Used Thomson Friction Welding for sale (5,643)

Condition: used, functionality: fully functional, Good day. Hjdpfxexr Dkne Aacew For sale is a used Merkle TIG 254 DC. A new inspection has been carried out, with the following components replaced: The circuit boards The AC fan The solenoid valve The red quick coupling The blue quick coupling The coolant

Condition: good (used), Medium frequency 1000 Hz spot welding machine, 400 V 50 Hz Make: DALEX Model: PMS 11-4 MF Arm reach: 950 mm with double-acting cylinder Rated power at 20% duty cycle: 180 kVA Secondary short-circuit current: 37 kA Hjdpsvyk Sfefx Aacow Secondary open-circuit voltage: 9 V Electrode force: 60-600 daN Weight: 550 kg

Condition: new, welding current 10 - 200 A connected load frequency 230 V weight 6,5 kg Hjdpfx Aajxq Hhmjcsw Dimensions (LxWxH) 380 x 120 x 250 mm TIG Welder AC/DC, Pulse Demo unit in aluminum box Includes all accessories See images

Condition: ready for operation (used), On offer here is a bellied welding machine from Seleco type Genesis. The device is in good condition and was still in use 2 weeks ago. The device is being sold without the hose package, which was stolen from me a few days ago. The device can be tested on site if the buyer brings a suitable hose package. 1x SELCO Genesis 260GSM 1x SELCO type WU 14 1x transport trolley !!!Without hose package, as shown!!! Welding current max. 260 A 260 A at 60% ED 201 A at 100%ED Remote control SELCO RC08 Space requirement L - 560 x W - 240 x H - 400 mm Hedjxfzr Nepfx Aacow Weight approx. 37 kg

Condition: good (used), Inert gas welding machine with pulse function, pulse-arc welding system, MIG/MAG pulse welding system -with: 3 hose packages (1x aluminum, 1x stainless steel, 1x steel) Hodpsd I U Dwjfx Aacsw -Max. welding power: 330 A -Equipment: remote control connection, with removable wire feed, including ground cable, gas fitting -Wire feed: 4-roller drive -Cooling: Water-cooled -Dimensions: 655/900/H1490 mm -Weight: 160 kg

Condition: used, Year of construction: 2019, Welding machine Manufacturer: Merkle Model: HighPulse 552 RS Hjdpewvt Rnofx Aacsw Year of manufacture: 2019 Water cooling Wire feeder and torch incl. Binzel shut-off safety device Welding machine suitable for robot operation only, not for manual use!

Condition: as good as new (ex-display), Year of construction: 2025, SRF master figure left Hjdjdqzbrepfx Aacow 2 m suction arm Scope of application Low smoke and dust Sporadic usage Use Little run the extractor hood required Flexible by additional hose connection rear Properties Safe operation through filter monitoring Extractor hood 360 degree rotating and swivelling Push handle and cable holder Procedure filter type disposable filter filter surface approx. 12 m² ᐳ 99% filtration efficiency 3-stage filter material glass fibre welding smoke off vagina class W3 Additional filter two prefilter basic data suction capacity Max 950 m ³/h diameter extraction arm Ø 150 mm length extraction arm 2 m diameter suction connection Ø 150 mm electrical connection 230 V / 50 Hz motor 1,1 kW sound pressure level 72 dB(A) dimensions (W x D x H) 705 x 655 x 900 m m weight approx. 71 kg

Condition: used, From business liquidation: Cloos GLC 451-B Device has been function-tested! 450 Ampere capacity at 60% duty cycle Year of manufacture: 1997 4-roll wire feed Water cooling 2/4-stroke 8-meter intermediate hose package Torch 4 meters + wire + ground cable Without pressure regulator Approximate dimensions (mm): 1140x460x1020 Hsdpfx Aoxq Rdrsacow

Condition: new, welding current 10 - 200 A connected load frequency 230 V weight 8,6 kg Dimensions (LxWxH) 380 x 120 x 250 mm TIG Welder AC/DC, Pulse Hodpfxoxq Hhgo Aacew Demo unit in aluminum box Includes all accessories See images

Condition: used, Year of construction: 1986, table length . mm Hsdpfx Aajucguiecew table width . mm table load 3 t turning speeds Poti U/min weight of the machine ca. 2 t

Condition: good (used), 1 MIG/MAG welding machine Hsdpfx Aasxpf N Tecsw Manufacturer: Merkle Model: MobiMIG 320 K Technical specifications: Input voltage: 3 x 400 V Adjustment range: 25 - 320 amps Duty cycle: 40% at 300 amps, 60% at 270 amps, 100% at 240 amps Current adjustment: stepless Cooling: Inverter cooled by integrated fan; Torch: gas-cooled Design: portable assembly unit Wire feed mechanism: 4-roll drive DV 26 Fuse protection: 16 amps Dimensions: 600 x 300 x 565 mm

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 1 h, functionality: fully functional, warranty duration: 24 months, type of cooling: water, hose package length: 4,000 mm, welding current at 60% duty cycle: 180 A, welding current at 100% duty cycle: 140 A, protection type (IP code): IP23, welding current (min.): 1 A, welding current (max.): 220 A, Equipment: type plate available, For sale: OTC DTX 2200 1A – 220A 30% 220A 60% 180A 100% 140A 230V 50/60Hz Pulse – Fast Pulse (0,5-500 Hz) – Ultra Fast Pulse (500-2000 Hz) ColdTack (0,01 – 10,0 Sec) Pre gas (0,05 – 1,00 Sec) Post gas (0,5 – 25,0 Sec) Up Slope (0 – 5,0 Sec) Down Slope (0 – 8,0 Sec) Start current (5 – 220A) End current (5-220A) IP23S IEC 60974-1 IEC 60974-10 Hsdpfx Aasxk Taiscew IEC60974-3 Steel – Stainless Steel Weldable Including: SR26 U/D 4M TIG Welding Torch Earth work cable 35mm² 4 Meter with clamp Gas hose Pressure regulator 24 Months Warranty Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: as good as new (ex-display), Year of construction: 2025, SRF Maxi. (Picture on the right) 3 m suction arm Scope of application Medium smoke and dust Regular usage Use Little run the extractor hood required Contamination free filter change Safe operation due to phase sequence detection High efficiency due to long Service life of the filter Properties Safe operation through filter monitoring Extractor hood 360 degree rotating and swivelling Automatic start/stop system (optional) Workplace lighting (optional) Technical data Procedure 2-speed Filter type disposable filter Filter surface approx. 20 m ² Hedpfxodqzcvs Aacew ᐳ 99% filtration efficiency Filter material of non-woven polyester Welding smoke off vagina class W3 Additional filter pre-filter (ALU knitted fabric) Basic data suction capacity Max 1,100 m³/h Extraction arm diameter Ø 150 mm Extraction arm, length 3 m Diameter suction connection Ø 150 mm -. Power supply 3 x 400 V / 50 Hz Motor 1,1 kW Noise level 70 dB(A) Dimensions (W x D x H) 790 x 815 x 1080 mm Weight 71 kg approx. 120 kg

Condition: used, From company closure: Esab LAW 400 The unit has been function tested! 350 amperes output at 60% duty cycle Welding range 30–350 amperes 4-roll wire feed Water cooling 2/4 stroke Torch 4 meters + wire + ground cable Without pressure regulator-- Dimensions in mm approx. 1400x630x1020 Hodpfexq Rdfsx Aacsw

Condition: new, table length 2990 mm table width 1490 mm Hsdpfoxpxrhjx Aacow table height 850 - 900 mm weight of the machine ca. 0,8 t Welding table / perforated table: with milled and deburred holes Hole diameter: 28 mm The table is made of 15 mm thick, high-alloy steel S355 JR T=15 The surface is untreated. Side panels 165 mm Height adjustable from approx. 880 - 980 mm Ribbed underside for reinforcement. Including floor bearings Accessories optional! Surface flatness 0.2 - 0.5 mm over 1000 mm.

Condition: like new (used), Fronius used -TPS4000CMT / TransPuls Synergic 4000 CMT R - cooling unit FK4000-RFC (4,045,837,632) water cooled Hjdpfx Aajpa N Aascow - RCU5000i remote control Univ.SD (4,046,098) - VR7000 CMT R (4,045,963,000 - Angle encoder CMT (43,0001,1219) with robot hose package kPL Robacta - Interface Interbus Rugged Line(4,045,885) (optional Profibus and Profinet connections available)

Condition: good (used), Offer 25349 Hedoxtazropfx Aacow Technical data: - Length approx.: 3000 mm - Width approx.: 2000 mm - Ribbed plate height approx.: 400 mm - Top plate thickness approx.: 80 mm - Table height with substructure approx.: 820 mm - Weight approx.: 6500 kg

Condition: used, machine/vehicle number: 23500716, From business liquidation: Pulse welding system Kemppi Pro 4200 Evolution. The unit has been function-tested! 420 amperes power at 80% duty cycle. Welding range: 10-420A. Wire feed case Promig 530. MXE MLS control. 4-roller wire feed. Water cooling. 2/4-stroke operation. Torch 4 meters + wire, ground cable and pressure regulator. Dimensions in mm approx. 1260x440x1020. Hsdpfoxq Rcuox Aacsw

Condition: new, table length 2400 mm table width 1200 mm table height 850 - 900 mm weight of the machine ca. 0,65 t Welding table / perforated table: with milled and deburred holes Hole diameter: 28 mm The table is made of 15 mm thick, high-alloy steel S355 JR T=15 Hedpfxexpxrbj Aacew The surface is untreated. Side panels 165 mm Height adjustable from approx. 880 - 980 mm Ribbed underside for reinforcement. Including floor bearings Accessories optional! Surface flatness 0.2 - 0.4 mm over 1000 mm. The table can be moved with a pallet truck. Pallet truck is not included.

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 0650173823, overall weight: 87 kg, filter area: 10 m², Specification: Operating temperature range: 0–+50°C Operating voltage: 400V/50Hz Control voltage: 24V DC Connected load: 5 kW Max. blower air flow: 580 m³/h Max. achievable negative pressure: 37,500 Pa Hedpfxowq R Dbs Aacjw Max. device air flow: 520 m³/h Min. air flow: 100 m³/h The Fumator Minivac 500D is a compact and reliable extraction system that efficiently removes smoke, dust, and fumes from industrial workplaces. Its space-saving design allows for easy integration into various production processes. With its innovative technology, it ensures a clean and safe working environment while remaining pleasantly quiet and low-maintenance during operation.

Condition: excellent (used), Esab Fabricator EM 401i Technical Data: Water-cooled MIG/MAG inverter Continuously adjustable with 400 A output Duty cycle: 400 A at 60% 310 A at 100% Digital display on the power source 4-roll wire feeder Faricator Feed 304 2-meter intermediate hose package Includes earth cable, pressure regulator, and one spool of wire Hjdpfx Aexq N D Reacjw Weight: 107.5 kg Dimensions approx. 1300x500x1020 mm

Condition: used, Year of construction: 2021, functionality: fully functional, machine/vehicle number: 1010215351, overall weight: 95 kg, filter area: 10 m², control cabinet width: 530 mm, control cabinet length: 760 mm, control cabinet height: 1,130 mm, Specification: Operating Temperature Range: 0 – +50°C Hedowq Rvwjpfx Aacew Operating Voltage: 400V/50Hz Control Voltage: 24V DC Connected Load: 7.5 kW Max. Device Airflow: 750 m3/h Min. Airflow: 150 m3/h Max. Vacuum: 380 mbar The Fumator Minivac 500D is a powerful and reliable extraction system designed to effectively remove smoke, dust, and fumes from industrial work areas. Its compact design enables flexible integration into various production environments, while its efficient technology ensures a clean and safe working atmosphere.

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 3520173969, overall weight: 87 kg, filter area: 10 m², control cabinet width: 530 mm, control cabinet length: 760 mm, control cabinet height: 1,130 mm, Specification: Operating temperature range: 0–+50°C Operating voltage: 400V/50Hz Hjdewq Rt Aspfx Aacsw Control voltage: 24V DC Connected load: 5kW Max. blower air flow rate: 550 m3/h Max. achievable negative pressure: 37,500 Pa Max. device air flow rate: 500 m3/h Min. air flow rate: 100 m3/h The Fumator Minivac 350D is a reliable and efficient extraction system specifically developed for the removal of smoke, dust, and fumes in industrial work environments. Thanks to its compact design, it can be flexibly used in various production sectors.

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 0650173822, overall weight: 87 kg, filter area: 10 m², Specification: Operating temperature range: 0 to +50°C Operating voltage: 400V/50Hz Control voltage: 24V DC Connected load: 5 kW Max. blower air volume: 580 m3/h Max. achievable negative pressure: 37,500 Pa Max. device air volume: 520 m3/h Minimum air volume: 100 m3/h Hjdpfxjwq Ryve Aacjw The Fumator Minivac 500D is a robust and efficient extraction system, specially designed to reliably filter smoke, dust and fumes from industrial workplaces. Thanks to its space-saving design, it can be flexibly integrated into various production environments. The advanced technology ensures a clean and safe working environment, while operation remains quiet and maintenance is minimal.

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 0650173824, overall weight: 87 kg, filter area: 10 m², Specification: Operating temperature range: 0 to +50°C Operating voltage: 400V/50Hz Control voltage: 24V DC Hedpfswq Rzgjx Aacow Connected load: 5 kW Max. blower air volume flow: 580 m³/h Max. achievable negative pressure: 37,500 Pa Max. device air volume flow: 520 m³/h Min. air volume flow: 100 m³/h The Fumator Minivac 500D is a powerful and reliable extraction system designed to efficiently remove smoke, dust, and fumes from industrial work areas. Its compact design allows for flexible use in various production environments. With its advanced technology, it ensures clean and safe air quality while operating quietly and requiring minimal maintenance.