained machine. Tyre profile approx. 80%. 4/5 overall condition. Ready for dispatch from our Sittard stock. === LOCATION & DELIVERY === Located in Sittard, the Netherlands. Worldwide delivery available. Price on request (EXW / excluding VAT). The Niftylift HR21E 2x4 is a compact and versatile bi-energy articulated boom lift powered by battery and diesel engine. With a 20.8 m working height and 12.8 m outreach, it provides excellent access to difficult areas. Ideal for both indoor and outdoor work requiring low noise and minimal emissions. CE-certified and ready for work.

Condition: used, Year of construction: 2020, load capacity: 13,000 kg, lifting height: 9,700 mm, total length: 6,200 mm, - Max. Kapazität mit Gabeln bei 600 mm 13 000 kg - Max. Reichweite 5,17 m - Betriebsbremse Ölbad-Lamellenbremsen hydraulisch unterstützt an beiden Achsen - Feststellbremse Automatische negative Feststellbremse - Motor MERCEDES - Art OM 936 LA. E4-3 (Stufe IV / Tier IV final) - Hubraum 4 Zylinder 5,1 Liter - Leistung: 176 PS / 129 kW - Max. Drehmoment 750 Nm / 1200-1600 U/min - Batterien 24 V - 2X12 V - 120 Ah - 850 A - Zugkraft: 10 800 daN Djdpfx Adjxt Uy Neaecp - Steigfähigkeit: 34% - Getriebe hydrostatisch - Elektrohydraulische Steuerung - Anzahl der Gänge (vorwärts/rückwärts) 2/2 - Lenkmodus 4-Rad-Lenkung - 3 Lenkmodi - Max. Fahrgeschwindigkeit (kann je nach geltendem Recht variieren) 31 km/h - Achsen DANA - Hydrauliköl 290 l - Kraftstoff 315 l - Geräusch am Steuerplatz (LpA) 80 dB - Umgebungslärm (LwA) 107 dB - Vibration auf die ganze Hand / den ganzen Arm

Condition: good (used), Wide Belt Sander Sandigmaster SCSB 2 1100 Dcsdpfxsxf T R De Adasp Working width: 1100 mm Max. workpiece thickness: 150 mm Feed speed: 7 + 14 m/min Units: Contact rubber roller: 15 kW Sanding shoe: 11 kW Brush: 1.5 kW The conveyor belt was replaced with a new one in 2022. Good condition Weight approx. 2600 kg

Condition: used, Year of construction: 2018, Wide belt sander Boere Sandrite 1100C 380V Maximum sanding width 1100mm Maximum sanding height 150mm Sanding unit COMBI Engine 11kW (15HP) Transport dimensions:1800x1300x2100mm (LxWxH), Weight 1850kg Dsdpfswnhwasx Adaocp - Year: 2018 - Documentation available: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1999, operating hours: 6,218 h, mast type: telescopic, fuel type: diesel, Equipment: all wheel drive, Drive: Wheel Dcodpfexqzy Dox Adaep Make of engine: Deutz Working height: 2.800 cm Please contact Kristoff Van Havere for more information - Good working condition

Condition: new, New device MASS International NS3 Speciale Angled conveyor belt with separator Available at short notice Example as shown: Dedpfod Tidxjx Adajcp L-shaped conveyor with double roller separator Infeed section: 600 mm Inclined section: 1300 mm Usable width: 450 mm External width: 505 mm (without motor) Height-adjustable discharge height: 750 - 1050 mm Adjustable angles for the infeed section and incline Black PU belt with cleats Cleat height: 20 mm Cleat spacing: 500 mm Belt speed: 3 m/min Mobile on swivel castors with brakes Side collecting plates in the infeed section Also available as an angled conveyor with supergrip belt and separator (see last two photos) Double roller separator with covered belt drive Covered with super grip Adjustable discharge chute

Condition: used, Bulk lot consisting of: - (2) conveyors (infeed and outfeed) Dcsdpfxoxugxme Adasp - Various conveyors of different lengths and much more

Condition: like new (used), functionality: fully functional, Year of construction: 2023, operating hours: 33 h, load capacity: 250 kg, Max. working height: 16.27 m Max. work platform height: 14.27 m Pivot point: 7.30 m Max. reach: 8.09 m Negative height: 1.06 m Negative reach: 7.25 m Lift capacity: 320 kg Max. number of persons: 2 Max. gradeability (retracted): 40% Max. slope: X-5°/Y-5° Max. wind speed: 12.50 m/s Turning radius (inside): 3 m Turning radius (outside): 4.73 m Jib type: Regular JIB length: 1.50 m Vertical jib rotation: 132° Work platform width: 0.79 m Platform length: 1.83 m Work platform rotation: 180° Total weight: 8,300 kg kg Speed (retracted): 6 km/h Speed (extended): 1.10 km/h Tires: 315/55D20 Hydraulic oil tank: 145 l Battery type: Lead-acid battery Battery capacity: 48V/375Ah Charger: 48VDC/60A Charger type: Single-phase 220V Charging time from 0 to 100%*: 5 hours Traction drive: 34AC/9kW Lift drive: 34VAC/13kW Emergency power supply: 12V DC Drive: Hydrostatic Length of work platform (rotated basket): 5.17 m Width of work platform (transport): 2.44 m Dcodpfx Adsv Ivmqsasp Height of work platform (transport): 2.58 m Wheelbase: 2.40 m Ground clearance: 0.31 m Drive: Electric drive Lifting system: Hydraulic Use: Indoor/Outdoor STANDARD EQUIPMENT • Front oscillating axle • Two travel speeds • 2 steerable wheels • 4 drive wheels • 360° rotation (endless) • Integrated special drive axle • Modular design with parts compatibility across the entire range • Proportional controls • Joystick rocker steering • Rotating beacon • Non-marking tires • Horn • Hour meter • Extreme conditions kit • 12 V DC emergency power supply BATTERY • TIANNENG – Lead-acid battery • Battery capacity: 48 V/375 Ah • Charger: 48 VDC/60 A • Single-phase 220 V • Charging time from 0 to 100% (h)*: 5 • Power outlet on the platform BASKET • Self-leveling • Rotating +/-90° • Schuko 16 socket A/250 V SAFETY • Drive activation system • Platform load sensing system • On-board diagnostics • Emergency lowering • Tilt control with warning message • Anti-pinch protection

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, working width: 1,300 mm, Wide belt sander, sanding machine 1300mm Manufacturer: Ott Model: RSO-1300 Year of manufacture: 1992 Working width: 1300mm with roller 15 kW and Dcjdpsxruw Ejfx Adaop shoe 11 kW + brush Feed speed: 10m & 20m

Condition: used, Year of construction: 2008, total width: 1,900 mm, total height: 2,100 mm, total length: 2,000 mm, Empty weight: 1.350 kg Wide belt sander Casolin Avant RRT 1100 Machine no. 9632007 Maximum sanding width 1100mm Min/max sanding height 3-150mm Sanding belt size 2150x1140mm Feed speed 6-12m/min Required extraction capacity 3500m³/h Engine 11kW 15kW, 27Amp, 380V Dcjdpjwng N Uefx Adaep Transport dimensions: 2000x1900x2100mm (LxWxH), Weight +/- 1350kg - Year: 2008 - Documentation available: Yes - Serial number: 9632007 - Transport dimensions: 2000mm x 1900mm x 2100mm (l x w x h) - Transport weight [kg]: 1350kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2013, operating hours: 1,933 h, 2013 | Haulotte HTL3210 | Used Telescopic Forklift | 1933 hours 📍Location: France, Illange 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 29500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 61 inspection points 55 approved ✅ 6 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Load moment indicator mallfunction , hydraulic functions sometimes refuses to operate ( needs to be checked ) backlight missing , no engineplate found Dcodpfxsxtgh Se Adasp 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39712 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: new, New device MASS International Angle Conveyor / Belt Conveyor L-shaped conveyor belt with fixed 35° angle Available at short notice MASS International Angle Conveyor NC1 Conveyor belt with fixed angle and collecting plates in the infeed section Example as illustrated: NC 1 Infeed section 600 mm Dcjdpfxehm Axge Adaop Inclined section 1300 mm Usable width 250 mm External width 305 mm (without motor) Height-adjustable discharge height 750 - 1050 mm Fixed angle between infeed and inclined section Inclination variably adjustable Cleat height 30 mm Cleat spacing 500 mm Belt speed 3 m/min Mobile on swivel castors with brakes Optional: Dimensions to customer specification FDA-compliant belt Modified belt speed etc.

Condition: used, Year of construction: 2019, operating hours: 2,578 h, Serial number: man00000v0077xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20204 Specifications: - 2019 model - 2578 hours (will increase slightly) - 115 kW - Net weight: 18900 kg - Tires (see pictures) - Pallet forks - 4 Stabilizers - Four-wheel steering - Max capacity: 4999 kg - Max lift height: 24.7 m - Max reach: 21.4 m - Length: 9.03 m - Machine Width: 2.49 m - Height: 3.05 m - Diesel heater - Air conditioning - Lights - Ready for delivery Description: We have a 2019 Manitou MRT2550+ Telescopic handler w/ Pallet forks for sale. The max lift height is 24.7 meters and the reach is 21.4 meters. Here you get a reliable telescopic handler that works as it should according to the owner. Ready for delivery. Hours: 2578 Own weight: 18900 Total Weight: 18900 Width: 249 Kw: 115 Djdpfx Adjwdu Uwsajcp Model: MRT2550+ Teleskoptruck m/ pallegafler

Condition: good (used), Eillert G1500 belt slicer stainless frame, 250mm belt width, 3Ph, mobile, with hold down belt, iceberg lettuce, carrots, cucumbers etc, 1Ph Dedotzqdmspfx Adascp

Condition: used, Johannsen T 94 long-belt sander for precise sanding of solid wood and veneer surfaces. The machine is ideal for joineries and high-end interior finishing and, thanks to its robust construction and sensitive belt control, ensures a consistent sanding pattern. Includes a large supply of sanding belts. Dcodpsxtbvdjfx Adaep Grinding length: approx. 2,600 mm Grinding width: about 850 mm clearance height: approx. 340 mm height adjustment: electrical engine: 4 kW LBH: approx. 4 x 2.2 x 1.5 m mass: about 700 kg

Condition: used, Year of construction: 2017, total width: 1,900 mm, total height: 2,150 mm, total length: 1,650 mm, Empty weight: 1.499 kg Price: On request Dcodewl Uffjpfx Adajp - Year: 2017 - Documentation available: No - CE marking present: Yes - Serial number: AB00002054 - Number of units [pcs]: 1 - └ Unit 1: - - Sanding belt length [mm]: 2150 - - Sanding belt width [mm]: 1150 - - Motor power [kW]: 11 - Max. working width [mm]: 1100 - Min. working height [mm]: 4 - Max. working height [mm]: 170 - Voltage [V]: 400 - Current consumption [A]: 36 - Transport dimensions: 1650mm x 1900mm x 2150mm (l x w x h) - Transport weight [kg]: 1499kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2019, operating hours: 11,169 h, Serial number: 18xxxx Please contact ATS Norway for more information Please provide reference number upon request: 18852 Dodpfxevg A D To Adajcp Specifications: Year: 2019 Hours: approx. 11,200 Weight: ~49,000 kg Power: 310 kW Full service history (Pon Equipment) Fine cone crusher Integrated screening unit Includes screen meshes Output fractions: 0–4 mm, 4–8 mm, 8–16 mm Large feed hopper with conveyor Lights Ready for delivery Description:High-capacity Metso LT220D cone crusher with integrated screen.Compact, mobile and easy to set up – takes approx. 30 minutes after transport.Can handle: 0–160 mm material through the screen 32–160 mm material directly into the crusher Well-maintained through service agreement with Pon.Includes several screen meshes and spare parts.Ready for immediate delivery. Hours: 11169 Own weight: 49000 Total Weight: 49000 Kw: 310 Model: Lokotrack LT220D Finknuser m/ sikt, matekasse og transportbånd

Condition: used, Year of construction: 2002, operating hours: 27,518 h, BOERE sanding line 'Compact' Elite Year of construction 2002 (CE) Operating hours 27518 Maximum height 150 mm Maximum width 1100 mm Elite BKKS 1100 First generator 30kW engine Second generator 18.5kW engine Third generator 15kW engine Voltage 380V, 128Amp Elite TKKS 1100 Dcsdjwng Hmopfx Adaep First generator 30kW engine Second generator 18.5kW engine Third generator 15kW engine Voltage 380V, 117Amp - Year: 2002 - Documentation available: No - Serial number: - Operating hours: 27518 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels