Used Copy Milling for sale (9,929)

Condition: used, Year of construction: 2017, machine/vehicle number: O3pl, functionality: fully functional, power: 0.75 kW (1.02 HP), input voltage: 230 V, input frequency: 60 Hz, type of input current: AC, rip fence adjustment: manual, actuation type: pneumatic, rotational speed (max.): 12,000 rpm, rotational speed (min.): 12,000 rpm, table width: 330 mm, table length: 2,400 mm, total length: 2,600 mm, total width: 800 mm, total height: 1,800 mm, overall weight: 540 kg, PEMAC 03PL 3-head copy milling machine – Year of manufacture 2017 – Ready for immediate use Very well-maintained PEMAC 03PL copy milling machine for aluminum profiles, manufactured in 2017. The machine has always been used in a commercial setting, has been well-maintained, and is in fully working condition. Inspection and test runs are possible. Specifications Year of manufacture: 2017 230V (1-phase) 3 milling heads Spindle speed: 12,000 rpm Working pressure: 6–7 bar Weight: approx. 540 kg Included 35 used and new milling cutters Itedpfx Aozlar Ued Iol Video of the machine in operation available Optionally available: Tekna TK280 punching machine (2012) Compressor Asking price: €6,500. Serious offers will be considered.

Condition: new, Year of construction: 2025, machine/vehicle number: 1110119739228, functionality: limited functionality, overall weight: 100 kg, We are selling, on behalf of and for the account of the relevant party, the following damaged/untested machine to the highest bidder. Functionality is untested. By submitting a bid, the machine is purchased as is, where is. Iedpfx Adjz A R Hze Ietl Key cutting machine Manufacturer: Silca Model: Quattrocode - D700 Weight: approximately 100 kg gross The machine sustained mechanical damage, likely due to a fall or tipping incident. A puncture of the cardboard material is visible on the top of the outer packaging. According to reports, the machine was found loosely placed on a wooden pallet upon delivery. In addition, it was rotated approximately 90° compared to its original packaging arrangement. The angle profiles intended for securing the machine were detached and were no longer in their intended locking position. The rear black plastic cover is partially broken off. Several broken plastic parts were lying loose on the pallet. The transparent, hinged protective cover of the machine has a continuous crack. Furthermore, several cracks can be seen on the housing body in the area of a rear corner. After removing the rear plastic cover, no further damage to the internal components is visibly apparent. A functional test of the machine was not performed. Damage to the internal electronic components cannot be ruled out. Sale basis: loaded onto a truck at the location DE-Velbert.

Condition: used, Copy Milling Machine DECKEL Model: KF 1 Machine No.: 61510 Year of manufacture: 1981 Weight approx.: 1 t Itsdpoz A Hmwefx Ad Iol

Condition: excellent (used), Year of construction: 2002, High-quality copy lathe, woodturning lathe with milling unit, PLC-controlled. A video of the machine in operation can be sent upon request. PLC-controlled wood copy lathe for turning and milling. The machine has two controlled axes: the longitudinal axis and the rotary axis. Input of various feed rates and corresponding lengths for turning, as well as additional divisions and pitches for milling. Several programs for turning and milling operations can be stored. Hydraulic copying of a pattern or template. The roughing and copying tools are equipped with fine adjustments. Template adjustment is possible from the front and rear via fine-pitch spindles. Itsdpfx Adjzfwm Ns Iol The copying length can be divided into up to 6 sections with different feed rates for turning highly contoured workpieces. Drive motor 400V / 3kW with electric motor brake. Two speed stages adjustable via V-belt, within each stage, operation can be continuously adjusted via a frequency inverter. Speed stage 1: 200 - 2000 rpm Speed stage 2: 350 - 3400 rpm Distance between centers approx. 1550mm Copying length with steady rest approx. 1350mm Bed length approx. 2100mm Feed adjustable continuously, rapid traverse with safety end stop. Hydraulic copying slide with V-turning tool. Spindle with M33 thread and MK3 internal taper. Tailstock MK3 and with quick-release mechanism. Extensive accessories: Ring steady rest with front turning tool and insert guide. Four-jaw steady rest. Four-jaw chuck 125mm. Copying tools, center points, hexagonal drive, etc. Milling unit with 3kW motor for mounting on the copying slide. 5 milling heads available, only the 16mm collet is missing. CE marking Operating manual V-belt new Original paint, only a few spots have been touched up. Very good condition, from a small carpentry workshop. The machine was apparently not used to produce large quantities. Dimensions approx. 2600 x 1300 x 1300mm (L x W x H). Weight approx. 800kg. The machine can be demonstrated on-site upon prior appointment. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this provider."

Condition: good (used), Year of construction: 2013, – 2 pneumatic clamps – 12,000 rpm – Mist lubrication system – Weight 180 kg – 230V Ijdpfxjy An U Io Ad Ijtl

Condition: excellent (used), Year of construction: 2008, machine/vehicle number: 1780021272, functionality: fully functional, 3 spindle copy router elumatec KF 178/00 Top routing unit: Cutting range using stops or copy templates 340 x 100 mm Travel 110 mm Bottom routing unit: Cutting range using stops or copy templates 240 x 85 mm Iodpfxezy Stao Ad Istl Travel at front 95 mm Travel at back 45 mm Spindle speed 12,000 rpm Clamping range for profiles 115 x 100 mm Power supply 230/400 V, 3~, 50 Hz Power output per motor 0.74 kW Cobtjzmn N Reiaf Smorg Compressed air supply 7 bar Air consumption per working cycle 12 l without spraying, 24 l with spraying Length 980 mm, depth 1,250 mm, height 1,610 mm, weight 360 kg We can ship the machine to your address.

Condition: good (used), Year of construction: 2021, machine/vehicle number: 178000041, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, rotational speed (max.): 12,000 rpm, total length: 4,000 mm, total width: 1,500 mm, total height: 1,500 mm, overall weight: 500 kg, ELUMATEC KF 178 Copy Milling Machine Itedpfx Adeztwzcj Iol - Rated current: 6.3 A - Power input: 2200 W - Length of the left and right stops: 1600 mm FCA D-73235 Weilheim Teck - loaded onto a truck.

Condition: excellent (used), Year of construction: 1990, machine/vehicle number: 43655, functionality: fully functional, Horizontal cutting range using a stop 230 x 90 mm Horizontal cutting range using a copy template 230 x 90 mm Spindle speed 12,000 rpm Clamping range for profiles 180 x 130 mm Travel 110 mm Power supply 230/400 V, 3~, 50 Hz Power output 0.74 kW Compressed air supply 7 bar Air consumption per working cycle 12 l without spraying, 24 l with spraying Length 720 mm, depth 650 mm, height 1,440 mm, weight 120 kg Isdpezz Aqlofx Ad Istl Versatile for many applications in aluminium and PVC profile machining Precision routing with a minimum of effort and easy, two-lever operation Copy routing at a ratio of 1:1 transfers the cutting pattern from a template to the profile Your own custom templates can be created (by copying the template to a blank) Copy routing using stops is also possible (only rectangular cutting patterns) Can be set up in only a few steps Pneumatic material clamping unit Manual tracer point with three levels for different cutter diameters Pulsed coolant system The machine is ready for operation, we can ship the machine to your address.

Condition: used, Year of construction: 2010, machine/vehicle number: 1780021340, Order No. 26305 Three-spindle copy milling machine Technical data: - Operation via two-hand lever - Material clamping via pneumatic clamping cylinder - Workpiece width / clamping range B 115 x D 100 mm - Milling area above, to stop / copy template B 340 x D 100 mm - Stroke above D 110 mm Itjdpfx Adjzxc Swo Iel - Milling area below, to stop / copy template B 240 x 90 mm - Stroke below, front / rear 95 / 45 mm - Spindle speed 12000 rpm - Metering spray device - Air consumption per working cycle - Without spraying 12 liters - With spraying 24 liters - Left + right original material support - Drive 400 V / 0.75 kW - Space requirement approx. B 900 x H 1400 x D 1250 mm - Weight approx. 300 kg

Year of construction: 1994, condition: used, 3-spindle copy milling machine with stops for aluminum and plastic profiles Maximum spindle speed: 12,000 r.p.m. Stop arms right and left Itjdpfjzvmyyox Ad Ijl Good condition

Condition: ready for operation (used), Year of construction: 1984, Deckel Copy Milling Machine Model KF 3 S Year of manufacture: 1984 Table surfaces: 600 x 555 / 620 x 750 mm Y-axis travel: 150 mm Z-axis stroke: 380 mm X-axis stroke: 150 mm Drive: 3 kW Roughing spindle Isdpfx Ajzwudpjd Istl Finishing spindle Locking arm Control lever with cable Tracing stylus holder Collets Weight: 2400 kg Price: EUR 2,000—plus VAT, ex works

Condition: used, Copy milling machine, copy milling machine, hand lever milling machine, hand lever milling machine -Copy router: Wegoma SK6 Itodpfx Adsd Skkvo Isl -Copy router: swiveling -with support rail length: 1910 mm -Motor: 220 V 1.4 kW -Spindle speed: 22000 rpm -Dimensions: 500/460/H1530 mm -Weight: 46.5 kg

Condition: used, A very rare Hapfo Type AP-9000-M hydraulic automatic wood-copying milling and turning machine for turning round profiles such as balusters, table legs and lamp parts using a copying turning tool, as well as milling profiles using a milling unit and fluting curved workpieces. Sample image! Illustration similar. Technical data: - Centre-to-centre distance: 330 mm - Max. workpiece diameter: 450 mm - Centre-to-centre distance: 4,100 mm - Power consumption: 7.6 kW - L x W x H: 5,800 x 1,100 x 1,500 mm Isdpfx Ajzzkf Red Ietl - Weight: ~ 2,000 kg

Condition: good (used), Pantograph Milling / Engraving Machine Stock number: 3098 Manufacturer: Scripta Machine number: Type / Model: SR 300 Travel range x-y-z: mm Pattern table / working table: 600 x 400 // 600 x 250 mm Speed range: 700 to 18,000 rpm, stepless Transmission: 1 : 1.33 to 1 : 10 Accessories/equipment: Font sets; others (see pictures) Power requirement: kW Itjdpfjy H Hhbjx Ad Iel Condition: good Weight: 0.7 t

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, ELUMATEC AS 170 – Single-spindle profiling machine Technical data Milling area, horizontal, against stop: 300 x 120 mm Milling area, horizontal, using template: 285 x 110 mm Milling spindle speed: 12,000 rpm Profile clamping range: 150 x 130 mm, adjustable up to 400 mm Stroke: 105 mm Electrical connection: 230/400 V, 3 ~, 50 Hz Power output: 0.74 kW Compressed air connection: 7 bar Air consumption per working cycle: 12 l without spray device 24 l with spray device Dimensions AS 170/00 Length: 780 mm Ijdpfx Adeza Iifj Ijtl Depth: 770 mm Height: 1,500 mm Weight: 200 kg Features Large milling area despite compact design Profiling using side stops or templates (1:1) Pneumatic, two-stage tracing device for different cutter diameters Patented suspension of the tracing lever for precise milling Table height adjustment for profiles up to 400 mm high “Spindle Lock” for quick tool changes Pneumatic material clamping device Metering spray device

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, Horizontal cutting range using a stop 230 x 90 mm Horizontal cutting range using a copy template 230 x 90 mm Spindle speed 12,000 rpm Clamping range for profiles 180 x 130 mm Ijdpfx Adsxz Skns Ietl Travel 110 mm Power supply 230/400 V, 3~, 50 Hz Power output 0.74 kW Compressed air supply 7 bar Air consumption per working cycle 12 l without spraying, 24 l with spraying Length 720 mm, depth 650 mm, height 1,440 mm, weight 120 kg Versatile for many applications in aluminium and PVC profile machining Precision routing with a minimum of effort and easy, two-lever operation Copy routing at a ratio of 1:1 transfers the cutting pattern from a template to the profile Your own custom templates can be created (by copying the template to a blank) Copy routing using stops is also possible (only rectangular cutting patterns) Can be set up in only a few steps Pneumatic material clamping unit Manual tracer point with three levels for different cutter diameters Pulsed coolant system Shipping on demand

Condition: excellent (used), Year of construction: 2021, Bed Dimension 1,270mm x 254mm. (3 'T' Slots 16mm x 63mm). Maximum Table Load 350Kg. Axis Travel 'X'=750mm, 'Y'=384mm, 'Z'=406mm. Quill Travel 115mm. Spindle Taper SK30. Spindle Speed Range 60-4,200rpm (Motor 2.25KW). Powered Drawbar. S/No. 13279 (2021) Please note a loading charge of £50 + VAT to be added to buyer's invoice. Itjdpez Dg H Hefx Ad Iel With Coolant System, Quantity Of Assorted Toolholders, Table Guarding, Drawbar, Work Light & Manual. Approx Dimensions L3,220 x W2,580 x H2,180mm. Weight 1,250kg.

Condition: ready for operation (used), Year of construction: 2008, machine/vehicle number: 108/1008-3, functionality: fully functional, power: 4 kW (5.44 HP), total length: 1,750 mm, total width: 1,500 mm, total height: 1,450 mm, overall weight: 750 kg, workpiece width (max.): 180 mm, number of spindles: 2, TECHNICAL DETAILS Number of spindles: 2 Itsdpjy Tnitsfx Ad Iel Max. workpiece width: 180 mm MACHINE DETAILS Main motor power: 4.0 kW Dimensions & Weight Dimensions (L x W x H): 1,750 x 1,500 x 1,450 mm Net weight: 750 kg EQUIPMENT CE marking

Condition: used, Year of construction: 2008, total length: 1,750 mm, total width: 1,500 mm, total height: 1,450 mm, Colour: White Empty weight: 750 kg Price: On request Itedpfx Ajych Eljd Ijl - Year: 2008 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 108/1008-3 - Main motor power [kW]: 4.0 - Number of spindles [pcs]: 2 - Max. workpiece width [mm]: 180 - Transport dimensions: 1750mm x 1500mm x 1450mm (l x w x h) - Transport weight [kg]: 750kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Copy Milling / Engraving Machine Stock number: 3065 Manufacturer: WMW Union Gera Machine number: 11020 Type / Model: FG 250x500-200 Travel distances x-y-z: 280 - 200 - 315 mm Template table / work table: 380 x 380 // 500 x 250 mm Speed range: 2,500 to 20,000 rpm Accessories / Equipment: Font set Power requirement: 0.25 kW Condition: Good Weight: 0.37 t Footprint: 600 x 500 mm Itsdpfxeygcnpo Ad Iol Dimensions: 1,100 x 1,000 x 1,300 mm

Condition: used, Year of construction: 2002, functionality: fully functional, overall weight: 2,100 kg, power: 25 kW (33.99 HP), Industrial copy shaping machine P. BACCI FC2 1600. Manufactured in 2002, weight 2100 kg, power 25 kW. Designed for woodworking (solid wood, furniture components). The machine comes with an Ecosis Soundproof Enclosure (Model CSF) from 2002. Current condition: The machine is dismantled and located in our warehouse. Key Features: Weight: 2100 kg Power: 25 kW Pneumatic vertical clamps Control panel with adjustable feed rates Cutter head with interchangeable HM inserts included Itsdpfx Aozi N Awsd Iol

Condition: like new (used), Year of construction: 2000, machine/vehicle number: 1780020742, functionality: fully functional, The machine was used very little. Top routing unit: Cutting range using stops or copy templates 340 x 100 mm Travel 110 mm Bottom routing unit: Cutting range using stops or copy templates 240 x 85 mm Travel at front 95 mm Travel at back 45 mm Spindle speed 12,000 rpm Itjdpfx Adszmn N Re Iol Clamping range for profiles 115 x 100 mm Power supply 230/400 V, 3~, 50 Hz Power output per motor 0.74 kW Compressed air supply 7 bar Air consumption per working cycle 12 l without spraying, 24 l with spraying Length 980 mm, depth 1,250 mm, height 1,610 mm, weight 360 kg

Year of construction: 2004, condition: used, Speed: 12,000 revolutions per minute Pneumatic material clamping via foot switch Minimum quantity spray device Milling area: 300 x 120 mm Hub: 115 mm Weight: approx. 200 kg Itodpfjzyapcsx Ad Ijl

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Copy milling machine URBAN MLA A23 with centering device, year 2005 Condition: very good Ijdpowhumhsfx Ad Istl

Condition: new, – 2 pneumatic clamping devices – Mist lubrication system Isdjyug Trjpfx Ad Iotl – Emergency stop – Air blow gun – Documentation – 400V