Used Telescopic Belt for sale (12,097)

Condition: used, Year of construction: 2023, operating hours: 80 h, mast type: telescopic, fuel type: diesel, Lifting capacity: 450 kg Working height: 4.330 cm Chodpowyr N Dofx Aaced Rental currency: EUR Please contact Jan De Lepeleer for more information

Condition: new, Year of construction: 2025, We offer customized conveyor belt solutions, whether chain belt conveyors, apron conveyors, sliding belt conveyors as feeders for baling presses, shredders or as extensions for slitter rewinders. Chodpfx Aaeq A S Evecod Manufactured according to customer requirements, this is a sample offer.

Condition: good (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 437.0COLIBRI, power: 8 kW (10.88 HP), compressed air connection: 6 bar, input frequency: 50 Hz, input voltage: 380 V, operating pressure: 6 bar, workpiece width (max.): 630 mm, Well-maintained wide belt sander available 2 rollers for pre-sanding and fine sanding 2 feed speeds Electrically adjustable height with digital readout Sanding width: 630 mm 2 extraction ports Assistance with loading can be provided. Chjdpfx Aeuh Sccjacsd

Condition: new, Year of construction: 2025, load capacity: 4,000 kg, lifting height: 17,550 mm, total length: 7,350 mm, Max. Tragkraft: 4000 kg Max. Hubhöhe: 17.55 m Max. Reichweite: 13.08 m Csdpextf Nhofx Aacshd Ausbrechkraft mit Schaufel: 7766 daN Aufwärtsneigewinkel: 16 ° Abwärtsneigewinkel: 110 ° Wenderadius (über Räder): 3.94 m Heben: 16 s Senken: 12 s Teleskop ausfahren: 16 s Teleskop Einfahren: 13 s Ankippen: 4 s Auskippen: 4 s Motornorm: Stage V Zylinderzahl / Tragfähigkeit der Zylinder: 4 - 3621 cm³ Nennleistung Verbrennungsmotor - Leistung 100 Hp / 75 kW Max. Drehmoment / Motorumdrehung: 410 Nm @ 1600 rpm Zugkraft: 7850 daN Getriebetyp: Drehmomentwandler Anzahl der Gänge (vorwärts / rückwärts): 4 / 4 Fahrgeschwindigkeit (beladen): 25 km/h Max. travel speed: 24.90 km/h Max. Fahrgeschwindigkeit (kann je nach geltenden Vorschriften variieren): 24.90 km/h Parkbremse: Automatische Parkbremse Feststellbremse: Ölbad-Lamellenbremse an Vorder- und Hinterachse Typ Hydraulikpumpe: Zahnradpumpe Hydraulikfördermenge / Hydraulikfördermenge – Hydraulikdruck 167 l/min-270 bar Motoröl: 10 l Hydrauliköl: 135 l Fassungsvermögen des Kraftstofftanks: 140 l Geräuschpegel im Fahrerstand (LpA): 79 dB Umgebungsgeräusch (LwA): 106 dB Schwingungsbelastung Hand/Arm: < 2.50 m/s² Lenkräder (vorne / hinten): 2 / 2 Antriebsräder (vorne / hinten): 2 / 2 Kabinen-Zertifizierung: Kabine ROPS - FOPS Stufe 2 Steuerungen: JSM

Condition: excellent (used), Year of construction: 1983, Johannsen Long Belt Sander T 82 - K Pneuma - Air-cushioned sanding pad - Max. workpiece length: 2800 mm - Table width: 950 mm - 5.5 kW main motor - 2.2 kW fan motor - Sanding belt width: 160 mm - Extraction connection diameter: 180 mm - Right/left rotation - Handwheel adjustment - Overall dimensions (L/W/H): 4080x1800x1400 mm - Weight approx. 1000 kg Chjdpfxexpmtye Aacod Location: ex stock Saarland - immediately available -

Condition: ready for operation (used), Dosing Belt Conveyor Kleemann Brand: Kleemann A-A  length = 6.000 mm Beltwidth: 800 mm Driving : 4 kW E-Motor Cedpfx Aemy Tddjacjhd On stock : 2 Pieces.

Condition: used, Year of construction: 2023, operating hours: 505 h, mast type: telescopic, fuel type: diesel, Empty weight: 20.040 kg Chodpfjw S Svgsx Aacod Lifting capacity: 450 kg Rental currency: EUR Please contact Jan De Lepeleer for more information

Condition: ready for operation (used), Year of construction: 2006, working width: 150 mm, overall weight: 150 kg, Conveyor Belt 2500 mm Manufacturer: Makor Type: TEP 2500 Powered conveyor belt from a finishing line (positioned in front of a Makor profile spraying machine), Cjdpfx Aaextnfrscehd Length approx. 2500 mm Belt width: 150 mm Pass-through width (with existing side guides): max. approx. 320 mm Feed speed steplessly adjustable via variator Equipped with stable, adjustable side guides Dimensions approx. 2500 x 550 mm (LxW) Weight approx. 150 kg Documentation available

Condition: used, Year of construction: 2019, 1 piece Combined Pipe Belt Grinder METALLKRAFT KRBS 101 as per photos and inspection Colour: blue Year of manufacture: 2019 Condition: used Payment method: advance payment by bank transfer Storage location: Hall 2 Chsdexrclwopfx Aacsd Shipping: Collection only – Shipping is not offered for this item!

Condition: good (used), Year of construction: 2022, functionality: fully functional, For sale: a lot of 3 modern belt conveyors from SSI Schäfer (2022), in very good condition. These conveyors meet high industrial standards and offer reliable, quiet operation—perfect for warehouse and logistics environments. Technical specifications: Length: 4600 mm Total width: 900 mm Belt width: 770 mm Leg height: 300 mm (full set included) Motor: 0.75 kW, 1400 rpm, 50/60 Hz Cjdpfx Aaexup Rrjcjhd The robust construction combined with efficient performance makes them ideal for transporting cartons, crates, and other goods with a flat underside. The machines are already pallet-mounted for quick delivery.

Condition: excellent (used), fuel type: electric, color: red, lifting height: 25,900 mm, mast type: telescopic, Year of construction: 2024, General information Year of manufacture: 2024 Measures and weights Empty weight: 18.000 kg Dimensions (LxBxH): 928 x 250 x 310 cm Functional Mast length: 21,7 m Lifting capacity: 6.000 kg Fork length: 1.200 mm CE mark: yes Chsdexph D Tspfx Aacsd Condition Technical condition: very good Visual appearance: very good Damages: none

Condition: used, Year of construction: 2005, - Manufacturer: Cefa - Type: KLEENSPRAY - Year of manufacture: 2005 - Working width: 1,200 mm - Working height: 900 mm + - 20 mm - Operating side: right - Price for reconditioned machine - Gun drive: Duo version - Height-adjustable sprayers - Dry extraction - Extraction nozzle diameter 490 x 350 mm - Exhaust air capacity ~ 6,500 m³/h - Paper belt transport system - Feed speed continuously adjustable 1.5 - 7 m/min - PLC control with touch screen Chjdexnbhvopfx Aaced - Number of sprayers installed 0 - Number of paint pumps 0 - Suitable for solvent-based paints - Suitable for water-based paints - Length 4.300 mm - Width 3.360 mm + 1.850 mm - Height 2.700 mm - Total connection ~ 7.1 kW / 28.6 A - Volts, Hz 400 / 50 - Location, in stock - Voltage fluctuations max. +/- 5% _____ Optionally, we can also provide you with a quote for assembly and commissioning of the system, as well as training for employees. On request, we also offer regular maintenance and servicing of the machine. For further information, please contact us!

Condition: used, Year of construction: 2018, operating hours: 1,885 h, mast type: telescopic, fuel type: diesel, Lifting capacity: 450 kg Working height: 4.030 cm Rental currency: EUR Cjdpjwyr I Hefx Aacjhd Please contact Jan De Lepeleer for more information

Condition: excellent (used), Opportunity 2500/950 table Cjdpfjxtfytjx Aacshd

Condition: used, Year of construction: 1978, Number of belts: 2-belt Max. working width: 1100 mm Min. working height: 3 mm Max. working height: 160 mm 1st belt: calibration roller Diameter of 1st roller: 260 mm Type of 1st roller: grooved rubber roller Abrasive belt length 1st unit: 1900 mm Chodpfxoxta H Is Aacod Abrasive belt width 1st unit: 1100 mm Abrasive belt speed 1st unit: 25 m/sec Drive unit 1: 20 kW 2nd belt: pad unit Sanding shoe 2nd unit: pneumatic Abrasive belt length 2nd unit: 1900 mm Abrasive belt width 2nd unit: 1100 mm Abrasive belt speed 2nd unit: 25 m/sec Drive unit 2: 13.5 kW Cleaning brushes: Yes Feed speed: 7 m/min / 14 m/min (selectable) Control: manual control panel Electric/pneumatic belt oscillation: Yes Table lift: electro-motorized Table display: mechanical numerical indicator Operating pressure: 6 bar Machine number: 185 Weight approx.: 2500 kg Dimensions: 1800 x 2000 x 1900 mm Extraction diameter: 2 x 200 mm Location: Nattheim

Condition: excellent (used), Wide Belt Sander FORMAT 4 Finish 1302 -used- Constant working height due to upper part adjustment, Combination unit with contact roller and sanding pad, Rubber-coated contact roller, Pneumatic activation of the contact roller, Electronic segmented sanding pad, Digital display for sanding height, Infinitely variable feed speed, Automatic belt centering, Operation via touchscreen display, Air-cushioned sanding pad, Sanding belt oscillation Chedpfx Aaexnm Rcoced ----- Technical Data ----- Working width: 1,300 mm Number of belts: 2 units Sanding belt dimensions: 1,310 x 2,200 mm Feed speed: 3.7–16 m/min Segment width sanding pad: 55 mm Max. workpiece thickness: 170 mm Min. workpiece thickness: 5 mm Extraction port Ø: 2x200 mm Motor power: 18.5 kW Second motor power: 15 kW Dimensions (LxWxH): 1,950 x 2,250 x 2,600 mm Weight: 2,400 kg Quality Information: - Belt tracking / balance checked - Sanding pad checked / refurbished - Height adjustment checked - Thorough basic cleaning - Electrical system checked - Immediately ready for use

Condition: good (used), Year of construction: 2014, Conveyor belt, belt conveyor, conveyor belt, belt conveyor, belt conveyor -Manufacturer: Transnorm, belt conveyor with central drive -Type: 1100 -Speed: m/min -Drive: SEW-Eurodrive 1.1/0.11 kW, see photo nameplate -Belt width: 600 mm -Conveyor length: approx. 13800 mm / approx. 1000 mm height adjustable -Set-up dimension: 13880/970/H370 mm Chedpfx Aajign Uneced -Transport dimension: 4770/970/H1580 mm -Total weight: 478 kg

Condition: new, Year of construction: 2025, CASADEI Libra 35 - Wide belt sanding machines in two belt version immediately available - ex stock 54634 Bitburg Technical data grinding width 1100 mm Min. / max. working height 4 /170 mm Sanding belt width 1115 mm grinding belt length 1900 mm feed speeds 4,5 / 9 m/min feed motor 0,33/0,55 kW Table adjustment motor power 0,25 kW Drive motor power 11 kW Electrical voltage 400 V Phase(s) 3 Ph Mains frequency 50 Hz Length 1650 mm Width/depth 1820 mm Height 1960 mm Illustration with optional equipment Wide belt sander as double belt version up to 1100 mm with many equipment options for the price-conscious craftsman's workshop Robust tube-stiffened monoblock steel machine body with working units mounted high up for maximum rigidity Csdpocr S Ecsfx Aacshd User-friendly due to clear control panel on the front side Motorized table height adjustment Digital display for working height Electronically controlled sanding belt oscillation with reduced compressed air requirement Automatic star-delta start for main motor Natural rubber feed carpet with negative profile Support table with two rollers in the infeed and outfeed of the feed carpet Carpet feed via gear motor with two speeds Flexible steel pressure rail in front of the first unit Rubber pressure rollers, in front and behind each working unit Pneumatic belt tensioning for each unit with decimal correction possibility of the core/ belt strength Quality - Made in Europe Execution RTC 1. aggregate with bevelled steel roller Ø 120 mm and fine adjustment for calibration 2. aggregate combination aggregate with fine adjustable working height for calibrating and fine grinding with rubber coated roller Ø 120 mm (45 Sh) and hard grinding shoe with graphite coating on exchangeable insert Scope of delivery: Working table height adjustment with electronic display of working height. Oscillation of the sanding belts with electronic system Rubber coated grooved pressure roller at the infeed 1° position with anti-reverse device (C.E.) Star-delta start-up of the main motors Grooved steel calibration roller Selector switch for positioning the grinding shoe from the control panel Accessories: - Semi-hard flat sanding shoe - Automatic carpet centering Location: Ex stock Bitburg - at special price

Condition: used, // Equipment dismantled and stored in our warehouse // Manufacturer: Larox / Pannevis (Larox B.V.) Model: RT®/FT 1.15 x 5.6 m Type: Vacuum belt filter Year: 2008 (1988 version refurbished) Application: Liquid/solid separation, with cake drying and filtrate recovery. FT = Fume-Tight Materials: stainless steel Filter area: 6.4 m² Cake cleaning: – Option to perform several washing stages, with each filtrate collected in its own receiver (purity up to 99.99% or more) with low washing water consumption. – Backwashing Repositioning of the tray and support grids at each retraction Operation/power supply: continuous Continuously washed filter cloth Cloth orientation and tensioner Extraction screw Chjdpfsxnc Nhjx Aacjd Skid with 3 filtration tanks and circulation pumps Vacuum pump skid: – Sihi Sterling LPHA 70123 (Atex) – Liquid ring: ethanol – 855 m³/h – 21.83 KW – Heat exchanger – Recirculation pump – Separator tank Main machine weight: 3000 kg Main machine length: 913 cm Full technical documentation (paper and digital versions) Electrical cabinet

Condition: new, Year of construction: 2025, For machining smaller parts, especially solid wood Simple and safe operation Combined sanding unit with sanding shoe for calibrating solid wood Control panel on the front side Standard with ribbed steel roller Ø 120 mm and hard sanding shoe with graphite coating on exchangeable insert Motorized height adjustment of the working table Electronically controlled sanding belt oscillation Manual star/delta start of the motor Mechanical measurement of the table position Ammeter for displaying the current consumption of the grinding unit Two feed belt speeds Electromagnetic brake Combination unit for calibrating and grinding Ribbed steel roller Ø 120 mm with height fine adjustment Hard grinding shoe with graphite pad Universal version for calibrating and sanding of solid wood Csdpfx Aaocnw U Recohd Model BBS 630 C Article-No. 5343065 Technical data working width 630 mm diameter of the working roller 120 mm sanding belt width 650 mm Sanding belt length 1600 mm Speed of the sanding belt 18 m/s Min./max. workpiece height 3/160 mm Feed speed 4,5 / 9 m/min. Motor power 5 kW / 400 V Gear feed motor 0,43 Height adjustment motor 0,18 kW Compressed air consumption 20 l/min. Operating pressure 5,5 bar Operating pressure belt blower 8 bar Suction pipe diameter 150 mm Suction capacity 3.000 m³/h Dimensions mm 600 x 1010 x 1500 mm Weight 770 kg Location: Comes to stock 54634 Bitburg

Condition: excellent (used), Year of construction: 1972, Bürkle long-belt sander with vacuum table and vacuum pump Table size approx. 2500 mm x 800 mm Manual height adjustment Without top belt cover Belt length 7200 mm Weight approx. 900 kg Dimensions approx. L x W x H approx. 3800 x 1700 x 1600 mm Location: Arrives at the end of April at warehouse 54634 Bitburg Cjdpfx Asv Trlaeacohd Sold as is - no warranty - no guarantee - freight prepaid -

Condition: excellent (used), Year of construction: 2020, Compact wide-belt sanding machine with combination sanding unit With special offer equipment – Top condition – Special offer equipment: - Switching the sanding shoe on and off from the control panel - Switching the roller on and off from the control panel - Electronic control Fox 500 KTR - Table extension with 2 rollers for infeed and outfeed - Automatic table positioning with button control Article number: 5222100A2 Also suitable for smaller workshops for occasional use Combination sanding unit with sanding shoe for fine sanding Standard with diagonal-grooved steel roller Ø 120 mm for calibration Fine adjustment of working height Clear control panel on the front side Robust tube-reinforced monoblock steel machine body, robot-welded, with work units positioned high up for maximum rigidity Motorized table height adjustment with digital display Electronically controlled sanding belt oscillation Feed carpet driven by gear motor with two speeds Natural rubber feed belt with negative profile Flexible steel pressure rail in front of the first unit Rubber pressure rollers before and after each working unit Pneumatic belt tensioning per unit with decimal correction possible for grit/belt thickness Universally applicable for solid wood and veneer thanks to the combination unit Entry-level model for smaller companies Working width 950 mm Chjdpfxsxac E Hj Aacod Equipment details Combination unit for calibration and sanding Diagonal-grooved steel roller Ø 120 mm with fine height adjustment Hard sanding shoe with graphite pad Universal version for calibration and sanding of solid wood, chipboard, and veneer Technical data Length (product) approx. 1388 mm Height (product) approx. 1668 mm Width/depth (product) approx. 1545 mm Connection for extraction Extraction port diameter 140 mm Electrical data Connection voltage 400V Current type AC Phases 3Ph Line frequency 50Hz Feed motor power 0.33 / 0.55 kW Table height adjustment motor power 0.25 kW Drive motor power 7.5 kW Sanding unit Sanding belt length 1525 mm Max. sanding width 950 mm Sanding belt width 970 mm Feed unit Feed speed 4.5 / 9 m/min Workpiece Min. workpiece height 4 mm Max. workpiece height 170 mm Location: ex stock 54634 Bitburg - Immediately available -

Condition: new, Year of construction: 2025, KRBS 101 Combined pipe, profile and belt grinder Convenient operation due to easily adjustable clamping device The rotatable clamping jaws of the clamping device allow safe clamping of square tubes, round tubes and flat steel Adjustable grinding angle from 30 - 90° and from 0° - 60°. Due to the optimised quick-change holder, the tensioning pulley can be changed easily and quickly without tools Particularly durable due to larger and improved roller bearings Practical tension pulley holders integrated in the substructure Extensive range of tension rollers for grinding different pipe diameters available as accessories Quick change between pipe grinding and belt grinding possible Powerful motor Almost all adjustments can be made without tools (operating tool included) Large, hinged protective screen with optimum field of vision 2 belt speeds for optimum adaptation to the respective material (15 m/s best for stainless steel and aluminium, 30 m/s perfectly suitable for steel) With two easily removable chip collecting containers Suction nozzle (Ø 100 mm) for suction systems available Suction units available as accessories Further developed, vibration reducing substructure Scope of delivery: 1 x standard sanding belt grain K 36 2 x spit collection container 1 x screw wrench 1 x sanding roller 42 mm Model KRBS 101 Article no. 3921001 Technical data Mains connection 400 V Csdpfx Ajcnz Ayeacjhd Mains frequency 50 Hz Motor power 2.5 / 3.3 kW Sc

Condition: new, Year of construction: 2025, Robust design also allows the machining of longer workpieces Sanding unit swivels, therefore also usable as edge sanding machine 225 mm large balanced belt rollers ensure low-vibration drive. Easy adjustment of the grinding belt High belt speed of 17 m/s Right-left rotation Upper grinding sole with graphite coating grinding shoe 4-fold spring mounted With movable grinding shoe for bevelled surfaces Smooth-running grinding table even with high loads from heavy workpieces Optimal price-performance ratio Additional equipment ESE Electrical table height adjustment as standard Divided table to fold up for special edge grinding Drawer sanding device Integrated worktable lighting Equipment details 225 mm large balanced belt rollers ensure optimum and low-vibration drive belt speed 17 m/s With swivel-mounted professional sanding shoe for bevelled surfaces 4-fold spring suspension Electrical table height adjustment as standard Operating elements ergonomically arranged on separate control panel With drawer sanding device as standard Divided table to fold up for special edge grinding applications Chsdjff Hdfopfx Aacsd Dimensions and weights Length approx. 3750 mm width/depth approx. 1250 mm Height approx. 1730 mm Weight approx. 520 kg Dust extraction connection Suction nozzle diameter 160 / 160 mm Work table(s) Work table height adjustment 550 mm Work table transverse stroke 690 mm Electrical data Power Höh

Condition: good (used), Year of construction: 1978, Used machine Condition: good Table size: 2600 x 900 mm Max. usable grinding length: 2500 mm Belt length: 7100 mm x 150 mm Throat depth right: 1100 mm Motor: 5.2 kW Chjdpfxsw E N Ste Aacsd Manual adjustment Shipping dimensions: 4300 x 1650 x 1800 mm Weight: 620 kg Location: ex stock 54634 Bitburg - immediately available -