Used Thermal Bridges for sale (1,904)

Condition: used, No. 3213 Thermal treatment system / vacuum dryer WTT Used, year of construction 2017 Thermal treatment system / thermal chamber for the modification of wood The WTT thermal chamber is a system for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on the thickness and type of wood. The system has a powerful energy and heat transfer system and works with a gas or oil-fired boiler system that uses thermal oil as a heat transfer medium. Technical data: Capacity: 5950 - 9900 m³ of wood per year (for 330 working days) Usable volume: 9 m³ (with 50 mm wood thickness) Stack dimensions: 10500 x 1300 x 1100 mm LWH Minimum board thickness: 10 mm Power connection: 3 x 400 V, 50 Hz + zero + earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heat output: 2 MW (230 °C - 250 °C thermal oil) Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm stainless steel duplex EN 4462 Door opens hydraulically, with 1.5 kW drive Working pressure: 0.1 to 15 bar (absolute) Rsdpfx Asv Si Szoaajr Working temperature: 0 °C to 220 °C 200 mm glass wool insulation, clad with 1 mm galvanized sheet steel Main components: 1. autoclave, in which the heat treatment takes place 2. vacuum system that sucks the air out of the autoclave before heat is applied 3. energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. nitrogen generator 6. gas cooler system Heating and cooling system: Heat exchanger: 8 units (4 on each side) Material: Stainless steel pipes (seawater resistant) Total floor area: 165 m² Cooling water consumption: 1000 l/batch (not contaminated, only heated) Control and operation: Control system: WTT ExoT (fully automatic) 22” color monitor, IBM computer, printer Sensors: 4 PT100 temperature sensors 2 mechanical thermometers 1 vacuum/pressure transmitter 1 mechanical vacuum/pressure gauge Special equipment: Hydraulic rail bridge for convenient transportation of wooden trolleys Automatic trolley extraction with cable winch (1.5 kW) 2 MW thermal oil boiler (heating) Fuel oil tank (4000 l) with measuring system Insulated 20 foot steel container for heating module Stainless steel safety chimney (300 mm diameter, 6000 mm length) Functional description: 1. filling the autoclave with wood 2. creating a pre-vacuum 3. filling with gas 4. heating 5. modifying 6. cooling 7. pressure equalization 8. creating a post-vacuum / drying 9. pressure equalization 10. emptying Certified EC Pressure Equipment Directive (PED) 97/23/EF Construction EN 13445 Sale on behalf of customer, from location near 5020 Salzburg (Austria), without dismantling, transportation and assembly Dismantling, loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Year of construction: 2015, condition: used, functionality: fully functional, REGENERATIVE THERMAL OXIDIZER (RTO) system RELOX REGENUS 2040/2 for sale! Availability: November, 2025 Layout in attachment below REGENERATIVE THERMAL OXIDIZER (RTO) Rsdsw Hb Ebepfx Aaajr Main Technical Parameters – Relox REGENUS 2040/2 (RTO) Production year: 2015 Max. exhaust air flow: 40,000 Nm³/h Thermal power (hot water exchanger): 1,000 kW Heat recovery efficiency: > 96% Oxidation temperature: ~800–850 °C Max. burner chamber temperature: 1,000 °C Gas burner power: ~600 kW (turn-down ratio ~1:5) Control system: PLC Hot water heat exchanger Installation dimensions (L×W×H): Approx. 7,100 × 5,250 × 6,300 mm Weight: ~36.2 t

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 3815407, lifting height: 8,500 mm, load capacity: 16,000 kg, track width: 1,400 mm, rope length: 43,700 mm, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Lift capacity: 16,000 kg Span: 6.5 m Lifting height: 8.50 m Lifting speed: 5.00 / 0.80 m/min Rsdpfxjwc Tt Ao Aaasr Lift motor power: 15.00 / 2.50 kW Lift motor type: H72 Lift motor rating: 40 / 20% Chassis and drive Chassis type: OE-S 06 Travel drive type: SF25228313 Travel speed: 20.0 / 5.0 m/min Travel motor power: 1.25 / 0.32 kW Travel motor rating: 40 / 20% Protection and environmental data Protection class: IP55 Overload protection system: SLE3 Ambient temperature: -20 to +40 °C MACHINE DETAILS Connection voltage: 400 V Control voltage: 230 V Mains frequency: 50 Hz Mechanics and dimensions Wire rope / chain: 330 010 9 Load handling device: H252-4 Rope length: 43.70 m Track gauge / flange width: 1,400 mm Rail width: 50 mm Cab weight: 1,335 kg Crane bridge weight: 2,725 kg Length: 25.1 m Width: 7.4 m Height: 7.6 m Segmentation: 7.9 + 8.0 + 7.9 m EQUIPMENT - Wire rope or chain hoist - Load handling device H252-4 - SLE3 overload protection system - IP55 protection class - Two-stage lifting and travel operation - Long bridge length of 43.70 m - High load capacity up to 16,000 kg

Condition: good (used), functionality: fully functional, The Labcycler Gradient has the same technical features as its brother Labcycler Basic has. In addition, the Gradient function is active which can be applied by Thermoblock 48 , Thermoblock 96 , Thermoblock 96 alu , and Thermoblock 384. Temperature gradients from 8 to 24 zones are possible to determine the optimal annealing temperature. The Thermoblock 96 and 384 can be applied for high through put. The Triple Block can be used in the Labcycler Gradient without gradient function. The package Labcycler Gradient with Thermoblock 96 and Triple Block should be an interesting tool for all standard laboratories. Ordering Information The Labcycler Gradient must be ordered in combination with one Thermoblock. Additionally, a second or more Thermoblocks can be ordered because the system has a quick-block-changing system. A Thermoblock can be changed in a few seconds. The Labcycler Gradient works at all global line voltages Technical Data Line voltage 85 V to 265 V, 50 to 60 Hz Power consumption Maximum 350 W, standby 25 W Noise Idle 38 dBA, typical 44 dBA, maximum 48 dBA Display TFT illuminated colour display ¼ VGA, 5.7“ diagonal, 320 x 240 pixel, touchscreen Heated Lid Programable: Pressure 0 to 120 N, temperature RT up to 110 °C Keyboard Numeric and virtual keys Languages English, German, Spanish Programs 680 standard programs, or at least 3000 steps, the last 16 program runs can be displayed any time, re-start function, programmed and manual pause Password protection Configurable up to 64 users Administration Administrator rights: Reading & writing Redpfx Aasu Tkbneaor Copy function Intersystem-copy-function with Labcycler 48 & 192s, Labcycler Basic, and Labcycler Gradient Good working condition. Please check out our other listings as well.

Year of construction: 2013, condition: like new (used), Thermal shrink machines are devices that allow for very rapid (3–5 sec.) shrinking of bags around the packaged product by immersion in hot water. ADVANTAGES: • Attractive product appearance • Process started by a button on the control panel • Digital temperature regulation • Optimal hygiene • Robust stainless steel construction • Possibility of using insulating balls to improve process efficiency Rjdpfoxx Tp Hex Aaasr • Base immersion enabled by hydraulic actuator movement TECHNICAL SPECIFICATION DT100 Machine dimensions: 880 x 1000 x 1320 mm Chamber dimensions: 600 x 800 x 220 mm Immersion depth: 220 mm Cycle time: 3–5 sec Weight: 155 kg Voltage: 400 V-3-50 Hz Power: 15.0 kW

Condition: good (used), Tires with rim, trailer tires, heavy-duty tires, heavy-duty wheels, forklift tires -Manufacturer: Bridgestone, J-Lug tire with inner tube Rodpoyx S Taefx Aaajr -Tire size: 7.50-15 -Quantity: 1 tire available -Dimensions: Ø 775 x 185 mm -Weight: 37 kg

Condition: used, machine/vehicle number: 9.5 R 17.5LOWLOSADER TIRE, first registration: 11/2005, color: other, Year of construction: 2005, LOWLOADER TIRE. ON RIM 12 MM Rjdoxwkz Dopfx Aaasr

Year of construction: 2000, condition: used, Serial number: 445/40 R 22.5 Rsdex Ahldspfx Aaaor LAGE TRAILER BANDEN

Year of construction: 2010, condition: used, Year of manufacture: Nov 2010 Rjdpfx Ajxva Udeaaor New: No GEBRUIKTE TRAILER BANDEN 425/65 R 22.5 | 12 MM 200 EURO| 6 MM 125 EURO|3 MM 100 EURO| INCL VELG.

Year of construction: 2010, condition: used, Year of manufacture: Nov 2010 Rodpfxjxvbauj Aaajr New: No GEBRUIKTE TRAILER BANDEN 425/65 R 22.5 8 MM 150 EURO 6 MM 125 EUR 4/3 MM 100 URO INCL VELG.

Year of construction: 2000, condition: used, Serial number: 385/65 R 22.5 Redsx Ahf Rjpfx Aaasr 4 TRAILERBANDEN 8,9 EN 12 MM PROFIEL DIEPTE.

Year of construction: 2010, condition: used, Year of manufacture: Nov 2010 New: No Rodpfxexva Svs Aaajr GEBRUIKTE TRAILERBANDEN OP VELG 10 GAATS VOOR LANDBOUW OF TRANSPORT.

Year of construction: 2010, condition: used, Year of manufacture: Nov 2010 New: No Redpfxexvbc Ne Aaasr GEBRUIKTE OPLEGGER BANDEN 425/65 R 22.5 4/6 MM PROFIEL 100 EURO P STUK VOOR LANDBOUW OF TRANSPORT.

Year of construction: 2000, condition: used, Serial number: 385/65 R 22.5 Redox Ah Hzjpfx Aaasr 4 BANDEN MET VELG VOOR SCHIJFREMMEN 2 X ALUMINIUM VELG 2 X STALEN VELG 10 GAATS.

Year of construction: 2000, condition: used, REDELIJKE BANDEN Rodpfxex Ah Aio Aaasr

Condition: used, first registration: 07/2005, color: other, Year of construction: 2005, LIGHT TRUCK TIRES WITH 6 HOLES RIMS. Rjdpfx Asxvx Shjaaor

Condition: excellent (used), Part suitable for: cars Rjdpfx Ajx N R Rfoaaer Technical condition: very good Optical condition: very good

Condition: excellent (used), Part suitable for: cars Redpfx Asx N R N Ueaaer Technical condition: very good Optical condition: very good

Condition: used, Year of construction: 2011, We are offering this very rarely used oil tempering unit. It was utilized for research purposes. The unit still contains the thermal oil. The two connection hoses (no guarantee) are also included. Two units are available; please see the second listing. Both are of equal specification. Please send your price offer—and allow some time for a response, as we handle these matters alongside our main activities. Rodpfx Aaeyk Dr Djajr The unit must, if not already done, be dismantled and disconnected by your own qualified personnel. All transport-related procedures and requirements are to be carried out at your own expense and risk. The buyer is liable for any (consequential) damages occurring on the premises. Pickup must be completed within 14 days of sale.

Condition: used, Year of construction: 1992, HTI thermal oil heating system in a 20" container - 1,600 liter capacity - 320 kW - Flow temperature 300 °C AB 1000 high-temperature boiler - 1,000 liter capacity - Year of manufacture 1978 Weishaupt burner - Type WL40Z-A The system is operational and in good, used condition. Rsdpfx Aaswlim Djajr Subject to prior sale and errors. System location: Germany - 02943 Boxberg, OT Nochten, Upper Lusatia

Condition: good (used), functionality: fully functional, travel distance X-axis: 1,300 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 700 mm, spindle speed (max.): 3,650 rpm, spindle speed (min.): 55 rpm, quill stroke: 127 mm, spindle mount: MK 3, table width: 300 mm, table length: 1,500 mm, overall weight: 1,800 kg, Equipment: rotational speed infinitely variable, Table size: 1500 x 300 mm X-axis travel: 1300 mm Y-axis travel: 420 mm Z-axis travel: 700 mm Speed range: 55 - 3650 rpm (Variomatic) Spindle taper: ISO30 Spindle stroke: 127 mm Spindle feeds: 0.04 - 0.08 - 0.15 mm/rev. Supplied with: Digital readout 3-axis Feeds on all axis Coolingunit Power drawbar Machinevice Turrethead 360° turnable Bridgeport-type mill Rsdpfx Aoywixqeaaor Country of origin: Taiwan Motor power: 2.2 kW Machine (L×W×H): 200 x 180 x 200 cm Machine weight: 1800 kg

Condition: good (used), Year of construction: 1994, Cutting unit with edge peeling for the Lisec ESL-60/30RS cutting line In good condition, as it has rarely been used. Length: 1100 mm Rodpfsyx Dvmsx Aaajr Width: 800 mm Height: 850 mm Weight: 120 kg Condition: Good, second-hand

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 1,250 mm, controller manufacturer: SIEMENS, controller model: 810T, total height: 2,900 mm, number of axes: 3, This 3-axis Hardinge Bridgeport MMD VMC1250 P3 vertical machining centre was manufactured in 2006. It features a Siemens 810T control system and offers an impressive X-axis travel of 1250 mm, making it suitable for various milling applications. The machine's transport dimensions are approximately 4400 mm in width, 5500 mm in depth, and 2900 mm in height. Consider the opportunity to buy this Hardinge Bridgeport MMD VMC1250 P3 machine we have for sale. Contact us for further details. Rjdpfx Asx D Hk Ijaaor Dimensions Machine Depth 4400 mm

Condition: ready for operation (used), Year of construction: 2000, controller manufacturer: HEIDENHAIN, controller model: TNC 426, number of axes: 3, This 3-axis Bridgeport VMC600 22 digital was manufactured in 2000. It's a vertical machining center equipped with the Heidenhain T.N C 426 control system, ensuring precise and efficient milling operations. Ideal for a variety of milling applications, this machine represents a valuable addition to any workshop. If you are looking to get high-quality milling capabilities, consider the Bridgeport VMC600 22 digital machine we have for sale. Contact us for further details regarding this machine. Redpfxex D Huto Aaajr

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 600 mm, travel distance Y-axis: 540 mm, travel distance Z-axis: 540 mm, controller manufacturer: SIEMENS, controller model: Sinumerik, table width: 540 mm, table length: 750 mm, spindle speed (max.): 8,000 rpm, spindle motor power: 15,000 W, This Bridgeport GX 600 Vertical Machining Center was built in 2007 in the United Kingdom. Equipped with a SIEMENS SINUMERIK Control unit, this machine can operate with a spindle speed up to 8000 rpm. Redpfx Aaoyi Eg Heajr Machine Benefits Technical Machine Benefits • Spindle nose to table top: 145-685 mm