Used Toolroom Mill for sale (9,683)

Condition: excellent (used), Year of construction: 2019, operating hours: 403 h, functionality: fully functional, turning length: 1,200 mm, spindle bore: 120 mm, controller model: Siemens 840 Dsl, Equipment: documentation/manual, Technical data: Turning length 1200 mm Chuck diameter 350 mm Working stroke X top/bottom 200 mm Working stroke Y. axis 210 mm (+130/-80) Working stroke Z. axis 1200 mm Maximum travel speed W/X/Y/Z meters/minute 45/40/40/46 Ball screw diameter W/X/Y/Z mm 40/40/40/40 Profile rail guide, B/X/Y/Z mm 45/45/45/55 Tool flight circle 700 mm Maximum center distance 1200 mm Main spindle/counter spindle Spindle bearing diameter 120 mm/160 mm Spindle passage 65/105 mm Spindle bore diameter 80/120 mm Gbodpevw Upcefx Adcsn Spindle flange/spindle head DIN 55026 A6 / A8 Drive power 100% ED 22 KW/67.4 Drive power, 40% ED 24 KW/80 Nominal speed 1400 rpm Maximum speed 5,700 rpm Torque 100% ED 150 nm/585 Torque 40% ED 191 nm/795 C-axis resolution 0.001 degrees Both turrets: Tool holder: VDI 40 Maximum speed rpm 6000 torque drive 12,000 speed drive Maximum drive power kW: 28.5 torque drive 23.5 speed drive Maximum torque (25% ED) Nm: 85 torque drive 56 speed drive Dimensions: 4500 x 2500 x 2500 Weight approx. 16000 kg Control: Siemens 840 Dsl

Condition: used, functionality: fully functional, Milling machine Deckel FP 4 M 3-axis digital readout Heidenhain Work area: 500 x 400 x 400 mm Drive power: 4 kW Fixed table 800 x 460 mm Chip tray Gbjdpfxoy Awz Ro Adcen Spindle taper SK 40 Speed range n 50-2500 rpm Feed rates 8-630 mm/min Rapid traverse 1.3 m/min Space requirement approx. 2 x 2 x 2 m Weight approx. 1650 kg

Condition: good (used), Year of construction: 2008, 1 used CNC turning/milling center Gildemeister Gbodpfx Adeq T I Izjcon type TWIN 65 RG 2 year 2008 with Siemens 840 D Maximum turning length (travel in the Z axis) 650 mm Maximum turning diameter over bed 250 mm Maximum length of travel in the X-axis 300 mm Maximum feed speed X-axis 30 m/min Maximum feed speed Z axis 30 m/min Maximum main spindle power 35 kW Spindle diameter 65 mm Minimum main spindle speed 20 1/min Maximum main spindle speed 5000 1/min Lathe length 7000 mm Lathe width 4700 mm Lathe height 2500 mm Lathe weight 10 t Machine equipment Y axis Irco loading magazine ILS RBK 1200 mm Workpiece pick-up device Technical data Errors excepted Please note that the machine is sold without chucks, as these remain with the seller!

Year of construction: 1999, condition: good (used), used moving column bed milling machine > make Kekeisen > type 1200/8 > year99 Godpfsm Twc Tox Adcsbn > With Heidenhain TNC 426 > > Spindle mounting SK40 > With 30-fold tool changer > Speed 20-7300 rpm > Rapid traverse 0-30 m/min > travels > X 1200 mm > Y 500 mm > Z 800 mm > Milling head automatically swivels in vertical > and horizontal position > Drive power 28 kw > Weight 12 to

Condition: used, 1 used engraving cutter grinder Manufacturer: Deckel Model: SOE with optics Year of manufacture: 1988 Gbsdpsyl Iipofx Adcjn Technical specifications: Motor speed: 2800 rpm Grinding spindle speed: 4500 rpm Drive power: 0.55 kW / 380 Volt Weight approx. 200 kg Accessories and equipment: Collets Optical system Machine base / pedestal Tools

Condition: good (used), Year of construction: 2008, 1 used Doosan turning and milling center type Puma Mx 2000 T year 2008 with Fanuc 16 i-TB control Max. turning diameter 540 mm Max. turning length 1,020 mm Milling spindle Drive power: 18.5 kW Max. spindle speed: 10000 rpm B-axis: 240° Tool magazine / ATC Gsdsqqivvspfx Adcebn Tool places: 80 Main spindle Drive power: 15 kW max. spindle speed 5,000 rpm max. bar capacity 65 mm Lower turret with 12 driven tool positions max. spindle speed: 4,000 rpm Chip conveyor and coolant system Weight 12 tons Height of the machine 2600 mm Technical data Errors excepted

Condition: good (used), Year of construction: 1995, 1 used universal tool and cutter grinding machine Manufacturer: Deckel Maho Type: FP 1 Year of manufacture: 1995, with CE certification Equipped with Heidenhain TNC 123 digital display Technical data: Gbedpfxozamw Io Adcen X-axis travel: 300 mm Y-axis travel: 160 mm Z-axis travel: 340 mm Spindle mounting: SK 40 Table size: 600x210 mm Spindle speeds: 40-2000 rpm Machine weight: approx. 1 t Space required: approx. 1.6x1.3x1.8 m

Condition: good (used), Year of construction: 2023, CNC multi-axis turning center Manufacturer: Hyundai WIA Type: LM1800TTSY Control: Siemens 840D Shopturn with 3D simulation Year of construction: 2023 Gbjdpfxsy Hfrls Adcen Technical data: Incline bed design with box guide in X/Y axis, Z-axis with linear guide Counter spindle and twin turret system Travel distances: X/X1: 165 / 195 mm Z1/Z2: 700 / 720 mm ZB: 668 mm Y: 100 mm Rapid traverse rates: X/Y/Z: 20 / 7.5 / 40 m/min Max. turning diameter: 230 mm Max. turning length: 673 mm Spindle nose: A2-6 Spindle bore / bar capacity: 76 / 65 mm Spindle speed: 5,000 rpm (both spindles) Drive power: 2x 22 / 11 kW Turret & milling unit: 2 turrets each with 12 stations (optional 24) System: BMT55P Milling drive: Speed: 5,000 rpm Power: 5.5 / 1.1 kW Equipment: Automatic measuring arm Coolant tank 270 liters Direct path measuring system (X1/X2, Z1/Z2, Y) Temperature compensation for coolant (with air conditioning unit) High-pressure cooling 20 bar Chip conveyor (belt conveyor) Siemens network extension Bar loader interface Extensions & accessories Software & electrical: ShopTurn with 3D simulation Machine transformer Measuring & automation technology: Automatic Q-Setter Renishaw Linear positioning sensor (for main and counter spindle) Workpiece handling: Part catcher for main spindle Part catcher for counter spindle with belt discharge Workpiece ejector Clamping technology: Spanntop mini from Hainbuch Main spindle (AX puller size 65) Counter spindle (AX fixed size 65) Peripherals: Bar loader magazine Sprint 565 S2 from LNS For bars up to 3,000 mm length Diameter: 5 – 65 mm Reduction sleeve set (various diameters) Extraction system Purchase price in 2023: 330,000 Euros The machine has been little used and is in very good condition.

Condition: good (used), 1 used universal tool milling machine make Deckel type FP 1 year 82 Technical data: x-travel: 300 mm Gbjdpfx Aorn I Rzedcsn y-travel: 160 mm z-travel: 340 mm Spindle holder SK 40 Table size: 600x210 mm Spindle speeds: 40-2000 rpm Machine weight approx.: 1 t Space requirement approx.: 1.6x1.3x1.8 m

Condition: used, Year of construction: 2011, functionality: fully functional, travel distance X-axis: 760 mm, travel distance Y-axis: 440 mm, travel distance Z-axis: 460 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, controller manufacturer: Fagor, controller model: 8055 iA/MC, total height: 2,500 mm, total length: 2,200 mm, total width: 2,100 mm, table width: 410 mm, table height: 820 mm, table length: 900 mm, table load: 350 kg, overall weight: 3,630 kg, spindle speed (max.): 8,000 rpm, coolant supply: 2.7 bar, number of slots in tool magazine: 16, tool length: 300 mm, tool diameter: 100 mm, tool weight: 8,000 g, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, Used machining center – Micromill MM 430 - Control system: Fagor - Spindle – 8000 rpm – mount DIN 69871 40 ISO - Semi-automatic with manual feed control - Automatic with cycle function - DIN ISO programming - 10.4" color display - Large memory for created programs - Motorized spiral chip conveyor system - Tool changer (carousel) for 16 tools - Linear roller guides in all 3 axes - Automatic central lubrication - Spindle orientation - Work table, precision-ground with 4 T-slots - Precision-ground ball screws in all 3 axes - Complete machine enclosure with 2 front sliding doors - Coolant system with chip flushing system - Telescopic guide rail cover for all 3 axes - Low-voltage system - Oil separator - Rigid tapping - Servo motors (direct drive) for feeds - Electronic handwheel for all 3 axes - Ethernet connection - Spindle blow-out function - Work area lighting The machine can be inspected under power at any time. Gbsdpfjzc Htusx Adcen

Condition: ready for operation (used), * Brand: Metso/Gfa * Type: M 175 * Feed opening : 1800 x 800 mm * Incl.: hydraulic coupling * Excl.: E-motor Godozaz S Topfx Adcsbn

Condition: used, GAMBIN 3M universal milling machine Longitudinal travel: 1000mm Transverse travel: 420mm Vertical travel: 710mm Spindle: SA40 Gbodpfezb I R Eex Adcon Table: 1520 x 385 Speeds: 25 to 2000 rpm Weight: 3800 kg

Year of construction: 1993, condition: used, Manufacturer: Hosokawa Bepex Model: PCS-10 (Pulvocron) Year : 1993 Type: Air classification mill / Microniser Nominal capacity: 10 kg/h Brabender screw feeder Product filtration and collection cyclone + pneumatic cleaning Explosion-proof safety valve Rotary air/product seal valve Mikropul 12-6-30 receiver filter: Product collection hopper with fine particle separation Internal dimensions: Ø 90 cm x 530 cm Gbodpfx Aszbynvsdcsn Lubrication unit with a pump Steam sterilisation Plan a new electrical installation (This request is subject to an additional quote) Full technical documentation + paper drawings Product outlet hopper capacity: 200 kg – 1,100 litres

Year of construction: 2019, condition: excellent (used), The Compact Series The new Wanner granulators in the C’s series (“C” stands for “compact,” “s” for “silent,” i.e., noise-optimized) offer practical solutions for virtually all challenges associated with the in-line recycling of sprues and rejected parts during the production process. Thanks to their modular design, the C’s series granulators can be easily adapted to specific applications or operational requirements. Depending on the method of sprue feeding, the discharge of regrind, or the specific injection molding machine being used, the Wanner C’s series offers optimal solutions tailored to your workflow through a wide range of standard components. Optimized cutting geometry and low rotor speeds ensure high-quality regrind with minimal dust content, while sound-insulated feed hoppers and a grinding chamber design optimized to minimize structure-borne noise and vibration contribute to low noise levels. The generously sized gearbox ensures a long service life for the granulators while also allowing for extremely compact dimensions. The grinding chamber can be opened quickly and easily—saving time and costs, for example, during cleaning for color or material changes. Advantages of the C’s Series Easy adaptation to specific applications via a modular system Compact design requires minimal floor space next to the injection molding machine Solid cast/steel housing mounted on swivel casters Robust motor/gearbox unit for long service life Significantly reduced noise levels thanks to a staggered-cut rotor and a grinding chamber design optimized for vibration control. Easy operation and cleaning of the mill save time and costs Improved intake of bulky sprues and regrind parts due to optimal rotor geometry Grinding chamber with hardened inserts for minimal wear when processing glass-fiber reinforced material High-quality, low-dust regrind achieved through optimized cutting geometry. The co-rotating disc in the side wall reduces friction, thereby minimizing heat buildup and material degradation. Blades easily resharpened without special fixtures Sound-insulated feed hoppers with safety guards Technical Data Manufacturer: Wanner Type: C17.26sv Grinding chamber opening: 170 x 260 mm² Rotor diameter: 170 mm Rotor blades: 12 Stator blades: 2 Throughput: 20–25 kg/h Screen perforation: 3–8 mm Voltage: 400 V / 50 Hz Collection bin volume: approx. 6 l Suitable for glass-fiber reinforced material (standard) Control system: Contactor control with overload protection switch Electrically redundant design with self-monitoring safety relay compliant with EN 12012 5 m power cable Weight: 155 kg Year of manufacture: 04/2019 Product video "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de Find more items—new and used—in our shop! Gsdpfx Aozc Nydsdcebn International shipping costs available upon request!

Condition: reconditioned (used), Year of construction: 2012, operating hours: 3,006 h, functionality: fully functional, CNC controller: MSX-711 (MAPPS IV) Capacity Turning length mm: 1.540 Max. turning diameter mm: ø ø610 (Turret 2 ø274) Swing over bed mm: ø ø660 Swing over cross-slide mm: ø660 (Turret 2 ø300) Gbedpfx Aswztq Eodcon Turn-mill spindle Full indexing specifications X-axis travel mm: 495 Y-axis travel mm: ±125 Z-axis travel mm: 1.560 B-axis degree: ±120° Speed ​​spindle rpm: 12.000 Drive power kW: 18,5/11 (10 min./cont) Tool magazine Magazine places: 76 Tool holder: Capto C6 Lower turret Number of tool slots St .: 10 Indexing time s: 0,19 Main spindle Speed ​​spindle rpm: 5.000 Drive power spindle kW: 22/18,5 (30 min./cont) Counter spindle Speed ​​spindle rpm: 5.000 Drive power spindle kW: 22/18,5 (30 min./cont) Equipment Spindle 2 with tailstock option Electronic Handwheel Interface High-pressure coolant system Chip conveyor Air blow for chuck and tool tip Auto tool presetter for upper and lower Bar feeder interface Hobbing function

Condition: excellent (used), Year of construction: 1993, Vertical spindle mount SK 30 Speed range 265 – 3000 rpm Drive power 1.5 / 2 hp Horizontal spindle mount SK 30 Speed range 50 – 1500 rpm Drive power 3 / 4.2 hp Table surface area 800 x 200 mm Longitudinal travel X-axis, automatic approx. 600 mm Transverse travel Y-axis, automatic approx. 200 mm Vertical travel Z-axis, automatic approx. 400 mm Distance between table and milling spindle 300 mm Gedpfezbikmsx Adcobn Feed rates, stepless 30 - 340 mm/min Rapid traverse yes Dimensions L x W x H approx. 1300 x 1250 x 1800 mm Weight 900 kg Accessories / Special features: • 3-axis digital display ELESTA • Vertical milling head, SK 30 with boring quill, swiveling left-right • Horizontal milling attachment, SK 30 • Feed in all 3 axes, steplessly adjustable via potentiometer on the control panel • Rapid traverse • Rotary table, swiveling left-right • Coolant system • 2-stage main motor • Central lubrication This very good GUALDONI machine comes from an educational institution and can be inspected and demonstrated under power at any time by prior appointment. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, As-new CNC Vertical Machining Center, Milling Machine Gsdew Ed U Nopfx Adcsbn VMC, BAZ, HSC Milling, Machining Center TAIKAN B540Z Serial No. 1171009 Year of manufacture: 2017 CNC path control: SIEMENS Sinumerik 828 D Basic Travel range for working area X: 488 mm, Y: 400 mm, Z: 230 mm X-axis travel for tool change position X: 540 mm Table size 520 x 400 mm Spindle taper ISO 25 Distance spindle nose - table 165 - 395 mm Max. spindle speed 36,000 rpm, infinitely variable Feed rate 0 to 10,000 mm/min Rapid traverse 15 m/min Table load capacity 200 kg Max. tool length 120 mm Max. tool diameter 80 mm Max. tool weight 0.8 kg Tool change time approx. 10 sec. Axis drives 0.8 kW each Spindle drive 3.5 kW at 100% duty cycle Electrical connection 400 Volt, 50 Hz, 7.5 kW CNC path control SIEMENS Sinumerik 828 D Basic - Software: NCU V04.05+SP06+HF01 - Interfaces: LAN, USB and CF-Card - Measuring system for tool setting: METROL tool sensor - Vertical milling spindle = high-frequency spindle with liquid cooling and external recooling unit - Tool changer with 13 tool stations - Electronic handwheel - Coolant system - Protective enclosure with sliding door - Central lubrication - incl. 10 tool holders ISO 25 with ER20 collet chuck and a set of collets Transport dimensions (L x W x H): 1800 x 1500 x 2300 mm Weight: 2,900 kg Excellent condition – as new Machine comes from a showroom with very few operating hours.

Condition: used, Year of construction: 1971, hobbing length 1750 mm milling width 260 mm max. module 10 mm table size incl. water gutter 460 x 2100 mm table clamping surface: 250 x 1850 mm cutter width - max. 100 mm feed of the milling slide, stepless 0 - 500 mm/min. rapid traverse feeds 3000 mm/min milling head -swivable +/- 30 ° Rotation speed range of milling head, in 9 steps 29 - 178 rpm Milling head swivable 2 sides helical gearcutting 30 ° weight of the machine ca. 4 t dimensions of the machine ca. 4 x 1,85 x 1,85 m Equipment/accessories - 7 vices - change wheels - Clamping devices Gjdpfxeylpzye Adcebn - Documentation

Condition: good (used), Year of construction: 1988, Panhans swivel spindle milling machine Gbsdpjzcc S Tjfx Adcen Type: 259 Spindle diameter: 30 mm Spindle can rotate both clockwise and counterclockwise Spindle can be swiveled up to 45 degrees 3-roller feed mechanism

Condition: new, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 1,500 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, position of the milling head: Universal-Diagonal-Fräskopf, spindle speed (max.): 6,000 rpm, table width: 1,100 mm, table load: 10,000 kg, table length: 3,100 mm, overall weight: 27,000 kg, torque: 1,178 Nm, spindle motor power: 53 W, Equipment: rotational speed infinitely variable, LAGUN BM 3 C bed milling machine with integrated rotary table – available for short-term delivery The LAGUN BM 3 C is a highly stable bed milling machine with an integrated rotary table for heavy and precision machining. Ideal for single-part production as well as series production with the highest requirements for rigidity, accuracy, and reliability – all without the need for complex foundation work. Your benefits at a glance: Gedpfxem Tv Iio Adcjbn ✔ Installation & commissioning in Germany included ✔ Service & spare parts directly from JMT ✔ Lease purchase / financing options available ✔ No special foundation required (standard industrial floor is sufficient) ✔ 24-month warranty Why LAGUN: LAGUN is one of the leading machine tool manufacturers in Spain (MAHER HOLDING) and stands for robust design, high dynamics, and decades of experience in the construction of bed milling machines. The machines are impressive due to their high reliability, ease of maintenance, and economical operation. Technical features: Control: HEIDENHAIN TNC 7 CNC path control HEIDENHAIN TFT screen 19" HEIDENHAIN motors, measuring systems and electronic handwheel HR-510 Integrated rotary table: Ø 1,100 mm Cooling: Internal coolant supply (ICS) 36 bar Tool changer: 40-position chain magazine with double gripper Chip disposal: Double-hinged belt conveyor (front and rear) Enclosure: Full enclosure (perimeter) Accuracy: Positioning accuracy: ± 0.015 mm Repeatability: ± 0.008 mm Your benefits with JMT: ✔ Official LAGUN distributor in Germany ✔ Technical support and on-site service ✔ Fast spare parts supply ✔ Training and instruction included ✔ Reference machines available in Germany Contact us – we will be happy to advise you and create an individual offer.

Condition: new, travel distance X-axis: 8,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 3,000 mm, position of the milling head: Universal-Diagonal-Fräskopf, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, feed rate X-axis: 20,000 m/min, feed rate Y-axis: 20,000 m/min, feed rate Z-axis: 20,000 m/min, spindle speed (max.): 6,000 rpm, pivoting range: 1 °, table length: 9,000 mm, table width: 2,000 mm, torque: 1,288 Nm, coolant supply: 36 bar, spindle motor power: 40 W, Equipment: documentation/manual, rotational speed infinitely variable, LAGUN ML 8 Traveling Column Milling Machine The LAGUN ML 8 is a highly dynamic traveling column milling machine for the precise machining of large and complex workpieces. Ideal for single-piece production as well as series production with the highest requirements for accuracy, stability, and flexibility. Your advantages at a glance: ✔ Installation & commissioning in Germany included ✔ Service & spare parts directly from JMT ✔ Lease-to-own / financing options available ✔ High flexibility thanks to the traveling column concept ✔ 24-month warranty Why LAGUN: LAGUN is one of the leading machine tool manufacturers in Spain (MAHER HOLDING) and stands for robust construction, high dynamics, and decades of experience in the construction of milling machines. The machines impress with their reliability, ease of maintenance, and economical operation. Technical specifications: Control: HEIDENHAIN TNC 7 digital control HEIDENHAIN TFT screen 19" HEIDENHAIN motors, measuring systems, and electronic handwheel HR-510 Tool changer: Automatic tool changer (ATC), 60-tool capacity Chip disposal: Hinged belt conveyor Enclosure: Three-sided perimeter enclosure Accuracy: Positioning accuracy: ±0.050 mm Repeatability: ±0.008 mm Your advantages as a JMT customer: ✔ Official LAGUN sales partner in Germany ✔ Technical support and on-site service ✔ Fast spare parts supply Gedpfx Adoh Ekucscsbn ✔ Training and instruction included ✔ Reference machines available in Germany Contact us – we will be happy to advise you and create a customized offer.

Condition: new, travel distance X-axis: 3,200 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,000 mm, table length: 3,000 mm, table width: 1,700 mm, spindle speed (max.): 6,000 rpm, rapid traverse X-axis: 24,000 m/min, rapid traverse Y-axis: 24,000 m/min, rapid traverse Z-axis: 24,000 m/min, table load: 10,000 kg, position of the milling head: Vertikal, workpiece weight (max.): 10,000 kg, torque: 1,392 Nm, overall weight: 30,000 kg, spindle nose: SK 50 - DIN 69871/A, spindle motor power: 53 W, Equipment: rotational speed infinitely variable, STARVISION DX 3220 Portal Milling Machine – available for short-term delivery The STARVISION DX 3220 is a high-precision portal milling machine for machining large and heavy workpieces. Ideal for mold making, mechanical engineering, or contract manufacturing, as well as for demanding machining tasks with high requirements for stability, dynamics, and accuracy. Your advantages at a glance: ✔ Installation & commissioning in Germany included ✔ Service & spare parts directly from JMT ✔ Financing / lease purchase possible ✔ High rigidity for heavy machining ✔ 24 months warranty Why STARVISION: STARVISION stands for modern portal milling machines with high precision and efficient machining. Thanks to its stable portal design, powerful drives, and high-quality components, the machine is ideally suited for demanding applications. Technical features: Control: HEIDENHAIN TNC 7 CNC path control Godpfx Adshy Avpocebn HEIDENHAIN TFT screen 19" HEIDENHAIN motors, measuring systems, and electronic handwheel Cooling: Internal coolant supply (ICS) 70 bar Tool changer: 60-position chain magazine with double gripper Chip removal: Hinged belt chip conveyor (transverse) Double screw conveyor (longitudinal) Preparation: Preparation for 4th axis (rotary table) Enclosure: Full enclosure, closed at the top Accuracy: Positioning accuracy: ± 0.035 mm Repeatability: ± 0.028 mm Your advantages as a JMT customer: ✔ Official distribution partner in Germany ✔ Technical support and on-site service ✔ Fast spare parts supply ✔ Training and instruction included Contact us – we will be happy to advise you and create an individual offer for you.

Condition: ready for operation (used), Year of construction: 2019, operating hours: 2,808 h, functionality: fully functional, machine/vehicle number: NL257181158, turning length: 705 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 795 mm, swing diameter over cross slide: 742 mm, swing diameter over bed slide: 920 mm, New auction due to buyer's payment default! TECHNICAL DETAILS Working Area Swinging diameter over bed max.: 920 mm Swinging diameter over cross slide max.: 742 mm Turning length max.: 705 mm Bar capacity: 80 mm X-axis travel: 260 mm Y-axis travel: 50 mm Z-axis travel: 795 mm Main Spindle Power: 18.5/15 kW Speed max.: 4,000 rpm Chuck size: 10 inches Spindle bore: 91 mm Front bearing diameter: 140 mm Counter Spindle Power: 11/7.5 kW Speed max.: 4,000 rpm Chuck size: 6 inches Spindle bore: 45 mm Front bearing diameter: 85 mm Turret and Axes Tool stations: 12 Arbor cross-section: 25 mm Speed of driven tools max.: 10,000 rpm Rapid traverse X-axis: 30,000 mm/min Rapid traverse Y-axis: 10,000 mm/min Rapid traverse Z-axis: 30,000 mm/min Rapid traverse B-axis: 30,000 mm/min MACHINE DETAILS Control: M730UM with CELOS Dimensions & Weight Machine height: 2,000 mm Footprint: 3,347 x 2,106 mm Weight: 5,820 kg Operating hours: 2,808 h Power-on hours: 11,311 h EQUIPMENT Y-axis Counter spindle Main spindle with 10-inch chuck Counter spindle with 6-inch chuck Chip conveyor Gbsdpfx Aozck Txjdcsn High-pressure coolant system Tool measuring device Parts catcher Workpiece ejector Interface for bar loader

Condition: ready for operation (used), Year of construction: 2019, operating hours: 2,770 h, functionality: fully functional, machine/vehicle number: NL257181158, turning length: 705 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 795 mm, swing diameter over cross slide: 742 mm, swing diameter over bed slide: 920 mm, TECHNICAL DETAILS Working Area Swinging diameter over bed max.: 920 mm Swinging diameter over cross slide max.: 742 mm Turning length max.: 705 mm Bar capacity: 80 mm X-axis travel: 260 mm Y-axis travel: 50 mm Z-axis travel: 795 mm Main Spindle Power: 18.5/15 kW Speed max.: 4,000 rpm Chuck size: 10 inches Spindle bore: 91 mm Front bearing diameter: 140 mm Counter Spindle Power: 11/7.5 kW Speed max.: 4,000 rpm Chuck size: 6 inches Spindle bore: 45 mm Front bearing diameter: 85 mm Turret and Axes Tool stations: 12 Shank cross-section: 25 mm Speed of driven tools max.: 10,000 rpm Rapid traverse X-axis: 30,000 mm/min Rapid traverse Y-axis: 10,000 mm/min Rapid traverse Z-axis: 30,000 mm/min Rapid traverse B-axis: 30,000 mm/min MACHINE DETAILS Control: M730UM with CELOS Dimensions & Weight Machine height: 2,000 mm Footprint: 3,347 x 2,106 mm Weight: 5,820 kg Operating hours: 2,770 h Power-on hours: 10,820 h EQUIPMENT Y-axis Counter spindle Main spindle with 10-inch chuck Counter spindle with 6-inch chuck Chip conveyor High-pressure coolant system Tool measuring device Parts catcher Gbsdsy A Nf Iepfx Adcon Workpiece ejector Interface for bar loader

Condition: used, Year of construction: 2005, operating hours: 24,500 h, functionality: fully functional, machine/vehicle number: 13.TS3.7, JUARISTI Drilling and Table Milling Machine Model: TS3-MG20 Year of manufacture: 2005 Machine overview: The JUARISTI TS3-MG20 is a powerful drilling and table milling machine with a sliding column T-design, designed for demanding applications in heavy-duty machining. The machine impresses with its robust construction made of high-quality GJL 300 cast iron. Steel flat guides in combination with INA-SCHAEFFLER RUS circular roller bearings offer maximum stiffness, highest stability and consistently high precision throughout the machine’s service life. The spindle head is arranged centrally in the column portal and features a combination of sliding guides and pre-tensioned linear guides for maximum stability and dynamics. Main features: • Spindle diameter: 130 mm • Max. speed: 3,000 min⁻¹ • Main drive power: 37 kW • Tool holder: ISO 50 DIN 69871 AD • Travel range Y-axis: 2,000 mm • Travel range W-axis: 800 mm • Travel range Z-axis: 1,800 mm Gbjdpfxezaqine Adcen • Travel range X-axis: 3,000 mm • Rotary table size: 1,600 x 2,000 mm • Max. workpiece weight: 18 t • CNC control: HEIDENHAIN iTNC 530 with HR 420 handwheel • Drive system: SIEMENS Digital Design and construction: Spindle head • Main spindle Ø 130 mm, nitrided and ground • Angular ball bearings • Oil-air lubrication of the spindle bearings • Separate oil circuit for cooling and thermal stabilization • Programmable spindle orientation • 2-stage mechanical gearbox • Hydraulic counterbalancing Guides and axes • Combination of sliding and roller guides with plastic coating (SKC) • Inductively hardened and ground guideways • Ball screw drives with double nut in all axes • Rotary table (B-axis) • Clamping surface: 1,600 x 2,000 mm • 9 T-slots (28H7) • Max. workpiece weight: 18 t • Rotation speed: up to 3 min⁻¹ • Drive via backlash-free double pinion Feed forces and speeds Feed forces • Y-axis: 20,000 N • W-axis: 20,000 N • Z-axis: 20,000 N • X-axis: 25,000 N • B-axis: 35,000 Nm Rapid traverse • Y-axis: 15 m/min • W-axis: 10 m/min • Z-axis: 15 m/min • X-axis: 15 m/min • B-axis: 3 min⁻¹ Working feed rates • Up to 5,000 mm/min (linear axes) Measuring systems • Resolution: 0.001 mm • Linear scales: HEIDENHAIN LS 186 C • Rotary encoder: HEIDENHAIN ROD 880 C CNC control • HEIDENHAIN iTNC 530 • Electronic handwheel HR 420 • Preparation for wireless measuring probe and Ethernet connection Standard equipment Electrical • Control cabinet with heat exchanger • Main switch and safety systems • Infinitely variable drives Hydraulics • Tool clamping/unclamping • Table clamping • Gear shifting Pneumatics • Cleaning of the spindle taper • Compressed air preparation Lubrication & cooling • Central lubrication system • Oil-air lubrication of the spindle • Thermally monitored oil cooler Optional equipment Coolant system • Internal and external • Tank volume: 1,000 liters • External: 40 l/min at 6 bar • Internal: 20 l/min at 15 bar • Paper band filter Tool changer • 60 tools • Max. tool length: 600 mm • Max. tool weight: 30 kg Other options • Spindle support bearing: 500mm • Manual universal swivel head • 2 extension swivel heads • Complete documentation Electrical connection data • Mains connection: 3 x 400 V • Compressed air: 6 bar Standards and conformity • CE conformity 2005