Used Tool Setter for sale (37,102)

Condition: like new (used), Year of construction: 2008, amount 1 STK Hfodpfxsuaygmo Apnsg

Condition: like new (used), Year of construction: 2008, amount 1 STK Hjdpexgvzhjfx Apnofg

Condition: like new (used), Year of construction: 2008, amount 1 STK Hfedpfjuayf Ajx Apnsg

Condition: like new (used), Year of construction: 2008, amount 1 STK Hfodpfjxgvy Rex Apnjg

Condition: like new (used), Year of construction: 2008, amount 1 STK Hsdexgvy Djpfx Apnefg

Condition: like new (used), Year of construction: 2008, amount 1 STK Hsdpfx Apeuaydljnjfg

Condition: good (used), functionality: fully functional, Used WILA OZU-318 tools V100mm OZU-318 100x80° R=20 Hfodpfeyzh Sdjx Apnog H=100 1x 515mm 2x 200mm Total length L=915mm Fixed price € 1,650,- FCA Drachten, NL No response to offers or requests for lowest price.

Condition: used, A large selection of SK40 tool holders, including mounted milling cutters, drills, and threading tools from workshop/industrial inventory, is available for sale. Mainly available: * SK40 shrink-fit holders * SK40 collet chucks / ER holders * SK40 tapping chucks * SK40 screw-in holders / Weldon holders * Various special adapters and milling heads Hfodpfxjy Rmfhe Apnjg Some holders are already equipped with: * Solid carbide end mills * Thread milling cutters * Thread taps * Drills * Face mills Various manufacturers, diameters, and designs available. Condition ranges from very good to used. ❗ Prices vary depending on the holder, tool, manufacturer, and condition. Therefore, please provide specific inquiries including: * Desired holder * Diameter / type * Ideally with a marked image or screenshot 📍 On-site inspection is expressly preferred to avoid any mix-ups and to allow direct inspection of the tools.

Condition: good (used), Year of construction: 1982, functionality: fully functional, Tool milling machine with 3D control, manual handwheels, and a universal table adjustable in three axes. Control: Deckel Dialog Control 4: 3D contouring control, including drilling and milling cycles Monitor, electronic handheld control panel Terminal for program input and output Technical specifications: Travel range X/Y/Z 300 x 220 x 400 mm Speed 31.5 - 3,150 rpm with 21 gear stages Hfjdpfx Aowid Spepneg Feed rate 4-2,000 mm/min Rapid traverse 4 m/min Drive power 1.6-2.0 kW SK 40 tool holder Hydraulic tool clamping Universal milling table with digital display: Clamping area 600 mm x 320 mm Table load 180 kg C-axis rotation range 360° A-axis tilt range 15°/45° B-axis swivel range +/- 45° Vertical milling head: Manual quill stroke - horizontally 65 mm, vertically 60 mm Additional equipment: Manual machine handwheels with scale Direct travel measurement of the NC axes Cooling water system Special accessories: Approx. 33 tool holders (without tools) - see photo High-speed milling spindle Machine data: Machine weight approx. 1,380 kg Space requirement including accessories L approx. 2,940 mm, W approx. 1,900 mm, H approx. 1,960 mm Power supply: 380 V, 50 Hz, 12 kVA The machine is in good, fully functional condition. It can be inspected with power and chippings by appointment.

Condition: excellent (used), Year of construction: 1979, functionality: fully functional, Universal Milling Machine Deckel FP2 with 3-Axis Active – TNC 111 Digital Readout by Heidenhain, incl. Accessories, Excellent Condition Technical Data: >> Year of manufacture: 1979, Machine No. 2202-10512 >> Fixed angle table >> Spindle speeds: 25 – 2500 rpm >> Infinitely variable feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 2.2 kW >> Spindle brake >> Travel X/Y/Z: 400/220/400 mm >> Vertical milling head adjustable 150 mm on spindle carrier >> Vertical and horizontal quill – SK40 extendable >> Drawbar system M16 >> Weight approx. 1400 kg Hfsdpfx Ajy H Ibcepnsg Equipment and Accessories: >> 3-axis TNC 111 Active digital readout by Heidenhain >> Coolant system >> Central lubrication >> 1 accessory cabinet containing: Collets, tool holders, clamping tools, tailstock, Dividing head with 3-jaw chuck, vise, tailstock, indexing plates, and much more About the Machine: For sale is a Deckel FP2 universal milling machine in excellent condition. The FP2 comes from a state-operated laboratory where it saw only minimal use. It includes an accessory cabinet with a wide range of tools. The machine has very little backlash, and all spindles move smoothly. The geometry is outstanding. Even at maximum spindle speeds, the milling machine runs quietly. On this newer FP2 model, the feed on all three axes is continuously adjustable and each axis has rapid traverse. A major advantage is the active 3-axis digital readout. With the Heidenhain digital control, set dimensions can be entered and the machine will automatically travel to these positions. An oil change has been carried out. The machine has been mechanically and electrically checked. The Heidenhain digital display makes operation easier and even more precise. Take advantage of the opportunity to view and test the machine under power on site.

Condition: good (used), Year of construction: 1997, x-travel 600 mm y-travel 450 mm z-travel 400 mm Control Heidenhain 430 ITNC tool taper SK 40 voltage 400 V Hjdpfx Apjwbi A Dsnsfg control voltage 24 V weight of the machine ca. 6 t - Operating hours: 48,690 - Spindle hours: 13,465 - Max. table load: 1,000 kg - Machine weight: 6,000 kg - Includes tool holders – SK40 - Includes all descriptions - Includes programming manual – Heidenhain - Includes 1 machine vice - Includes clamping claws

Condition: excellent (used), Grooving tool, special tool, grooving tool, grooving machine, grooving machine, grooving tool Hjdpfx Apob A I Ufjnofg -Special tool for grooving blind holes -Guided tour -grooving tool -Weight: 80 kg

Condition: used, width / mm depth / mm height / mm weight / kg Turning & Milling Tool Set – approx. 85 pcs – SK40 – incl. Tool Cabinet For sale is a large set of high-quality turning and milling tools from well-known brands. Details: approx. 85 tools SK40 holders includes driven tools various tool holders, drills, milling cutters, etc. incl. solid blue tool cabinet Hfedpjy Dibljfx Apneg Condition: Used, in good condition with normal signs of wear. Fully functional and ready to use. Scope of delivery: Everything as shown in the pictures. Ideal for CNC / metalworking / workshop use.

Condition: used, Year of construction: 1986, measuring range X-axis 500 mm measuring range Y-axis . mm Table dimensions . mm tool diameter . mm Hfodpsy Ay Nwefx Apnsg

Condition: used, Year of construction: 1999, x-travel 620 mm y-travel 420 mm z-travel 400 mm Control Heidenhain TNC 124 swivellable manuell +/-45 ° max. tool diameter 125 mm Hsdpfx Apsy Ay Nqjnsfg max. tool weight 6 kg table surface area 400 x 800 mm T-slots 5x14x80 max. table load 400 kg feed speeds X/Y: 0 - 6.000 mm/min feed speeds Z: 0 - 4.000 mm/min rapid traverse X/Y: 6 m/min rapid traverse Z: 4 m/min total power requirement 11 kW weight of the machine ca. 2 t dimensions of the machine ca. 2,9 x 3,5 x 2,0 m

Condition: excellent (used), Tool holder steep taper 45 (SK45) to MK2 (for milling arbors, shank milling cutters, for milling machines). Manufacturer: Bahmüller, Type W640/1 – Wilhelm Bahmüller Maschinenbau Präzisionswerkzeuge GmbH Very good condition Without drawbolt (thread M16), with integrated ejector screw for clamped tool. Hedpfjymx Edjx Apnsfg Milling tool holder – tool taper for clamping Price €55,-- net ex location plus packaging costs All technical data subject to errors and omissions. We sell exclusively to countries within the European Community.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, operating hours: 300 h, power: 30 kW (40.79 HP), type of input current: three-phase, workpiece length (max.): 3,000 mm, workpiece width (max.): 2,100 mm, number of axes: 3, number of slots in tool magazine: 12, actuation type: pneumatic, overall weight: 2,500 kg, Technical Data Sheet: Detailed Configuration - Working area: 2100 x 3000 x 250 mm (effective working surface). - Spindle: HQD 9.0 kW ATC, air-cooled, 18,000 rpm, ISO30 tool holder. - Drilling unit: HQD block with 9 vertical drills. - Inverter: Fuling 11.0 kW. - Control system: Taiwan SYNTEC 6MB controller (widely used for ATC) with remote handwheel. - Motors & drivers: YASKAWA 850W servomotors and 1000W drivers for X and Y axes. The Z axis features a braking function. - Tool magazine: 12-position carousel design, automatic tool change in 8 seconds. - Table: Vacuum working table. - Linear guides: Taiwan PMI No. 25 guides (high precision, smooth transmission, long service life). - X, Y transmission: Helical rack, 1.5M, high load capacity. - Gear reducers: Japanese Shimpo reducers for X, Y, and Z axes (higher speed). - Z transmission: Taiwan TBI ball screw (high precision). - Tool sensor: Automatic tool sensor calibration for setting the Z-zero point. - Lubrication system: Automatic lubrication system, 1.5L (programmable for time and volume). - Limit switches: OMRON (Japan) sensors for X, Y, Z axes. - Electrical components: Schneider Electric components (France). - Electrical wiring: Flexible shielded cables with copper wires (static protection), Igus brand (Germany). - Machine frame: Robust, thick welded steel tube base frame. - Vacuum pump: 7.5 kW air-cooled vacuum pump set (high suction power). Hodpfey Iy Anex Apnofg - Dust collector: 4 kW double-bag extractor. - Loading platform: Complete automatic loading and unloading kit for 2130 format. - Air compressor: 2 x 7.5 kW with air dryer, filter, oil-water separator, and tank. - Pop-up pins: Retractable stops (for quick and repeatable positioning).

Condition: new, functionality: fully functional, Warehouse clearance of industrial accessories Specialized in spare parts for machine tools, CNC machining centers Siemens 8m, 850, 840C, 840D, Siemens NC motors Rexroth hydraulics and linear motion technology Festo pneumatics, Herion pneumatics Parker hydraulics Brinkmann pumps, pumps from various manufacturers Heidenhain measurement systems, ROD and linear measurement systems Coax coolant valves and sensors Balluff switches and sensors Hodoy Ibgzspfx Apnsfg Phoenix Contact Römheld clamping devices Gerwah couplings HSK100, HSK63 tool holders Renishaw ABB Round sealing rings, Turcon Glyde seals Wickmann + Siemens fuses Euchner switches, Honeywell limit switches And much more... (not everything is shown in the pictures) Workbenches, drawer cabinets, heavy-duty shelving Final sale price with moderate asking: €950,000 Collection only

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, tool type: HSK 100, We are offering a comprehensive lot of approximately 200 HSK-100 tool holders in various versions for sale. Hodpfx Apoy Hfnmjnjfg These tool holders come from productive use on a WFL Millturn M 100 and were utilized there for a range of turning, drilling, and milling operations. The inventory includes tool holders from different years of manufacture, approximately from 2006 to 2020. The scope of supply includes tool holders and systems from renowned manufacturers such as BENZ, Gühring, Wohlhaupter, and other established brands. Included are various types, such as milling holders, drilling and boring tools, special holders, adapters, and other HSK-100 tooling devices. The attached photos show the tool holders both in their previous mounted use on the machine or at the operator station, as well as in their current stored condition in our warehouse. This lot is especially suitable for operators of WFL Millturn machines or other comparable machining centers equipped with HSK-100 interfaces. An inspection can be arranged by appointment. Additional detailed photos of individual tool holders, manufacturer markings, or nameplates can be provided upon serious inquiry.

Condition: used, Universal facing and boring head WOHLHAUPTER type UPA 3 Spindle tool, spindle head (suitable for DECKEL) Manuf. No. 40769 Tool holder: MK 4 - S20x2 Tool holder: SK 40 - S20x2 Shaft tool holder: Ø 18 mm Adjustment accuracy: 0.01 mm - with adapter sleeve MK4 to SK40 - Accessories as shown - Storage case Hfjdjy Ehyijpfx Apnjg Net weight (spindle head only): 2.8 kg Weight with storage case: 6 kg good condition

Condition: good (used), Year of construction: 1988, DECKEL S11 tool grinding machine - good condition - Scope of offer according to photos - EXW CH-4528 Zuchwil Technical data Clamping surface of the tool slide: 500 x 180mm Hjdjr Elwkspfx Apnofg Max. Tool diameter between the tips: 130mm Max. Tool diameter with flying clamping in the universal dividing head: 620mm Max. Tool lengths between centers: 270mm T-slot machine stand: 12mm T-slot grinding head, tool slide and accessories: 8mm Sanding stroke: 190mm Sanding stroke for twist sanding: 190mm Cross adjustment of tool slide: 100mm Vertical adjustment of sanding head: 325mm Longitudinal adjustment of grinding spindle: 5mm Tool carrier: 220mm Grinding head support: 800mm Universal dividing head on tool slide: 330mm Sanding head support: 360 degrees Sanding head: 360 degrees Tool carrier: 360 degrees Three-phase drive motor: 1.1KW at 2800 rpm Spindle speeds: Infinitely variable 2000 to 12000 rpm Max. Grinding wheel diameter: 125mm Max. Cutting wheel diameter: 200mm Weight: approx. 800 kg Dimensions: 800 x 1100 x 1760mm Space requirement: 2.5 x 2.3 m No responsibility is taken for the correctness, completeness and up-to-dateness of the information.

Condition: good (used), Year of construction: 1997, Rollomatic CNC 600 X Tool Grinding Machine TECHNICAL DATA X-axis: 228 mm Y-axis: 177 mm Z-axis: 52 mm A-axis: -15 to 90° B-axis: -110 to 40° C-axis: 360° Resolution: 0.0001 mm Rapid traverse: 12 m/min Grinding spindle angle: 105° Power: 4.1 kW Hfsdpfjwf Nn Isx Apnjg Speed: 2000 – 7200 rpm Max. grinding wheel diameter: 150 mm Dimensions: 2060 x 2032 x 1880 mm Weight: 3500 kg SCOPE OF OFFER Among other things: (list not exhaustive): Rollomatic CNC tool grinding machine, year of manufacture: 1997 Rollomatic Pick and Place Robot Exact scope of supply as per photo gallery No liability is assumed for the accuracy, completeness, or timeliness of the information provided.

Year of construction: 2003, condition: excellent (used), Schneeberger DMR Gemini CNC tool grinding machine TECHNICAL DATA Control: GE Fanuc 160, 5 axes simultaneous Software: Schneeberger Quinto Measuring system X,Y and Z axis: 0.1 μm A-axis: 0.0001° C axis: 0.0001° Grinding head Power: 15 kW speed: 50 - 10`000 rpm spindle nose: HSK 50 Max. wheel diameter: 250 mm Max. Number of grinding wheels: 6 Linear axes X-axis, travel: 380 mm feed speed: 20`000 mm/min resolution: 0,0001 mm gear ratio: 1 : 1 Power: 1,0 kW / 3 Nm Y-axis, travel: 300 mm feed speed: 5`000 mm/min resolution: 0,0001 mm Gear ratio: 24 :4 Power: 1,6 kW / 8 Nm Z-axis, travel: 280 mm feed speed: 20`000 mm/min resolution: 0,0001 mm gear ratio: 1 : 1 Power: 1,0 kW / 3 Nm Rotary axes C-axis: 210 ° Speed: 72 ° / s Resolution: 0,0001 ° Power: 1.6 kW / 8 Nm C` axis: +- 180 ° Speed: 90 ° / s Resolution: 0,0001 ° Infeed: Hydraulic A axis: +- 360 ° Speed: 225 ° / s resolution: 0,0001° Power: 1,0 kW Nose: ISO 50 Center height: 210 mm Dimensions and weight Hfedpsmqni Ajfx Apnjg Length: 1700 mm Depth: 2270 mm Height: 2260 mm Weight: 8`000 kg We do not guarantee the accuracy, completeness and timeliness of the information.

Condition: ready for operation (used), tool grinding machine working perfectly Hodpfx Aoyw N D Tepnofg

Condition: good (used), Clamping devices, clamping jaws, deep clamping jaws, clamping supports, clamping tools, step clamps, low clamps, clamping irons, step blocks, clamping screws, T-slot screws, slotted screws, T-slot nuts -Clamping tool: Clamping screw set with storage box -Type: various designs, see photos -Thread: M20 -Price/Fee: complete -Box dimensions: 380/315/H60 mm Total weight: 11.7 kg Hodpfxsu Npgws Apnjfg