Used Tilting Machine for sale (66,674)

Condition: used, Year of construction: 1997, turning speeds 3.000 U/min grinding wheel diameter 150 mm table-size 380 x 220 mm T-slots 1x 0 3~220 / 380 V total power requirement 0,37 kW weight of the machine ca. ca. 150 kg dimensions of the machine ca. 0,7 x 0,6 x 1,25 m Bjdpo Ahkgwjfx Aiweww Turning Tool Grinding Machine GREIF - DHL K-0

Condition: used, Year of construction: 2016, weight of the machine ca. 5200 kg Bsdpfx As Ahklmjiwoww

Condition: used, Servo press brake SAFAN Type SMK-P 50-2550 TS1 Downstroke bending machine with 4-axis CNC control Serial No. MK 285 Year of manufacture: 1998 CNC control SAFAN software version 5.07 TS1 Press force: 500 kN (50 tons) Working length: 2550 mm Stroke: 215 mm Clearance between side frames: 2700 mm Tool installation height: max. 414 mm Table width: 55 mm Table height above floor: 950 mm Approach speed: approx. 75 mm/s Return speed: approx. 75 mm/s Working speed: approx. 1.6 to 15 mm/s Motor power: 9 kW Bjdpfx Aoxpqy Djiweww Power supply: 400 Volt, 50 Hz, 9 kW - 4-axis CNC control SAFAN software version 5.07 TS1, Y1 and Y2 axis for ram - 2-axis backgauge, X-axis (backgauge depth adjustment), R-axis (backgauge height adjustment) - 2 backgauge fingers, laterally adjustable by hand (Z1, Z2) - Ram drive via 2 servomotors and belt drive - Working speed steplessly adjustable - Operation via electric foot switch and/or two-hand control panel - 13 clamping holders for the upper tool (UKB system, type 50.571, UKB System A) - Tool holder for lower tool, 55 mm wide with 13 mm groove, 21 mm groove depth (Trumpf system or UKB System B) - Supplied without bending tools (a new set from UKB costs approx. 3,600 EUR net) - Displayed total operating hours = 8,120 h - Number of working strokes: 1,049,789 strokes Space requirements (L x W x H): 3450 x 1850 x 2650 mm Weight: 5,000 kg Good condition

Condition: used, Swing bending machine with additional segmented upper tool, gooseneck rail. Swing bending press brake FASTI type 2095-25-2.5, serial no. 94 295 004, year of manufacture 1994. Working length 2540 mm, max. sheet thickness 2.5 mm, upper beam stroke 380 mm, bending beam motor power 2.2 kW, power supply 400 Volt, 50 Hz. - NC control FASTImatic FM100 - one-piece sharp rail 135° - additional segmented upper tool, gooseneck rail - controlled backgauge - continuous stop rail - controlled bending angle via control - electric foot switches. Weight 3000 kg. In good condition. Bwjdpfx Aettc Uaeiwsw

Condition: as good as new (ex-display), Year of construction: 2024, bore capacity in steel (diameter) 32.0 mm throat 230 mm bore stroke 120 mm morse taper 3 MK table: 400 x 320 mm turning speeds 105 - 1725 U/min total power requirement 1.2 kW weight 245 kg range L-W-H 470 x 810 x 1710 mm Furnishing: - Compact, stable cast iron construction in a modern design - Infinitely variable speed control - is changed The speed is read on a digital display Bedpfx Aiow U U N Iewoww - Table height adjustment via rack and crank - Right and left rotation of the quill for thread cutting - Powerful 2-stage motor, speed range from 105 - 1725 rpm - Base plate with T-slots for clamping high workpieces - Safety switch with undervoltage release - The spindle runs in the precision ball bearing scope of delivery - Key chuck 1 - 13 mm / B 16 - Drill chuck arbor MK 3 / B 16 - Reducing sleeve MK 3/2 - Digital speed display - LED machine light - Height-adjustable protective cover

Condition: good (used), functionality: fully functional, Year of construction: 2019, operating hours: 25,995 h, control type: CNC control, degree of automation: automatic, controller manufacturer: Siemens, controller model: SINUMERIK 840D SL, laser type: diode laser, laser source manufacturer: TRUMPF, laser hours: 14,600 h, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 25 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness brass (max.): 8 mm, sheet thickness copper (max.): 8 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, feed rate X-axis: 100 m/min, feed rate Y-axis: 100 m/min, feed rate Z-axis: 100 m/min, workpiece weight (max.): 900 kg, input current: 42 A, type of cooling: water, year of last overhaul: 2026, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Special equipment: + LiftMaster Compact 1530 (Type AL34) with loading cart + 3001 on TruDisk 4001 + BrightLine fiber + Nozzle changer + Wireless Operation Point + Performance package for fusion cutting + High-speed cutting package + High-speed eco cutting package + Copper cutting package + Brass cutting package + Transverse conveyor with tilting hopper + Storage interface + LiftMaster Compact 1530 (Type AL34 with loading cart) + Auxiliary pallet operation with loading cart + Safety fence Optional, at an extra cost: 1. Assembly, commissioning, partial overhaul and training of up to 3 operators at the customer's site, with a functional guarantee upon acceptance. 2. Workshop overhaul of the machine with commissioning and acceptance according to manufacturer's specifications in our workshop. Assembly, commissioning of the machine, and training of up to 3 operators at the customer's site. Standard equipment: - Closed machine frame - Automatic pallet changer in the longitudinal direction - Torque drive in combination with linear direct drives - Closed beam guidance via fiber optic cable - Machine cooling unit (water-air) - Integrated control cabinets with internal lighting - Longitudinal conveyor - Work area lighting - Positioning laser diode - Spraying device - PierceLine - FocusLine - NitroLine - PlasmaLine - Automatic nozzle cleaning - Transport and assembly device TRUMPF Laser Bwjdpfx Aj Ahhu Usiwjw - Solid-state laser TruDisk with 1 fiber optic output - Laser cooling unit (water-air) - Excitation via pump diodes - Laser power control Cutting unit - Universal cutting unit - Single cutting head strategy - Protective glass against lens contamination - ControlLine: Height control and sheet edge detection Control system - Workshop programming (TruTops via network access) - Quick reproduction - Touch color screen - Integrated technology data - Automatic shutdown - Programmable cutting gas/pressure selection - ContourLine - Microweld - FastLine - FlyLine - AdjustLine - Teleservice via internet Data transfer - USB interface - RJ-45 network connection Safety - CE marking - Light barriers - Multi-chamber extraction system - Compact dust collector - Machine enclosure with certified viewing window (right door) - Roof cover

Condition: ready for operation (used), functionality: fully functional, A very nice Ideal type 5251-90 is for sale. It features a digital display and automatic pressing, operating on 220 volts. It comes complete with an extra blade. You are welcome to test this machine at our location. Bwodpo Ahh T Eofx Aiwjw We can arrange transportation and packaging for you and load it into a truck or container. Please inquire about a price including transportation (within the Netherlands). Best regards, Henk Hoos.

Condition: used, Consisting of: “GEA-CFS” battering machine Type ER 900 all stainless steel belt width 900 mm mobile mesh width 5 mm adjustable speed with air knives with batter pump outside dimensions (l x w x h) : ± 1.700 x 1.500 x 1.700 mm + “GEA-CFS” breading line Type PR 900 2,83 kW suitable for standard belt width 900 mm mobile adjustable speed adjustable working height with air knive Bodj Ahg Txjpfx Aiweww outside dimensions (l x w x h) : ± 2.800 x 1.200 x 2.100 mm

Condition: good (used), Year of construction: 2011, functionality: fully functional, Technical details x-travel 500 mm y-travel 450 mm z-travel 400 mm Control Heidenhain iTNC 530 tool taper HSK 63 total power requirement 34 kVA weight of the machine ca. 4810 kg Accessories oil-mist-extractor Additional information Operating hours: 89.800 Spindle hours: 43.800 Machine with new milling spindle, replaced 2026. CNC control: Heidenhain iTNC 530 Bjds Ahn Hyjpfx Aiwsww Equipment and accessories: Pallet changer (Automation PH 150/8) 60-position tool changer Electronic handwheel HR 410 Touch probe (TS) Chip conveyor Internal coolant supply system Oil-mist-extractor Machine without tool taper and clamping devices.

Condition: used, boneless meat, sausage, cheese, or fish 400V, 50 Hz/3/N/PE 32A approx. 10 kW compressed air connection values: min. pressure 4 bar cutting system sickle blade: max. speed at blade head WSK 2,000 min-1 Drive: feed, cup, portioning unit CCU: servo motors Drive power transmission: toothed belts Feed power transmission: precision ball screw drive Cutting thickness: 0.1 to 100 mm (depending on product and cutting capacity) product passage width: adjustable up to max. 380 mm product passage height: adjustable from 125 to max. 180 mm (optionally up to 200 mm) programming: dialogue via touch screen program memory locations: 100 2 sickle blades total dimensions (L x W x H): ± 3,000 x 1,600 x 2,700 mm + "Wibotec" single-pan weighing scale Type Continuous checkweigher 200 - Web 99T 355 -365 Web Module Length: approx. 485 mm Width: approx. 535 mm Weight: approx. 150 kg Power transmission of the drives: gears 9 g - 3750 g + Monosorting rocker Type CCR Length: approx. 450 mm Width: approx. 380 mm Bwedpfx Aie Ahn Ukswsw Weight: 250 kg Drive power transmission: toothed belts Motor type: asynchronous motors or servo drives, depending on the slicer type + Conveyor belt Type CCE total dimensions (L x W x H): ± 4,100 x 960 x 1,500 mm drive power transmission: toothed belts motor type: asynchronous motors or servo drives

Condition: used, Year of construction: 1970, taper MK 4 feeds: ja Bwsdpfx Aisxzu Dqowsw weight of the machine ca. 1,5 t

Condition: used, Year of construction: 2000, overall weight: 12,000 kg, Used machining center from AXA Type VSC-1-4000-M/E ISO 40 tool holder X / Y / Z = 4000 / 550 / 600 Heidenhain TNC 430M CNC control 22-position tool changer Bodpfx As Ahnq Seiwjww Tools not included.

Condition: used, Year of construction: 2002, travel distance X-axis: 400 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, spindle speed (max.): 20,000 rpm, number of slots in tool magazine: 30, Machining Center - Universal Manufacturer: MIKRON Type: UCP 600 Year of manufacture: 2002 Control system: Heidenhain iTNC 530 Technical specifications: X-axis: 400 mm Bedpfo Ahrm Ssx Aiwjww Y-axis: 450 mm Z-axis: 450 mm C-axis: 360° C-axis rotational speed: 30 rpm A-axis: +107° / -10.5° Spindle speed: 20,000 rpm Number of tool stations: 30 Condition: Used Technical features & accessories: - Oil/air lubrication system - Water cooler Accessories, tools, and clamping devices shown are included in the scope of delivery only if explicitly stated in the additional information. Subject to modifications and errors in the technical data and information; prior sale reserved!

Condition: used, CNC Vertical Machining Center FEHLMANN Type PICOMAX 60 CNC Control System: HEIDENHAIN TNC 426 Serial No.: 14599641 Year of manufacture: 1999 Travel paths X: 500 mm, Y: 350 mm, Z: 610 mm Feed rate: 1 - 20,000 mm/min Rapid traverse: 20 m/min Feed force: 12,000 N Table clamping surface: 920 x 380 mm T-slots: 7 pcs, 12-H8 mm Table load capacity: max. 250 kg Table height: 1004 mm Distance spindle nose - table: 94 - 704 mm Overhang spindle - column: 405 mm Spindle speed: 50 - 18,000 rpm, stepless Spindle drive: 10.2 kW (60% duty cycle) Max. torque: 70 Nm (up to 1240 rpm) Spindle taper: SK 30 / DIN 69871A Pull stud: DIN 69872 Drilling capacity in steel: 25 mm Milling capacity in steel / aluminium: 100 / 700 cm³/min Thread cutting in steel / aluminium: M20 / M24 Tool changer: 24 positions Tool change time: approx. 6 sec. Chip-to-chip time: approx. 8 sec. Control: Heidenhain TNC 426 Power supply: 400 Volt, 50 Hz Connected load: 20 kW - Electronic handwheel Heidenhain HR410 - 3D probe Renishaw MP12 - Tool measurement system - TFT display - Direct path measuring system - Coolant system (200 liters, lateral) Bedpfsy N Du Dex Aiwoww - Spindle cooling unit (lateral) - Central lubrication Vogel - Air supply: 6 bar, 40 - 200 l/min - Oil mist extraction - Operating hours: - Control on: 97,000 h - Machine on: 80,000 h - Program run: 42,000 h Required space (L x W x H): 2,000 x 1,700 x 3,000 mm Weight: approx. 3.2 t Good condition

Condition: good (used), Year of construction: 2008, Ref. -No.: 10649 Manufacturer: JUARISTI Type: TX1D Bwodo Ahw N Sspfx Aiwew Year of construction: 2008 Type of control: CNC Control: Heidenhain TNC 530 Storage location: Halberstadt Country of origin: Spain X-Travel: 4000 mm Y-Travel: 2500 mm Z-Travel: 2000 mm B-Axis: 360 ° C-Axis: 0,005 ° Rotary Table (Lxw): 1600 x 3000 mm Table Load: 4000 kg Tool Taper: SK50 Numbers Of Tools In Magazin: 100 Spindle Speed: 3500 RPM Drive Capacity - Spindle Motor: 25 kW Further information: - Weight limit for milling ⁓ 4000 kg - X-axis with rotary table and swivel head - 3 indexing tables, approx. 200 - Internal coolant supply (IKZ) is standard - Welding stand capable of welding and powder coating up to 6.3 t and 10 m in length with a 2 x 2.5 m cross-section The machine can be viewed while powered on by prior arrangement.

Condition: good (used), Year of construction: 2008, Table size 1600 x 750 mm, table load 1500 kgs, Traverses XYZ 1525 x 762 x 625 mm, rapid feedrates 24m/min, Bwodpfx Aisxwytcowsw Spindle power 18.5 Kw, spindle speed 6,000rpm, 40 station ATC, spindle taper BT50, 4th axis unit through spindle coolant, swarf conveyor, Fanuc 21i control.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 1112519, MACHINE SPECIFICATION Table size 914mm x 356mm X axis traverse 762mm Y axis traverse 406mm Z axis traverse 508mm Spindle nose to table 102 -610mm Spindle BT 40 Spindle speeds 0-12000rpm Spindle motor 22.44kW Rapid feed rate 35.6m/min Toolchanger capacity 24 + 1 tools Approximate weight 3800Kg MACHINE EQUIPPED WITH: - Haas CNC control Bwjdpfo Ahw Rzjx Aiwew Wireless intuitive probing system Swarf auger Coolant system Lighting Guarding

Condition: good (used), Year of construction: 2013, Ref. -No.: 10718 Manufacturer: REIDEN Type: RX 10 Year of construction: 2013 Type of control: CNC Control: Siemens Sinumerik 840 D Storage location: Halberstadt Country of origin: Schweiz Machine-No.: 40-xxx Turning Speeds: 16.000 RPM X stroke: 1.000 mm Y stroke: 1.100 mm Bwodpfxo Ahw Sis Aiwjw Z - stroke: 810 mm C-Axis: 360° Spindle power: 38 kW Tool Taper: HSK 63 Max. Rapid traverse: 60 m / min Further information: The machine is offered including all available accessories and technical documentation. The machine has been cleaned, is fully operational and can be inspected under power by prior appointment.

Condition: excellent (used), Year of construction: 2007, operating hours: 9,454 h, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, Equipment: documentation/manual, DMG DMU50 - 2007 Well-maintained 3+2 axis CNC machine. FIRST original owner of this machine. Machine is still fully operational, it has seen very little use over the past years. A live demonstration of the machine running is available upon request. Technical Specifications:  Control system: Heidenhain iTNC 530  Axis configuration: 3+2 axis (automatic table, no handwheels) Bwsde Ahxi Depfx Aiwsw  Travel (X / Y / Z): 500 mm / 450 mm / 400 mm  B-axis: -15° to +110°  C-axis: 360° Included Equipment & Accessories: This is a very complete package. The sale includes:  Tool holders: ±100 tool holders included (please note: milling tools and collets are excluded)  Workpiece touch probe heidenhain.  Spindle speeder: Madaula spindle speeder (compatible with the tool changer)  Workholding: 2 Schunk clamping vices + 1 height block + several extras.

Condition: refurbished (used), Year of construction: 2021, operating hours: 850 h, functionality: fully functional, Honing: R 220 euro R 220 EC R 420 EC R 620 R 360 So DL Bwodpfewfdbcox Aiwjw R185 EC-KF Rcc4 Set Blasting: RT 250 euro RSKI 1000 RSKI700-3d-atex AM: C1 M1 M1 Basic S1 In addition to the machines mentioned and shown, we have many other machines and accessories (blasting systems, conveyor belts and small machines) available in stock. The machines can be purchased or rented. Contact us for (free) advice on honing, drum and blasting technology.

Condition: used, total height: 1,900 mm, total width: 1,800 mm, total length: 2,100 mm, Colour: Green Empty weight: 2.000 kg Bodpfxs Ahy Afj Aiwsww - Drive system: Conventional - Horizontal/vertical: Horizontal and vertical - Power [kW]: 6.0 - Number of axes [pcs]: 3 - X-axis travel [mm]: 850 - Y-axis travel [mm]: 290 - Z-axis travel [mm]: 450 - B-axis rotation [°]: 360 - C-axis rotation [°]: 360 - Table length [mm]: 1250 - Table width [mm]: 280 - Tool holder: ISO40 - Min. spindle speed [rpm]: 35 - Max. spindle speed [rpm]: 1800 - Options: Chip collection tray, Digital readout, Drill milling machine - └ Type of digital readout: Mitutoyo - Transport dimensions: 2100mm x 1800mm x 1900mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1991, bore capacity in steel (diameter) 35 mm throat 300 mm bore stroke 180 mm turning speeds 45-1750 U/min Bwsdo Ahzidopfx Aiwow 615 x 470 mm total power requirement 2,2 kW weight of the machine ca. 0,5 t dimensions of the machine ca. 1,2 x 0,8 x2,15 m Equipment: - Robust pillar drilling machine - Infinitely variable speed adjustment (V-belt) - Thread-cutting device - Automatic spindle feed - With electromagnetic engagement - Multi-speed (pole-changing) motor - Clockwise/counter-clockwise spindle rotation - Drilling depth stop - Machine table with 2 T-slots - Height-adjustable via hand crank - Coolant system - Machine vise - Emergency stop

Condition: used, Year of construction: 2017, Equipment: chip conveyor, Universal Machining Center Manufacturer: DMG MORI Model: CMX 50 U Year of manufacture: 2017 Control system: DMG MORI SLIMline Technical details: X-travel: 500 mm Y-travel: 450 mm Z-travel: 400 mm B-axis: -5 / +110° C-axis: 360° Table dimensions: 630 x 500 mm Rapid traverse: 30 m/min Spindle speed range: 20 – 12,000 rpm Drive power (40/100%): 13/9 kW Tool holder: SK 40 Number of tool stations: 30 positions Operating hours: approx. 11,605 h Spindle hours: approx. 4,061 h Bodpfx Ae Agpdnjiweww Technical features & accessories: - Chip conveyor - Internal Coolant Supply (ICS) - Coolant spray gun - Electronic handwheel - Direct measuring system (X, Y, Z axes) - Renishaw probe kit - Oil and emulsion mist separator Additional information: In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools shown, and workholding devices are included in the scope of delivery only if noted in the additional information. Subject to technical changes, errors, and prior sale.

Condition: new, functionality: fully functional, Year of construction: 2026, operating hours: 2 h, load capacity: 1,800 kg, lifting height: 4,800 mm, free lift: 1,515 mm, load center: 600 mm, fuel type: electric, mast type: triplex, battery capacity: 150 Ah, remaining battery capacity: 100 %, battery voltage: 80 V, DGUV certified until: 11/2027, fork length: 1,200 mm, tire condition: 100 %, total height: 2,200 mm, Equipment: 3rd hydraulic function, 4th hydraulic function, CE marking, UVV, full service history, hydraulic fork positioner, lighting, sideshift, Noblelift CPD18-A Electric Forklift - NEW - with the following specifications: · Lifting capacity: 1,800 kg at a load center of 600 mm · Lifting height: 4,800 mm · Overall height: 2,200 mm · Year of manufacture: 2026 (new) · Operating hours: 2 Noblelift electric forklift, lithium-ion battery, non-marking tires, triplex mast with side shifter and fork positioner, load guard, lighting, single-pedal operation, four-link mechanical system, fork length 1,200 mm, integrated charger Price ex works, including valid FEM (UVV) inspection upon sale Bwjds Ahzqtspfx Aiwjw Inspection, demonstration, and test drive are available by appointment. Warranty: 84 months or 10,000 operating hours manufacturer's warranty on the lithium-ion battery 12 months or 1,000 operating hours manufacturer's warranty on the machine (whichever comes first) Sale is exclusively to commercial businesses; subject to prior sale, errors and omissions excepted. We can deliver your new forklift cost-effectively using our own ramp-type low-bed trailer (transport costs upon request). Further information and offers can be found on our redesigned website!

Condition: excellent (used), mileage: 764,333 km, power: 303 kW (411.96 HP), first registration: 09/2017, fuel type: diesel, tire size: 385/65 R22.5, axle configuration: 6x2, wheelbase: 6,200 mm, fuel: diesel, color: other, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 12,000 kg, permissible axle load (axle 3): 7,400 kg, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, fog lights, tail-lift, = Additional Options and Accessories = - Aluminum fuel tank - Air suspension - Radio/CD player - Side mirrors with electric adjustment - Sun visor - Digital speedometer Bedpfx Aijzv Tyyoweww - Power take-off (PTO) = Additional Information = General Information Year of construction: 2017 Cab: single Technical Information Number of cylinders: 6 Engine displacement: 12,902 cc Axle Configuration Brakes: Disc brakes Front axle: Tire size: 385/65 R22.5; Max. axle load: 9000 kg; Tire tread depth left: 20%; Tire tread depth right: 20%; Suspension: Leaf spring suspension Rear axle 1: Tire size: 295/80 R22.5; Max. axle load: 12000 kg; Tire tread depth left: 50%; Tire tread depth right: 50%; Suspension: Air suspension Rear axle 2: Tire size: 295/80 R22.5; Lift axle; Max. axle load: 7400 kg; Steerable; Tire tread depth left: 20%; Tire tread depth right: 20%; Suspension: Air suspension Weights Unladen weight: 13,160 kg Payload: 12,840 kg GVWR: 26,000 kg Functional Tail lift: Dhollandia Condition Technical condition: very good Optical condition: very good Damage: none