Used Thermostat for sale (194)

Condition: new, Year of construction: 2024, machine/vehicle number: 05004TRW090130, Drying Oven TRW, Model II Fpjdpfx Apoh Tyrweweg For drying racks with max. 50rods, useable size 90x126cm, outer dimensions: approx. 2280mm wide x 1570mm deep x 2280mm high, useable space: approx. 1400x1070x1660mm, fixing and drying temperature: up to max. 180°C, connection: 400V, 50Hz, 21kW, weight: 900kg, lacquering: corps RAL 7035 (light grey), doors RAL 7037 (dust grey). ATTENTION: Not permitted for solvents! Chamber dryer, all-steel construction, with good thermal insulation. Simple insertion of drying racks by means of easy-to-open wing doors. The air is sucked out of the drying chamber by ventilators, is blown through thermostat-controlled heating registers and re-fed temperature-controlled to the drying chamber. The horizontal air guide in the drying chamber guarantees an even temperature control. The required temperature can easily be adjusted via actual and nominal value thermostat. Overheating protection by safety thermostat. Particularly suitable for fixing and drying of textile inks and flock glues up to 180°C. - Various drying racks for different applications available. - Special varnishing upon request. ATTENTION: Not permitted for solvents! Not permitted for foods!

Condition: new, Year of construction: 2024, Drying and Burn-in Furnace TRO, Model I For drying racks with max. 50rods, useable size 60x90cm, outer dimensions: approx. 2290mm wide x 1390mm deep x 2230mm high, useable space: approx. 1400x1070x1660cm. Suitable for vaporisation of low amounts of solvent, authorised for inks and solvents up to hazard class A II, according to safety requirements DIN EN 1539. Equipped with control of the minimum exhaust volume and a heating system in regard to the exceedance of the max. temperature. Fixing and drying temperature: up to max. 180°C. Power connection: 400V/50Hz, 21kW, weight: approx. 650kg, varnishing: corps RAL 7035 (light grey), doors RAL 7037 (dust grey). Special varnishing upon request. Fpedjd I T Exspfx Apweg Chamber dryer, all-steel construction, with good thermal insulation. Simple insertion of drying racks by means of easy-to-open wing doors. The air is sucked out of the drying chamber by ventilators, is blown through thermostat-controlled heating registers and re-fed temperature-controlled to the drying chamber. The solvents released during the drying process are dissipated from the exhaust side of the ventilator while supply air gets into the drying chamber. The horizontal air guide in the drying chamber guarantees an even temperature control. The required temperature can easile adjusted via actual and nominal value thermostat. Overheating protection by safety thermostat. Particularly suitable for fixing and drying of textile inks, flock glues as well as for burning-in of plate and aluminium signs up to 180°C. - Various drying racks for different applications available. - We recommend the installation of a gas warning unit. Delivery time 10-12 weeks. ATTENTION: Not permitted for solvents! Not permitted for foods!

Condition: new, Year of construction: 2024, For max. screen size: 120x145cm, connection: 400V, 50Hz, 6kW Sturdy drying cabinet in full steel construction, with 5 drawers smoothly moving on ball bearings. Good air circulation, with thermostat and timer, with white plastic-coated plate on top, can be used as deposit place. Fjdpfxjh Tymrj Apwspg

Year of construction: 2019, condition: used, functionality: fully functional, machine/vehicle number: 19207555, This listing is for a tilting bratt pan from the premium manufacturer MKN, model Optima 850 Gas 3/1 GN, featuring motorized tilting. The unit has undergone a comprehensive inspection in our in-house workshop and is fully functional, with a 6-month warranty on all electrical components. The tilting bratt pan is in good used condition, free of defects, and is supplied mounted on legs. If required, the legs can be removed so the unit can be installed on a plinth. The manufacturer's RRP is €29,140 net. Our price: €8,394.95 net (€9,990 gross) Our used equipment service includes: 6-month warranty on all electrical components High-quality branded equipment at fair prices Professional refurbishment, inspection & expert cleaning Tested and fully functional – or your money back Flexible shipping or self-collection options Expert advice before and after purchase Provision of operating manuals, wiring diagrams, & spare parts Fpjdpfexq D S Nex Apweg Safety inspection according to DGUV V3 Technical data: Dimensions (W x D x H): approx. 1600 x 850 x 700 mm Pan internal dimensions: 1020 x 540 x 210 mm deep Power supply: V: 220-240 / kW: 17 Model: 10019153 Serial number: 19207555 Year of manufacture: 2019 Rated capacity / usable capacity: 116 / 94 liters Condition: Used, fully inspected, fully functional Additional information: Optimized rated capacity: 116 liters Usable capacity: 94 liters The front pivot point of the pan and the shape of the pouring spout prevent spillage and ensure complete emptying 55 mm cleaning gap between pan and side frame Supplied as standard with double-walled hinged cover and mixing tap Pan bottom made from special sandwich material as standard for even heat distribution Thermostatic temperature control Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement

Year of construction: 2023, condition: new, New Refrigerated Compressed Air Dryer DESCRIPTION Eligible for BAFA subsidy (as of 06/2023) User-friendly operation concept Efficient design for cost-effective and reliable operation Cooling fan with variable speed control from 0 - 100%, eliminating the need for the usual pressure switch and thermostat for fan control Fewer wear parts with a consistently stable pressure dew point Control system displays five different alarm statuses and retains them in memory Refrigeration compressor shuts off below 15°C ambient temperature if no compressed air is flowing Fsdpfx Apjw I U Auewepg Clear layout and easy access to all serviceable components Equipped with built-in automatic condensate drain Key Advantages at a Glance Highly efficient Excellent price-performance ratio No unnecessary compressed air losses thanks to integrated electronic condensate drain Connected tools and machines are optimally protected User-friendly control concept TECHNICAL DATA General Information Air flow rate l/min: 1800 l/min Air flow rate m³/h: 108 m³/h Maximum pressure: 16 bar Air connection: ½" Power consumption: 0.2 kW Dimensions and Weights Length (product): approx. 325 mm Width/depth (product): approx. 430 mm Height (product): approx. 445 mm Weight (net): approx. 24 kg Availability: short-term Location: Hochheim

Year of construction: 2023, condition: new, New machine Year of manufacture: 2023 DESCRIPTION User-friendly operating concept Efficient design for cost-effective and safe operation Cooling fan with speed control from 0 - 100%, eliminating the need for the usual pressure switch and thermostat for fan control Fewer wearing parts with a constant pressure dew point Control displays five different alarm states and stores them in memory Refrigeration compressor switches off below 15°C ambient temperature if no compressed air is flowing through Clear layout and easy accessibility of all maintenance components Equipped with built-in automatic condensate drain Key benefits at a glance: - High efficiency - Excellent price-performance ratio - No unnecessary compressed air losses thanks to integrated electronic condensate drain - Connected tools and machines are optimally protected - User-friendly operating concept TECHNICAL DATA General information - Air flow rate: 1200 l/min - Air flow rate: 72 m³/h - Maximum pressure: 16 bar - Air connection: ½" - Power consumption: 0.2 kW Dimensions and weights - Length (product): approx. 325 mm - Width/depth (product): approx. 430 mm Fedpfx Apew I U Ikowjpg - Height (product): approx. 445 mm - Weight (net): approx. 24 kg Availability: short-term Location: Hochheim

Year of construction: 2023, condition: new, New Refrigeration Dryer Year of Manufacture: 2023 User-friendly operation concept Efficient design for cost-effective and safe operation Cooling fan with 0 - 100% variable speed control, eliminating the need for the usual pressure switch and thermostat for fan control Fewer wear parts with a consistently stable pressure dew point Control panel displays five different alarm statuses and retains them in memory Refrigeration compressor switches off below 15°C ambient temperature when no compressed air is flowing through Clear layout and easy access to all serviceable components Equipped with an integrated automatic condensate drain Key Advantages at a Glance • High efficiency • Excellent price-performance ratio • No unnecessary compressed air losses thanks to integrated electronic condensate drain Fedpfx Apjw I U H Tewopg • Connected tools and machinery are optimally protected • User-friendly operation concept TECHNICAL DATA General Information Airflow rate: 900 l/min Airflow rate: 54 m³/h Maximum pressure: 16 bar Air connection: ½" Power consumption: 0.18 kW Dimensions and Weights Length (approx.): 325 mm Width/Depth (approx.): 430 mm Height (approx.): 445 mm Net weight (approx.): 24 kg Availability: short term Location: Hochheim

Condition: new, Year of construction: 2025, Automatic Packing Machine: SIEMENS PLC Controlled, equipped with volumetric cups system. Applicable for the granule packing. Standard Features integrate metering, bag-making, packaging, sealing, printing and counting. Standard positioning with servo film transporting system. Stable for transporting film with two synchronous belts. High automation with auto correction function. Reasonable structure, convenient adjusting operation and maintenance. - Specifications: max. speed of the machine in neutral: 60 cycles/minute; bag size: L(50-230mm), W(50-150mm); the max width of packing film: 320 mm; thickness of film: 0.04-0.09mm; bag making mode: pillow bag, gusset bag; range of measuring: 150-500ml; air consumption: 0.8Mps 0.25m³/min; power/voltage: 2kW/220V, 50Hz; dimension (LxWxH): 1200×905×1300mm; weight: 300kg; body: SS304; touch screen SIEMENS, PLC SIEMENS, control valve SIEMENS, servo motor PANASONIC, Cylinder and pneumatic components SMC/FESTO, Solenoid valve SMC/FESTO, triplet union SMC, Thermostats OMRON. - Volumetric cup device: Suitable for automatic measuring of small granule materials and powder materials with good fluidity, such as granulated sugar, seeds, etc. - Specifications: max. speed of the machine in neutral: 60 cycles/min; weight range: 100g-500g; soft brush with motor: the turntable is equipped with a soft brush to handle the product carefully; auger system: range 1-50ml; accuracy: within +/-0.1g; max. speed of the machine in neutral: 50 cycles/min; power source: 220V, 50Hz/110W. - Please note: This is only a sample system. Please let us know your requirements. Fodpfxov Nmhbe Apwspg That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: refurbished (used), Year of construction: 2006, power: 90 kW (122.37 HP), fuel type: electric, volume flow: 1,000 m³/h, pressure (max.): 7.5 bar, type of cooling: air, We offer this refurbished Atlas Copco GA90 rotary screw compressor, year 2006. The compressor was imported from Europe and has not been operated in Ukraine. Comprehensive repairs have been carried out, including replacement of the screw block bearings and gearbox (multiplier) bearings, shaft seal replacement and bushing, replacement of the flexible coupling for torque transmission, replacement of the electric motor bearings, as well as replacement of all filters and oil. A new inlet valve with a new solenoid valve has been fitted. The thermostatic valve has been overhauled with a new repair kit, as well as the minimum pressure valve, oil-stop valve, check valve with repair kits replaced, and the condensation drain valve has also been serviced. A new Elektronikon compressor control unit has been installed. The hydraulic hoses have been replaced and the oil system has been cleaned. Delivery across Europe can be arranged. Fpodpfxoyxy Das Apweg

Condition: new, functionality: fully functional, operating pressure: 200 bar, high-pressure hose length: 10,000 mm, empty load weight: 43 kg, fuel: super 95, warranty duration: 24 months, Technical specifications: Pump capacity (l/h) 700 Operating pressure (bar) 200 Maximum pressure (bar) 250 Water connection R 3/4″ Drive type: Gasoline Engine type: G210FA High mobility Color: Anthracite Weight with accessories (kg) 43 Dimensions (L x W x H) (mm) 878 x 538 x 702 Scope of delivery: Kärcher Classic spray gun - M22 thread High-pressure hose: 10m Kärcher Classic lance 850mm Fpodpfew Exv Isx Apweg Power nozzle 25° Water filter Equipment: Protective frame Crankshaft pump with ceramic piston Independence: Independence from external power sources. Complies with EU Stage V emissions standards. Convenient manual start. High mobility: Large inflatable wheels for comfortable operation on difficult terrain. The compact and small device is very easy to maneuver even in tight spaces. Fits in a car. Solid and durable device: The sturdy tubular construction protects the pump from damage. A thermal valve protects the pump from overheating during circulation mode. A crankshaft pump with ceramic pistons. The compact Kärcher HD 7/20 G Classic high-pressure cleaner without water heating is the ideal choice for beginners using gasoline-powered devices. The device can be easily transported in a car and enables the successful completion of even the most demanding cleaning tasks, for example, on a construction site or in municipal areas. The device offers a working pressure of up to 200 bar and is equipped with a durable crankshaft pump and a pumping capacity of 700 liters per hour. An integrated gasoline engine (EU STAGE V), which allows the device to operate independently of external power sources, inflatable wheels that ensure the necessary mobility on site, an ergonomic handle for easy transport, and practical storage space for accessories ensure user-friendly operation. Important parts are easily accessible for maintenance and effectively protected by thermostatic and safety valves. The HD 7/20 G Classic's sturdy steel frame also prevents external and mechanical damage. The unit does not have the ability to draw water from alternative sources.

Condition: ready for operation (used), working width: 2,100 mm, product height (max.): 50 mm, working length: 1,100 mm, Gluing press Make: Polzer Type: EVA Gluing star with 6 gluing levels, each with 2 special heating plates Gluing size 2100 mm x 1100 mm With glue application station With 2 lifting devices for loading and unloading the plates With roller conveyor Workpiece thickness max. approx. 50 mm For removal, the plate is lifted pneumatically Per level: 7 pneumatic pressure cylinders, 100 mm diameter, Fjdpfxewr Tyzs Apwspg 100 mm stroke, pressing force 740 kg per cylinder, moving pressure plate 250 mm x 40 mm 2 cylinders to operate the upper heating plate Insertion opening 700 mm 2 electric heating plates Each heating plate 220/380V, 3 kW, thermostat 0 – 120°C Operating pressure 8 – 10 bar Bonding temperature adjustable, ideally 50-65° Performance approx. 50 m²/h With safety guard External dimensions approx. 4000 mm x 4000 mm x 3600 mm

Condition: new, Year of construction: 2025, TEMP 90 W9 SSR General information: maximum 90 ° C water temperature range -robustes steel sheet housing device on wheels Hydraulic: Immersion pump (make Bacon) with pressure / vacuum function (leak stop operation) -Qmax. 60 l / min Pmax. 3.8 bar Fsdpfod Aaruex Apwspg Tank and heater made of stainless steel Heating power 9 kW tank capacity 12 liters Fittings made of brass/stainless steel-automatic water filling -electrical level indicator -indirektes cooling system (plate heat exchanger) Cooling capacity ~ 40,000 kcal / h (10 sheets) Display gauge -integrated bypass Solenoid valves for cooling and recovery Electrical and control: -Electronic, self-optimizing PCB control Control voltage in the unit 24 V AC -Akustische and visual alarm indicator -Solid state relays Safety thermostat Sensor break monitoring Monitoring of tube breakage and leakage Connection cable with plug -Dimensions: 295 x 575 x h495 mm -Weight: 40 kg

Condition: used, Year of construction: 2004, functionality: fully functional, Grape fermenter with a capacity of 15 cubic meters (15 000 liters), in very good condition. It has a water jacket and an agitator with an electric motor. There are 4 units available, the price is for one piece. If you purchase more than one unit, price can be negotiated. TECHNICAL DATA: Volume: 15 m³ (15000 liters); Type: Vertical; Material: Stainless steel, food grade; Diameter: 3100 mm; Height of the body with legs: 5000 mm; Year of production: 2004; Manufacturer: PIM-Haskovo With electric motor and agitator, Power: 4.1 kW, Electrical supply: 380/220V, 50Hz, IP54 protection Fsdpfx Aoy It Ukopwspg Built-in thermostat and temperature control panel with a water jacket.

Condition: used, mileage: 6,092 km, power: 28 kW (38.07 HP), gearing type: mechanical, fuel type: diesel, color: blue, empty load weight: 2,340 kg, number of seats: 1, first registration: 01/1963, total length: 1,720 mm, total width: 1,730 mm, driver cabin: other, Vehicle location: Bovenden, The Granit 500 is a tractor produced by Hanomag in the 1960s, which replaced the R 332 Granit. In the course of its production time, the engine power was increased to 40 hp by increasing the engine speed. Another year later, the design of the hood changed. Water-cooled four-stroke three-cylinder diesel engine, type D21 CR with swirl chamber process, wet cylinder liners, oil bath air filter, crankshaft with four bearings, suspended conical valves, pressure circulation lubrication, strainer jacket filter, centrifugal governor and thermostatic dual-circuit cooling. Engine was overhauled approx. 150 operating hours ago! Approx. 2,000.00 EUR for engine and technology r original condition ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Fedpfx Ajvhh Aqjpwopg - .

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: Fabr. Nr. 281007 - 0125, total width: 900 mm, total length: 1,800 mm, total height: 1,250 mm, type of input current: three-phase, volume flow: 1,150 m³/h, nominal heat output: 90 kW (122.37 HP), Equipment: type plate available, We are selling our warm air heater with room thermostat, Kroll M 100, 90 kW, year of manufacture approx. 2000, age-appropriate good condition. Fully functional. Additionally, the following pipes and bends are available for purchase at an extra charge: - 7 pcs. spiral duct, diameter 355mm, length 2000mm - 1 pc. spiral duct, diameter 355mm, length 1000mm - 2 pcs. spiral duct, diameter 180mm, length 2000mm Fedpfx Aoxv Akzepwjpg - 1 pc. Y-piece with gasket, 45°, length 800mm - 6 pcs. bend with gasket, diameter 355mm, 45° - 1 pc. bend with gasket, diameter 355mm, 90° - 1 pc. reducer, diameter 560/355mm, length 550mm - 8 pcs. sleeve, diameter 355mm - 4 pcs. connector with gasket, diameter 355mm The pipes have previously been installed and riveted.

Condition: new, ESP Top Loading Spray Washing Machines ESP series are designed for efficient cleaning of industrial parts with pressurized hot water plus a biodegradable detergent. The ESP range has very low operating cost and consumption, the body and structure is made entirely of corrosion free stainless steel material and heavy duty components. This type of machine is correct choice for cleaning oil, grease, production residues off the surface of parts and anticorrosive protection applications. The ESP range of spray washers are supplied with a stainless steel pump, nozzles, heaters and motorised basket as standard features. - Top opening gas spring assisted machine lid - Motorised stainless steel component basket - Stainless steel spray bar assemblies above, below and at the side Fodpfxsd Hbp As Apwjpg - Integral fluid filtration system - Basket jog feature - Chemical & corrosion resistant stainless steel pump - Electrical powered fluid heating On customers demand these machines will also be built with a drying air blower. Depending on Top-Loader model: Basket diam. 820 - 1250 mm, loading weight 80 - 300 kg, spray pressure 1,8 - 3,5 bar (27 - 52,5 psi), heating: 4,5 - 12 kW, Options: digital timer and thermostat, oil skimmer, filtration, stainless steel loading car

Condition: new, ESP Top Loading Spray Washing Machines ESP series are designed for efficient cleaning of industrial parts with pressurized hot water plus a biodegradable detergent. The ESP range has very low operating cost and consumption, the body and structure is made entirely of corrosion free stainless steel material and heavy duty components. This type of machine is correct choice for cleaning oil, grease, production residues off the surface of parts and anticorrosive protection applications. The ESP range of spray washers are supplied with a stainless steel pump, nozzles, heaters and motorised basket as standard features. - Top opening gas spring assisted machine lid - Motorised stainless steel component basket - Stainless steel spray bar assemblies above, below and at the side - Integral fluid filtration system - Basket jog feature - Chemical & corrosion resistant stainless steel pump - Electrical powered fluid heating Fsdpfxet Rrks Apwjpg On customers demand these machines will also be built with a drying air blower. Depending on Top-Loader model: Basket diam. 820 - 1250 mm, loading weight 80 - 300 kg, spray pressure 1,8 - 3,5 bar (27 - 52,5 psi), heating: 4,5 - 12 kW, Options: digital timer and thermostat, oil skimmer, filtration, stainless steel loading car

Condition: not inspected (used), Year of construction: 1975, Power supply 400V 13kW 2 heating plates à 1200 x 2250 mm heating plates controlled by 2 thermostats pressing pressure at 250 bar LxDxH: 2590 x 1330 x 1950 mm weight approx. 2800 kg pressing thickness 380 mm Fpodpfx Apskkflbswog

Condition: good (used), Year of construction: 2021, machine/vehicle number: 22112P114, Offer 24107 Technical data: - Pump station unused in mint condition - Pump make DELIMON type FZ-B 3.75 ccm/m. - Flow rate 7.6 cm³/min Fedpfetyli Nsx Apwspg - Pressure capacity up to 200 bar - Lubrication unit fill level - thermostat - fan - 400 V electrical connection - installed in RITTAL switch cabinet with hinged lid and two hinged doors - Space requirement approx. W 1100 x H 1100 x D 500 mm - Weight approx. 100 kg

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, total length: 5,500 mm, total height: 2,000 mm, total width: 1,400 mm, type of input current: three-phase, product height (max.): 400 mm, product width (max.): 650 mm, compressed air connection: 6 bar, film width: 650 mm, Manufacturer: Kallfass Verpackungsmaschinen GmbH Model: Super Wrap 650 De Luxe In-Line Bundling Machine Year of manufacture: 2009 Dimensions: approx. 3160 x 1340 x 2000 mm (LxWxH) Weight: approx. net 570 kg / gross 620 kg Technical specifications: Film: Flat film, up to approx. 120 µm Film roll width: max. upper 650 mm, lower 620 mm Working height: 815 - 915 mm Passage width: 650 mm Passage height: 100 - 400 mm Power supply: 400 V three-phase Rated current: 7.2 A Compressed air connection: 6 bar Compressed air consumption: approx. 20 L/cycle This particularly versatile bundling machine operates with two flat film rolls. Product infeed is fully automatic via an in-line conveyor belt. The sealing system is permanently heated, thermostat-controlled, and therefore maintenance-free. Film rolls are simply placed, and film feeding is motor-driven. Manufacturer: Kallfass GmbH Model: Shrink Tunnel Standard 650 NT Year of manufacture: 2009 Fpedpoxxlhnsfx Apweg Dimensions: approx. 2400 x 1400 x 1550 mm (LxWxH) Weight: approx. net 750 kg / gross 820 kg Technical specifications: Tunnel passage width: 650 mm Tunnel passage height: 400 mm Tunnel outfeed, extended: approx. 500 mm Working height: 800 - 900 mm Power supply: 400 V three-phase Rated power: 26.5 kW Rated current at 400V: 38.5 A in stand-alone operation Powerful, universally applicable shrink tunnel with laterally adjustable air flaps and externally adjustable outlet openings underneath for precise control of hot air flow, ensuring optimal shrink results even with challenging product contours. The recirculating air system, tunnel hood with additional double-chamber system, and significantly improved all-round insulation ensure energy-efficient operation. Equipped with infinitely adjustable rod chain conveyor. Inspection and demonstrations are possible at our premises by appointment. Function guarantee, no warranty.

Condition: refurbished (used), Year of construction: 2017, functionality: fully functional, Manufacturer: Kallfass Verpackungsmaschinen GmbH Type: Bundle Wrapping Machine Super Wrap 500 Year of manufacture: 2017 Dimensions: approx. 2160 x 1340 x 2000 mm (LxWxH) Weight: approx. net 570 kg / gross 620 kg Technical data: Film: flat film, up to approx. 120 µm Film roll width: max. top 550 mm, bottom 550 mm Working height: 815 - 915 mm Passage width: 500 mm Passage height: 400 mm Electrical connection: 400 V three-phase Rated current: 7.2 A Fpjdsxl Dp Djpfx Apweg This particularly versatile banding machine operates with 2 flat film rolls. Product feed is fully automatic via an in-line conveyor belt. The sealing system is permanently heated, thermostat-controlled, and thus maintenance-free. The film rolls are simply placed on the machine, film feed is motorised. Inspection and demonstrations are possible at our premises by prior arrangement. Functional guarantee, no warranty.

Condition: new, Year of construction: 2025, total height: 4,000 mm, total length: 7,000 mm, total width: 3,000 mm, warranty duration: 24 months, temperature: 80 °C, air demand: 36,000 m³/h, input voltage: 380 V, heating capacity: 345 kW (469.07 HP), power: 40 kW (54.38 HP), fuel: liquid petroleum gas (LPG), energy consumption: 40 kWh, insulation material: Mineralwolle, insulation thickness: 50 mm, nominal power: 345 kW (469.07 HP), Equipment: lighting, MAIN STANDARD Our paint booths are designed to meet all necessary requirements for paint application, including air filtration, extraction, lighting, and a controlled environment. Booth processes are managed via a PLC system, ensuring that desired values are maintained consistently. Fedewzmcbjpfx Apwepg OPERATING PRINCIPLES OF THE BOOTH The booth’s processes are managed through a control panel, which oversees the following steps: PAINTING PROCESS During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled through the extraction unit. Floor filters (paint stop filters) collect paint particles, and the air passes through final exhaust filters before being discharged. FLASH-OFF PROCESS After painting, the booth continues operating for approximately 15 minutes to purge residual solvents and thinners. During this phase, fresh air circulates from outside into the booth. DRYING PROCESS In this stage, 80% of the air passing through the booth is heated to 60°C and introduced via a distribution system. Since 20% of the solvent is released during drying, it is expelled with the exhaust air. Industrial coatings are typically dried at 60°C, but the booth temperature can be adjusted as needed via the control panel. COOLING PROCESS After the 30-minute drying cycle, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the subsequent 5-minute cooling phase, fresh air from outside circulates through the booth, after which the system shuts down automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT These control panels govern the functions and operation of machines and devices housed within the booth. The panel is made of durable galvanized sheet and steel profiles and is fully enclosed to protect against dust and moisture. Electrical Equipment and Control Panel: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control connections between the control panel and motors or other electrical devices. • Electrical wiring is designed to accommodate booth relocation if needed. • Operating equipment uses 380 V 50 Hz, while control devices operate at 220 V. • The booth’s operation time can be monitored on the electronic control panel, enabling straightforward maintenance scheduling. • Temperature and time settings for booth ventilation (solvent flash-off), intermediate drying, and final drying can be easily adjusted to required values on the digital display of the electronic control panel. • Users can monitor and adjust the drying time using the heating thermostat and time relay.

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 400 V, warranty duration: 12 months, total height: 210 mm, total length: 1,560 mm, total width: 645 mm, overall weight: 60 kg, input current: 16 A, power: 4.5 kW (6.12 HP), New unit 12 months warranty Advantages: + excellent baking quality with top price-performance ratio + robust, durable stainless steel construction + incl. 2 open immersion baskets for manual turning of products, such as donuts, apple fritters, curd balls, etc. Fodpfx Aow Ra N Espwspg + manual thermostat + easy cleaning & maintenance Technical data: - Capacity: max. approx. 24 pieces (depending on product) - Dimensions: --- Footprint: 880 x 645 mm (W x D) --- Overall: 1560 x 645 x 210 mm (W x D x H) - Power: 4.5 kW - Connection values: 400 V - 3Ph - 50Hz - 16A CEE plug - Net weight: 60 kg

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 400 V, warranty duration: 12 months, total height: 1,075 mm, total length: 2,315 mm, total width: 820 mm, overall weight: 195 kg, input current: 32 A, power: 9.2 kW (12.51 HP), New device 12 months warranty Advantages: + Excellent baking quality at a top price-performance ratio + Robust, durable stainless steel construction + Manual thermostat + Electric lifting and lowering of the basket via push buttons + With drip table, left side of the device (optionally right), foldable + Equipped with a foldable steam lid + Easy cleaning and maintenance + Includes 1 six-row turning basket for easy turning of Berliners (doughnuts) + Includes 1 proofing trolley equipped with 10 tilting trays Special accessories, available at an extra charge on request: - Open dip basket, e.g. for donuts, curd balls, apple fritters, etc. - Five-row turning basket for larger dough pieces Fpodpfxew Skz Io Apwog - Proofing trolley with 8 or 9 tilting trays (greater spacing between trays) Technical data: - Capacity: max. approx. 60 pieces (depending on product) - Dimensions: --- Footprint: 1243 x 820 mm (W x D) --- Overall: 2315 x 820 x 1075 mm (W x D x H) - Power: 9.2 kW - Electrical connection: 400 V - 3Ph - 50Hz - 32A CEE plug - Net weight: 195 kg

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 400 V, warranty duration: 12 months, total height: 1,075 mm, total length: 2,315 mm, total width: 820 mm, overall weight: 220 kg, input current: 32 A, power: 10.4 kW (14.14 HP), New device with proofing cabinet 12 months warranty Benefits: + excellent baking quality at a top price-performance ratio + robust, durable stainless steel construction + manual thermostat + electric lifting & lowering of the basket via push buttons + with drip tray, left (optionally right) of the device, foldable + equipped with foldable steam lid + easy cleaning & maintenance + incl. 1 reversible basket, 6-row, for easy turning of Berliners Fpedpfx Aew Sk H Repwjg + incl. 1 proofing trolley equipped with 10 tilting trays Special accessories, available at extra cost upon request: - open immersion basket, for e.g. donuts, curd balls, apple pancakes, etc. - 5-row reversible basket, for larger dough pieces - proofing trolley with 8 or 9 tilting trays (greater spacing between trays) Technical data: - capacity: max. approx. 60 pieces (depending on product) - dimensions: --- footprint: 1243 x 820 mm (W x D) --- overall: 2315 x 820 x 1075 mm (W x D x H) - output: 10.4 kW - connection values: 400 V - 3Ph - 50Hz - 32A CEE plug - net weight: 220 kg