Used Thread Cutting Arm for sale (25,705)

Condition: used, Thread cutting head with chaser jaws, thread cutting stock, thread cutting machine, pipe thread cutter Csdpfxsc T Nx Ne Aflsrk -Inch threaded jaws: 1/2 "- 1 1/2" inches -Weight: 9.5 kg

Condition: used, Year of construction: 1978, Gewinde-Ø 52 mm threading length 500 mm thread pitch entsprechend Crodowt T Uhjpfx Aflsk Hohlspindel -Ø 54 mm spindle turning speed range 25 - 140 U/min turning speeds: 6 Stufen voltage 380 V / 50 Hz main drive motor 3 kW total power requirement 4,5 kW weight of the machine ca. 0,75 t dimensions of the machine ca. 1,0 x 1,8 x 1,4 m • with pneumatic workpiece clamping, • threading head Z 52, • cooling device, • 2 sets of chaser holder,size: Z52/2B, + 21B • 5 sets of chaser jaws,pitch 1 - 2,5 mm Machine is in a good condition.

Condition: good (used), max. tapping capacity, metric thread brass M33, cast iron M16, steel M14, incl. accessories Csdsibmn Espfx Afljrk

Year of construction: 1995, condition: ready for operation (used), 1 brought threading machine Manufacturer: Microtap Type: Megatap II Year of manufacture: 1995 Technical data: - Operating voltage, machine standard 230 V ± 10 % version microtap II - Frequency 50/60 Hz - Power consumption - Version G8/ 230 V 16 A / T (slow) - Compressed air unlubricated (ZAP - operation) min. 200 kPa (2 bar) max. 800 kPa (8 bar) - Compressed air unlubricated (MMS - operation) min. 400 kPa (4 bar) max. 800 kPa (8 bar) - Torque - Version G8 50 to 700 Ncm - Rotational speed - Version G8 300 up to 3.000 min-1 - Spindle stroke version Version G8 max. 85 mm - achievable thread depth version G8 max. 75 mm - achievable accuracy of depth measurement 0,1 mm (without consideration of the tolerance of the tool holder) Operating instructions Dimensions, weights - Dimensions over all approx.: (L (depth) x W x H in mm) Version G8/14/16 - with column 750 mm at max. adjustment travel 544 x 312 x 1047 - With a higher column, the height dimension increases by the difference of the column height. - Machine type Spindle Tool holder Version G8 Taper B12 SZS / Quick change system SWS1 Cjdpfsim Iqqox Aflerk Working ranges - Adjustment travel of the columns in Z-direction (without tool) Column type Version G5 Version G8 Version G14 /16 750 mm approx. 430 mm approx. 400 mm approx. 388 mm - Thread capacity (cutting) - Version G8 M 2.5 - M 8 (X5CrNi189) (Metric ISO standard thread; M 2.5 - M 10 (9SMn28)

Condition: new, Bernardo TM 36 BLO/ R 1200 Electric threading machine Technical specifications Threaded holes* M5 - M36 Tool holder GT 24 Speed max. 30 - 150 rpm Adjustable angle 0° - 90 Max. Working radius R 1200 mm Quick-change chuck DIN 376: M5-6 / M8 / M10 / M12 / M14 M16 / M18 / M20 / M22-24 / M27 / M30 / M33 / M36 Motor power 1200 W Voltage 230 V Weight approx. 35 kg * Material strength 400 N / mm2 Scope of delivery Operation via touchscreen Digital drilling depth display Micro spray system Blow-out device Quick-change holder Quick-change chuck according to DIN Codpfx Aopag R Reflsrk Electric motor 90° angle adjustment Mounting flange features With micro-spray system as standard for constant cooling and minimum cooling lubricant consumption Includes blow-out device for removing chips, providing an optimum view of the drill hole Includes quick-change chuck for using taps for through holes and blind holes Swivel motor unit for tapping at any desired angle between 0° and 90 Higher accuracy compared to manual tapping, thread is guaranteed to be at right angles (90°) High productivity, significant time savings compared to manual tapping Quick-change chuck with integrated slip clutch prevents the tap from breaking Includes swivel arm with large radius for easy positioning of the tap on the workpiece For tapping in steel, stainless steel, aluminum and non-ferrous metals Price: Base frame 900 x 600 mm with 2 drawers for TM series 830.00 € plus 19% VAT

Condition: new, High performance threading machine with lead screw and optimal safety device against tool breakage. Program for single or continuous cycle. Electronically controlled motor braking for single cycle. Easy lead screw change by quick coupling. Technical data UNIMAX 3T GL: Threading capacity: M 4 - M20 Codpfx Ajgv I Unjfljrk Thread per hour: 800 Normal drilling capacity: 28 mm spindle: MK 3 thread depth: 90 mm drilling depth: 120 mm throat: 260 mm spindle / table: 220 - 600 mm table surface: 420 x 390 mm T-slot width: 14 mm column diameter: 110 mm total height: 1.300 mm weight: 250 kg special motor: 0,9 kW Mains connection: 400 V / 50 Hz 9 spindle speeds: 95 / 160 / 200 / 350 / 420 / 450 / 750 / 900 / 1,650 rpm Standard packing: C - 160x75x125 cm Other accessories / options: Lead screw, tap holder, outfeed switch, forced-ventilated motor, die holder, flange quill, foot pulse button, two-hand start, LED machine light, minimum quantity lubrication system, base cabinet.

Condition: used, Thread cutting head with chaser jaws, thread cutting stock, Tapping machine, pipe thread cutter Crsdpsb A N I Nofx Aflok -Inch thread: 1/2"-2" inch -Weight: 15 kg

Condition: used, Year of construction: 1968, Gewinde-Ø 52 mm threading length 500 mm thread pitch entsprechend Hohlspindel -Ø 54 mm spindle turning speed range 25 - 140 U/min turning speeds: 6 Stufen voltage 380 V / 50 Hz Crodpjv N N Scsfx Aflok main drive motor 3 kW total power requirement 4,5 kW weight of the machine ca. 0,75 t dimensions of the machine ca. 1,0 x 1,8 x 1,4 m • with driven workpiece clamping, • threading head Z 52, • cooling device, • 2 sets of chaser holder, size: Z52/2B, + 21B • 5 sets of chaser jaws, pitch 1 - 2,5 mm Machine is in a good condition.

Condition: ready for operation (used), functionality: fully functional, overall weight: 785 kg, total width: 1,015 mm, total length: 1,570 mm, total height: 1,270 mm, type of input current: three-phase, input voltage: 380 V, metric thread diameter (max.): 80 mm, metric thread diameter (min.): 16 mm, thread length: 450 mm, rotational speed (min.): 14 rpm, rotational speed (max.): 94 rpm, metric thread pitch (max.): 6 mm, metric thread pitch (min.): 2 mm, HMV thread cutting machine, type OK-5 Specifications Credpfx Asxz R Husfljk Thread cutting range (Whitworth/UNC) 5/8"- 3" Thread cutting range (BSP) 1/2"- 4" Thread cutting range (Metric) M16-M80 Number of speeds 8 Speeds, rpm 14,20,28, 32, 40, 48, 64, 94 Motor output, hp 2.7 - 4.5 Motor output, kW 2.3 - 3.0 Motor speed, rpm 700 / 1400 Spindle bore, mm 118 Spindle bore, in 4 21/32" Max cutting length without relocation, mm 450 without relocation, in 17 3/4" with relocation infinite Dimensions and weight Overall length, mm 1570 Overall width, mm 1015 Overall height, mm 1270 Height from floor to bed, mm 830 Width of bed, mm 370 Required floor space, mm 1570 x 1015 Bed size (L x W), mm 815 x 580 Net weight, kg 785

Condition: used, Powerflex IV tapping machine Thread cutter M8 - M27 75 rpm - 900 rpm Projection: max. 1200mm radius Year of construction: 2008 You are welcome to come by for a viewing. We will be happy to arrange a cost-effective forwarding agent for you. organize! You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Credpfxsq U Sfps Aflek Subject to prior sale. Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved.

Condition: new, Hydraulic threading machine Dyas HTM 45 Thread diameter up to M 45 Speed 0 - 100 rpm thread M 10 - M 45 Working range 2050 Rmax. working height 920 mm table surface 900 x 700 mm oil capacity 100 l Engine power 5,5 kW Weight:315 kg Equipment: Cjdpfx Afjkhk R Sslork Hydraulic threading machine Incl. machine base with clamping disk Mobile Hydr. manometer Infinitely variable speed adjustment from 0 - 100 rpm Vertical / horizontal thread cutting possible Special accessories included / quick change inserts : M10 / M12 / M14 / M16 / M20 / M24 / M30 / M36 1 x adapter T-slot plate

Condition: new, High performance threading machine with lead screw device. Safety device against tool breakage. Programs for single and continuous cycle, programmable thread depth, piece counter, LED light and electronically controlled motor brake for the single cycle. Easy change of lead screw by quick coupling. Normal drilling capacity 15 mm Thread cutting capacity M 3 - M 10 Threads per hour 1.000 Spindle MK 2 Thread depth 60 mm Drilling depth 100 mm Throat 250 mm distance spindle/table 185 to 541 mm Table surface 340 x 445 mm T-slot width 12 mm Column diameter 90 mm Total height 1,050 mm Weight 120 kg Special motor 0,55 kW Codpfxjfrlnde Afljrk Power supply 400 V/50 Hz BT 18 GL M00033 4 spindle speeds 320 min-1 560 min-1 1,000 min-1 1,600 min-1 Also available as pillar drilling machine BS 18 GL (M00034)! Digital display for speed as standard. 200 mm longer column 14154

Condition: ready for operation (used), Ridgid 1224 Threading Machine, Thread Cutter, Used Machine Overall dimensions: Length: 1140 mm Width: 720 mm Height: 1110 mm Capabilities: Pipe threading: 1⁄4″ – 4″ (8 – 100 mm); 4″ – 6″ (100 – 150 mm) with 161 geared threading attachment. Bolt threading: 1⁄4″ – 2″ (6 – 52 mm). Features: Threads 1⁄4″ – 2″ pipe at 36 RPM and 2½″ – 4″ pipe at 12 RPM. Model 1224 is suitable for threading various types of pipes including black, galvanized, plastic-coated pipes, as well as stainless steel, IMC, and heavy-wall pipe and rod up to 30 Rockwell C hardness. Cedowwgvyepfx Afljrk Induction motor ensures noise levels remain within regulatory limits. Special capacitor start/capacitor run motor allows full-range threading even under voltage drop conditions. Uses a 1⁄4″ – 2″ universal die head and a 2½″ – 4″ adjustable die head to cut tapered or straight NPT/NPSM or BSPT/BSPP threads. Constant and proper lubrication of dies and workpieces via head-through oiling. Technical specifications: Motor: 1.1 kW, single-phase, 50 Hz, induction type. Switches: Reverse / Off / Forward heavy-duty rotary switch and integrated foot pedal. Spindle speed: 36/12 RPM. Gearbox: Two-speed transmission with 3:1 ratio. Chuck: Hammer-type with replaceable inserts. Rear centering device: Cam-operated. Pipe cutter: Model 764, fully self-adjusting and self-centering, with 1⁄4″ – 4″ F-229 cutting wheel. Reamer: Model 744, bladed type, 1⁄4″ – 4″. Lubrication: Through the die head. Pump: Self-priming, gear-type, automatic reversing, with constant flow.

Condition: new, Year of construction: 2024, operating hours: 1 h, functionality: fully functional, machine/vehicle number: 1024JT05VL, metric thread diameter (min.): 3 mm, metric thread diameter (max.): 16 mm, working range: 2,000 mm, overall weight: 19 kg, rotational speed (min.): 50 rpm, rotational speed (max.): 500 rpm, throat depth: 2,000 mm, table height: 870 mm, table width: 800 mm, table length: 600 mm, Equipment: documentation/manual, VOLUMEC JoyTap 3150 - Thread cutting unit M3 - M16 / 50-500 RPM incl. automatic tool lubrication incl. VASTC control for Joytap - Supportive control for thread cutting 1. NEW ALUMINUM STRUCTURE developed with EXCLUSIVE Volumec profile, which provides greater rigidity and precision compared to other models 2. Improved articulated arm mechanics for more smoothness and power 3. NEW GENERATION BRUSHLESS MOTOR (G2) with unmatched performance and reliability 4. INTEGRATED WIRING that does not limit mobility 5. VASTC TOUCH PANEL, the most advanced device on the market for screwing and thread cutting, updated with new functions and programmable torque (Nm) 6. MULTIDIRECTIONAL HEAD with automatic fixation 0-90° workpiece orientation 7. QUICK-CHANGE COUPLING SPINDLE THREAD CUTTING: • AUTOMATIC THREAD CUTTING (setting of pitch - depth - speed - torque Nm to protect the tools) • THREAD CUTTING with PROGRAMMABLE chip breakage • MANUAL THREAD CUTTING (set speed - torque (Nm) to protect the tools) • THREAD COUNTING is carried out • PROGRAM MEMORY, password protected • Simple PROGRAMMING via INTEGRATED INTERFACE • PROGRAM MEMORY for recurring applications • CONSTANT SPEED AND TORQUE when thread cutting thanks to rotary encoder WORK TABLE: Size: 800x600 Height: 870 Csdpfxevr U Une Aflork 30 mm base made of milled steel and T-slots in the inner compartment

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, SPECIFICATION MODEL HK-40 ROLLING FORCE(KN) 10-400 SPEED RANGE(RPM) 17-53 Crjdpsv Iapiefx Afljk MAX. DIE LENGTH(MM) 230 WORKPIECE DIA(MM) Ø4-Ø120 MAIN ENGINE(KW) 18 TOTAL POWER(KW) 21.3 MIN MAX TOOL DIA(MM) Ø160-Ø210 DIE SPINDLE DIA(MM) Ø69,85(Ø80 OPT.) MAX PITCH(MM) 7 SWIVEL ANGLE ±12 WEIGHT(KG) 4800

Condition: new, Hydraulic threading machine Easy Tap ETH 24 Thread diameter up to M 24 Speed 0 - 600 rpm thread M 5 - M 24 Working range 2050 Rmax. working height 920 mm table surface 900 x 700 mm Cjdskhmgispfx Aflerk oil capacity 100 l Motor power 3,0 kW Weight:220 kg Equipment: Hydraulic threading machine Incl. machine base with clamping disk Mobile Hydr. manometer Infinitely variable speed adjustment from 0 - 600 rpm Vertical / horizontal thread cutting possible Special accessories included / quick change inserts : M05 / M08 / M10 / M12 / M14 / M16 / M20 / M24

Condition: new, Year of construction: 2025, operating hours: 20 h, machine/vehicle number: Parmel_042025PA, Single Ply Cutter – Fabric & Textile Cutting Machine Our single ply cutters are the ideal solution for the precise cutting of textiles, leather, technical fabrics, and composite materials. With state-of-the-art CNC technology, they guarantee: • Maximum cutting precision for samples, prototypes, and series production • Flexibility for different materials and formats Csdpfx Asw N Rz Aeflork • Efficiency thanks to short setup times and automated processes Whether in the fashion, furniture, or automotive industry – our fabric & textile cutting machines deliver perfect results with maximum productivity. Model SC 1625 • Single-ply cutting up to 25 mm height • Working area (W × L): 1600 mm × 2500 mm • 2 cutting heads, double toolhead, needle punch kit, and plotting pen holder • Tool package: ERT, EOT, VPT (electric rotary knife, oscillating knife, punching module) • KIS (Knife Initialization System) • JWCS CAD/CAM Control Software • Vacuum pump • Air compressor • Passive roll feeder for non-elastic fabric • Parmel Cutting Software • 12-month warranty We provide installation, training, spare parts, consumables, and guarantee smooth operation both during and after the warranty period.

Condition: good (used), Year of construction: 2001, Polar Mohr 115 E Year: 2001 Pile turner PW-4-ABV Elevator Cedpfx Afsxzb Agjljrk 10.4" TFT color display Programmable with memory Side air table Unloader

Condition: good (used), Year of construction: 1985, cutting width (max.): 550 mm, Accessories Spare blades Crjdpfx Aoxpdm Reflek

Condition: reconditioned (used), Year of construction: 1995, functionality: fully functional, cutting width (max.): 1,370 mm, BM5150 Crsdjv Ic H Depfx Aflsk CUTTING LINE - refurbished: 1) Polar 137EMC-MON AT Guillotine 1995 2) Transomat Downstacker/Palletiser 3) Jogger With Air Removal & possibly Bizerba sheet-count-scale 4) Paper Lift Contact us for further info and for personal price negotiations

Condition: good (used), Polar Mohr 78 XS Paper Cutting Guillotine Machine in very good condition, after inspection, ready to work. Technical data: Cutting width 780mm Stack height 120mm LCD display Credpfx Aew D E R Nsflsk Full programmer Power supply 400V Weight 1400kg Side tables Chrome table surface Table backlight and optical cutting line Smoothly adjustable pressure force Additional covers for the rear table Spare knife, sticks, tapping block, operating tools.

Condition: good (used), Polar Mohr 115 EMC Paper Cutting Guillotine The machine is fully operational. Inspected and ready to use. Csdpfoxzul Uex Aflerk Technical specifications: Cutting width: 1150mm Stack height: 165mm Programmer Air table Photocells Side tables Additional rear table guards Weight: 3200kg 380V power supply Tool kit, safety knife change tool, tapping block, spare knife, and one in the machine.

Condition: good (used), Polar Mohr 56 ECO Guillotine Manufactured in 2013. Cedjxzumrjpfx Aflork The machine is ready for production, after a service. Mohr Polar is the most recognizable and highly valued brand of bookbinding guillotines in the world. Made in Germany. Working width: 560mm Stack height: 80mm Machine weight: 575kg Power supply: 230V Equipment: Programmer with a 5.5″ display and the ability to save 198 programs Chrome-plated table Photocells Intuitive operation Documentation, tools, spare knife, and cutting sticks.

Condition: good (used), Polar Mohr 115 XT Paper Cutting Guillotine This machine is in very good condition, ready for production, after a service inspection. Low mileage. Year of manufacture: 2010. This is the most valued guillotine brand, a flagship product. A jogging and elevator are available for retrofitting. Technical specifications: Cedpexzumxjfx Aflerk Cutting width: 1150mm Stack height: 165mm Programmer with a 15″ color touchscreen display Air table Photocells Chrome table surface Ball screw drive for the rear comb Optical cutting line Enlarged side tables Knife change via the control panel Additional rear table guards Weight: 3200kg 380V power supply Includes documentation, a tool kit, a tapping block, a spare knife, and one knife in the machine.

Condition: good (used), Polar Mohr N78 Plus Paper Cutting Guillotine Machine after inspection, ready to work. Like new. Year of production 2014. Crodpfx Afjwt Stcslek Technical data: Cutting width 780mm Stack height 120mm 21.5″ LCD display 400V power supply Weight 1400kg Enlarged side tables. Chrome table surface Table backlight and optical cutting line Smoothly adjustable pressure force Additional covers for the rear table. Spare knife, sticks, tapping block, operating tools.