Used Tig Welding Machinbary for sale (5,959)

Condition: new, table length 2400 mm table width 1200 mm table height 200 mm weight of the machine ca. 1,0 t Codpfxsgvkfye Abwshd The table Professional Extreme Article no. 4-280030.X7 2400x1200x200 mm has a hole arrangement in the 100 mm grid on the table top and a parallel hole arrangement in the 50 mm grid on the sides. The holes have a diameter of 28 mm and the table has a material thickness of about 24.5-27 mm. The table top is made of hardened tool steel. The low-loaded sidewalls are still made of steel S355J2 + N for cost reasons. Grid lines at a distance of 100 mm make it easier for you to set up your device. The welding tables are provided with scale as standard. Including 4x feet Basic equipment 650 Article no. 280858.X

Condition: new, 0,6 t -- mm -- mm consisting of: 30x article no. 2-280510 Quick release pin short - Clamping of 2 components - burnished - with twist lock 8x article no. 2-280410.N Universal stop 150 L - nitrided - nitrided - as standard with fine scaling on both sides 4x article no. 2-280420.N Universal stop 225 L - nitrided - nitrided - as standard with fine scaling on both sides 8x article no. 2-280110.G Stop and clamping angle 175 L - cast / black oxide finish - Hole / elongated hole - Cast / burnished 2x article no. 2-280162.N Stop and clamping angle 500 G - nitrided - Left stop - nitrided 1x article no. 2-280166.N Stop and clamping angle 750 G left - nitrided - Left stop - nitrided 1x article no. 2-280167.N Stop and clamping angle 750 G right - nitrided - stop on the right - nitrided 1x article no. 2-280910 Tool trolley - painted - Permissible total weight 240 kg 1x article no. 2-280164.N Stop and clamping angle 500 G with turning angle left - Left stop 1x article no. 2-280165.N Stop and clamping angle 500 G with right angle of rotation - stop on the right - Cast / nitrided 4x article no. 2-280152.N Stop and clamping angle 300 G - nitrided - Left stop - nitrided 8x article no. 2-280651.1. Prism Ø 60 135 ° with screwed-in collar - aluminum Cedpfx Ajgvq Hljbwshd - aluminum - M16 thread for e.g. B. Prism Extension Item No. 280649 16x article no. 2-280610.N Professional screw clamp - nitrided - nitrided 6x article no. 2-280630.N Professional screw clamp 45 ° / 90 ° - nitrided - nitrided 4x article no. 2-280426.N Universal stop 300 - nitrided - 3 system holes - nitrided

Condition: used, length 850 mm Chodpjvuz Srefx Abwsd height 975 mm total power requirement 10,5 kW weight of the machine ca. 175 kg dimensions of the machine ca. 850 x 450 x 1575 mm Technical data Continuously adjustable range [A] 10-300 Duty cycle (ED) at Imax. (10 min) [%] 80 Welding current at 100% ED [A] 270 No-load voltage [V] 75 Mains connection [V] 3/PE 400 Continuous power at 100% ED [kVA] 12.2 Fuse protection (slow-blow) [A] 20 Power factor [cos phi] 0.98 Insulation class H Torch cooling water-cooled Protection class IP 23 Wire diameter steel and stainless steel [ø mm] 0.8/1.0 Wire diameter aluminum 1.0/1.2 Sound level according to DIN 45635 [db (A) 1 m] 68 Equipment: - without accessories

Condition: new, number 100 Positionen 28 mm condition neu Cjdpfju Aw Ngox Abwshd weight 280 kg dimensions 1,2 x 0,5 x 1,3 m XXL starter package, consisting of: - 15x – standard clamping pliers - 5x – multi-clamp pliers - 10x – side tensioners with eccentrics - 15x – Loose cam H30 - 10x – Loose cam H100 - 2x – pipe insertion cam series - 10x – quick release bolts - 10x – stop block 15mm - 4x – Right Angle XL - 6x – Right angle - 6x – angle of attack - 1x – box - 1x – Insert holder - 1x – Allen key - Tool trolley

Condition: new, Table dimensions 1200 x 1200 mm table load 10000 Kg swivelling range 105 Grad turning speeds 0,07 x 0,6 U/min height adjustment 1450 - 2450 mm hollow spindle diameter mm welding current 1000 Ampere max. torque on the faceplate 20000 Nm total power requirement 12,1 kW dimensions of the machine ca. m Characteristics: • Made in EU • Self-locking gear, therefore no leading and trailing at eccentric load • Hydraulic height adjustment allows almost limitless positioning Chsdpfx Aevn Uwnobwjd • Electronic quality components from Schneider / Siemens / Delta • Frequency-controlled stepless speed of the turntable • High stability through a heavy and compact design • CE certificate • Very good value for money • Standard version comes with remote control and dual foot pedal • 3 years warranty (see warranty conditions) • Hydraulically height adjustable with locking system (for fall protection)

Condition: new, number 10 Positionen weight 30 kg condition neu 28 mm 5 screw clamps Chjdpfxsxwzfae Abwjd Thrust length 155 mm Length 300 mm Condition: new Hole diameter 28 mm

Condition: used, table diameter 790 mm table load 500 Kg swivelling range 0 - 135 Grad turning speeds max. 2,0 U/min connected load frequency 400 V weight 0,95 t Dimensions (LxWxH) 1,4 x 0,8 x 1,5 m Welding turntable incl. - Control column with foot switch - 630mm chuck - Chuck key Chedpfx Aoyx Ip Rjbwsd

Condition: used, Year of construction: 2022, operating hours: 1,100 h, functionality: fully functional, load capacity: 2,000 kg, arm reach: 2,400 mm, Equipment: documentation/manual, For sale is a like-new IGM RTE 478-S welding robot, manufactured in 2022! This is a 7-axis robot with a 9-meter travel range and two stations, each equipped with a 2-axis L-manipulator with a load capacity of up to 2000 kg. Robot type: RTE 478-S in a suspended position. Control system: Fully digital PC robot control system, type RCE. Welding process: Single-wire welding process. Welding equipment: Digital inverter welding power source TPS 500i. The system can be inspected and tested upon request. The robot was operated in a single-shift operation and has few operating hours! Chjdpfx Abs Ad R Eaewjd

Condition: ready for operation (used), Year of construction: 2026, functionality: fully functional, table width: 1,000 mm, table length: 2,000 mm, plate height: 15 mm, TECHNICAL DETAILS Cedpfx Aozxcmhjbwshd Table length: 2,000 mm Table width: 1,000 mm Table top thickness: 15 mm MACHINE DETAILS Material: Hardened metal Dimensions (L x W x H): 2,000 x 1,000 x 500 mm EQUIPMENT 4x 3D angle – 300 mm 6x Stop – 150 mm 6x Stop – 225 mm 1x Protractor 2x Prism 1x Eccentric 1x Flat angle 12x Clamping/tensioning screw 12x Clamp

Condition: excellent (used), For sale: Rowatec Genesis 160 welding machine. Chedpfx Aoz Sk Elsbwsd

Condition: used, functionality: fully functional, type of cooling: water, Equipment: documentation/manual, type plate available, The welding machine includes a Cool Midi 1800 cooling unit and a TA 24 control panel, complete with cables. It is fully functional and can be tested at our warehouse in Přerov. Cede Ah S H Hspfx Abwjhd

Condition: like new (used), Year of construction: 2020, Welding positioner table for sale Sale only within EU member states! No private sales. MAE can be inspected upon request. Cedpfx Aez Rxz Rebwshd All warranty rights are excluded. We assume no liability for the accuracy of the technical data and year of manufacture, for the completeness of accessories and tool equipment, or for compliance with all safety and environmental protection requirements mentioned in the accident prevention regulations.

Condition: ready for operation (used), Year of construction: 1992, Suction capacity: 1200 m³/h Maximum static pressure: 1350 Pa Electrical connection: 380 V, 0.75 kW Space requirement: 700 x 660 x 1030 mm Weight: Chodpfx Aoz Eq Ttobwjd

Condition: new, table diameter 690 mm table load 0,5/0,25 t swivelling range 0 - 90 motorisch Grad turning speeds 0,2 - 2,5 U/min spindle bore 100 mm Torque 375 Nm welding current 500 Ampere connected load frequency 230 Volt weight 290 kg Dimensions (LxWxH) 800 x 750 x 750 mm Welding turntable with Chodpfx Aefv Aykjbwed - Footswitch - tilt motor - Speed continuously adjustable - 500 amps welding current transmission

Condition: new, table diameter 1300 mm table load 3000 Kg swivelling range 0 - 130 Grad turning speeds 0,05 - 0,5 U/min height adjustment 1200 - 1800 mm max. torque on the faceplate 6000 Nm engine output 1,1 / 1,1 kW welding current 700 Ampere - Manual height adjustment. - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Load. Chsdpefv Ayysfx Abwsd - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. - High stability due to the robust construction. - CE certificate. The D-HBE series comes as a standard version with a cable remote control and a footswitch. Welding power transmission for max.500Ampere.

Condition: new, volume capacity 2500 m3/h 0 3000 mm total power requirement 1,1 kW weight of the machine ca. 0,08 t Csdpjfrzt Uofx Abwshd dimensions of the machine ca. 0,58x0,58x0,58 m

Condition: new, table length 1200 mm table width 1200 mm table height 850 mm Vertikal stroke 40 mm weight of the machine ca. 0,261 t dimensions 1,2 x 1,2 x 0,85 m Welding table "SIEGMUND Professional 750 + plasma nitrided" is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers. Cjdoftd T Sjpfx Abwjhd The table has a material thickness of approx. 11.5 - 13.0mm. The holes have a diameter of 16mm. Hole arrangement in 50 mm grid on the table top, parallel hole arrangement in a 25 mm grid on the sides. Including basic equipment. Table height 850mm Accessories shown are optional. Price plus packaging and transport.

Condition: new, table length 1000 mm table width 1000 mm table height 850 mm Vertikal stroke 50 mm weight of the machine ca. 0,3 t dimensions 1,0 x 1,0 x 0,85 m Welding table "SIEGMUND Professional 750 + plasma nitrided" is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 17-19.0mm. The holes have a diameter of 16mm. Hole arrangement in 50 mm grid on the table top, Csdpfogazl Uox Abwjhd Side walls 150mm with parallel hole arrangement in a 25 mm grid. Including basic equipment. Table height 850mm Accessories shown are optional. Price plus packaging and transport. Other dimensions available.

Condition: new, table length 3000 mm table width 1500 mm table height 850 mm Vertikal stroke 50 mm weight of the machine ca. 1,1 t dimensions 3,0 x 1,5 x 0,9 m Welding table "SIEGMUND Professional 750 + plasma nitrided" is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 17-19.0mm. The holes have a diameter of 16mm. Hole arrangement in 50 mm grid on the table top, Side walls 150mm with parallel hole arrangement in a 25 mm grid. Including basic equipment. Table height 850mm Accessories shown are optional. Price plus packaging and transport. Other dimensions available. Chedpegazmkofx Abwod

Condition: new, table length 1200 mm table width 800 mm table height 850 mm Vertikal stroke 50 mm weight of the machine ca. 0,19 t dimensions 1,2 x 0,8 x 0,85 m Siegmund workstation including 2 drawers Premium Light, through hardened tool steel X8.7, plasma nitrided and BAR coated. Drilling Ø 28 mm, drilling surface 100x100 mm grid. Material thickness approx. 15 mm With the new workstation from Siegmund, you can create your ideal workplace in a modular system. The Siegmund Workstation can be individually adapted and expanded to meet your needs and wishes. Whether sawing, drilling or welding - the absolute all-rounder in every workshop! Consisting of: 1x 004002 (Siegmund Workstation) 1x 804004.X7 (perforated plate) 1x 284030 (clamp holder) 1x 004020 (shelf) 1x 284035 (bolt and prism holder) 1x 004025 (tool wall including shelf) 2x 004210 (drawer) Cedpfxjga Nh He Abwjhd Spacer ring 800653.N is required for clamping with bolts 280510/280511.

Condition: new, table length 1500 mm table width 1500 mm table height 850 mm Vertikal stroke 50 mm weight of the machine ca. 0,8 t dimensions 1,5 x 1,5 x 0,9 m Chjdomhm Auopfx Abwjd Welding table "SIGMUND Professional 750 + Plasma-nitrided" is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 24.5-27mm. The holes have a diameter of 28mm. Hole arrangement in 100 mm grid on the table top parallel hole arrangement in 50 mm grid on the sides. Incl. Foot basic equipment. Pictured accessories optional. Price indication plus packaging and transport.

Condition: new, table diameter 350 mm table load 100 Kg swivelling range 90 Grad Cedpfx Asupw Nxobwehd turning speeds 0,2 - 2 stufenlos U/min table load capacity 50 kg. vertikal total power requirement 220 kW weight of the machine ca. 0,055 t dimensions of the machine ca. 0,46 x 0,4 x 0,42 m

Condition: new, number 93 Positionen weight 320 kg condition neu 28 mm dimensions 1,0 x 0,6 x 0,85 m Special 93-piece set, 28mm system Chodpfjyv I Eajx Abwod Includes tool trolley Material: Burnished high-quality steel Scope of delivery: see images

Condition: new, number 102 Positionen weight 320 kg condition neu 28 mm dimensions 1,0 x 0,6 x 0,85 m Special 102-piece set, 28mm system Includes tool trolley Csdpfx Aoyv I Hdjbwehd Material: Burnished high-quality steel Scope of delivery: see images

Condition: new, table length 2000 mm table width 1000 mm table height 900 mm table load 3000 Kg weight of the machine ca. 0,45 t dimensions 2,0 x 1,0 x 0,9 m Welding table / perforated table including accessory set WMT Basic-Set 2.0 The table is made of 25mm high-alloy, plasma-nitrided steel S355J2+N (St 52/3) Surface hardness 850 Vickers Surfaces that have been ground down and planed smooth. Hole diameter: 28mm, countersunk by 3mm Csdpfx Aboyv I Hwowjhd 100 x 100mm grid Side panels 200mm Hole spacing in the side panels 50mm, diagonal grid Height adjustable from approx. 830 - 890mm Substructure reinforced with 140 x 15mm flat steel Including base bearings, 110mm diameter